Charging iphone 4s by computer with Ios7 software

So I have recently downloaded the new Ios7 and have not had trouble with charging my iphone 4s. I always have a proper connection cable at work seeing as the battery is drained by listening to music by the time I leave home until I sit at my desk.
I found the "trust, do not trust" aspect annoying however I like to download my photos from my phone to my work computer so I'll put up with it. I have just clicked trust and now my phone has stopped charging!
Even when I click trust there is no connection so I can no longer download the photos onto the computer.
I've turned the phone off and no and restarted my computer and still nothing =(
Anyone else having this trouble?

Hi there cparlam,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
-Griff W.

Similar Messages

  • HT4623 How do I update my iphone 5 to the new ios7 software using itunes on my computer?

    How do I update my iphone 5 to the new ios7 software using itunes on my computer?

    Just for clarity, do you have iTunes 11.1 now on your computer?  If yes, when you connect your iPhone via your USB / Lightning cable is your iTunes opening with a small box near the top right of screen that shows your iPhone connected?  If yes then you can click through the various views of your iPhones content areas, such as Music, Photos, etc.  You will eventually get to a screen that is Status.  On that screen you should see the iOS Update option. 

  • De-authorizing itunes? Several of my authorized pc's have died, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Several of my authorized pc laptops and desktops have completely died over the years, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Deauthorise all to reset to zero, then authorize again.
    Following quote from Apple Support:
    If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

  • HT5649 Our family has a shared computer with itune software. We have multiple apple devices and multiple itunes accounts. Can we share the computer and iTunes software to back up each apple device separately?

    How do multiple users with multiple devices share one computer with iTunes software to back up multiple devices and individual iTune libraries?

    Hi Goodguy147,
    Welcome to the Support Communities!
    The easiest way to have multiple users with multiple devices share a single computer is to create a User Account on your Windows PC for each person.  Each person should also have a unique Apple ID.  That will keep each individual's iTunes Library separate from the others and each individual can associate and backup several devices to their iTunes library. 
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    The article below is a troubleshooting article for Windows.  I'm just quoting the section from it that explains how to create user accounts:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717?viewlocale=nl_nl
    Follow the steps below to create a new user account in Windows Vista or Windows 7:
    Choose Start > Control Panel.
    Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
    Select "Create a new account" and follow the instructions to set up the account.
    Once you create the new account, choose     Start > Log Off.
    Log in to the new user account.
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    I hope this information helps ....
    - Judy

  • IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

    iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
    I Don't know if I can turn it of or do I just leave it and take it to service?
    I'd appreciate some advice!

    Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

  • Find serial-number of PSP El.12 on new computer with incl. software

    I bought a new computer with the Software Photoshop element 12 included. Now I want to register the software with my Adobe ID but I have no serial Nummer.How can I find the serial-Number on my computer? Thank you

    The serial number is not visible anywhere in PSE, at least not the whole number. You need to contact whoever loaded PSE onto the computer, if you didn't also get a disc, in which case the number is usually on the paper sleeve.

  • How can I connect my iphone to my computer with the new upgrades? My mac (old) cannot support the new itunes and my phone can't connect to it.

    I have a macbook that I purchased in 2007 with operating system Mac OS X Version 10.5.8. I recently did the new software upgrade on my iPhone and now my iPhone and my computer cannot connect. I tried downloading the newest iTunes but it is not supported by my software. What can I do now? (Other than buy a new computer).

    Is the new iTunes library on a different computer, or the same computer?
    Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
    Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

  • Charging iPhone 3G While Computer is Off/Asleep/Standing By

    I recently purchased an iPhone 3G and its dock, but it turned out that I cannot charge the iPhone via USB while my computer is off, asleep, or standing by even though the dock is connected to a third party's AC-powered USB hub, which enables me to charge my iPod nano (1st gen.) in the same situations.
    I know I can charge the iPhone anytime if I use the Power Adaptor came along in the package. However, switching between the connection to the USB hub for syncing and charging, and to the Power Adaptor just for charging when I don't use my computer is kinda troublesome for me. I mean it would be great if I could keep the iPhone on the dock for charging regardless of my computer's status.
    Does anyone know any AC-powered USB hubs with that capability?

    Yeah, wouldn't it be nice to just walk in the door and pop the iPhone into a dock and know that you'll have a functioning phone in the morning? I've tried a few things to no avail. Allow me to list:
    -USB hub connected to computer only works when the computer is on
    -USB hub on AC only - nothing
    -USB hub on AC and connected to computer only works when the computer is on
    -USB hub connected to iPhone's AC adapter - nothing
    -USB hub connected to it's own AC and iPhone's AC - nothing
    -USB "Y" cable works when the data/power end is plugged into an awake computer or the iPhone's AC adapter
    -USB "Y" does not work across the power only end at all no matter what I've plugged it into
    -The Wii and Tivo will charge the iPhone straight up as will a USB battery I have
    -Tried my leftover Xbox 360 HDDVD drive for fun and no charge (I didn't hook the drive to my computer, just plugged it into the wall)
    All I can guess is that the iPhone needs some sort of phantom data signal from an awake computer source or it's AC adapter. I want to try a USB A/B switch. If it weren't so costly I would try a wireless USB hub to see if it provides that phantom data at all times since it isn't connected to a computer at all (or possibly the opposite being true that it will never sync since it isn't connected).
    Talk about annoying. If there was a true "Y" USB cable than theoretically I could plug one end into the wall and one to the PC.

  • Cannot sync multiple iphones on 1 computer with multiple accounts

    I have had no problems until recently.  I have 2 iphones that I sync with two different users on 1 Windows 7 PC.
    I was always able to sync the respective iPhone with the iTunes on each individual account without any problem.  Now, it freezes up on 1 of the accounts, but works on the other.
    I have uninstalled and reinstalled iTunes.  One sympton I noticed while troubleshooting is that it seems like iTunes is getting corrupted because even without syncing, if I select Edit/Preferences iTunes starts to hang.
    .  Here is the sequence of events after uninstalling / reinstalling the last time:
    -  After verifying the install, I made sure that on both user accounts, iTunes was operating normally.  I did this by starting it up and playing a few songs and going to the Preferences, which it did quickly on both accounts
    -  On account 1, I synced iPhone 1 without any problems.  Exited iTunes.  Repeated a couple of times
    -  On account 2, verified that iTunes was working properly again
    -  Attached iPhone 2 on account 2 and it hung. Also gave me this error:  "iTunes was unable to load data class information from sync services"
    -  Now whenever I try and run iTunes on account 2, it plays songs but as soon as I try and access Preferences it hangs
    -  Running iTunes on account 1 and syncing account 1 is still no issue
    This is very frustrating because I have not been able to sync iPhone 2 for a couple of weeks now.
    Thanks.

    Any help?  If I unistall and reinstall iTunes, which ever account / phone I sync to first works, but the other account / phone will not work.
    Is there anyone else out there who is successfully syncing 2 phones on 2 accounts on one computer?  Why isn't this working anymore - it worked fine for over a year until now?

  • How do I upload the pictures from my iphone to my computer with windows 8 os

    I recently got a new computer with Windows 8 and it doesn't automatically upload the pics from my iphone like it did with my other computer.

    Read here:
    https://discussions.apple.com/thread/4554986?start=0&tstart=0

  • HT201210 updated iphone on shared computer with 2 other phones.Now itunes asked for those phones password not mine.How to solve?

    updated iphone 4s to ios 7. 0n a shared computer with 2 other iphones. Now app store goes to others 2 phones itunes account. what is fix?

    Are you sure both phones have diffrent Appple IDs when you are logging in to iMessage and FaceTime.
    Check under Messages in the Settings menu.

  • New Computer with Upgraded Software

    I have a new computer with the Photoshop and Premiere Elements version 11 installed.  On my old computer I was using Photoshop version 5 and Premiere version 3.  I am able to backup my tagging in the organiser, but it simply won't import into the new version.  Do I need to uninstall version 11 on my new computer, upgrade the old computer and then somehow transfer this to the new computer for everything to work properly.

    From PSE6 onwards a different database was introduced. But it is possible to convert the catalogs from earlier versions and even from the very old Photoshop Album software. The Photoshop Elements Organizer is now called Elements Organizer as it is shared by both PSE11 and PRE11.
    http://helpx.adobe.com/photoshop-elements/kb/common-catalog-issues-upgrade-elements.html#m ain_Diff_Elements345
    There is no need to uninstall from your new computer. There are two possible methods depending on the number of files you have.
    (1) Install another copy of PSE11 (not PRE11) on your old computer (you are permitted two installations) and during installation agree to upgrade your old catalog. You can then use backup and restore if you have an external hard drive. The back up from the PSE11 organizer on your old machine will make a physical copy of all the image files and the catalog (your tags and collections etc) although I’m not sure whether collections get converted to albums. When the back up is completed you launch the PSE11 Organizer on the new PC and  start the restore process.
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
    (2) If you are only interested in preserving your tags, you could select all the thumbnails in the PSE5 Organizer (Ctrl+A) and from the File menu choose:
    Write Tag and Properties Info to Photos
    Wait until PSE5 completes writing the metadata and then copy all your pictures folders to your new PC. Then use File >> Get Photos & Videos >> From Files & Folders and agree to import all suggested key words etc.

  • The same photos are transferring from iphone 3gs to computer with every sync

    I have a bunch of photos & videos that transfer to my computer with every sync. How can I get only the new photos to sync?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Cannot charge iPhone via non-computer USB

    My iPhone charges fine when plugged into a computer or when the cable is plugged into the AC brick that came with the phone. However, I have a few other power sources with USB jacks that the iPhone seems to not charge on. A 30 GB iPod does charge on these devices.
    One example is a Xantrex Xpower Powersource Mobile Mini. It's one of those pocket size things with a Li battery inside that can be charged by AC or DC (car). It has a USB port that then provides 5V for charging cell phones, etc. The device works: it charges a 30 GB iPod and RAZR phone with no problems. When I plug in the iPhone, the iPhone does not show the charging battery.
    Is this known behavior? Does the iPhone expect the data lines on a USB port to be "official"? The spec shows pull up/down resistors on both. The AC brick from Apple might include these to keep its port in spec????
    Anyone having similar issues?
    TIA

    Thanks for the reply, even if it is less than encouraging.
    We do use an inverter in the car sometimes, and I have another semi-portable power source with a built-in inverter that we use the AC brick. However, the Mobile Mini (similar in intent to Griffin TuneJuice sold in Apple's on-line store) is for extended power on airplanes, trains, buses, etc., where there may not be a power source and where the device is especially useful for passing time.
    Question: does iPod touch has similar behavior?

  • I cannot retrieve voicemail messages on my iphone having installed the new ios7 software. This is extremely annoying and very bad news as I also use my phone for business. I wish I had not upgraded to ios7. Please assist if you can, many thanks

    Can anyone assist. I've downloaded the new ios 7 software for my iphone 4s phone. Ever since doing so I often cannot access
    messages via voicemail. It is infuriating & potentially very costly as I sometimes take business calls on the phone. Can anyone
    help as Apple expect you to pay $20 for assistance which is outrageous as it is, I assume, a glitch with their new software as all was
    working fine previosly with the old operating system on the same phone. When I try to click on specific message I get a grey transparent
    screen shading top & bottom of the visual display. The message refuses to play. When you click the grey shaded area it disappears but this makes no difference as the message still won't play. What a mess! Please if you can assist if you know what this problem is and how to resolve it
    Many thanks

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings

Maybe you are looking for

  • Error while loading Data in HFM application through ODI

    Hello All, I am performing a integration from source(Flat file) to HFM application I have created a Integration to it and while loading the data i get the following error:- org.apache.bsf.BSFException: exception from Jython: Traceback (most recent ca

  • Vendor Balance / address - tables

    Not sure this is the right forum or the right solution though would quite like to generate a report that gives vendor address detail Name 1 etc and account balance, then using mail merge intend to sending letters to those with top 20 recievable balan

  • Email 'From' address in Mail

    In OSX Mail.app, you can now select 'Custom' from the pop-up menu for Aliases and enter whatever you want, even if they're not Apple addresses. But, how can one do this in iOS? All I can see in iOS Settings for an iCloud type account is the list of a

  • Substitute of alpha conversion routine

    Hi, Is there any routine as a substitute for the alpha conversion routine. I am getting problem in alpha conversion and the info object is filled by routine to infocube. I cannot overcome the problem by checking in the transfer rule. Please provide s

  • Deploying old process in GA

    Hello, I installed GA and I´m trying to deploy my old BPEL processes into the Oracle BPEL GA Server but It gave me an Internal Server Error. Version incorrecta del esquema de base de datos. La version del esquema "2.0.37" de la base de datos no coinc