Charging Macbook Pro while connected to iMac 27"

is it possible to charge Macbook Pro while connected to iMac 27" and what kind of connection or cable i should use ? firewire ? usb ? somthing similer to the 27" Cinema Display.
Kindest Regards

Yes. Use a Mini DisplayPort to Mini DisplayPort cable.
(120600)

Similar Messages

Powering on Macbook Pro While Connected to Cinema Display

Is this possible? Right now I have to power up my Macbook Pro, close it to get into clamshell mode, then connect it to the display. Any way I can just connect it to the monitor then power it on?

{quote}Any way I can just connect it to the monitor then power it on?{quote}
Yes. If you want clamshell mode connect the display, hit the power button, and close the lid. For both displays leave the lid open.

Connecting iMac Keyboard to Macbook Pro while using iMac as external display

I'm trying to using my iMac wireless keyboad for my macbook pro while my iMac is in external display mode but I can't get the keyboad to connect. I've tried disconnecting the wireless keyboard from my iMac but it won't go into target display mode without the keyboad. Can I used my iMac wireless keyboard with my Macbook pro while my iMac is being used as an external display?

No, not reliably. If it's paired with both machines you can turn it off and turn it back on but it's a toss up which machine it will connect with. If you took it to another room so the iMac didn't see it, you'd have to disconnect the minidisplay port/thunderbolt cable and then it would exit target mode display.

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

What adapter do I need to connect my 2009 Macbook Pro to my 2007 iMac?

What adapter do I need to connect my 2009 Macbook Pro to my 2007 iMac? I get really confused with all of the different cables out there an I want to make sure I get the correct one.
Macbook Pro Model is: Late 2009, 2.26 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, OS X 10.9.4 (13E28)
iMac Model: Late 2007, 2.4GHz Intel Core 2 Duo, 4 GB 667 MHZ DDR2 SDRAM, OS X Mountain Lion (10.8.5)
Thanks!

The 2007 iMac does not support cabled input. see > Target Display Mode: Frequently Asked Questions (FAQ)
Like Niel suggest's, your only option is to use a network based connection like > ScreenRecycler

How Can i connect using Thunderbolt a Macbook Pro with the New iMac

I bought the new Macbook Pro with Thunderbolt and instead of buying a new external monitor, i am thinking that the new iMac with Thunderbolt is a great idea.
Is there a cable to connect the Macbook Pro and use as iMac as external monitor, using Thunderbolt.
thanks

I understood your question perfectly and the answer is absolutely yes. When you change the iMac into target display mode you underlying operating system continues to run all existing applications. For example in my case if I finished editing some video and am about to enter a lengthy render process or something which may draw lots of resources like hand real, I set it to start on the iMac and then switch it to target display mode to use it as a monitor with my MacBook air in the meantime.
Only one small caveat in your case though. Since the target display mode is a feature of OSX (eg the OS interprets the special key stroke and changes the iMac into target display mode) you should make sure Lion server supports the target display mode feature. I don't see a reason why it wouldn't but that's the only thing currently crossing my mind. Keep in mind the compatibilities between ports as noted in my blog. If any of your machines have mini display port and you intend to connect the new iMac in target display mode you will run into issues. In that special scenario, I recommend buying a refurb iMac from 2010 which urtilize the displayport allowing you to use it as a display for all your macs -- those with thunderbolt as well as those with displayport. If you have thunderbolts then definitely go with the thunderbolt iMac.

What connection options do I have in transfer of data from my macbook pro 13" to my iMac

What connection options do I have in transfer of data from my MacBook Pro 13" to my iMac?

If available, use a Firewire cable and put the origin in Target Disk Mode. That's how I rescued all my stuff, all 150GB of it, from my now dead Early '08 MBP to my current one.
With the new crop, I believe you can use the Thunderbolt ports as well.

Wake on Lan works on my MacBook Pro, not on my iMac...

Hello everyone, with all these threads about the problem, I wanted to start a new one to make it clear, with all information you may need in order to help me out.
I've got a MacBook Pro '15 and an iMac 21.5', both are running (clean install) OS X Mountain Lion 10.8.2, both are up to date with the latest updates, both have the same apps, both have the same settings in "system preferences", and of course the same settings in "sharing" options.
My iMac is connected to my 5GHz network from my Time Capsule while my MacBook Pro use the 2.4GHz network.
Before going to bed, I leave both my Macs turned on, after 10min they go to sleep automatically. In the morning I can wake up my MacBook Pro from my iPhone or iPad with a screen sharing app.
The iMac doesn't respond at all. It stays in sleep mode. I can leave my MacBook Pro asleep for a week, it always responds. The iMac responds after a few hours but after 6 or 8 hours it seems to be completely asleep and doesn't respond to anything. If you think it's about the iPhone/iPad's app, when I try to wake the iMac from my MacBook Pro with "Back to my Mac" I have the same results.
I tried to connect my iMac to the 2.4GHz network: same problem.
OF COURSE "WAKE ON LAN" is activated in my system preferences.
I made a reset of the PRAM, the cache and the SMC on my iMac: same problem.
I type sudo periodic daily weekly monthly in the terminal and sudo dscacheutil -flushcache: same problem.
I tried everything I may have found in the forums or on this Support from people having the same issue: same problem.
I even tried to set the iMac with the same sleep mode as my MacBook Pro: same problem.
PLEASE HELP ME!

loïcfernandezcastrillon wrote:
I'm connected with the WiFi of my Time Capsule (bridge mode). I have this configuration since Snow Leopard, and no troubles...
I understand that, but if your router is not an Apple AirPort Base Station then it introduces an element of uncertainty. Apple has implemented many changes related to wireless networking recently.
You are complicating matters by changing networkoversleep:
networkoversleep - this setting affects how OS X networking presents shared network services during system sleep. This setting is not used by all platforms; changing its value is unsupported.
Solving problems like this requires that you simplify your network environment and eliminate its unknowns. Using third party routers and making unsupported changes runs counter to simplification.
The iMac stays connected to the Time Capsule about 6 hours during sleep. Then it dissapears...
The iMac wakes periodically (every few hours) to inform your router of its network presence for Wake on LAN demands. Try changing your router's DHCP lease period to something longer than a few hours. For a home environment, a few days is more appropriate. This may not solve the problem, but it is better than making unsupported changes to your system.

Within the last hour, I noticed that my older MacBook Pro, while I was playing it in iTunes, lost contrast on the screen. I am sorry, but I did not take exact notes on this event. Around the same time, I did do a back up, uploaded software, etc.

Within the last hour, I noticed that my older MacBook Pro, while I was using iTunes, lost contrast on the screen. I am sorry, but I did not take exact notes on this event. Around the same time, I did do a back up, uploaded Apple software, etc.
I'm using two MacPros simultaniously, the old one for iTunes, and the new one for the other things. My new one has no problems, so am wondering if there is an easy way to correct the older MacPro's contrast problems. The computer is over three years old, and I'm wondering also if this failure is an aging sign. (I also have other problems, such as a noisy DVD drive, which is part of the reason I bought a new MacBook Pro.)

Is the older MBP a pre-Unibody model from early 2008? If so, it could be having this problem:
http://support.apple.com/kb/ts2377
If so, you would be entitled to a free repair.
The lost contrast could be considered distorted video.
Do you have an external monitor? If the external shows the same lost contrast, the graphics chip is likely the culprit. If the external is OK, then you probably have an issue with the built in display or possibly with its connections.
You may also want to check in Universal Access to see if the contrast bar is set in its normal position (all the way to the left).
Apple has a special test they can run to diagnose the NVIDIA issue, so if you have access to an Apple Store, make an appointment at the genius bar to have it run.
Good luck!

How do I transfer files/settings from my macbook pro to my new iMac?

My macbook pro's logic board is bad, so it does not power on. Is there any way to still transfer files or settings from the hard drive? An adapter of some sort? Maybe the Apple Store can when I get the iMac?
All I am really concerned about is my iTunes database and my firefox profiles.

Hi landonw
The HD will probably have to be removed from the MacBook Pro and connected to a USB adapter or placed in a dock to get your data off of it. I would take the MacBook Pro along, the folks at the Apple Store should be more than happy to help transfer your data to a new iMac.
{quote:}All I am really concerned about is my iTunes database and my firefox profiles.{quote}
What no BACKUP'
To protect your data in the future, pickup a USB External HD +(for under a $100)+ and use Time Machine.
Dennis

Macbook Pro makes wireless for iMac G3 + wireless receiver

First a situation sketch of my setup:
My Macbook Pro is connected with an ethernet cable to the internet cable modem. The sharing settings is set to share the internet from the ethernet port over airport. The internet shared through Airport is spreading out IP addresses using the 10.0.1.2.
The iMac has a wireless internet receiver (Belkin Wireless G Adapter, Serial: F5D7330) connected to it and working.
Now I wanna know how I can set-up the iMac G3 (Tiger) to receive the signal from the Wireless adapter that it gets from the shared Airport internet signal. It seems that right now the signal is not ported to the iMac G3 as it should be. The Airport is not protected with any password or key, so the Wireless adapter can receive the signal without problem.
The lights on the Wireless adapter are blinking, but the iMac G3 doesn't get any internet signal.
What can be the problem here? I already tried accessing the web-based interface of the adapter, but I can't seem to access it through the iMac.

Then I think the issue is with the Belkin F5D7330. It is a gaming adaptor. Connecting the Wireless G Gaming Adapter adds wireless capability to your Xbox�®, PlayStation�®, or GameCube™
You need an airport card in the iMac. So again. Why don't you simplify your life and get a wireless router? Hardwire the iMac to the router and when you come over you use the wireless.

Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".

Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".

Both are great machines but have rather different purposes...while the graphics are good on the MBP, the iMac graphics would be a major step up. Especially if you want to do heavy duty photo or video work, and heavy game use. If the MBP is getting hot and running the fans hard, that would point you to the iMac with its higher end graphics capability.
The photo and video work would be much easier with the larger screen and higier end graphics and faster cpu.

Using time machine backup from my Macbook pro to my new IMAC 27

Hi just tried to do a system restore of my time machine back up from my macbook pro to my new Imac 27, and the imac won't boot. Can I use a time machine back up to restore all of my data to my new Imac 27? Any help would be great thanks.
Antonio Medina

It sounds like you've overwritten the new computer's installation of OS X with one that is an earlier and incompatible version. You need to erase the new computer's hard drive then reinstall OS X using the original installation discs that came with the new computer. After you complete the installation you will have the opportunity to use Migration Assistant to migrate your Home folder, third-party applications and support files, and network preferences from an external drive, another connected computer, or an attached Time Machine backup drive.
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID, then click on the OK button. Click on the Partition button and wait until the process has completed.
4. After the above process has completed quit DU and return to the installer. Complete your OS X installation.
5. When the installation is completed the computer will restart into the Setup Assistant. When you arrive at the point of setting up an initial admin account DO NOT use the same user (short) name that you have been using on your old system. Choose a temporary name to use such as Test or Temp, for example. At the end of the setup you will have an opportunity to migrate data from your TM backup. You can then migrate the Home folder, applications, network preferences, etc. Just do not do a full system restore, again.
6. When the migration has completed open Accounts preferences. Click on the lock and authenticate. Click on the Account Options button (bottom of the sidebar with account listing.) Change the Automatic Login preferences to use your migrated account. Click on the OK button and restart the computer.
7. Your computer should restart into your old Home folder with all your data. Open Accounts preferences, click on the lock icon and authenticate, select the temporary account you created then click on the Delete [-] button to remove it. Select the last option (immediate removal) and click on the OK button.

WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro. I have tried two separate USB cords. I have updated the firmware. I have tried it on my MacBook, two different Macbook Pro's, and my iMac. All give the

WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro.
The drive is approximately 4 years old. When the drive is plugged in, I can see the data. It appears to be working properly. The only problem is that everyone of my Apple Machines are ejecting it. Several years ago, this drive connected to Mac machines with no problems. I have tried two separate USB cords. I have updated the firmware. I have tried it on my MacBook, two different Macbook Pro's, and my iMac.
All give the same result of random ejection of the drive and the error message of:
Disk Not Ejected Properly
Eject "1TB Passport HD" before disconnecting or turning......
Searching through the web, it seems this is an common/known problem. Does anyone know the solution?
Thanks,

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Macbook pro wont connect to internet using cable, but connects using wifi fine

My macbook pro wont connect to the internet using a cable, but connects using wifi fine. I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?

Can you open a terminal and invoke the following commands:
ping -c 10 localhost
and
ping -c 10 google.com
You should normally get something like:
PING google.com (74.125.224.103): 56 data bytes
64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms

Charging Macbook Pro while connected to iMac 27"

Similar Messages

Maybe you are looking for