Charger power cord broken after replacement lastest 1 day vendor university of SAskatchewan bookstore refused to replace the dam cord Thats two chords @ 98.00 $ I have used my fathers and sisters chords which have no faults why is it that a defective cord

Power chord lasted 1 day after another replacement. When 2 other power chords are borrowed in this household no problems. Vendor sold the last one that lasted 1 day( 2 i phones 3 mac pros and 5 i pods in one household not enough?) The power cord that was purchased at the University of Saskatchewan Bookstore lasted 1 day and they say it malfunctioned by user. The chord is brittle and frayed. All products bought in this household from same vendor. Apple you have some products that are poorly made admit it look at feedback pages. Is gouging a University Student for 98.00$  for faulty cords the corporate objective or standing behind your products after sale a respondsibility of seller? Keep producing a good product with faulty accessories and you will continue to do well unless you value your entire product line. What are you willing to do?

Your statement of displeasure on this forum is being directed at other Apple users like yourself.  If you want your feelings known by the Apple corporation, you should communicate with them by sending a letter to Cupertino or perhaps registering your complaint with an Apple store manager.  You may get sympathy here but no results.
Ciao.

Similar Messages

  • Anybody have problems restoring Iphone 4 for verizon after replacing the LCD

    anybody have problems restoring Iphone 4 for verizon after replacing the LCD

    i didnt replace the screen on my verizon iphone, but i have had several problems in the past with restoring, however they are always easily solved for me by plugging into another computer and restoring from there once its restored off that computer you can then plug back into your computer and put your info back on.
    also remember to copy the ipsw from your iphone software updates folder onto a flash drive and onto the computer you are using to update to save yourself form downloading the ipsw on that computer (if it is not already on that computer). then just do an option restore by holding option key when you hit restore and select the ipsw you want to restore to.
    hope this helps

  • My hp 7160 wants to print in black only after replacing the yellow cartridge. Any suggestions?

    My hp 7160 wants to print in black only after replacing the yellow cartridge. Ink level shows full amount. Test page prints fine.
    I have tried different programs to color print in, all return the same error message.

    Hi @obxgirl,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Compaq presario cq56 black screen on boot up after replacing the fan and keyboard

    Hi the cpu fan on my computer died, so we replaced it and i took the opertunity to replace the keyboard at the same time.
    Now the fan works just fine the blue/white power button works, initially the caps lock button came on and stayed on but no longer comes on at all.
    I am quite the novice in all things computer so think i may have done something stupid, and fried the motherboard, but if anyone could come up with something for me to try before i have to go through replacing that bit i would appreciate it.
    Oh i have tried an external monitor and it says recieving no signal on the screen.
    Thanks for helping

    Hi @carriebevan
    Welcome to the HP Community! I saw your post regarding the problem with the notebook going to a black screen after replacing the fan and the keyboard. To be honest with you there isn't a whole lot that I can do for you in this manner. Try seeing if you can get into the operating system using Safe Mode. If you can then we can look at a couple of things.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • After replace the ATX case for K7T Turbo2 mainboard???

    hi, Master outhere help plz...
    after replace the ATX case for K7T Turbo2 mainboard??? why not boot up on screen any more , but power running is ok for the CPU fan , if i forgot any thing from this stage plz guide me the step.
    thank for kindly supports soon...

    psu max amps better than in old case ?
    got to many stand offs under the board shorting it out ?

  • High temperatur​e after replacing the CPU T2500 - T7200 in T60

    After replacing the CPU from T2500 to T7200 CPU temperature ranges from 70-85C. It seems to me high, I think about replacing thermal grease or thermal paste application. What's better? Do away with the original gray ribbon and attach a new heatsink or better smear toothpaste?
    Solved!
    Go to Solution.

    orion9727 wrote:
    there was a test done and toothpaste came out close to most themal paste.
    artic 5 should never be used in a laptop.
    it silver and thats a no no on mobile cpu.
    use a non conductive one or a thermal pad.
    the gray ribbon is a themal pad best to use WHAT CAME IN IT.
    reason is that can be a shim and do away with that and no contact.
    you went from a 31 watt to a 34 watt TDP not alot but it gonna run hot.
    75-80 c is hot yea but you have 65nm cpu class thats gonna run hot because it old and getting a lot of work.
    so you all know toothpaste might been used in tests but i not use because it can dry out and you dont know whats in in exacly.
    thermal wise i do belive whats in toothpaste is very good thermal wise but stick with the gray ribbon.
    Please disregard the above post(er).
    I've used AS5 on thousands of ThinkPads with no ill effects, actually the exact opposite. Minimal research of experiences posted by other owners on Bill Morrow's ThinkPad Forum will confirm this statement as well. Arctic Silver is as good as it gets unless one wants to spend $50 for a tube of thermal paste.
    To OP, your machine is running way too hot for the CPU in question. My 15" T60p with T7600 idles under 50 degrees C, and doesn't go over 62 in normal use. And yes, it has AS5 in it.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Macbook is out of power and will not charge. Charger is fine as is working on fathers and sisters MacBooks - what should I do?

    Macbook is out of power and will not charge. Charger is fine as is working on fathers and sisters MacBooks - what should I do?

    Does the connecter seem to be making good contact?  Is yours a model with a replaceable batttery or not?
    Might have to visit an Apple Retail store genius bar, or authorized repair and have them check out the battery to see if it has failed.

  • Cooling fans constantly run @ full speed after replacing the upper CPU??

    After replacing the upper CPU on a Power Mac G5 (June 2004), Dual 1.8Ghz PowerPC, model M9454LL/A, all the cooling fans constantly run at full speed. All other operations are normal.
    I've read, "...after replacing or switching CPU locations the Logic Board doesn't properly recognize the CPU's in their new location and a "Thermal Calibration" is needed". Could a "Thermal Calibration" possibly correct the constant full fan speed issue?
    What software would be required?

    Hi-
    Could a "Thermal Calibration" possibly correct the constant full fan speed issue?
    Yes.
    What software would be required?
    The Apple Service Diagnostic disc (ASD) of the proper version for your machine.
    Call an authorized Apple service provider and arrange a calibration, as the disc is not readily available to individuals.

  • After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and itunes, it seems that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior..

    After replacing the hard drive on my G4 Powerbook and reinstalling Tiger I am no longer able to synch between itunes and my ipod (Classic 160gb) it would seem that the software on the ipod is of later date than itunes and I am unable to update itunes to the state prior to the original harddrive's failure for Tiger OSX 10.4.11
    Any ideas on the subject would be most helpful
    Thanks in advance
    Dingoh

    The last security update released for Tiger users was the 2009-005 update. The latest version of QuickTime is 7.6.4. The last version of iTunes that can run on Tiger is 9.2.1, because 10.0 only supports Mac OS X Leopard and later.
    So, are you on version 9.2.1?
    Was it Tiger or Leopard you had on the drive before?
    iTunes 9.2.1 download...
    http://support.apple.com/kb/DL1056

  • Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?

    Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?

    Hi Drazse,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not recognized by iTunes for Windows, the troubleshooting steps in this article may help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jeremy

  • MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

    MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • TS1538 My iTunes, after a short time, decides not to be able to recognize my devices, the only thing that fixes it is a re-install of itunes. it is getting irritating as this will be the 7th time i have had to do it. Any solutions?

    My iTunes, after a short time, decides not to be able to recognize my devices, the only thing that fixes it is a re-install of itunes. it is getting irritating as this will be the 7th time i have had to do it. Any solutions?

    The info that was on the old iPhone can only be retreived either by restoring from iCloud/iTunes back up or syncing from iCloud. You need to chek these places and if nothing is there then I'm sorry that data is gone and you will only have the back ups you see.
    But check iTunes back ups:
    Windows
    Edit>Preferences>devices
    Mac
    iTunes>Preferences>devices

  • How can I make my wireless keyboard "discoverable" after replacing the batteries?

    How can I make my wireless keyboard "discoverable" after replacing the batteries? Bluetooth keyboard setup said my  "keyboard is not connected" when I turned it on today.....assuming the problem was batteries, I replaced them.

    I've got it working now.....

  • HT201401 s4 iPhone after replacing the screen (no service - Contact sim-No connection wi-fi)

    s4 iPhone after replacing the screen (no service - Contact sim-No connection wi-fi) and the device was running before the replacement.
    What is the solution?
    Note I'm not good at speaking in English directly, but used an interpreter because
    I need run two

    2-
    And sure that the card is working properly and also there is a Wi-Fi network

  • I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

    I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column,  find the 10 lowest numbers, then get the average and after that multiply it by .96  I used to use Excel and the formula worked fine in that. Here is my Formula
    =(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
    This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
    The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96  So instead of using 1 cell, I'm using 12 cells to get my answer.
    This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
    Hoping I explain myself well enough and that someone can help me.
    Thanks

    You can still do it in one cell but it will be more unruly than the Excel array formula.
    =average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
    where you would, of course, replace the "..." with the remaining six SMALL functions.

Maybe you are looking for

  • How to uninstall Adobe Drive 4 for CS6 for Mac

    I have Adobe CC on my system and also Adobe Drive 4.2 from CS6 time for some reason. adobe Drive was not removed when I removed CS6. The Adobe Drive 4.2 run fine at this time. Now I want to uninstall Adobe Drive 4 from my Mac (running OSX 10.8.4), so

  • Handling exception in BULK COLLECT

    Hi Experts, For the following procedure if I send the existed employee number of emp table as input the procedure is executing successfully. But if I send the employee number as input which does not exist in the emp table the exection block does not

  • Comments in cells not good in Numbers 3.0

    I have spreadsheets. Obviously with figures in different cells. Prior to this upgrade, I have several cells that have comments entered into them. Specifically the cell would contain a total dollar figure. The comment would contain the invoices that m

  • ITunes thinks my new iTouch is my old iPod

    I received a new iTouch and when I first connected it to iTunes I accidentally didn't rename it. So now iTunes thinks my new iTouch is my old iPod. So when I started syncing it, it looks as though my new 64gb iTouch only has 32gb. How do I make iTune

  • Material Valuation History Details

    Hi All, I have a query on Material Valuation history table. In the present scenario, a Material master is created in the year 1955 & lot of Material Movements has happened for this material from 1995 to till date. But if I drill down for the history