Charging icon appears but not recognized by computer help!!!

Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
What's going on???
HELP!!!!

Have you tried a different cable?
This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
MJ

Similar Messages

HT201412 My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..

My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
and
try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Iphone 5 plugged in and charge icon appears but iphone does not charge at all.. Please help!

Iphone 5 not charging after connected via usb and charge icon appears and charge sound occurs.. Need immediate help! Thank you!

To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?

Nano won't charge/turn on/not recognized by computer help please

i have a new nano, i installed the software, but when i plug the nano in the computer acts like it does not even recognize it, it won't charge, nothing appears on the screen, i tried to install software and connect to another computer doesn't work either i tried all usb ports on baoth computers but nothing help please

i have tried just about everything i could find on the website i am just really confused and hoping it is not something i'm doing but since i pulled it out of the box nothing has came up on the screen and it will not charge when plugged into the usb the comuter does not even recognize

Ipod charges but not recognized by computer or itunes

When I plug my 5th gen ipod into my computer it charges up but it isn't recognized in the computer or itunes. The ipod has worked in the past and I just updated itunes to the latest version but it still doesn't work.Can anyone help?

You might check out this document:
http://docs.info.apple.com/article.html?artnum=61711
Diane Wordsmith

IPod dock (Wharfedale IS73) charges 8/16GB but not my 32GB. Help?

My Wharfedale IS73 MicroSystem won't charge my 3G 32GB touch, it says it only supports 8GB and 16GB, is there anything I can do to allow it to charge?
Thanks in advance everyone
Rory

Oh right ok. Is there any way around this then? An app or reverting to an earlier version of the OS?
It plays the music on my iPod it just doesn't charge.
Thanks again
Rory

Ipod Nano not recognized by computer (or itunes) but charging.. so connected

worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
can't find it looking in Explorer
but, it is charging so... it is connected
have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
would that make any difference?

diagnostic shows....
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: Y(I removed info)
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
it looks like everything is fine, except it can't find the ipod... why?
when I plug in a thumb drive, it recognizes that, why not the ipod?

HT4310 why can I see a battery charging icon on one computer when my 4th generation ipod is connected, but not on another computer ?

I have a fourth generation ipod. when I plug it into my windows 7 pc at work, the battery charge icon appears. when i plug the same ipod into my windows 7 pc at home, no battery charging icon appears. any way to get it to show?

Are you plugging the iPod into a high powered USB 2.0 port at home? Do you have any other devices that are connected via USB on your PC at home?
I assume you are using the same cable you used to plug the Shuffle in at work?
B-rock

My iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if you leave it for a night the icon will remain on the screen but there will be zero percent. I tried five different charges and plugs

my iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if I leave it for a night on charge the charge icon will remain on the screen but there will be zero percent of battery. I tried five different charges and plugs [ one in the apple store], same result. Any suggestions please?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

Drive appears in device manager but not in My Computer

I just wanted to post a solution that took me about 2 hrs to solve. Issue was, my firewire WD TB drive would be seen, by XP (SP3) on boot camp, in xp's device manager but not in My Computer. My goal was to format this as an NTFS drive for my boot camp files. I was unable to format this in Leopard as ntfs either. I tried installing HD drivers and formatting from leopard as FAT32 (just so Windows would see it) but all failed.
The solution I used was as below. (this would not work if you want to retain data on the drive, I didn't care as I was setting up an old drive and reformatting from scratch). Solution:
- Download free 10-day trial of Paragon's NFTS for Mac.
- Install on Leopard (note app seems sparse after download as if it didn't work) but... then...
- Open Disk Utility, you'll notice more options under Erase>Format Options drop down. Paragon acts like a plugin it seems and gives Disk Utility NTFS format options. Don't erase yet...
- Go to Partition tab, Select 1 partition and the options and select Master Boot Record and partition. (Win XP didn't see my 2nd partition when I did this so maybe it can only see the one). Anyhow create 1 big MBR partition.
- Then, go back to erase if you want and zero out.
Drive should then appear when you restart in XP.
I reformatted here from xp too just to be sure that the drive would be fully xp compatible though not sure this would be necessary.
BTW - I also had a 120GB usb drive with the same issue. For some reason with this one I was able to simply erase as FAT32 from leopard without the Paragon plugin and it showed up in XP. Go figure.

Hi Simnap,
Unfortunately Windows XP can only read hard drives that are 2 TB's or less due to barriers set in place by the age of the operating system and the hardware of that time period, even if its still used now. So you may have to partition the drive into (2) 2 TB's or (4) 1 TB's in order for XP to see it. Mac OS X supports 4 TB and above, just not XP.
Kind Regards,
Sidney S. Ramirez

When I switch on, the Apple and progress icons appear but it does not start.

When I switch on, the Apple and progress icons appear but it does not start. I tried resetting PRAM, Utilities, everything. It says the system is OK. I even reinstalled Tiger, but nothing has changed.

Given that you were able to reinstall the OS, you must be able to boot from the install disc.
Have you run Apple Hardware Test?
Tried running on just one RAM module, then switch it to other slot, then repeat with other module?
Safe Boot?
Checked SMART status?
Run Repair Disk:Boot from install disc (insert disc > restart > immediately hold down ckey and keep holding it until you see “Preparing Installation”) > at firstscreen select the language and click Continue > click on the Utilities Menuin the menu bar > open Disk Utility > select your HD in the panel on theleft side> click Repair Disk at bottom of main window. Run this at leasttwice, and keep running it until it says “appears ok” twice in a row. If thatdoesn’t happen, you may need a stronger utility such as DiskWarrior or if thedirectory is damaged beyond repair, you may need to reinstall the OS, or youmay have a damaged HD (repair utilities can only repair the directorystructure, not the HD itself). When this is finished, quit Disk Utility, quitthe installer, and restart. Once booted normally, go to Applications >Utilities > Disk Utility and run Repair Permissions.

Curve not recognized by computer

hello, i baught a blackberry curve on ebay (big mistake!) it functions as phone, but is not recognized by computer. when i plug it in via USB it connects for a second and then stops, i.e. synchronization is not possible.
i reset the device, reinstalled the DM software, spent hours trying to solve this issue nothing works - any help?
btw, under 'manage connecetions', USB does not appear at all.
thank you so much for any input

prior to doing anything, you need to install the USB drivers.
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
after you have checked everything is okay, you can do the next step, that is install the Desktop Manager.
Moreover, ou can wipe your device so that there is no remains from the previous owner.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

Thanks, but I've checked those articles out already. I drained the battery and finally got the needs charge (battery w/red line + arrow pointing to a charging bolt), I plugged the USB into the laptop and held down the start key +home key until I saw the apple logo. However, it still was not recognized by itunes. It's been plugged in for over an hour now and the screen is cycling apple logo/low battery (battery w/red line)/and black screen.

ADE installed but not recognized

I am using Windows 10, a Nook, My Media Mall. ADE is installed, my computer authorized and I am activated. When I download an E book, it appears to be downloaded, but when I try "open with" the only option showing is Adobe Reader. Then, I look for other programs but ADE is not listed as an option. Is there something I have not done?

Windows 7 and IE 11 ... I also use Firefox, for business only.
Steve
Date: Mon, 27 Jan 2014 18:33:18 -0800
From: [email protected]
To: [email protected]
Subject: Installed but not recognized
    Re: Installed but not recognized
    created by Mike M in Installing Flash Player - View the full discussion
What OS?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6058928#6058928
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6058928#6058928
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6058928#6058928. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Charging icon appears but not recognized by computer help!!!

Similar Messages

Maybe you are looking for