Charger light blinking orange and computer won't start up

My charger on my computer broke a couple days ago so I ordered a new one. While waiting for the battery to come in the mail, the battery on my computer went dead. Now I have the new charger and when I plug it into the computer it blinks orange but never gets a solid orange. Also, the computer will not fire up. Years ago I drained my battery dead and it took a little while charging before it fired back up. I'm hoping its the same problem but it has been over a hour now and still nothing. Anyone have any advise? Thanks

I just came back from the Apple Store.  They think that the Logic Board is the issue and possibly other issues (They didn't say what).
Below is a chart of what they will charge me to fix it.  This includes any defective parts, a 90 day warranty and re-imaging the machine I am told.  This is far less expensive than I can do it myself for.  I can't even find a logic board that is in stock for less than $449.
I will update you if this changes.  I strongly encourage you to goto your local Apple Store and work with them and most of all be polite. 
Item Number
Description
Price
Amount Due
Customer KBB
S1498LL/A
Labor Charge, IB/MB/MBAIR
$ 100.00
$ 100.00
S1517LL/A
Flat Rate Repair Charge, IB/MB/MBAIR
$ 180.00
$ 180.00
Total (Tax not included)
$ 280.00
$ 280.00

Similar Messages

  • My ipod shuffle 1st generation won't restore. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?

    So it's the little thin ipod with no screen...that has the usb thing and the landyard. Whenever I try restoring it it tries to restore and then a message pops up. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?. I have literally tried restoring it like 10 times and nothing happens. When i connect headphones it does not hear and that little light think happens....which i had never seen happen before. I need to fix it. ....please help....if i take it to an apple store....will it cost alot to fix that?

    reset utility should help...for mac
    http://www.apple.com/support/downloads/ipodresetutility103formac.html
    for windows
    http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

  • Firmware update progress bar appears and computer won't start up

    Hi,
    I am on OS X 10.6 (the latest developer build, whose build number I can't remember and can't look up because my computer won't start up) and this morning when I tried to start up my computer, it chimed, the apple appeared but then a grey progress bar (like the one that appears during a firmware update) appeared at the bottom of the screen along with the customary spinner. This progress bar didn't update and after 10-ish seconds, it disappeared and left just the spinner. I left the computer in this state for 4 hours and nothing happened. It still starts up in single user mode (but I can't seem to get Open Firmware mode to load) and it starts Windows XP on another partition of my main HD.
    When I start it in verbose mode, it says that my catalog B-tree has keys out of order and it is unable to repair them. Also, I get an error message from launchctl: "Bug: launchctl.c:2033 (23930):17: auditquickstart() == 0". Then later on it tells me to convert a few system plist files to launchd (all in the /etc/mach_init.d/ folder). The very last line says "launch_msg(): Socket is not connected".
    I would rather not re-install the system, but if I have to, I guess I will. I appreciate any light that anyone can shed on this problem.
    Thanks,
    Kyle

    Yes, they (the third-party utilities) both come on bootable DVD's. As I mentioned, since Snow Leopard was just released in its final version, the developers may be in the process of releasing updates.
    Your situation is likely to be a case where the data corruption issue already existed before installing Snow Leopard, and the installation process made the problem more apparent (because something critical was installed where it was affected by the data issue).
    It is a good idea to run +Repair Disk+ in Disk Utility on the startup volume before installing a major system update. Actually, I do it before any system-level update.
    You should also have a backup (at least of your personal data if not the entire volume), in case something bad happens during a major system upgrade. If you were using Time Machine, the easiest recovery would be to reformat the internal drive and use the Time Machine complete volume restore utility to restore the volume back to the date/time state just before you installed Snow Leopard. Then, after restarting from that restored volume to make sure everything is working, start up from the Snow Leopard installation disc, run Disk Utility and use +Repair Disk+ (just to be sure), and run the upgrade to Snow Leopard again.
    If you have a backup of at least your personal data, you may want to reformat the internal drive, install Snow Leopard and bundled apps, install your third-party apps from their original sources, update everything that needs updating, and restore your personal data.
    If you don't have a backup, the best bet is to try either DiskWarrior or TechTool Pro. DiskWarrior is very specialized into repairing this type of data problem. TechTool Pro has similar capability, but it is a more general tool with other features.

  • MacBook not charging. Charging light blinks red and green (very low) than green in normal charge.

    My MacBook's battery is dead. When I plug the charge the charging indicator blinks with dim red and green light instead of bright green light. Please help anyone has a solution to it. Last time I remember tye battery was 46%. I plugged in charger and put my iPhone and power bank in charge in Mac USBs. After hours I found that neither phone and power bank was charged nor Mac. Instead Mac's battery was also empty.

    Hi harry.ptk,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues charging your MacBook Pro. The following resource may provides steps for these sort of issues:
    OS X Yosemite: If your battery won’t charge
    http://support.apple.com/kb/PH18601
    - Reset the battery:
    If you have a Mac with a removable battery, remove it and install it again, to make sure it’s properly installed. Refer to the manual that came with your Mac for more information about properly installing the battery.
    - Reset the SMC:
    Reset the System Management Controller (SMC), which controls how your Mac manages power. For more information, see the Apple Support article Resetting the System Management Controller (SMC).
    - Get your Mac serviced:
    If the battery still won’t charge, your Mac may need to be serviced. Take your Mac to your local Apple Store or contact AppleCare.
    - Matt M.

  • Power Mac G5: Status light is solid but computer won't start

    My Power Mac G5 was sleeping all day when the power went out. Since then the status light is solid when plugged in to the wall but nothing happens when I hold the power button down. I tried disconnecting the power cable and then plugging it back in but the status light comes just comes back on and the fan doesn't run. The computer is completely unresponsive. Does anyone have any ideas?

    Hi! Have you reset the smu? Some early G5's had the button on the motherboard and if not required to unplug everything and let it sit for 30 minutes or so. Tom
    Button type
    http://img95.imageshack.us/img95/1802/g5logicbd6sx.jpg
    Message was edited by: Thomas Bryant
    Message was edited by: Thomas Bryant

  • My shuffle is blinking orange and won't charge

    My ipod shuffle is blinking orange and won't charge.

    Blinking orange means "do not disconnect."  It may or may not be fully charged. 
    If you have the shuffle set to Manually manage music or Enable disk use, the light will blink orange until you eject the shuffle.  This is because, with those setting, the system has continuous access to the iPod (as a "disk"), so the iPod is technically "in use," even if it is just sitting there. 
    To eject the shuffle, there is a small eject button (it has a triangle with a line under it) next to the shuffle's name in the iTunes sidebar (under DEVICES).  Click that button to eject the shuffle.  If the battery is fully charged, the lighit should turn solid green (not blinking).  Not blinking means "OK to disconnect" it from computer.

  • I am using apple iPod-suffle model and I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution

    I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    Wrong forum. This is the iPad forum.

  • Computer won't start and light just flashes as if in sleep mode. Does not even make the start chime. displays remain dark.

    Computer won't start. sounds like it makes an attempt at accessing a hard drive. but then just goes to sleep. no start up noise. no displays come on.

    Resetting SMC could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • HELP! Battery drained and now, even with a power plug, computer won't start

    My battery drained completely...and I went to charge it. When I plug the power cord in, it shows "green" not "red." When I remove the battery and just plug in the power cord, the computer won't start either.
    Anyone encounter this before after a full battery drain? It's very odd.

    I had the same green light non-charging problem. Turns out, I had to replace my wall adaptor. A dealer will have a good power supply you can try.
    Wayne

  • My mac desktop computer won't start and just beebs

    My mac desktop computer won't start it just beens loudly.   I don't have any lights showing on the keyboard but can hear the drive switching on.  I have unplugged the computer, waited and replugged and waited and then turned it on again without and results.  Please help.

    Use this tip to identify your Mac:
    https://discussions.apple.com/docs/DOC-6413
    If indeed it has a PowerPC processor (the PowerMacs use that, and have been around since early 2006 simultaneously with some of the Intels), see this tip on beeps:
    Power On Self-Test Beep Definition - Part 2
    If it is Intel, see this tip:
    Mac computers: About startup tones

  • Macbook Pro charger light is orange.

    Macbook Pro charger light is orange. I has always been green before. This time I got a "low battery" warning at about 20%. When I plugged in charger it went immediately to zero and the light is orange. Problem?

    http://support.apple.com/kb/HT1490
    Note that if your machine has a built-in battery, it doesn't need to be calibrated.

  • My HP Pavilion dv9700 will not power up. Lights blink on and off on a cycle, but screen is black

    My HP Pavilion dv9700 will not power up.  Lights blink on and off on a cycle, but screen is black.

    Please post your Full Product Number
    http://h10025.www1.hp.com/ewfrf/wc/findModel?lc=en&dlc=en&cc=us

  • My phone turned off out and it won't start again, and it was fully charged. How can I fix it?

    My phone turned off out and it won't start again, and it was fully charged. How can I fix it?

    Thank You! It worked

  • Mountain Lion update, and now computer won't start up?

    Writing this for a friend, as his computer is inop at the moment.  Hence this message. 
    He has a new 27" iMac.  He upgraded to Mountain Lion a few weeks ago, and then had intermittent problems with apps unexpectantly shutting down. 
    Now he did a ML update this morning, and his computer won't start up.  It gets to the point of the Apple logo coming up, a progress bar, and then the spinning wheel, but then shuts itself down right afterwards.
    A safe boot yields the exact same result.
    Any thoughts out there on what he could try to get it up and running again?
    Thanks much for any and all help. 

    Thank you for the fast response.
    He was able to get into Disk Utility with the Command and R keys, but when he tried verifying the disk, in red it said 'Invalid Node Structure, volume could not be verified completely'.
    He went ahead and verified it anyway, then proceeded to repair it.  Howver, it stopped repairing, said it cannot repair, and that he should back up files and reformat the disk.
    How can he back up his files?  He cannot see a way to do it.  Is there anything else he can do besides having to reformat the disk? 
    This is his first Mac (after much prompting from me to go Mac), and he's afraid he's now lost everything on there.

Maybe you are looking for

  • Ipod "cannot read or write to___'s Ipod"

    Hey, I'm getting a very frustrating error... and was wondering what on earth it means... and why I can't use any more than 2.89 Gigs of my 60 gig ipod... after trying to place more on it... pretty much of anything... it says that it can't read or wri

  • SAP Script   ADDRESS....ENDADDRESS

    Hi, I have the following code in one window of my SAP Script /: ADDRESS /: NAME &SHIPINV-S2NAME1&, &SHIPINV-S2NAME2&, &SHIPINV-S2NAME3& All other address nodes /: ENDADDRESS All the 3 names are printed successfully. Now i want to add &SHIPINV-S2NAME4

  • GPU acceleration not activated on linux/intelivybridge

    Firefox has alaways been slow on my intel ivybridge celeron ( ubuntu 14.04) and here is what I get from the about:support How could I activate the GPU acceleration ? it works on Chrome. Graphics Adapter Description Intel Open Source Technology Center

  • Essbase XMLA - MDSCHEMA_HIERARCHIES Rowset - DIMENSION_TYPE issue

    Hi All, I m using XMLA interface of essbase 11.1.2. As specified in aps docs essbase supports 3 dimension types . TIME: MD_DIMTYPE_TIME ACCOUNTS: MD_DIMTYPE_MEASSURE ALL OTHER: MD_DIMTYPE_OTHER While querying MDSCHEMA_HIERARCHIES Rowset , in the resu

  • I had to restore my ipad2 - do I have to repurchase my apps?

    I had to restore my ipad2 and my apps were lost, do I have to repurchase?