Charging cable needs to be adjusted to charge

When hooking phone up to the lightning charging cable I have to adjust its position in order for it to charge. I frequently clean out the lint at the connection site.

mine too, just that the problem is on the left side. dont think it'll be a big problem though, so i just left it. the difference is probably only about 1mm

Similar Messages

Award amount need to be adjusted through salary

Hello guys,
I have a scenario in which award amount need to deducted/adjusted through salary which is already paid in cash at the time of declaration. I have no clue as how to deduct award amount as shown in credit side of the salary slip.
                                                       SALARY SLIP
Dr. Side                                                      Cr. Side
Award (paid in cash is created)      200,000    Award (adjustment) -200,000
                                                                   Withholding tax          10,000
Thanks in advance
Anand

HI
How did you paid ?
I mean did you enter the amount in It15 , offcycle?
if you paid in offcycle then then it will be taken care.
If u just paid cash without entering in SAP is also can be done just by entering the relevant wage type used for your company and enter the amount.
<b>Reminder : Points should be given on answers.</b>

What settings need to be adjusted to send out Dolby digital ,DTS from inputs such as Netflix to the video output via an adaptor to HDMI?

Hi. I can only stream picture and PCM out of my Mac BookPro. What settings need to be adjusted to output Dolby Digital or DTS to an HDMI adaptor had thence onto my AV Processor?

The Audio Midi Setup utility may need to have its settings updated.
That's if you have the right adapter:
https://discussions.apple.com/docs/DOC-2821

Fireworks CS4 to CS6 - is there a setting that needs to be adjusted so that web pages look right in

Fireworks CS4 to CS6 - is there a setting that needs to be adjusted so that web pages look right in Internet Explorer? I was in the middle of creating pages with Fireworks CS4 and exporting them to Dreamweaver CS4 and publishing them to the website. Those pages looked fine. Then I upgraded to CS6 and the pages look fine in Fireworks, Dreamweaver and when I preview them "live" in Chrome but not Internet Explorer. Anyone know why? Also, with upgrading the software I upgraded to a new computer. Any and all suggestions are welcomed. Thanks!

Most likely caused by a missing document type declaration (DTD). Truth is, the HTML code generated by graphics apps is not web worthy. It's really only intended for quick mock-ups to show a client before you rebuild everything with CSS & HTML code in Dreamweaver.
This 3-part tutorial describes how to take your Design from Fireworks or Photoshop to a CSS Layout in Dreamweaver.
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
Nancy O.

Why are my webpages taking so long to load when I am having no router, connection, or modem problems and am getting 20mb/s on speedtest? Are there settings that need to be adjusted?

Could it be settings that need to be adjusted somewhere? I'm using osx lion 10.8.3 and google chrome.

Did you test with other browsers and pages still load slow?
If so and/or if you want, run a OnyX cache cleaning routine #12 here
Step by Step to fix your Mac
If it's Chrome, you may want to uninstall it and it's rook kit messing up the OS X works.
Uninstall Chrome: https://support.google.com/chrome/bin/answer.py?hl=en&answer=95319
Google root level auto-updater: to uninstall that (provided you have no Google software on the machine)
https://support.google.com/installer/bin/answer.py?hl=en&answer=100386
Firefox with the broadband tweaks is the fastest browser on Mac's, (Safari is without the FF tweaks.)
See #6 Browser Tweaks for speed
For Snow Leopard Speed Freaks
Web pages snap violently and instantly on my screen unless there is a server issue or high winds are messing with the lines.

Using Aperture, is it possible to do perspective or parallax correction? Say I've taken a photo of a rectange and the angles of the rectangle need to be adjusted so that each corner is 90 degrees.

Using Aperture, is it possible to do perspective (or parallax) correction? Say I've taken a photo of a rectange, a painting for example, and the angles of the rectangle need to be adjusted so that each corner is 90 degrees. When I was using a PC, I often did this with Corel Paint Show Pro, which makes this an easy job, but now I'm using MacBook with Aperture and have so far failed to find this feature.

Aperture seems to maintain a one-to-one correspondence between imported pixels and pixels in adjusted Images. Distorting the Image creates a one-to-many relationship. My guess is that this introduces the need for a second level of information storage (in fact, a whole new file). Aperture is expressly designed to avoid that.
I'm just guessing about Aperture (having felt all around it, but still blindfolded), but I thought it might help to comprehend this basic limitation of Aperture and how it determines the workflow one uses for Aperture.

Is Cable needed for USB Charger Accessory?

I want to buy the separate charger 'accessory' ($29) for charging by iPod. Do I need to buy a separate cable for it or does the cable that is used to sync/charge my iPod via my computer's USB 2.0 port work with it?
Thanks,
Bill

Hi Bill,
The USB Cable will work. But some models of iPod's dont charge over USB - what model do you have?
-Travis

DVI to S-Video & Composite plug cable needed for output to audio/TV system

I'm in need of a DVI to S-Video and Composite plug cable to replace the Monster iTV Link cable I used with my 12" Aluminum PowerBook. (http://www.monstercable.com/apple/Computer.asp) I use it to output to my audio/TV system.
Whereas the PowerBook used a mini-DVI port and had the audio output jack on the same side of the computer, the MacBook Pro uses a full size DVI port and has the audio jack on the opposite side!
I've been unable to find a cable so that I can connect up to a TV. Does anyone know where I can find one? Or perhaps a DVI to mini-DVI adapter? Or perhaps a VGA to S-Video/Composite cable and I can use the DVI to VGA adapter that came with the computer?
This is very frustrating!

Apple's video adapters have a ROM chip inside them with EDID data contained within the ROM. That is one thing that will definitely be different between the two. The NTSC and PAL version (M9267G/A) gives priority to NTSC. This could cause problems in a PAL country. If you hooked a PAL TV up using this adapter, you might get a rolling (non-synced) screen and you'd have no good way to recover since the image on the screen would be unusable.
I don't think one adapter would have any advantage over the other in terms of PAL picture quality. It would just be a question of compatibility as outlined above. That's my best guess.

I need to transfer video from a camcorder to my iMac what cables needed?

I have an old Canon Optura 300. I just realized that it still has a tape in it with important memories I would like to preserve. I suppose I could get a disk made, but I would rather do the transfer to my imac myself and have the "tools" needed. According to the Canon tech I spoke with, I need a DV IEEE1394 4-pin cable. But since that's a firewire cable I will also need a converter in order to use it with my iMac. Does getting the "Apple Thunderbolt to FireWire" adapter make sense and is it the right way to go in order to transfer the video onto my computer? Do I need anything else to complete this transfer?
Just checking—I know there's no better place to go for my answer than this site. Thanks, Joan (still OS X 10.8.5 for now)

OK, so that part is correct. Then, do I just hookup and it automatically goes onto my computer? What will capture it, or will it simply show on my desktop and I need to open it with...what?

Need help with adjusting Javascript code to work in Adobe Edge (Countdown)

Hello
Im a newbie when it comes to working with Javascript and Adobe Edge and need a bit of help with adjusting some javascript code to work with Adobe Edge. A friend of mine helped me with making this javascript code: Edit fiddle - JSFiddle
Its a simple countdown which counts down to a certain time at a certain date. What I aim to do is to add this code as a trigger on a text-element called "countdown" (within a symbol called "count").
I have tried to do this as the code is, but it does not work. Anyone have any suggestions?
Thanks!
Mvh,
Øyvind Hermans

Hello again
I have stumbled upon a problem with these animations; They crash the browser after viewing them a little while, usually less than 30 seconds in.
Is this problem also occuring when you watch the animations?
Is the countdown-code to much for the browsers to handle?
Thanks in advance for your answers.
Sincerely,
Øyvind Hermans

Extra power cable needed for a SATA drive in a G4 AGP "Sawtooth"?

If one adds a SATA controller card and a SATA hard drive to a G4 AGP "Sawtooth", will a power cable like the one at the below link be needed, or would the necessary power cabling ordinarily come with the drive?
[http://eshop.macsales.com/item/Micro%20Accessories/SATAPAY>
-John

Thanks for the additional information, japamac.
That would be Left (or right angle 270º) for the data cable.
Which of the below data cables would be more appropriate, the 18" long one or the 39" long one?
[http://eshop.macsales.com/item/Micro%20Accessories/SATA18L>
[http://eshop.macsales.com/item/Micro%20Accessories/SATA39L>
Power connectors would be a left angle 90º to get wires going up.
I found the below two (the first is the same one linked near the top of this thread):
[http://eshop.macsales.com/item/Micro%20Accessories/SATAPAY>
[http://eshop.macsales.com/item/Micro%20Accessories/SATAPA>
Is it okay to have one of the ends of a "Y" cable remain unconnected? I've done that with my existing ATA power cables, but I wanted make sure that that is also okay with the SATA power cables.

Cable Needed For Dual Monitors iMac 9.1

Hi,
I want to connect a (VGA) lcd screen to my imac 9.1 - Intel Core 2 Duo, but i have no idea what cable to buy...
A DVI to VGA, Mini displayport to VGA, mini DVI to VGA...
I want to buy this because i want to run 2 monitors, so i have more screen space
Thanks in advance!

Hi,
the iMac 9.1 (otherwise known as the "Early 2009" model) has a Mini DisplayPort output port http://support.apple.com/kb/SP507
So a Mini DisplayPort to VGA adapter is what you need http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg
Hope it helps
Stefan

Cable needed to present Keynote from Macbook? In College.

I have a new Macbook and want to take my macbook so i can present a keynote presentation i created. this will take place at my college, which all classes has a projector (but its mounted on the ceiling) and the projector is connected to a computer, with Windows.
What cable do I need to connect my macbook to a computer with windows and display it on the projector?
im not sure if there is a projection connection near the front of the class but if there is, is there a simpler cable to use?
How much do these cost?

The above post is correct, but a little more specific to your question - I don't believe you can connect from your mac to a windows machine to display.
The connections mentioned are what you need. You just have to disconnect from the windows machine and use the adapter to connect to your laptop. I have to do this alot. It's a little pain in the rear but is what you have to do.

Cable Needed To Connect To HDTV?

I have a Macbook and would like to hook it up to my new Vizio HDTV.
What cable do I need to accomplish this?
Here is a link to what the connection on the Vizio TV looks like in the back:
http://img.photobucket.com/albums/v370/WhammX/0805081307.jpg
Now, here is a link to a cable I already have, though obviously does not connect to that Vizio output:
http://img.photobucket.com/albums/v370/WhammX/Untitled-1.jpg
So what cable do I need to purchase so I can connect my Macbook to my Vizio HDTV?

I dont have any experience with vizio televisions but your best bet (to avoid confusion) is to just finish the set up you already have. You will need to buy a cable like this:
http://www.provantage.com/belkin-av21401-06~7BELD018.htm
to connect your laptop adapter to your tv.
If you want to hook up your sound, then you need a cable like this:
http://www.milkhoneyland.com/male-35mm-to-male-x-35mm-extension-audio-cable-p-77 2.html
Plug one end into your "Audio In" port on your television and the other into your laptop headphone jack. You should be able to find both these cables at any local store with an electronics section such as a Walmart or Best Buy.
Hope this helps

Cable needed to output video to TV

I'm a complete neophyte, when it comes to using my computer to watch video in my TV. I have a MacBook, model identifier 5,2. What cables would I need to transfer video from the Mac to a TV with HDMI connectors. Can it be done?

You will need an adaptor from your video port to HDME if your TV has HDMI ports. Your model has a mini-DVI port so you need an adaptor to go from mini-DVI to HDMI. Check the Apple Online store. Griffen has a multi-use adaptor that may work. If not check adaptors from Kanex(.com).

Charging cable needs to be adjusted to charge

Similar Messages

Maybe you are looking for