Charging/audio cable connections at the same time

Can't find a cable with a small enough end to fit my headphone port and allow use of the charging port at the same time. Any suggestions? No problem with this on my old iPod Nano 2nd gen with the ports further apart, but they are much closer together on my new 5th gen Nano.

You posted to the wrong area of discussions. This is the 5th Generation iPod group (the video full sized iPods that were released previous to the "Classic" models). If you are asking a Nano question, you want to post to this area...
http://discussions.apple.com/category.jspa?categoryID=265
Regards,
Patrick

Similar Messages

  • 2 wireless connections at the same time

    Hi !
    First, sorry for my english, i am french....(yeah i know i know....)
    Let me explain my problem. I have at home a Macbook pro with Snow Leopard 10.6.7, a time capsule (1To) and a modem/router netgear. It's a big house so my Netgear modem/router in antoher room.
    I would like to use my Time capsule only as an external hard drive (wireless) to have the maximum power of data transmission with the norm 802.11n. I know this norm don't have a lot of range ( 5 meters...)
    How can i configure my time capsule to do that ?
    Will i be able to connect at the same time (with my Macbook pro) to my time capsule (on 802.11n)  and keep my internet connection active ( 802.11 G) through my Netgear router ?
    I want to do that just because my router Netgear is to far away from my macbook pro to use the  802.11n with time capsule. So if connect the time capsule to the netgear via ethernet, i loose a lot of power for the data transmission (too slow the see movie etc, backup copy etc..).
    I hope you understand me and it will be very nice to you to help me.
    Thanks !

    Hi Tesserax
    Thanks for the reply, sorry maybe I didn't explain my idea. I don't want to connect the Airport Express to the router well certainly not via a cable. I want to have the Airport Express basically be a hub for a printer and a couple of external hard drives and not be attached to a modem. I want to try and keep the current modem/router configuration I have, if possible. Therefore I'm asking whether I can have a wireless connection to the router for internet access and a separate connection to the Airport Express for the printer/hardrives. If this is not possible that's ok.
    Thanks again

  • Can I use both Wifi and a Lan connection at the same time?

    With me back in the dorms I have been limited to a slower connection than what I would like. Now we are able to use both Wifi and a Lan line so I was wondering to somewhat "double" my speed if there was any way to use both connections at the same time.
    Now I know that you can have both plugged in at the same time, I guess what I'm asking is, is there a way that I could set programs to use one or the other? Or some kind of virtual desktop that is set to use the other connection or anything that would allow both be used at the same time.
    Or am I just wishing for something that doesn't have any possible way to work?
    -nathan
    MacBook pro 2.16 C2D 2gb ram   Mac OS X (10.4.8)  

    You can use both at the same time, but not gor Internet access if that's what you're asking.
    Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
    Sorry.

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • Multiclips and multiple audio tracks playing at the same time

    I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
    I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
    The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
    I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
    I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
    Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
    G5   Mac OS X (10.4.3)   Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

    ...

  • Can't i use xml schema and oledb data connection at the same time?

    Hello to all and thanks in advance.I use xml schema and oledb data connection at the same time and the problem is that when I try to export the xml, the outcome is not what i expect.Without the oledb connection everything is ok (just the schema) and the xml complies with the schema.
    Can't i have both schema and oledb and the exported xml be as i want it?

    You can use both at the same time, but not gor Internet access if that's what you're asking.
    Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
    Sorry.

  • How do you start 2+ audio files playing at the same time?

    I am trying to play 2 audio files at the same time, but I cannot figure out how to start them playing at the same time without latency issues.
    If someone can please explain the process for doing this using Audio Queue Services, I will forever be in your debt.
    This is for iPhone, but I was getting no love in those forums on this issue.

    Thanks for your reply. Apple's iPhone Application Programming Guide states the Following:
    *Playing Multiple Sounds Simultaneously*
    To play multiple sounds simultaneously, create one playback audio queue object for each sound. For each audio queue, schedule the first buffer of audio to start at the same time using the AudioQueueEnqueueBufferWithParameters function.
    This leads me to believe that it is possible. I have just not been able to get them to play precisely the same time, there is always delay.

  • Recording audio and midi at the same time ??

    Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
    Dan

    Daniel,
    You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

  • Wired and Wifi has to be connected at the same time to not be disconnected!

    I work as a tester for WoW and for the past few months, I’ve had connection issues. I’ve had Comcast come out a few times and they are so eager to leave they look up the speed and say, “Oh you are good on speed” well I’m not. Every few mins I’m disconnected from the server. It’s not my computer and I’ve done every thing WoW suggested. The ONLY way I’m able to stay online for an hour is I have to have the wired and WiFi connected at the same time on my desktop. If you have any suggestions let me know.

    I have posted this many, many times here. See if this helps you understand how this process works with regard to system sounds and screen rotation lock.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Multiple audio tracks playing at the same time?

    Does the Adobe Elements 12 allow us to have mulitple audio tracks playing at the same time? Is there a limit to the number of tracks?
    Thanks!

    Hi Jennifer3211,
    Yes you can play multiple audio tracks simultaneously. The maximum no. of audio tracks can be 99.
    Thanks

  • 2 network connections at the same time

    I have 2 network connections at the same time. One for network shares and one for internet. How can I decide which connection should be used for which service?

    David684,
    Thanks for posting all of this.  I have a similar network question with a very similar setup that I am using with two interfaces. However, I am much less comfortable with the command line than you appear to be (although comfortable enough to crib little tweaks from the web and run them).
    The real difference is the resources I'm after and it seems like more of a problem. In my case, I'm running my home wireless network and can connect at decent speeds, but I happen to live right across from campus where I am attending grad school and I'm picking up the school wifi network. Having direct access to this network, among other things, allows me to access library research journals and databases from home without constantly needing to authenticate. But it isn't nearly enough to accomodate all of my network needs. The key difference, then, is the fact that these come in the form of websites. But I want to access only library stuff over that we-fi connection and do everything else from the LAN.  I use an app called papers for research, which has a built in web browser to allow me to pull up articles and then save them. Would that help me by allowing me to have just that program use wi-fi? I am not sure if the app is using an embedded safari session or it's own home-rolled browser, or how to check in the first place (OR if that makes a difference as far as being able to route the app's traffic to that interface). Also, with all of that said, how could I find out the subnets over which to route this if what I'm going after is a far less tangible resource than an SMB share? I am guessing I need a different method or that none exist?
    Thanks

  • Can I turn off the wireless and use the wired connections at the same time?

    Can I turn off the wireless and use the wired connections at the same time?
    This is to avoid transmission when I work without the need for wireless

    Yes, you can. Just open the web interface of the router. On your browser type the IP address of your router, usually http://192.168.1.1 go to wireless tab and disable it.

  • Can i use & charge my iPod Touch at the same time??

    If i am using and charging my iPod Touch at the same time. Does it damage the battery??

    Yes you can use and charge the iPod Touch at the same time.
    You can not use and Sync iPod Touch at same time though as Syncing will not allow you to use the touch till it is finished or you cancel the sync.
    If you do use it while charging just keep in mind as you use it you basically got a Charging/Discharging action occurring during this time. So it is best to let it charge as much as possible. Disconnect and use.
    But if you have immediate need to access something you are ok. If you got a Dock station that has speakers that work with touch. Some of these Dock stations will charge touch and allow you to listen to music at the same time.
    http://www.apple.com/batteries/ipods.html

  • Charge and connect at the same time

    I'm still waiting to get an N8 so can anyone tell me if it's possible to connect up a charger at the same time as using USB to connect a keyboard/mouse and external storage device via a powered usb hub?
    In other words, can I use USB devices while it is being externally powered?
    What about when it's using a dock that I've briefly seen on some youtube videos?

    Sorry, but we're not allowed to speculate about future releases on these forums.
    Cheers!
    -Bryan

  • Can I configure my Bluetooth connections to use more than one wireless audio output device at the same time?

    I am trying to get my Macbook Pro (OS X 10.8.5) Bluetooth system to recognize 2 different wireless speakers at the same time. both are currently paired with mu computer and can be chosen independently and work nicely.

    Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
    iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
    You can have as many Projects as you like. You don't need ot finish one before you begin another.
    Post back if you have specific questions.
    Matt

Maybe you are looking for