Charging Macbook with Macbook Air's power adapter

I have noticed that the power connector on the late 2008 aluminum Macbook accepts the Macbook Air's power adapter's plug. The Macbook Air's power connector also accepts the aluminum Macbook's power adapter's connector. So, can these power adapters be used interchangeably? The output power specifications are a little different. The Macbook Air's power adapter supplies voltage that is a bit lower than the aluminum Macbook's.
The reason I am asking is that if my wife and I both travel with our laptops (she has Macbook Air and I have the new Macbook), it would be nice to be able to bring only one power adapter and use it with both laptops. I have also noticed that the airplane power adapter shipping with the aluminum Macbook (late 2008) is the same one that I bought for my wife's Macbook Air. However, according to Apple, the airline power adapter does not charge the battery, but only powers the laptop.

It is safe to use your macbook power adapter on the macbook air, but not the otherway around. The macbook air power adapter won't supply enough power to the macbook and probably will overheat and eventually burn out (if not worse).
Glor

Similar Messages

  • Can I charge an iPod Classic 3G with the Apple USB power adapter?

    I have just buy an iPod Classic 3G with 15  GB (SN JQ4239GQQQF) from ebay.
    I have read that it's posible to sync it with my PC with Windows 7, but, It is not possible
    to charge it by usb.
    I could charge it with the Apple USB power adapter?
    Thanks

    With that particular model, only the Firewire cable and connection will provide power to the device.  The USB cable is only for syncing.
    Using the iPod Dock Connector to FireWire and USB 2.0 Cable
    Here is the cable you'll need.
    http://www.amazon.com/Apple-Connector-FireWire-Cable-White/dp/B00009KO0B
    And the wall adapter as well.
    http://www.amazon.com/Apple-FireWire-Power-Adapter-White/dp/B0000D8LSW
    B-rock

  • HT4060 iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    iPad will not charge if hooked by USB to pc or plugged into wall.  How do I know if the problem is with iPad, cable or power adapter.  I have a 12, 10 and 5W adapters no success with any.  Only one lightening cable so can't swap cables.

    I'm sorry but this is too funny to pass up. 

  • Hi.i really need to know why some iphone 5 lose wi-fi or bluetooth comminucations after a while?!? i just charged it with my iphone 4's adapter,it can be the reason?!?!?!?!

    Hi.i really need to know why some iphone 5s lose wi-fi or bluetooth comminucations after a while?!? i just charged it with my iphone 4's adapter,it can be the reason?!?!?!?! i dont think so....

    It would help to have more details about when your phone loses wi-fi or bluetooth. 
    When an iPhone locks itself it turns Wi-fi off.  I haven't had any problems with bluetooth turning off.
    You might try restarting the phone. Double tap the home button to open the multitasking drawer, tap and hold on any icon in the drawer until the icons start to jiggle, tap the X that appears on the upper corner of each icon to shut them all down.  Press the Home button to close the drawer.  Then hold the sleep/wake button down and wait for the Slide to Power Off slider appears.  Slide it and wait for the phone to shut down.  Wait a few seconds and then press and hold the  sleep/wake button again until the Apple logo appears and the phone restarts.
    You can also reset your network settings, go to Settings => General => Reset Network Settings.  You will have to reconnect and enter passwords for any wi-fi networks that you normally connect to after you do this.
    Let us know if this doesn't help.

  • HT1476 Can we charge iPod/iPhone by the iPad power adapter?

    Can we charge iPod/iPhone by the iPad power adapter? And does it have any bad effect on the battery ?
    Thank you all

    Texas Mac Man's post about charging iDevices - https://discussions.apple.com/message/18379764

  • Can you macbook pro with a 220 volt power adapter

    Can you macbook pro with a 220 volt power adapter

    The power supply for the MBP will run with any voltage between 110 and 240 so there is no need for a voltage power adapter.
    Allan

  • Can Macbook(2007 late) 60W MagSafe Power Adapter be used for New Macbook Air 13" ?

    I just upgrade my old Macbook (2007 late) to the new Macbook Air 13" (2012 Mid).
    The old Macbook have a 60W Magsafe power adaptor, it's T style.
    I am wondering if this kind of old T style 60W magsafe adaptor can be used on my new Macbook Air which is using magsafe 2, if I just purchace a "magsafe to magsafe 2 converter" on the Apple Store?
    Can anybody share your experience?

    Thanks captfred's reply.
    I go to Apple reseller to get the "Magsafe to Magsafe 2 converter" and test it with my old T-style 60W adaptor.
    So far, my new Macbook Air is still working.
    Hope my experience can help other user.
    BTW, I don't know how to change "This helped me" to "This solved my question".
    So, sorry captfred, I can't add your point.

  • Macbook pro turns on when power adapter is plugged in

    Sometimes my macbook pro (early 2011), turns itself on when i plug the power adapter is plugged in, and the screen is black and unuseable and I have to hold down the power button to turn it off. Then i turn it back on and all is fine.
    It does not happen all the time and I believe it has something to do with my power on schedule (my computer turns itself on at 2:00am and turns off at 7:50am) however it still turns on if the power adapter is plugged in after 8am
    Just wondering if this happens a lot or my hardware is dodgy? (has happened on 10.7, 10.7.1, 10.7.2)
    Tim

    +I always power down my mac mini when not in use and then turn off the surge protector. ... Also this keeps resetting the internal clock.+
    Since you have done this as a habit and it is an older machine, I suspect the "watch battery" inside the Mini that powers the Mini's pram needs to be replaced. These seem to get depleted faster when Minis aren't connected to power full time.

  • Ipad air USB power adapter is not charging

    I had to replace my charger twice within the year of having my ipad air in order to get it charging. The first time it happened I went out and bought a new cable (but kept the same adapter the ipad air came with). About a month or so later my ipad was no longer charging. I went out tonight and bought a new wall charger all together (so using a different adapter) and its now charging. I am not sure if this was an issue with the original power adapter or if there is something more going on. Has anyone else experienced this issue?

    I don't think it's unheard of. Charging issues can be things with the adapter, or with the cable.

  • New iPod touch 5th generation charger won't work with computers or USB power adapter?

    I just got this charger less than two weeks ago and just yesterday it started saying "This cable or accessory is not certified and may not work on this iPod." It will only work on some occasions, but most of the time it won't. Other times it will show that it is charging, but when I select to "Trust" my computer it stops charging. When I plug it into the USB power adapter, it rarely works (even when I try it in different outlets.) Any way to solve this issue?

    If a non-Apple cable and the place will not take it back then:
    USB Power Adapter Takeback Program

  • Can I charge my new ipod using firewire power adapter?

    Just got my new 30GB ipod and realised that it doesn't come with power adapter to plug in directly in power outlet.
    Can I use the firewire power adapter which I have leftover after my 3rd gen ipod died on me?
    Also can I use the firewire to connect it to my powerbook for charging and song transfer? I thought firewire is faster than usb2 then why new ipods don't come with firewire cable anymore?
    Many thanks.
    PowerBook G4   Mac OS X (10.4.5)  

    think if you do your research and read up you will see the USB2 is indeed faster than Firewire. I actually did a few test on a dual G5 using both the Firewire and USB2 and in all my test, USB2 was faster.
    If USB2 was faster for you, that's wonderful. I'm not about to start arguing with you over it.
    What I can tell you is that you're certainly in the minority if this was the case for you.
    USB2 has a theoretical maximum speed of 480Mbps. While this is certainly a higher number than Firewire 400's 400Mbps, Firewire will still vastly outperform USB2 in almost every case. It is near impossible to get anywhere close to 480Mbps with USB2. Even under ideal conditions, USB2 still has to contend with other processes on the machine, and other devices in the bus.
    This is the nature of USB's design.
    It is not uncommon for Firewire to reach near maximum speeds consistently. This has been proven time and time again.
    Like I mentioned already, if USB2 is faster for you... go ahead and use it. I'm not going to tell you otherwise.
    I'm quite sure I've done sufficient research on this, as well as many other people in this industry, and these forums. Perhaps it is you that might want to do a little more reading.

  • Charging iPad with Airport Express extension power cable?

    I have the discontinued Monster Airport Express Stereo Connection Kit, it comes with 3 cables, one of which is an Airport Express extension power cable, I want to know if I can use this power cable to charge my new iPad. I have asked Apple staff who didn't know as they no longer stock the cables. The power cord has a UK wall plug on one end and a 2 pin connector on the other,made to slot into the airport express unit it the same fashion as the iPad power cable slots into the iPad power block. I understand the iPad needs 10w power charging. Does anybody know if this will be safe to use? Many thanks...

    Use the power adapter/cable that came with the iPad.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • Can I used my New MBP13' with a 85W MagSafe Power Adapter

    I just bought a new MBP 13' with MagSafe 60W. Can I used my old Charger 85W(My old MBP Mid 2008 85W MagSafe Power Adapter) It does work, but what will happen to the battery? will it ruin the battery life? will it overcharged?

    No it won't do any harm
    (It will just draw what's required and then shut off as normal)

  • Will iPod Shuffle 2nd Gen work with 1st Gen USB Power Adapter?

    Hi.
    I have the iPod USB Power Adapter (M9837ZM/A) and was wondering if it will also work with the iPod shuffle 2nd Gen?
    Mine only lists the original shuffle (naturally) and I just realized that Apple apparently re-designed the USB Power Adapter (MB051LL/A), which does list the 2nd Gen shuffle (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=E82 45892&nplm=MB051LL/A).
    Does anyone know if I can use my power adapter with my new 2nd Gen shuffle?
    Thanks!

    Will I be still pleasantly surprised when my iPod is fried?
    So, what you're saying is, that whatever happens, it cannot do harm to the iPod?
    If that's so, i'll give it a try.

  • Hissing sound with wi-fi and power adapter connected

    This is quite annoying - when the power adapter is connected and I have a w-fi connection to the internet I get intermittent 'hissing' sounds - however when I remove the lead and run off the battery this no longer happens. Does this happen to anyone else?!

    What problem are you having ?
    If you have the 'this iPad hasn't been backed up' message on screen and you can't remove it try a soft-resetave you tried a reset ? : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    When the iPad has restarted you can then force a backup via Settings > iCloud > Storage & Backup > Back Up Now

Maybe you are looking for

  • Is there a way to add code in SAPLV70A (before going to RSNAST00)?

    Hello, SAP 6.0: I am looking for a way to insert code after processing an output type (before going to RSNAST00). Has somebody an idea? Thanks a lot! Guido Edited by: G. Verbruggen on Mar 12, 2009 5:27 PM

  • How to configure Ou00B4neil printer via Bluetooth

    Hi Experts, I want to configure a hand held device using SAPWebConsole to print from a O´neil printer via bluetooth. It is possible? Regards. Edited by: jorge velasquez on Sep 1, 2010 3:32 PM

  • WD Runtime exception: while using webservices!

    Hi all I am facing a wd runtime exception. using a webservice call from wd on CE 7.1. any clues? java.lang.ClassNotFoundException: Loader /L_local#wd_webserviceejb3 could not load class com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClass than

  • Activation of Function group

    Hi friends, I have created one function group.Now,  i am  trying  to activate it,But It is throwing error message "REPORT/PROGRAM statement missing, or program type is I (INCLUDE)." But when i use Activate anyway ,it activated. Can anyone explain why

  • FAQ for MSI K8T NEO

    Is there a FAQ for the MSI K8T NEO motherboard? About 3 years ago I build a computer using the ABIT KT7Raid Mbd. Although I had the ABIT manuals I found that wasn't enough to guide me thru setting up the board, installing the OS, and downloading all