Charger not going in

So a few months ago, I got a laptop that came with a charger.   The laptop was a hp pavillion and the charger and the laptop worked extremely well! But recently I tried to plug the charger into the laptop and it was not going in.  I had to hold it to make it charge but thats only rarely that it charges! I really want to know what to do! Thanks hope you can help!

"Not going in"; by that do you mean the AC adapter male plug or the electricity? Can you maybe try to help us by providing the model number? This will help us get a mental picture of what you are asking about. 

Similar Messages

  • Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

    hellow
    my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

    Hi there shehla sattar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W.

  • Am going on a trip for 1 month and am not going to use my iphone during this period so should i charge it full and turn it off or keep it on till the bettery dies or what ,,,pls help???

    Am going on a trip for 1 month and am not going to use my iphone during this period so should i charge it full and turn it off or keep it on till the bettery dies or what ,,,pls help???

    Discharge it to around 50-60% then completely shut it off. Store at around room temperature. When you return connect the charger and let the battery fully charge.

  • HT4367 Whenever I try to rent a movie, Apple TV buffers and does not come back.  I am able to see other programs, but not able to rent movies.   And the movie charge still goes on my bill.

    Whenever I try to rent a movie, Apple TV buffers and does not come back.  I am able to see other programs, but not able to rent movies.   And the movie charge still goes on my bill.

    Apple TV uses iTunes. The reason you can't rent through your ATV is because you can't rent movies through iTunes Canada. Sadly, as this is a user-to-user forum, no one here would know when or if rentals will come to Canada.

  • Hello, i have received an ipad and it is not going to well. i will be charging it for 5  hours and when i unplug it, it says it is still not charged. anybody know what is going on?

    hello, i have received an ipad and it is not going to well. i will be charging it for 5  hours and when i unplug it, it says it is still not charged. anybody know what is going on?

    Same problem for me.
    1. Cannot connect to wifi as icloud password pop up keeps appearing.
    2. tried deleting account. UNable to do so.
    3. tried resetting password by logging into apple id through desktop as mentioned in one of the responses in another thread. Unfortunately the apple id to be reset is the same as being prompted by icloud and hence unable to reset the same.
    Feel like breaking the **** ipad into bits. Stupid of apple to let such a bug in and not offer support !!

  • HT201303 I bought a new iphone4 and had to reload my songs and apps. I want to make sure I'm not going to be charged again for songs or apps I had already purchased.  Thank you.

    I purchased a new iphone4 and had to reload my songs and apps.  I want to make sure I'm not going to to be billed a second charge for songs or apps I have already purchased.  Thank you,

    If you bought them again, then you will be charged.
    If you redownloaded them properly then you will not:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

    I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

    You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

  • Intermittent problems with iphone 3g "charging not supported"

    I notice quite a few complaints about intermittent 'charging not supported' messages.
    I have been getting the same message on my iphone 3g.
    I have ELIMINATED the cord and plug as the problem in this case by the following method:
    I found that by LOWERING the line voltage to the charger with a variac, I could get rid of the message RELIABLY for a period of time.
    By turning the variac off and on, and by varing the voltage setting, I can reproduceably get either charging or 'charging not supported'.
    Since there are no changes being made in the connections to the phone and charger, I eliminate them as causing to the problem.
    I suspect a deteriorating component in the charger is reporting some kind of error to the phone via some communications channel.
    I have not tried opening the charger, but if and when it finally dies, I will do so.
    This morning, the charger worked with the variac set to 80 volts.
    Anyone on the design team around that can suggest other tests?
    -bz-

    The unit finally failed and I opened it up. It appears to consist of an AC-->dc converter with suitable filters and regulators and a small computer that probably talks via I2C or a similar protocol to the iphone.
    I suspect that components are defective and the output voltage is outside the range it thinks it should be or some problems with the communications cause it to send an erronious message in response to the query sent by the iphone. I did NOT see any obviously bulging electrolytic capacitors, but I did not test for high ESR and I suspect that is the problem.
    A 'off brand' AC Charger of iPod and iPhone from Radio Shack works fine while BOTH authentic APPLE iphone 'tiny cube' chargers are going for recycling.
    Software fixes may cause the iphone to either keep trying until it gets the right response or ignore the erronious responses.

  • IPod not going to sleep correctly

    Hi there,
    I am having an issue with my iPod 5G not going to sleep correctly. When I select the "Sleep" function on the menu screen the iPod with stop responding to the wheel, as per normal, BUT the screen only fades and does not blank itself completely. I can still see the menu items.
    Is this right? I though the screen blanks completely, to save on battery power.
    Advice and thoughts needed...cheers
    iPod 30Gb 5G   Windows XP  

    Hi, I have managed to change the battery of my Ipod
    mini, but still after the Ipod is fully charged the
    battery life still lasts only a few hours....
    My assumption after reading all the technical
    documents, is that even though the Ipod mini appears
    to go to sleep (either by itself or after the play /
    pause) button is pressed for a few seconds, that in
    fact the Ipod isn't a sleep and the battery runs
    down....
    I have updated to the latest 1.4.1. software... only
    recently happened, and replaced the battery (but
    perhaps it didn't need it).
    And it's 14 months old so out of warranty...
    Does anyone know of issues with sleep mode not
    working correctly? Is there a software fix for
    this????
    Cheers
    I think I'm having the same problem - let me know if you find an answer and likewise I'll do the same. Is going to sleep the same as turning off? Mine doesn't even turn off when I press down the play/pause button!

  • Pavilion dv6 charging not charging

    My laptop is doing this thing where it charges then doesnt. it will flash the, charging, not charging , to just not charging at all. and it does this until my computer just dies.  its been going inbetween doing this, and working perfectly fine. pretty positive my computer is filthy also. any ideas as to whats happening?  

    Hi
    Please try the following link given below might help you.
    Using and Testing the AC Power Adapter
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Lumia 920 Wireless Charging not working - Known is...

    I have a Nokia Lumia 920, which works perfectly fine. I haven't had some of the other issues reported here with freezing, apps, etc.
    I have a Nokia charging plate and I've found that no matter what I do the wireless charging plate absolutely does not work. I've turned off Bluetooth, Wifi, turned ON Battery Saver, disabled every background app, even hard reset my phone and tried charging it from stock. The wireless charging plate doesn't even maintain the current battery state - The battery slowly drains hour by hour. I've also tried placing the phone on the charging plate in different positions to ensure it's making good contact. Nothing works.
    Is this a known issue? Is there anyway to identify a defective phone? Is there a possible fix for this? I love my Lumia, but this a killer feature I would expect to work consistently.

    OK, this thread is odd. My charging plate works fine. It has a side with a little ring and Nokia in it, and the other side has an oval of rubber around the periphery with the usual conformance writing on it that side Qi, CE, don't throw it on the trash icon,  Mine works just fine with the Oval down, and the Nokia in the ring up. Is that not what others see?
    I can turn it over, but it is touchy as to whether I can get the light to come on. Usually not. I assumed, initially, the oval went down to keep it from sliding around on the table, and Nokia went up because they want you to know it's Nokia. Has always worked that way. I wish there was a larger rubber something on the 'top' as the phone can slide and spin more than I think it should.
    For what it is worth, I much prefer the charge stand, but the plate is more convenient if I am going to travel somewhere for a while. Couple of days, just charger, week or so, might bring the plate for the hotel.
    BTW, I do get the connect noise when putting it on the charge plate. Sometimes it can take a second otr two. When I take it off, it can take several seconds to get the disconnect noise and the charging icon to go away. If I put it back on the charger before the disconnect noise and the charge icon goes away, it does NOT make a connect noise, though the light comes on. The light will also eventually go off at full charge.

  • Nokia 6500 - charger not supported

    just bought a nokia 6500 classic. first thing i know when i plug in the charger, i get a message "charger not supported". this is bizarre. nothing wrong with the charger itself, it seems, but a software quirk? anyone else with the same problem?

    I have a really bizarre problem:
    I bought the Nokia 6500 classic out of o2 earlier this year.
    My Dad also has the same phone but on T Mobile.
    Last night both our phones were low on battery, we use the same type of charger but have one each.
    When we plugged our phones in we both got a message on our phones saying 'charger not supported'.
    We swapped chargers but got the same message, I've tried charging the phones through the USB cable but this hasn't worked either, have taken the batteries out and put them back in but that was just wishful thinking, have left the phones on charge for hours and still nothing.
    Both phones are completely dead now apart from the occasional flash and then the screen just goes black.
    I've called o2 who have no idea what the problem is and have said to bring it into the shop, I also called T Mobile on behalf of my Dad who said the same thing.
    I tried calling Nokia but just got an ear piercing fax machine sound.
    My worry about taking them into the shop is that most likely they'll get send away and we'll have to wait decades to get the phones back or we'll be accused of dropping the phones etc.
    The thing is, it's nothing that we've done to the phones as this happened to the same phones on the same night at the same time and that's just too bizarre.
    If anyone can help it would be greatly appreciated!!!
    Thanks!

  • Payment Term from Vendor is not going to Freight PO

    Hello All,
    I am not MM consulting but I need to solve a problem.
    As we know when I save a shipment cost document SAP creates a automatically PO for carrier as the configuration.
    I have the payment terms registered in the Vendor Master (Carrier) but when I save my ship cost document and the system creates the PO the payment terms it is not appearing in the PO and consequently is not going to MIRO.
    How should I do to take the Vendor Payment Term to the Freight PO?
    Thanks
    Marcos

    Hi,
       Ensure that the payment terms is maintained in the purchasing view in MK02 for the same purchasing organization.
       If its maintained, the same will be displayed in the automatic PO as well. If its not copied, please create a normal PO in ME21N and check whether the payment term is displayed in header - Delivery / Invoice tab.
       If you are in old release, refer the note: 358506 - Auto Service PO Creation - Passing Values into the Function
       If you are using TM system, refer the note: 1897588 - Payment terms not copied from Vendor master to PO
        If the notes are not valid, then you may check for OSS notes or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • HT1386 I have IPod touch running iOS 5.1.1 and Windows 7 with iTunes 11.0.4.4. When I connect the IPod to my PC, iTunes recognizes it but before synching can get very far, it is interrupted by "charging not supported on this acc." Now what to do?

    I'm having trouble with the wi-fi synch for iTunes and would be happy if I could just synch by the USB cable. With the new iOS, the connection to iTunes seems to get broken every time the dreaded "charging not supported with this accessory" appears, which is only a few seconds into the synch. Since my PC is obviously not an Apple brand charger, IPod won't stop producing this message. Using the Dismiss button doesn't resolve the issue because synch has already stopped. It looks like the hardwire to PC option is now dead.

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • Videos Not Going On Macbook Pro

    I got a macbook pro in March before I left for vacation. I've been working on putting pictures and videos from a hard drive(I think lol) on to the macbook pro, but the problem is the videos won't go. Pictures go fine. is there a way to get videos to go on it. videos from ipod touch, and iphone go on fine. just on the hard drive not going on. Not a big deal, just hoping to get some of my videos on it for a project. If I can't I'll just use pictures and make a slideshow that way and use my other program on regular computer for videos

    I just purchased a 13" Mid 2012 MB Pro, first time on YouTube, the videos would not play, google "Adobe Flash", download and install the player and you should be good.

Maybe you are looking for

  • PSE 8 constant error message

    Just got a brand new iMac and finally able to install PSE 8. I am constantly getting this error message: "This is not a valid Portable Document File (PDF) document. It cannot be opened." I get it when I first launch PSE and haven't even opened anythi

  • Integration Component error: 403

    Hello, I recently installed SAP B1 8.8 PL18 (on  a 64bit machine), and the standalone B1 integration component. I followed the installation guide perfectly, and still receive an error whenever I try to use my dashboards, or open the integration frame

  • ATI card + OS driver + multi monitor

    Hello everyone, I'm stuck configuring the RadeonHD drivers for multi monitor setup. The system starts with both screens cloned; logging in is in clone mode too. After that the second display is being turned of (no signal). Using xrandr --auto will en

  • How to change infoobject descriptions in a query after change the infoobjec

    Hi all, Imagine that you have 200 queries in production and need to change some descriptions in 2 infoobjects. eg: Infooject 1 = "Customer Sales View" Changed to    "Cust.View of New MKT" Infooject 2 = "Material for sales" Changed to    "Material" Is

  • Can i use 10.5 or 10.6 on my PowerMac G5 1800

    Can i use 10.5 or 10.6 on my PowerMac G5 1800