Charger Part-Numbe​r for HP Web OS Touchpad

Hello, My wall charger is not working for my Web OS touchpad, and I would like to order a replacement. Would really appreciate if someone could provide me with the part number and where to order it.
This question was solved.
View Solution.

The TouchStone was/is a great idea from Palm Inc. - I use two of them.
The TouchPad has coils mounted in the back of the unit that transfer current to the battery when the device is lying in the cradle. Similar to holding a balloon that has been rubbed with wool over your arm - you can feel the static electricity charge moving the hair on your arm.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • What's the part number/details for the AC Adapter for a HP G61-456EE Notebook PC?

    I'm based in the UAE and I have a G61-456EE Notebook PC. I need to order a replacement AC Adapter since I've misplaced mine and I can't seem to find the specific model/part number in the HP Parts Store. Can someone please advise me on which particular adapter is required for my PC and the necessary instructions on ordering one?

    here is the part # for your computer, choose from two, only diffrence is 90 watt and 65 watt and both can work for you.
    463958-001 SPS-65W ADPTR,
    463955-001 SPS-90W PFC ADPTR,
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • I need to know what the part number is for a replacment hard drive chasis - 8460p

    I need to order a replacment chassis that the hard drive screws into for the 8460p, does anybody know the part number for this piece?

    Hi:
    You are going to have to contact HP for that--1-800-334-5144.
    The only parts listed in the service manual are for the actual hard drives.
    Paul

  • Car Adapter Part Number needed for Qosmio G20-110

    Hi,
    I need a car adapter for my G20-110, but can't find any info anywhere on the Toshiba web site.
    The AC power supply has 4 pins, so one of the cheap jobs from Maplins won't fit.
    Any ideas??
    Many Thanks
    Richard

    Hi
    I assume you dont know the Toshiba Options and Accessories website.
    On the Toshiba Europe site you can find this page in the Products:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/home.do?service=EU&from=http%3A//www.toshiba-europe.com/
    On the Toshiba Options and Accessories page you can find supported and compatible additional devices for every Toshiba notebook.
    You should also know that Toshiba authorized service partner in your country sells also the compatible parts.

  • Content Search Web Part not work for Office Web Apps

    Hi ,
    In Content Search Web Part word documents are not able to open in browser,but in document library  its working.
    Office Web Apps not work in Content search web part
    Please help me
    Regards
    Sachin

    Below is the display template to open the document in OWA.
    <html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882"> 
    <head>
    <title>AdSpace Picture on top, 3 lines on bottom</title>
    <!--[if gte mso 9]><xml>
    <mso:CustomDocumentProperties>
    <mso:TemplateHidden msdt:dt="string">0</mso:TemplateHidden>
    <mso:ManagedPropertyMapping msdt:dt="string">&#39;Picture URL&#39;{Picture URL}:&#39;PublishingImage;PictureURL;PictureThumbnailURL&#39;,&#39;Link URL&#39;{Link URL}:&#39;Path&#39;,&#39;Line 1&#39;{Line
    1}:&#39;Title&#39;,&#39;Line 2&#39;{Line 2}:&#39;Description&#39;,&#39;Line 3&#39;{Line 3}:&#39;&#39;,&#39;FileExtension&#39;,&#39;SecondaryFileExtension&#39;,&#39;ContentTypeId&#39;,&#39;ServerRedirectedURL&#39;</mso:ManagedPropertyMapping>
    <mso:MasterPageDescription msdt:dt="string">This Item Display Template will show a 304x100 picture of the item on top. The title and the default item description will display to the bottom of the picture with an additional line that is available
    for a custom managed property.</mso:MasterPageDescription>
    <mso:ContentTypeId msdt:dt="string">0x0101002039C03B61C64EC4A04F5361F385106603</mso:ContentTypeId>
    <mso:TargetControlType msdt:dt="string">;#Content Web Parts;#</mso:TargetControlType>
    <mso:HtmlDesignAssociated msdt:dt="string">1</mso:HtmlDesignAssociated>
    <mso:_dlc_DocId msdt:dt="string">ZRMVMDDDEAE7-1-215</mso:_dlc_DocId>
    <mso:_dlc_DocIdItemGuid msdt:dt="string">583b0835-32ff-4d1c-983f-b6ff4a0ef956</mso:_dlc_DocIdItemGuid>
    <mso:_dlc_DocIdUrl msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_layouts/15/DocIdRedir.aspx?ID=ZRMVMDDDEAE7-1-215, ZRMVMDDDEAE7-1-215</mso:_dlc_DocIdUrl>
    <mso:HtmlDesignConversionSucceeded msdt:dt="string">True</mso:HtmlDesignConversionSucceeded>
    <mso:HtmlDesignStatusAndPreview msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_catalogs/masterpage/Display Templates/Content Web Parts/Item_PictureOnTop.html, Conversion successful.</mso:HtmlDesignStatusAndPreview>
    </mso:CustomDocumentProperties>
    </xml><![endif]-->
    </head>
    <body>
        <!--
                Warning: Do not try to add HTML to this section. Only the contents of the first <div>
                inside the <body> tag will be used while executing Display Template code. Any HTML that
                you add to this section will NOT become part of your Display Template.
        -->
        <script>
            $includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
        </script>
        <!--
            Use the div below to author your Display Template. Here are some things to keep in mind:
            * Surround any JavaScript logic as shown below using a "pound underscore" (#_ ... _#) token
            inside a comment.
            * Use the values assigned to your variables using an "underscore pound equals"
            (_#= ... =#_) token.
        -->
        <div id="Item_PictureOnTop">
    <!--#_
    var useWACUrl = !$isEmptyString(ctx.CurrentItem.ServerRedirectedURL);
            if(ctx.ScriptApplicationManager && ctx.ScriptApplicationManager.states){
                useWACUrl = (useWACUrl && !ctx.ScriptApplicationManager.states.openDocumentsInClient);
            var appAttribs = "";
            if(!useWACUrl)
                if (!$isEmptyString(ctx.CurrentItem.csr_OpenApp)) { appAttribs += "openApp=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenApp) + "\"" }; 
                if (!$isEmptyString(ctx.CurrentItem.csr_OpenControl)) { appAttribs += " openControl=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenControl) + "\"" };
            var url = ctx.CurrentItem.csr_Path;
         if($isEmptyString(url)){
                if(useWACUrl)
                    url = ctx.CurrentItem.ServerRedirectedURL;
                } else {
                    url = ctx.CurrentItem.Path;
    var encodedId = $htmlEncode(ctx.ClientControl.get_nextUniqueId() + "_pictureOnTop_");
    var linkURL = $getItemValue(ctx, "Link URL");
    linkURL.overrideValueRenderer($urlHtmlEncode);
     var iconURL = Srch.ContentBySearch.getIconSourceFromItem(ctx.CurrentItem);
    var line1 = $getItemValue(ctx, "Line 1");
    var setLineHeightRenderer = function(valueInfoObj)
        if(!$isNull(valueInfoObj) && !valueInfoObj.isEmpty)
            if(!$isNull(valueInfoObj.defaultValueRenderer))
                return valueInfoObj.defaultValueRenderer(valueInfoObj);
            else
                return valueInfoObj.toString();
        else
            return "&nbsp;";
    var line2 = $getItemValue(ctx, "Line 2");
    line2.overrideValueRenderer(setLineHeightRenderer);
    var line3 = $getItemValue(ctx, "Line 3");
    line3.overrideValueRenderer(setLineHeightRenderer);
    var pictureURL = $getItemValue(ctx, "Picture URL");
    var pictureId = encodedId + "picture";
    var pictureMarkup = Srch.ContentBySearch.getPictureMarkup(pictureURL, 304, 100, ctx.CurrentItem, "cbs-pictureOnTopImg", line1, pictureId);
    var containerId = encodedId + "container";
    var pictureLinkId = encodedId + "pictureLink";
    var pictureContainerId = encodedId + "pictureContainer";
    var dataContainerId = encodedId + "dataContainer";
    var line1LinkId = encodedId + "line1Link";
    var line1Id = encodedId + "line1";
    var line2Id = encodedId + "line2";
    var line3Id = encodedId + "line3";
     _#-->
            <div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
                <div class="top-content-img" id="_#= pictureContainerId =#_">
                    <a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
                        _#= pictureMarkup =#_
                    </a>
                </div>
                    <h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
    id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>      
                    <span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
    alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>                
            </div>
        </div>
    </body>
    </html>
    Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
    Problem solved.
    Nehal Bhandari,ATL, Nagarro Softwares

  • Sony CFD S300. What is the part number for the optical pick up? How do you replace the optical pick

    Hi. Apparently none of the links work on the sony site for this product (Sony CFD S300 CD Radio Cassette Recorder). Does anyone know what the part number is for the optical pick up (laser)? They have them on eay for around $10 but i do not know which one to get. Also anyone have directions on how to replace it? There is a soder ball somewhere too. Thanks!!

    Hi LifelongCamper,
    There are two Optical pickups available for the CD player. Part #s of the Optical pickups for this CD player are 882016102 and 884848312. You can purchase “882016102” from below provided link:
    https://servicesales.sel.sony.com/ecom/accessories/web/shoppingCart.do?operation=addToCart&itemId=12...
    Instructions to replace internal parts of the CD player are not made available to end users.

  • What is the keyboard part number for Portege Z30-A-1E5?

    Hello,
    I want the Toshiba Portege Z30-A-1E5, but it is apparently only available to buy from German and Austrian vendors with the QWERTZ keyboard. I would like to buy one and swap over the keyboard to either AZERTY or QWERTY (UK).
    However I spoke with a company that does this and they cannot confirm that they can get a part unless I can provide them with a keyboard part number (they also can't give me a quote without it), but this number does not seem to be easy to get a hold of without actually having the computer and taking the keyboard off and looking underneath! I feel a bit nervous spending so much money when there is a chance that I won't be able to swap the keyboard over.
    So my question is, can anybody tell me what the keyboard part number is for the portege z30-a-1e5?
    Any assistance would be much appreciated!!!!!
    Kate

    Hi Kate
    Im wondering why you want to purchase a Portege Z30-A-1E5 which isnt available in UK?
    The notebooks are preinstalled with a Windows system in different languages. In case of Portege Z30-A-1E5 available in Germany, the system language would be German.
    Also the keyboard supports different layout.
    Portege Z30-A-1E5 was equipped with an i7 CPU, 512GB SSD drive and 16GB RAM.
    Very similar notebook Portege Z30-A-1D6 was released in UK. Its preinstalled with Windows system in English language and English keyboard layout.
    Of course the hardware specifications are a little bit lower (256GB SSD drive and 8GB RAM) but I think this could be upgraded much easier as to replace the keyboard.
    However, in case you would purchase the Portege Z30-A-1E5, I recommend you to contact the Toshiba authorized service provider in your country for keyboard replacement. The guys could order the right keyboard from Toshiba and could perform the replacement.
    Just one note: the replacement should be done by authorized service provider because of warranty validity. The replacement must be performed by authorized engineer to keep the warranty valid.

  • Replacement Hard disk for Portege P2010 - Part number required

    Can anyone tell me what the part number is for a replacement Hard disk for Portege P2010 is? It has the latest BIOS installed, can the HDD capacity be higher than the original 30gig?
    Thanks
    Martin

    Hi
    Like Ivan said, there are no officials documents about a max size of a HDD.
    I assume that you can use a 40 GB HDD but Im not 100% sure if the bigger HDDs will work.
    Please check this link:
    http://www.sparepartswarehouse.com/devicetype-vendor-modelline-modelseries-partlist.aspx?devicetype=0&vendorlevel=ModelSeries &modelseriescatid=50972&partcatid=140744&filter =0
    There you will find a 40GB HDD for Protg 2010.

  • Mid-2010 MacBook Pro 15" 2.8 GHz Logic Board Part Number

    Hi all,
    I have been searching for a few hours trying to find the part number for the logic board one of my MBPs.  I, unfortunately, have the Mid-2010 15" MBP with the bad GPU that results in endless kernel panics.  (I also had the first Pentium chip, the pentium 60 with the floating point error in 1995 too).  I upgraded the MBP to the 2.8 GHz, core i7 (2 core) processor when I ordered it in 2010.
    Anyway, the apple tech guide exploded view does not show the part number for the 2.8 GHz.  It only shows the part numbers for the other 3 configurations - 2.4, 2.53 and 2.66.  I took the cover and discovered my my EEE code is "QAG".
    I have just started trying to figure this issue out (too much time has passed and Apple will charge me to fix).  I want to try and find a replacement logic board and do it myself.   Does anyone have an idea what my part number is for the logic board?  None of the sites I searched have a 2.8 GHz board listed just 2.66.
    An alternative question - In my PC building days, some motherboards were compatible with multiple speeds of main processors.  My computer model number
    MC373LL/A
    is the same as the 2.66GHz model.  Does the 2.66 GHz logic board support the 2.8 core i7 too?  I don't want to screw up and order the wrong part.
    OSX Yosemite is installed.
    Thanks,
    Tony

    http://www.powerbookmedic.com/MacBook-Pro-15-Unibody-28GHz-Core-i7-Logic-Board-p -36842.html

  • Ibook g4 12.1/1.33 -model M9846LL/A - need hdd ribbon part number!! help!

    Hi,
    Quick question..
    I have an ibook g4 12.1/1.33Mh (model M9846LL/A) that was given to me, it works but but its looking for the system (hard drive) it needs a new hard drive, the problem here is that the old hard drive was taken by the former owner out with the ribbon included and I cant get in tour with him, so I need to get a new ribbon to be able to connect the new hard drive I already have - such thing missin I did not know until I opened the ibook-, I cant find such part number anywhere on the web or where to buy it... can anyone help me on this?, I have taken the hole laptop apart and just waiting for the ribbon.
    The part number for the logic board is 820-1832-A if it matters...
    Thanks
    murillo

    Thanks so much for your reply.... after looking around for a few hours I finally got the part I needed and order, this is the one:
    http://www.macrecycling.com/hard-drive-connector-ibook-g4-1214-p-100234.html
    The last ibook made (12.1/14.1 1..33Mh) was built differently (logic board) and does not use the normal ribbon (like the one you were kind to appoint, this one connect to the other side of the logic board), this logic board does not have other connection for the ribbon, just a straight adapter on the same side where the hdd is located, it just needs an adapter to connect, look at this logic board:
    http://www.macrecycling.com/logic-board-133ghz-ibook-g4-12-p-100237.html
    This one shows the actual logic board and as you can see the connection is made (on the left side of the picture just above the capacitors)...
    Finally I was able to order the part so I should be ok.. thanks so much for your time...
    Have a nice weekend.

  • Web Part is not visible in Web Part gallary

    Hi,
    I have developed a project in sharepoint having two web parts inside it.
    Initially, when there was only one web part in my project it was working fine. But suddenly when i added a new web part, it is not showing me web parts in a gallary. Event it is not available in web part list under Web Designer Gallaries.
    I tried with old .wsp to deployed, but still the same problem.
    On my development machine it is working with two web parts very good. but when i try to deploy that wsp on production site, it is not showing me anything in web part gallary while it was when i was working with one web part only in my project.
    Please, direct me where i am doing wrong, any possibilities?
    I did workarounds as
    1.  Check for the custom webpart feature folder under 14\TEMPLATE\FEATURES ----- Yes it exists there
    2. If the feature Scope is Site
    3. The webpart dll is deployed to GAC with Stsadm command
    4. No web part(My Custom) found here Site Action > Site Settings > Galleries > Web Parts

    in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
    Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
    I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
    As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
    please tell me what could be another workaround. 
     

  • Replacement TC Power Cable part number

    We are moving to the USA and need to get replacement power cables for our Mac equipment. Is there a part number available for the Time Capsule US power cord please?
    Thanks

    I tried this for our Magsafe power supplies for our Macbook Pros. The Apple store said we would have to by the whole Magsafe power supply. I have found the US power cables for the Magsafe PS on eBay. But they are coming from China
    Thanks

  • D20 hard disk drive caddy part number?

    I';m trying to order a couple of replacement hard disk drive caddy for my D20 as one has split at the handle and another looks like it is about to go.
    Does anyone know what the FRU part number is for these?  The part I need is the toolless black plastic carrier for 3.5" hard drives. 
    Thanks very much!
    ThinkStations: D10, D20, and S20
    ThinkCentres: S50, M51, A61e
    ThinkPads: W520, X60T and X61T SXGA+ tablets
    Solved!
    Go to Solution.

    FRU # 41R5630 should get you one or two.   if you still need them, i might have a spare kicking around somewhere.
    http://www.ibm.com/shop/us/maintenanceparts or 800-388-7080 options 2:1:1 (unless the menu hierarchy has changed).
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • How to find hardware part number

    Is there a way to use software ("about this mac") or by looking on the case to see what the part number is for a Power Mac G5? I searched the Apple support site and these discussions and could find no information on locating the part number of a CPU.
    This is needed because there are some issues of compatibility with an audio board and the refer to specific part numbers for different Mac CPUs. Of course, this problem comes about, because unlike most product makers, Apple doesn't label many of their products in a meaningful way - at least since the days of the Performa 650 or Mac IIsi when you could look at the case and know what model you had. Even the silly convention of referring to models as "bronze keyboard", "ATP graphics", "silver doors" or gigabit ethernet" was better than no indication at all.
    So any help would be appreciated if you happen to know. Thanks.
    G5 dual 1.8 .. probably "late 2004"   Mac OS X (10.4.3)  

    Don't know about the part no. of the CPU, but the 'M' no. should be on the original invoice.
    The serial no. will give you the build date
    "The first two characters indicate the city where it was manufactured, the third number is the 200x year, and the fourth and fifth numbers combine to indicate the week of the year.
    So, g8443a19qpp would be made in city "g8", year of manufacture = 2004, week of the year 2004 = 43."
    [from Macintouch]
    Knowing the build date you can see the likely specs. here
    http://www.everymac.com/systems/apple/powermac_g5/index.html

  • MacBook Pro 15.4" 2.16GHz A1150 LCD Manufacturers Part number

    Hi there. Can anyone in the know tell me what the manufacturers part number is for this laptop? I'm aware there are 2 possible, a CHIMEI and a Samsung I think.
    I know it can be found by going to the system prefs>colour but I don't have access to the laptop.
    Many thanks,
    DeBaron

    Low battery life and high temperature immediately suggests to me that some daemon or other background process is probably running at almost 100% CPU utilization in some tightly rolled loop (read "hung").
    Battery life on modern laptops is dependent on how heavily the CPU is being utilized. A single app or daemon running amok like that can eat battery life rather rapidly. And, of course, CPU temperature is also proportional to use, so you can basically think of battery life and operating temperature as inversely proportional.
    To find out what process is misbehaving, run Terminal. Type "top -o cpu" and press return. See if there's some process running at 99% or whatever, then get back to us.
    You might try installing the combo update. If the problem is caused by a installer glitch, that should fix it right up. If it's a bug, obviously that won't help. I couldn't begin to guess which it is.

Maybe you are looking for

  • How to access same iPhoto library from MacBook and iPad without making a copy (sync option)

    I have a simple question to you guys (tried to sort it out with Apple tech support but no luck there!) How can I set up iPhoto in a way that I can have access to the same files from iPhoto on MacBook and from iPhoto app on iPad? I do not wish to sync

  • Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5

    Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5? I am having a weird problem, where if I view a video I have uploaded and change the volume, I used the on-screen slider and It changed the volume but it also popped up like I

  • How to determine color book used in customer-supplied PS file?

    Using CS5. I am unable to open two files supplied by our client. These two files pre-date CS6, and were made by a branch of our client in Germany. We are in North America. There are many layers of bureaucracy between us and the actual creators in Ger

  • For A_S_I

    You obviously need Duke dollars more than I do, so reply here and I'll give you a pile of them so you can maybe stop your Duke-teasing by ante-ing up dukes and retracting them after being answered.

  • File finder with hiperlink to the file.

    Hi, i try to do  a file finder, i write the name of the file when a find the file i want to make a click and open the file, (pdf file, or tdm file.) please i need your help. i,m very novice in this lenguage Thanks