Charging iPhone 3Gs with original iphone charger

A coworker told me today that I shouldn't charge my iphone 3gs with my old cable because it doesn't regulate the charge the same and you could over charge the battery and ruin it over time. Any truth to this? I don't want to have to go out and buy new cables.

New phone uses the same cables as any of their other current products. There is no worry.
Now some of the original iPOD cables are different as back then they used 10W I believe, while the newer generations and current for both iPods and iPhones use 5W.
So if not using a VERY OLD cable from early iPODS (original iPhone used newer one), you should be fine.
Message was edited by: DaVBMan

Similar Messages

  • HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

    I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
    What I should do now?

    Something has gone wrong. Turn your phone off, then force it into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

  • IPhone 3gs (with full charge) went dead in middle of playing a podcast

    My iPhone 3gs had a full charge. In the middle of listening to a podcast, it just suddenly stopped playing, and the screen went blank. The iPhone is unresponsive, no matter what buttons I press and hold. Nothing happens when I plug it into my work computer via USB (I was hoping it would cause it to start doing something...anything). The work computer doesn't have iTunes.
    Is there a chance my iPhone 3gs will come back to life once I connect it to it's home iMac, that it syncs to iTunes with?
    Any other suggestions?
    Please and thank you.
    Wayne

    Well if the battery did go dead then you cannot charge off USB...USB requires the phone to send signal to computer that it is connected so the computer knows it is there to send charge back. If it is dead, you have to charge off wall adapter.

  • Iphone 3gs wont accept a charge.

    My iphone 3gs wont accept a charge at all,  not from its original ac adapter, usb or aftermarket ones.Once the phone goes flat and turns itself off it charges back up until it powers up then nothing again.  and the small amount of charge it did get only lasts about 1 hour.
    I cant do a back up and/or reboot coz the usb doesnt connect either...  What do I do?

    I forgot to mention,  this phone is only 8 months old but it's out of warranty coz it was a new warranty replacement for another one that stopped working.  I was told this one only got the warranty that was left from the other one??

  • I  spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct tho

    I  spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct this and reimburse me for this cord.

    Charging cords are covered by the iPhone warranty or their own warranty
    if puchased separately. Take your iPhone and the cords to your local
    Apple store for evaluation and possible replacement.

  • How well does the wireless "Wild Charge" pad work with the iPhone?

    how well does the wireless "Wild Charge" pad work with the iPhone?

    I have tried similar things, and no, it has not become corrupted. So it should be fine

  • Can you charge an ipad with an iphone charger

    can you charge an ipad with an iphone charger?

    Yes, you will cause no damage... it will just take a lot longer...
    iPad Charging
    "The fastest way to charge your iPad is with the included 10W USB Power Adapter.
    iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
    When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
    Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."
    See...  http://support.apple.com/kb/HT4060

  • IPhone 3Gs will not sync/charge on my mac OSX 10.4.11

    My new iPhone 3Gs will not sync/charge on my mac OSX 10.4.11, but will charge on my friends OSX 10.6.7, what do I do?

    Call AppleCare and ask them if they still have an available copy or check on Amazon, eBay, etc. If your computer will support it you will be better off buying a retail copy of Snow Leopard instead.

  • I charged my ipod with an iphone charger and wont turn on.. what to do?

    I charged my ipod with an iphone charger and wont turn on.. what to do?

    Try here
    http://www.everymac.com/systems/apple/ipod/ipod-faq/ipod-troubleshooting-wont-tu rn-on-appear-hung-sad.html

  • IPhone comes with a fully charged battery pack, or 50%?

    iPhone comes with a fully charged battery pack, or 50%?

    weld02 wrote:
    So I would like you to find out.
    You do realise you are not talking to Apple here? We are just volunteer users. For the last time, it does not matter what charge the battery has when you buy an iPhone. If you want to believe that iPhones arrive with a 100% charge, you find out if it's true.

  • Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

    genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

    Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
    Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

  • Problems synching iphone 3gs with outlook 2010

    when I sync my Iphone 3GS with Outlook 2010 using ITunes, I am losing contacts?

    Yes I have a similar problem.
    I lost all my contacts (today 23rd Mat 2011) on my 3G iPhone and the Address Book on my Mac Pro also.
    The contacts in my MS Outlook were intact  I run Outlook:Mac 2011.
    They have only just fixed the issue with the Calendar in this version 2 weeks ago an MS issue.
    I plugged in the iPhone last night to charge and synch and this morming the phone had no contacts and I had lost all the address Book I had some  group headings  (greyed out)
    It's almost like a plot to get Outlook users frustrated and make them switch but, Outlook is too good.
    Outlook:mac 2011 contacts does not synch with Mac address book

  • Unable to restore iPhone 3Gs with iOS 4 (error 1013)

    I recently updated my 16GB iPhone 3Gs with iOS 4 (iPhone2,14.0_8A293Restore.ipsw) using iTunes 9.2 - it worked fine for a few days then all of a sudden I got a pop up message saying "you are unable to make or receive calls, please connect to iTunes". I did so and restored the firmware, it went through the whole cycle, unpacked, installed, verified and when it was about to be completed I got the following error from iTunes:
    "The iPhone "iPhone" could not be restored. An unknown error occurred (1013)"
    The phone remained in restore mode (iTunes icon and USB cable). I tried restoring again with the same result. I then deleted the firmware file, rebooted and reinstalled (same error). I then deleted a reinstalled iTunes (no dice). I tried alternative USB ports and cables and also tried on 2 other computers and tried all this in DFU mode too yet nothing has worked.
    I would also like to point out that it is an original O2 phone with O2 chi[p that has *never been jailbroken*. Any ideas as to whats wrong? Or what I can do? Thanks in advance for you help!

    OK, so nothing else was working so I took my phone into the Genius bar and explained what had happened. The Genius said He was unsure what error 1013 was so he looked it up and explained "It's an error related to the baseband and that more than likely the phone was unable to communicate with Apple servers as Apple had the phone marked as non existent"
    He continued to explain that there was a fix he could do but would be quicker and easier to replace my phone. He did so and I left happy.
    I recomend you just take your phones in if you are having this same issue!

  • IPhone 3GS with iOS 5 and storage space/app problems... Please read and help

    I have an iPhone 3GS with iOS 5. Before the update I had a load of apps etc and was left with approx 4gb space left. Since the update removed ALL my apps from my iPhone, I still have the same ammount of space. Why is this?

    Hi,
    Are you sure your phone has not been unlocked or jailbroken at some time as the same thing happened to me.
    I had the phone secondhand and did not know. Updating to IOS 5 locked the phone back to the original service provider which was AT&T in USA and I am in UK.
    Hope this helps,
    Alan

  • HT4623 I have Iphone 3gs with os42.  After I upgrade to os6.11. I unable active my phone. Please help!

    I have iPhone 3GS with OS4.2.  To, I try to upgrade it with ituon 6.1.1.  After upgrade I unable activate my iPhone.   Then I try to restore back, but after restore, I still unable to activate my phone.   I with T- mobile, but they told me to call Apple.  Please help!

    Your iPhone was hacked/jailbroken in order to unlock to to work with T-Mobile. When you updated it you broke the hack and the iPhone is now locked again to the original cell provider, most likely AT&T.
    You can see about unlocking it with AT&T by using this form, if you qualify: https://www.att.com/deviceunlock/client/en_US/termsAndCondition
    After unlocking you will need to use Google and learn the procedure to clear the unlock hack and Restore it.

Maybe you are looking for

  • IDE plug coming loose

    I've got an MSI mobo KT3 Ultra mobo for AthlonXP's, and I'm having a problem where every once in a while the IDE plug gets loose where it plugs into the motherboard. I've got both my HD's plugged in on this cable that's getting loose. Any ideas for s

  • Upgrading From Final Cut Pro 5 to 6 - can you use full install disk?

    Hi, I have one MacBook Pro running Final Cut 6 (with Final Cut Studio 2), and another one running Final Cut Pro 5 (with Final Cut Studio). We're looking to upgrade the second one to Final Cut Studio 2. Does anyone know if the upgrade can be done with

  • Permanently Disabling Fan Lights on HP Omen

    Is there any way to permanently turn off the rear vent lights on the HP Omen? Using the Omen Control utility and dimming all leds to 0% works only for one session. After closing the notebook lid, setting it to sleep, or a shut down, the changes are c

  • Can anyone pls explain what this procedure does?

    i could only figure out that it will be performing a transpose. create or replace PROCEDURE TEST_TRANSPOSE(o_test OUT SYS_REFCURSOR) AS report_exists number(3); report_name varchar(30) := 'REPORT_TBL' ; query_main varchar(16000) := 'create table ' ||

  • ACS 5.4 Access Policies Problem

    Hi Gents, I've been trying to troubleshoot this for a long time but I'm out of ideas now. here is the topo. I've got a Cisco ACS 5.4 VM used for Radius Network Authentication with a Cisco WLC 7.0, I've done the initial setup and all the rules, everyt