Charger that came with Ipad gets hot and only charges for a short time or not at all

charger that came with Ipad gets hot and only charges for a short time or not at all

Stop using it and Return it to the Place of Purchase and get it checked... ASAP...

Similar Messages

  • Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

    Just updated from elements 11 to 13. When I try to use Levels in Elements 13. I click on the slider with my bamboo pen and nothing happens for a few seconds, sometimes not at all. This worked fine in Elements 11.

    Never mind my question on the photoshop elements 13 trying to install the camera raw update. It has been taken care of thank goodness!

  • HT4060 Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?

    Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?  Or do I need to purchase one of those cigarette lighter charging devices?  Thanks!

    You'd have to read your car manual but chances are it won't put out enough power for the iPad. The car is likely set up to charge a phone, most of which typically want half the power an iPad wants.
    I think your  options are to get a cigarette lighter looking charger, making sure it's powerful enough for an iPad...or you can get power inverters for about $25, where they plug into the cigarette lighter/power point and have a normal household type outlet on the other end. Then you'd just plug your charger  in like you would at home.
    Another option would be to look for something like a Zagg Sparq, which is a battery operated charger...plug the Sparq into the outlet at home. Its battery holds a charge and you can use that to charge your device. (zagg isn't the only manufacturer of such a device, Targus has one as well). Just look for portable chargers.
    The key to remember is to make sure it's rated for an iPad, which will want more power than a cell phone.

  • My iphone 5s isn't turning on and its not charging. i have my legit charger that came with my phone and after 6 months it stopped working, i even have a charging case and that wont charge i. I tried cleaning it but still nothing! some please help

    A few days after i've updated to iOS 8.1.1 my iphone 5s died and isn't turning on and its not charging. i have my legit charger that came with my phone and after 6 months it stopped working, i even have a charging case and that wont charge it. I google searched the problem and tried cleaning the charging port but still nothing! some please help

    Please make a Genius Appointment and take it in for service.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?

    Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?  I think I can, but I'm too chicken to try. Thank you ahead of time,
    Mark

    Thanks for the quick reply.

  • HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

    Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
    Maps took me to the completely wrong side of town for a long standing business in town.

    Hello margmcarlson,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
    Best of luck,
    Mario

  • My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

    My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

    Try cleaning out the phone's port, of pocket fluff and such. Carefully. And check the mains adapter similarly, but less likely.

  • Ipad gets hot and then touch don't work..

    ipad gets hot and then touch don't work..

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Can I unload iso 6?The iso 6 0 has messed up my iPad. Can I go back to the iso that came with iPad 2

    The iso 6 0 has messed up my iPad. Can I go back to the iso that came with iPad 11

    Sorry, but you can't go back to a lower iOS.
     Cheers, Tom

  • Macbook won't take charge from the charger it came with.  But WILL take a charge from older generation chargers.

    My Macbook will only charge from an older model charger.  The charger that came with the laptop, after the computer overheated dramatically, is suddenly not working.  The weird thing is, the Apple store tried several chargers out just now, including a brand new one, and what we discovered is that the older model chargers work fine, but the newer model chargers (which used to work perfectly) are indeed recognized by the Macbook (there is a little plug/'charging' symbol in the top right) but there is also a message next to the symbol, in parenthesis, stating that the Macbook is "Not Charging".  Any idea what this could mean?  The Apple store said the computer passed all of their rigorous tests... but obviously something is wrong... so they gave me two options: they could either replace the Magsafe unit ($50), or they could send the computer to the "Depot" to have any parts that are malfunctioning changed at one flat fee ($280).  What do I do?  Because I don't want to pay $280 for a new Magsafe unit when I can get it for $50.  But if this is a logic board problem, then obviously I should send it in to the Depot-- but what if they run more tests and decide the logic board is fine?  Any advice would be greatly appreciated.  Thanks.

    my ginger,
    I did the shift-control-option + power SMU reset.  (My Macbook has an internal battery so I couldn't remove it.)  Nothing changed as a result of that though. 
    I checked to see if the battery and adapter are being recognized.  This is what it said (cut-and-pasted below).  Let me know what you think. 
    I wonder if the wattage difference in the adapters is what is making the difference... And if so, what that might mean in terms of damage done.  Hmmm. 
    Thanks again for your help.  Much appreciated.
    Battery Information:
      Model Information:
      Serial Number:          W0952KWJU9X7A
      Manufacturer:          SMP
      Device name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0103
      Hardware Revision:          000a
      Cell Revision:          0130
      Charge Information:
      Charge remaining (mAh):          3760
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          4684
      Health Information:
      Cycle count:          442
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          126
      Voltage (mV):          12054
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          0
      Display Sleep Timer (Minutes):          10
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          0
      Display Sleep Timer (Minutes):          2
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0000
      Wattage (W):          0
      Revision:          0x0000
      Family:          0x0000
      Serial Number:          0x00000000
      Charging:          No

  • My iPod shuffle, which I prchased in 2009 only worked for a short time so I put it back in the box and just recently took it out. I will not charge and the power light does not come on. It was faulty from the start and thought I was out the money I paid.

    My iPod shuffle only worked for a short time. It will not charge  and the power light does not come on. Bought it in 2009. Put it back in the box and in my desk. Recently tried to get it to work again but no luck. Anyone else have this problem? Very disappointed with the product although my wifes work perfectly.

    Can't say I haven't done the same kind of thing...keep finding things I had every intention of...
    If you have the chance stop by an Apple Retail store and talk to them about it...they often work deals for replacement of out of warranty non-working items for prices around half price.  Won't hurt to stop by and see what they will do for you.

  • I just get my new I pophone 4s and the icon for the face time is not showing in the screen

    I just get my new I pophone 4s and the icon for the face time is not showing in the screen

    There is no separate icon for FaceTime. You access it through contacts. Go into the contact you want to call and tap the FaceTime button.

  • I have had my ipad for 6 months. We had a power failure and ever since my ipad will not charge with the wall adapter that came with it.  It will SLOWLY charge when plugged into computer port. Can anyone help me resolve this?

    I have had my iPad for 6 months.  We recently had a power outage and my iPad was plugged in with the adapter that came with it.  Since then I can not charge iPad with adapter, however I can charge it SLOWLY on my computer.  Do you think the adapter got fried?  Also do you HAVE to have iTunes with an iPad, they were charging me alot of fees for games I did not download NOR give my password to have them downloaded so I cancelled iTunes because fo too many fees. Could this have anyting to do with the battery not charging?

    Since then I can not charge iPad with adapter, however I can charge it SLOWLY on my computer. 
    Well, something's definitely wrong if it won't charge from a wall outlet. Make an appointment at a Genius Bar or take it to an Apple certified repair provider.
    As for iTunes charges, according to Apple  iTunes Store: All Sales Are Final
    You can try contacting iTunes Billing:
    http://www.apple.com/support/itunes/
    Click: iTunes Store Account & Billing / Billing Inquiries / Email Us

  • Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

    Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

    I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
    If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport"  it replies it cannot locate it)
    I suppose everything will be fine when you'll be out of censorship....
    Perhaps iOS  Apple Maps are absolutely useless for expatriate in China.
    Use Google Maps instead
    BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

Maybe you are looking for

  • Cannot use webcam on my Satellite A300

    Hi there I have installed Windows 7 home premium in my laptop (it had windows Vista) and ever since I can't use my webcam. It doesn't appear in device manager and I have install and uninstall many times the drivers but every time I see the message th

  • Importing Photoshop picture files to IMovie6= PINK TINTED PICTURES?

    Most of my old pictures were (scanned) imported from PhotoShop Elements3 as Photoshop Files. After importing they change to "pink-tint". I also know if I "save as" the files to JPEG format they're ok. I've only noticed this since IMovie6. I can't bel

  • Setting Oracle date in Unix

    Lately I have made a change in the date/time by modifying the timezone. I rebooted the Unix Server and the date is now as I want. However I have noticed that Oracle Enterprise Manager (10g) is still displaying time with the old timezone. Do I need to

  • Thumbnail pictures cannot be opened, black exclamation mark appears

    Numerous photos cannot be opened any more, when I click on the little previews I see only a black surface with an exclamation mark. How can I fix this problem ?

  • WLC Guest Tunnel

    Hi, I've some questions about Guest Tunneling, since the docs on CCO is not so complete. Right now I've 2WLC4400 Series in a redundant way with 2 WLANs, 1WLAN per AP Group. All the APs are setup as H-REAP node. We've to setup a WLC in DMZ so that Gue