Charging and outputting from i pad at the same time

I am using I pad Air to connect to Garmin heads up display for navigation. However when it outputs the data to the heads up display it does not charge. Is there a solution for this

Hmm. It looks like Garmin expected the HUD to be used with an iPhone, not a power-hungry iPad Air. The Garmin HUD comes with a passthrough USB 2.1A charger rated at 5V. The iPad Air requires 12V.
If you were not running anything on the iPad, you might get a trickle charge on an Air with a 5V charger - really, very little charge at all if any. But navigation is pretty intensive. You will not be able to charge with that. If you have a second cigareet lighter adapter in your vehicle, you can get an auto charger designed specifically for the iPad Air. Or consider an external batter pack - again made specifically for the iPad Air.

Similar Messages

Can you charge and play shuffle (2nd gen) at the same time?!

we purchased a shuffle to run our 'on hold' music at work, and its a pain in the arse to remember to charge it every night. im so used to my iPod video that lets me charge and play at the same time...
any suggestions?!

Hi Jen,
I have the USB Power Adapter plugged into a power
outlet and the shuffle plugged into the adapter. I'm
running a headphone to RCA cable to an audio
receiver's inputs. This allows me to listen to all my
songs on the Shuffle without needing to have a
computer near by. I've been using this set up since I
bought the Shuffle. I have to mention that the
Shuffle I own is 1st Gen...
Again, hope this helps.
With all due respect, Rick, Jen (the original poster) was asking about how to charge+play a SECOND GENERATION Shuffle...you might note that fact is even included in the Subject field...
But now that you've mentioned yours is a 1st Gen Shuffle... 1st Gen Shuffles ARE available from the online Apple Store as refurbished for $49. Perhaps she should think about getting one of those?

AirPlay Mirroring and Output via Digital Adapter at the same time

Hello,
Is it possible to use AirPlay Mirroring to an apple tv and the digital Adapter at the same time?
We want to get the Screen on a beamer and a tv at the same moment.
If this isn't possible are there any chances to get AirPlay mirroring working on two Apple TVs at the same time?
We are using the newest iPad Air
Greets

Unfortunately not. One output is supported at a time. But perhaps you can use some sort of an HDMI signal splitter? I've not tried it, and perhaps it won't work at all, but you might try outputing directly to a splitter that then can be connected to both a TV and beamer.

How to open and save pictures from 1 folder at the same time?

Is there a way to open and save pictures from 1 folder at the same time?
I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
greetings!

Hi Kway,
Here you are. I wrote a file a customer times ago & It did what you want!
Just see the attachements and keep me inform.
Regards,
Julien Roland - District Sales Manager
NI Belgium - Technical Support
Don't forget to rate a good answer
Attachments:
Test existing Files.vi ‏23 KB
Delete files from array of files (SubVI).vi ‏16 KB

If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?

If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?
for instance Keynote?

Welcome to the Apple community.
The Apple TV cannot display keynote presentations or websites from the computer. It can display them via mirroring from the iPad 2 or better or the iPhone 4S.
You cannot AirPlay to 2 Apple TV 2's at the same time from an iOS device. You can watch the same video, TV show or listen to the same music from your iTunes library on multiple Apple TV's at the same time.

Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
GB

It is possible to charge an iPad3 over USB and transmit data over USB at the same time?

Hello,
it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
If yes, how?
Thanks
Best regards

OK!?
That is right that the USB data oins are not connected to +5V pin.
But i found a description for a self built power supply for iPad.
http://timothyb.net/DIY_iPad_2_USB_Charger.html
and
https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
The description say: data pin D- need a voltage level of 2V and D+ 2,857V
when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
The voltage "D+/D- coding" is the key for the iPad to charge.
OK now back to my problem.
The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
Is that correct?

How do I remove the application from your iPad at the same time and with the clouds?

Hello,
how can I remove the application from your iPad at the same time and with the clouds?
I know you press the app icon until it starts shaking, then press the black cross in the upper left corner. This will remove it.
But still I will come in to the store as a bookmark Purchated I see it with the symbol of a cloud. And I would like to remove it for good. Under iOS 5.1.1 somehow I managed to do that (at least hide it). In iOS 6 I can not do that.
I greet

The only transition you can add this way is default cross dissolve. If the images are in the timeline, move the playhead to the beginning of the images, select them all, and drag from the timeline to the canvas to overwrite with transition.

Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time. She wants I.O.S. 8 removed. How do I remove it from both devices? I am willing to resort to my old IOS7.1.2.

Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time. She wants I.O.S. 8 removed. How do I remove it from both devices? I am willing to resort to my old IOS7.1.2.

Sorry...downgrading is not supported.

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time.

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

How do I view multiple images from different projects at the same time?

Hello
I've been trying to find the answer in the user manual, but no luck so far.
I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
Thank you
Elizabeth

Thank you again Tony
I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
Elizabeth

Clipping an image from various places at the same time

Hi,
I am trying to clip an image from various places at the same time. Is it possible to do it?
Right now I am in this phase:
g2D.clipRect(x, y, screen.getWidth() - 40, screen.getHeight() - 40);
g2D.drawImage(planet, null, 0, 0);The x and y of the clipRect method I want them to be different each time but it is only taking the first clip.

You can make an Area from a Shape (like rectangle) and then add other clipping elements to that

SCXI 1112 and 1302 doesn't run at the same time

Hi,
I have SCXI 1112 thermocouple input module, SCXI 1180 feedthrough panel , and a SCXI 1302 terminal block connected SCXI 1000 chassis with SCXI 1349 adapter. I am trying to measure voltage by using SCXI 1180&1302, and temperature by 1112 module at the same time. When chassis is on SCXI 1112 runs without a problem; however, voltage reading coming through SCXI 1349 makes no sense (plus I can't run them at the same time, LAbview gives an error). While the chassis' power is off, it is the other way around, SCXI 1349 runs smoothly.
In addition to that, a radiometer, connected to a power supply, is wired to SCXI 1302 terminal block. When power supply is on, SCXI 1112 module's temperature reading is 4 times higher than actual value. In other words, power supply effects the readings.
Could you please give me some advice to solve this problem?
Thanks,
Azra

One piece of the puzzle you left out is the DAQ card being used in the host computer.
Without looking at some specifics on the SCXI cards/connectors you are using, I will comment you must be careful when you are using an 1180 feedthrough module. Keep in mind, the SCXI chassis is Signal Conditioning -- it's nothing without the DAQ.
I would recommend you back up a few steps, simplify the setup and test each input channel from MAX -- making sure you aren't overlapping channels between the 1180 to the DAQ and the SCXI chassis. Remember, most data from the SCXI chassis comes in on a single channel of the DAQ through the 1349.
Hope this might help.
RS

Charging and outputting from i pad at the same time

Similar Messages

Maybe you are looking for