Charges fine but can't be seen in updater after pc reformat

Hi all,
I'm having a few issues with my ipod mini 4gb, when i hook it up to the pc it charges fine, icon shows and all that, but it remains unseen to the ipod updater softwaes, itunes and all of windows.
I've had a look through previous topics, it resets fine showing the apple icon, but won't go into drive mode when i press the Select and Play,Pause buttons imediatley after.
To heap on the issues i'va also lost my CD as well
If anyones got any suggestions or has seen this before any help would be greatly appreciated.
Cheers, Dr.Ross

I could deal with the problem inserting the flash object in
XML as said in another post, like below:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="500" height="375" id="FLVPlayer">
<param name="movie"
value="MPG/AmericanCreek/FLVPlayer_Progressive.swf" />
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="scale" value="noscale" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=MPG/AmCreek/Clear_Skin_3&streamName=/MPG/AmCreek/A mCreek&autoPlay=true&autoRewind=true"
/>
<embed src="MPG/AmericanCreek/FLVPlayer_Progressive.swf"
flashvars="&MM_ComponentVersion=1&skinName=MPG/AmCreek/Clear_Skin_3&streamName=/MPG/AmCre ek/AmCreek&autoPlay=true&autoRewind=true"
quality="high" scale="noscale" width="500" height="375"
name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
It's working fine but flash is invisible in IE 7, I could
read something old about problems and bugs, does anybody knows how
can I solve that problem.
You can see a test page here
http://www.stefanoreboli.com/test/index.html
Thanks

Similar Messages

Spry loads SWF fine but CAN'T be seen in IE

Looked for a solution but coudn't find any in previous posts.
The problem is quite simple but not the answer as I can't get
it to work.
I want to load an SWF in a detail region from a Spry Table,
exactly the same as when you load an image.
Went through the simplest way by adding an SWF and linking to
my {swf} in my XML. As read in another post I opened and closed the
dreamweaver window not to see error text. The page in browser will
disappear as it opens.
Please is there any solution to easily display SWF with spry
(I'm going mad on this)?
Thak you all

I could deal with the problem inserting the flash object in
XML as said in another post, like below:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="500" height="375" id="FLVPlayer">
<param name="movie"
value="MPG/AmericanCreek/FLVPlayer_Progressive.swf" />
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="scale" value="noscale" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=MPG/AmCreek/Clear_Skin_3&streamName=/MPG/AmCreek/A mCreek&autoPlay=true&autoRewind=true"
/>
<embed src="MPG/AmericanCreek/FLVPlayer_Progressive.swf"
flashvars="&MM_ComponentVersion=1&skinName=MPG/AmCreek/Clear_Skin_3&streamName=/MPG/AmCre ek/AmCreek&autoPlay=true&autoRewind=true"
quality="high" scale="noscale" width="500" height="375"
name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
It's working fine but flash is invisible in IE 7, I could
read something old about problems and bugs, does anybody knows how
can I solve that problem.
You can see a test page here
http://www.stefanoreboli.com/test/index.html
Thanks

How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

Try calling 1-800-676-2775. Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk). *May* is only because they may not burn disks for Leopard anymore.
If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
Have you considered Snow Leopard?. Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

I am trying to import my cd's onto itunes on a new macbook pro. i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"

i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"
thank you

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

I have a iPad first gen but can't doe a software update off my computer can I do it wirelessly and unlike my other apple products in settings there is no software update botton

I have a iPad first gen but can't doe a software update off my computer can I do it wirelessly and unlike my other apple products in settings there is no software update botton

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Exchange I can recieve messages, but can not send, reply, or update calendar from Pre.

Exchange I can recieve messages, but can not send, reply, or update calendar from Pre.
This worked on Version 1.0 but does not work on 1.3. Is there anyway to go back to ver. 1.0
Post relates to: Pre p100eww (Sprint)

Text messages as in SMS/MMS, or iMessages?
If the former, contact your carrier.

HI my network connections is working fine but it doesnt allow me to update software or access apple store. Any suggestions?

HI my network connections is working fine but it doesnt allow me to update software or access apple store. Any suggestions?

Then it simply was NOT Brand New. Doesn't matter what the box looked like when you got it or if you went through the setup pages when you first turned it on. If it is registered to some other Apple ID then someone else had originally registered it and locked it to there ID.
Type in the serial number of the system into this page.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
And see when it was originally registered.
Then send it back to Amazon as Used.
LordRavenWolfe wrote:
So I bought a brand new macbook from Amazon, and it came factory sealed (Not my first time buying a macbook, last one I bought was from Apple directly) but after I got this, I put in my apple I.D. and it told me there were updates available. I told it to go ahead and update, and it updated about half of the list, but the essential stuff (pages, notes, etc) it says "This software was installed using another Apple I.D. Please logon with that I.D. to install the software." I'm a bit baffled by this as it is a brand new mac and so I don't know why anyone else's I.D. would be logged into this mac. I'm not really worried about it though, as I don't really need to update my pages, etc, as I like what I have, but I'd love for this stupid "updates availble" popup to stop popping up every freaking day!!!
Anyone have any suggestions on finding out how to either gain access to update, or get rid of that "other" i.d. that is somehow associated with my brand new macbook?
I'm running OSX 10.9 if that is of any consequence.

Can't see the Siri update after upgrading to iOS6 on the new iPad 16 gb wifi only

As said that Siri update would be coming to the new iPad .... I have upgraded the os but can't find the Siri update .. Any help would be appreciated . Thanks

There is no icon.
Siri is accessed by holding the home button down.

Airport Express has green light but can't be seen in airport express

I had something odd happen with my wifi network today. I have reset everything and gotten all my Airport Expresses (AE) working again except one. This AE can not be seen in the Airport Utility (AU) no matter what I do. I have brought it into the same room as the transmitter and it would still not be seen. So I connected it to an ethernet cable and when I did the light turned green but still nothing in the AU. Each time I have changed configurations I have attempted to let the AE attempt to start on its own, I have performed a soft, hard reset and then a factory reset.
This is an older device (b/g not n as I recall) - what am I missing? It is difficult to determine if the device actually resets but the light blinking seems to match with descriptions of the process on the web. This all worked yesterday and this morning until my network went haywire (only the 2.4 GHz signal went out, I changed channels and reset and it has stayed up since). All the othe Airport devices could be reconnected by a hard reset after which they appeared in the AU and I could then reconfigure. This one AE just will not cooperate.
Any thoughts will be appreciated.

The model number is A1084 and I am using version 7.6.1 of AU.
When I attempted the hard reset the list starts off amber then after 5-10 seconds the amber light flashes rapidly and that is when I remove the paper clip I am using to push the button. Afterwards it goes solid amber for a bit then flashes amber. If the devices is not plugged into the ethernet it stays flashing amber, it it is connected to the ethernet it goes steady green
When I attempted the factory reset it is solid yellow for quite awhile then I get a rapid flashing green light at which time I remove the paper clip. It then goes back to amber for awhile then flashes amber. If the devices is not plugged into the ethernet it stays flashing amber, it it is connected to the ethernet it goes steady green.
In neither case does it appear in AU. Also FYI I am running Mountain Lion although everything has worked fine until yesterday.
Thanks for the reply

Receiving mail fine, but can't send mail

For some reason, my outgoing mail servers are all showing offline. I can receive mail fine. I have my own domain names, and they are all housed on the same host. My boss has one of the same domains and he can send and receive mail fine. I can receive mail, but can't send mail out unless I use my gmail server to send. All my other domains are showing offline on the outgoing. How do I get them back online, and is this a Macmail problem (my boss uses Entourage), or is it a problem with my Qwest DSL? I don't know where to start.
I did call the place where our domains are hosted and all is OK there.
Thanks,
Carole

Problem - Cannot send eMail - pop up box says smtp server needs password - if password used this is not recognised.
Solution - Go to Mail>preferences choose Accounts, select one of the accounts.
Look at 'outgoing mail' server, shows ' smtp.(name of server.com) (offline)' then click on it and choose 'edit smtp server list' - the box will show description - '(name of server)', server name - 'smtpmail.(server name.com)' and in use by account - '(account name)'
press the '-' button and the above details will disappear.
Press '+' button and type in 'smtpmail.(server name).com' in the server name box - if you are prompted to save changes, click 'OK' - this may only happen when changing the first account ..
All should now be OK and you can now check if eMail can be sent..
Open an 'unsent eMail' in the Outbox by double clicking on it and clicking 'send' it should be sent.
Wilbertross

WIFI is working fine but can't download or update software. Way too slow...

Please help. I have called Optus and my line is fine but the download is so slow stating 50 hours at time.
I can't even do a software update.

What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try Ethernet

Want to update my StarOffice 9 version but can't get access to update 9.1

Hi,
I bought StarOffice in 2009 and want to update it to version 9.2. This is a public accessable download however I need to first install version 9.1 and strange enough it sends me to a support page where I have to input an Service ID. I'm running around in circles now. I purchased an official product, can update to a public 9.2 version but have to download 9.1 first and that is behind bars. It is driving me nuts. I looked how contact Oracle but can't find anything and are confronted with YES AGAIN a Service ID. The only option is to write a letter to Oracle headquarters to overcome this problem.
Does anybody knows a better solution for my problem than writing a letter ;-).
Kind regards,
Marcel
Edited by: user13486280 on 15-dec-2010 13:44

PGAGA wrote:
Monday, December 20, 2010
There is no such information on our CD but we had an account on https://sunsolve.sun.com/ and got updates from it. But now access to this website is redirected to https://support.oracle.com where we need an Customer Support Identifier to get updates.
If you properly migrated your identity to oracle, then you should still be able to access the updates at this site
https://sspatch.oracle.com/showMe.do?page=public
That I did, but I didn't know about this URL. Now we can download patches (but with some difficulties — descriptions of patches are missing).
If you did not create the Oracle account with the same email address as you used for Sun, you will need to contact Oracle to reestablish your identity.
Q: Is there any way to get updates (or get OOO installer) without the mysterious CSI?Updates will require you reestablishing your identity.
For OOO you will need to purchase a new license.
I understood that:
1. "StarOffice 8" owners has possibility of update to "StarOffice 9" without any additional payment.
2. But "StarOffice 8" owners has no possibility of update to OOO without buying it. (from OOO3 Patch readme: +"You may only use this product with an already existing license to StarOffice 9 or Oracle Open Office 3.2.1."+ ).
But my situation is more complicated:
Our software provider sold the "StarOffice 8" to us on 26 ^th^ March 2009 when "StarOffice 9" was existing more than half of year. The fact of the sale is properly committed in our official papers.
Q.: Can my company use OOO taking into account the above information?
OOo gives no any guarantee to properly work comparably with OOO.With the exception of Oracle Cloud Office support, OOo is compatible since that is the code underlying OOO.
PhilThanks for you reply!

IPod charges fine, but uses it's batteries even when it's off??

Okay, this happened recently. My iPod charges up fine, connects to my computer fine, everything. However, I have a feeling that it's using up it's batteries even when it's turned off. For instance, I charged it up to it's max battery level last night, and when I woke up this morning, turning on my iPod showed the no-battery indicator. Anyone know what's up? My iPod also gets really hot, too.

I think its the battery itself, its just loosing charge and/or not holding it anymore, that can happen after a year or so of lots of use because the same exact thing is happening to mine right now, execpt for the getting hot part idk what that is about, but yeah mine will die over night on a full charge and only last maybe a hour when in use after a full charge it ***** and its gay because apple ends the warrenty after 1 year and thats usally when it starts happening.

I can't run swf files in dreamweaver cs6, they place in the page fine, but can't be viewed.

I've created an animation .swf file in Flash and inserted it on a new webpage. When I go to view it in live mode, it's blank. When I view it in the IE browser I keep getting a message that I need a newer version of Adobe Flash player, which is not the case, and even going through the install process doesn't help. When uploaded, it doesn't appear on the webpage. This is Dreamweaver in the CS6 release on a Windows 7 64 bit system. The animation file runs fine when viewed from the original folder, but does not funciton (blank screen) when opened from the copied file Dreamweaver puts in the site folder. Can anyone offer any suggestions? Also, is there a way to loop a .flv file? This could be a work-around if I can't resolve the .swf issue.
Thank you in advance for any help you can offer.
Mark

Hi Jon,
Unfortunately not. The website is actually an HTML module logded in a third party program. Even in the development stage though I can't see the .swf file in either the live mode or by viewing with IE. Flash video files play fine as have the other graphics I've incorporated. It seems like a file is missing to make the .swf animation work properly. When I copied the file over from the original folder, Dreamweaver also placed "expressInstall.swf " and "swfobject_modified.js" in a scripts folder. I'm wondering if there should be another or different file to make this work.
Mark

Cisco Any Connect: Works fine but can't download file

Hello! Here's my question:
I search for documents in a database over a remote vpn using Cisco Any Connect. Works fine. I receive a result, a list of documents that meet my criteria. I can either export to my PC or open. If I try to export, I get a prompt asking where I would like to place the file. I select the place (my desktop) and the window hangs after about 10% on the progress bar. If I try to open the document, a window opens but hangs.
Is there any way to resolve this, is the problem on my end of the remote vpn? Is this an Any Connect issue?
FYI: I am using IE8. I am using a Microsoft Windows Essentials firewall. (I was using Norton before this, same issue.) I have also tried “Display All Websites in Compability View” option in IE but no difference. The tool I am using is Documentum.
Thanks,
Mike

One thing you should do is get rid of that Westell modem from verizon. Its junk. I replaced it with a DLink DSL modem and internet is faster. Not that this suggestion solves your problem.

Charges fine but can't be seen in updater after pc reformat

Similar Messages

Maybe you are looking for