"Charging not supported with this accessory" when it's plugged into my Mac?

I'm starting to get extremely upset with my iPod touch 2nd Generation 64GB. I've had it just over a month now and every time I plug it into my Macbook it will charge for a few minutes, and then if I move the iPod for any reason it says "Charging is not supported with this accessory" and stops charging. My Macbook is always plugged into its charger so there shouldn't be an issue with that. I've tried the charging cord that came with the iPod, and several other charging cords from previous iPods, but still I get the same result. Could it be that the USB ports on my Macbook are going bad? I've had it since 2006 so I don't know what to do.

Checked, nothing there, didn't resolve the issue. Bought a new USB connector and haven't had the problem since. Apparently the ones I had, even the one that came with the iPod all went bad somehow. Thanks though!

Similar Messages

  • HT1476 when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it

    when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it

    If you did not do a reset of your iPod please try that (you will not lose any data)
    Reset iPod touch:  Press and hold the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If this does not work inspect the opening in your iPod where the cable connects. Look for any debris and clean it (a magnifying glass may be required).

  • On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

    on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

    Clean the iPhone charging port with a clean dry toothbrush.

  • HT4060 ' charging not supported with this accessory' and Not Charging at all

    Help and advice please.
    I am having problems getting the new IPad to charge at all and sometime it displays this message.
    ' charging not supported with this accessory'. This message is appearing occasionally on my 5 week old new iPad (3) within a few minutes of plugging it in.  :(    It is also not charging after this message appears. I am using the supplied wall socket and cable. I am also having problems getting the iPad to charge at all even if the message does not show. This is frustrating me no end. I expected a reliable device given the amount I paid.
    I am so disappointed, frustrated and feeling some what angry.
    I rang Apple support today (twice) and it made a liar of me working just fine for few minutes the first time then again failed, then for  hour or so after the second call seemed to work just fine. Now it is not charging, and won't charge despite repeatedly unplugging and repluging, Switching off the iPad and turning it back on etc etc.
    I am not happy at all!

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Charging not supported with this accessory shows up on my iPad. The cable seems to be broken at the connector. Could it be that I need a new USB cable?

    Charging not supported with this accessory shows up on my iPad. The cable seems broken at the connector. Could it be that I need a new USB cable?

    Yes, but should be covered under the warranty of your device (or any device under warranty using that cable) just bring it into the store.

  • Charging not supported with this accessory. Multiple cables...please help

    A couple weeks ago I started occasionally getting a "Charging is not supported with this accessory" error when my phone was plugged in to my wall, and car charger. Then, it would randomly start popping up when it wasn't even plugged in to anything... it got worse and now it won't even charge. It just pops on and off like I'm plugging and unplugging the cable. So I decided to restore the iphone and update again, to wipe everything off. During the restore it got to clear the software, but every time before it can finish installing everything back the iphone comes "unplugged" and now I can't even use the phone because it's stuck in recovery mode and just says to plug it into itunes. I've tried 3 different cables, and tried doing this about 6 times now. Please help, I'm at a loss... I even cleaned the port where it connects and everything. It's an iphone 4 with ATT, and I've had it for about a year...

    I tried that earlier today
    I just cleaned it again for about an hour with the toothbrush. It got almost all the way done restoring and then said an unknown error occured and the iphone shut back off. Sigh

  • HT2188 Iphone won't charge, charging not supported with this accessory

    I havent updated my phone to the latest software yet, so need to do it, this may help the issue of it not charging, i dont think the battery is dead because it was working but saying CHARGING IS NOT SUPPORTED WITH THIS ACCESSORY even when i tried the mains charger, car charger and from a pc however I cant do this because my phones battery has now died...anyone help ?

    Use the original cable and charger that came with your iPhone, and plug it into a wall socket for several hours.

  • What does charging not supported with this accessory mean?

    So whenever I try to charge my iPod 4g with ios 6.1.3 it always says that charging is not supported with this accessory
    What does it mean?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Mophie charging not supported with this accessory

    Error on my Mophie Helium states: Charging I not supported with this accessory.
    I have had it replaced 3 times. Same issue. Just got. New one yesterday. Same hen I woke up. Using the cable they sent. Using the outlet that came with my iPhone 5. No change. I tried with a blackberry wall outlet and its he same.
    I have one last test. The ac adapter that came with my new iPad. If that works great. But. It should be supplied by Mophie. Either way I will have to call them.
    So far my iPad charger is working great. What the heck?
    Tips other than what I found out?
    ThanX!
    Kevin
    :apple:

    I tested it, the ac adapter that came with my new iPad works great. The error never came up again. It should be supplied by Mophie. Either way I will have to call them. But that is THE answer. I have had 5 replacements. All are the same. My wife has the Air and it never has had this issue.
    Kevin

  • 'Charging not supported with this accessory' on my iPod touch

    So I have an iPod touch 4th gen. 8GB. About 4 months ago I dropped it in a small amount of water by accident. I immediately put it into rice and let it dry of for a while before using it. (24 hours.) After that it worked fine, no problems. My dog chewed up the original charging cord so I went and bought a new one. Nothing was wrong until a few days ago. Suddenly when I try to charge my iPod I'm getting the 'charging isn't supported with this accessory' message. At first it only happened if the charger wasn't in perfectly, but now I get it every time I try to charge my iPod. It plugs in and charges for a bit, with the lightning bolt symbol, and then I switches to the full battery symbol and then the message pops up. I have to hold the cord at weird angles to get it to work, and if it's moved at all it tweaks out. I would really appreciate some help. Is it the cord or the iPod? I don't have enough money to throw at a bunch of solutions, so a serious answer would be great. Thanks!

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • "Charging not supported with this accessory"

    I am a long-time Apple user, and feel like I know my way around the basics. I'm afraid I have a confusing/frustrating issue and don't seem to be alone. I have a third generation iPod touch. It's about 18 months old, and does not see heavy use. It used to connect, and charge, without any problem to a Logitech Pure-Fi Elite speaker system, an FM transmitter/charger I use in my car, and a couple of portable chargers with USB ports that I use for traveling in addition to my laptop. I recently acquired a new MacBook Pro running 10.6.8. To stop the constant iTunes upgrade requests, I went ahead and ran the update. Since then, I get the "Charging not supported..." sign, with every device, though I finally got it to connect to my laptop yesterday. It will no longer accept a charge through the Logitech system, and in fact stops sending music signals after half a song when docked, and will not play through the auxiliary output at all, though it will still play through headphones, at least the scrap that I did try in my attempt to troubleshoot it. It will not charge through the car system any longer. Either there is a terrible coincidence of software upgrade and hardware failure, or somehow the software is screwing up the processes that worked fine before. I have to say, Apple upgrades often seem like more trouble than they are worth. There is always something lost when these 'improvements' are made. I am not happy.

    I almost have exactly the same problem with the same iTouch generation/age.  But charging with normal Apple charging cables.  Would love an answer to this!  Thanks!

  • Charging Not Supported with this Accessory - 3GS

    Here's the break down.
    iPhone 3GS has no lint or dirt in the connector - Cleaned it anyways
    no water damage and software is up to date ( I dont leave it anywhere stupid so plz refrain from the obvious answers of maybe it has moisture damage)
    upgraded it to iOS4.1 and BOOM!! no longer recognizes any chargers....and I mean ANY. I went to Best Buy and tried every charger I could get my hands on, bought an Apple Brand iPhone 3G Dock and USB 2.0 Cable guess what? Nothing. Now the phone is dead from not being able to charge and this whole time it would not be recognized by any computer with any cable anywhere.
    I use a laptop so its not an issue of which USB's I use, I have always use the chords that came with the Phone, and for the last time this is not a hardware issue. I left it plugged into the dock for 18+ Hours and got nothing.
    I have read online and numerous places that this is an issue regarding the 3GS models and the new iOS, and many people have solved it with hard resets and what else. None of these worked for me.

    I've not seen this on any iphone I've updated to iOS 4.1 & I've updated quite a few, including numerous 3GS's. I suspect your OS is corrupted. Restoring as a "new" device, followed by syncing your itunes content back to your phone is, I suspect, your only option to fix this & rule out a hardware issue. Before doing so, find and delete all .ipsw files on your computer. There should only be one, but delete all that you find. This will force itunes to re-download iOS 4.1. I would not try restoring from backup first, as I suspect this will merely restore the problem. Your profile doesn't say what OS you're using on your computer, but the .ipsw file is located here. You will most likely have to turn on show all hidden files & folders to see it:
    Mac OS X
    ~/Library/iTunes/iPhone Software Updates
    Windows XP
    C:\Documents and Settings[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
    Windows 7 and Vista
    C:\Users[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates

  • 3GS showing    When charging. Shows message  charging not supported with this accessory

    I have noticed this message appears after software update.  I used an after market charger in my car. When my iPhone 3GS would fall below 20% battery only the car charger would work.  Then it would appear again at 99% charge.   My only solution is use a car charger or connect to computer if falls below 20% or do what I do and make sure never falls below 20%.  The factory charger works fine charging at 20%to 99%.  Not sure but I guess something in the newe software is confused about the messages you get for falling below 20% and being charged fully.   Anything to add or help please. 

    I had the same problem with my 3gs phone after the upgrade too. Took it to apple. All they offered me was a 4G at a discount. They claim this has nothing to do with the upgrade....tons of posts says it does. I bought an android. Not too happy with apple right now!
    Never had a problem with the phone before, in fact I loved it.
    Good luck to you!

  • I keep getting the error message that "charging is not supported with this accessory" when I plug my ipod touch in to my macbook.

    Neither the macbook nor ipod touch are new, and I'm using the cable provided with the ipod touch as normal and so was just hoping someone could explain what might be causing this? thanks!

    Hi,
    Thanks for your suggestions, tried all those but no luck until I tried another cable. Also found another thread on here with a similar complaint that suggested cleaning the cable/ipod connection which I've now done which seems to have done the trick-thanks again!

  • My iPhone says "Charging not supported with this accessory"

    Why wont my phone charge with any chargers? i have to keep plugging and unplugging it just to charge it. plus it doesnt hold charge for as long as it used to, not it only holds charge for about 7 hours. i am not under warranty but can apple replace my iphone 4? but before replacement, what can i do to fix this?

    Clean the docking port of the phone with a soft, dry brush.

Maybe you are looking for

  • Report takes too much time to display information

    Hello, We have Oracle BI EE 10.1.3.3 on the production environment, and now a problem is appearing in the display of a report in the dashboard. I already tuned the sentence that get the data, these are three and take 1 minuto, then the display in the

  • PI 7.31 SP14: use of MessageTransformBean Complex conversion w/o KEY values

    In a mail sender channel I need to pick up a csv file with 2 (different) header lines and a number of data lines. the structure is like this: header1 header2 line line line There are no Key values in the file that I can use and no fixed lengths eithe

  • Can't disconnect URGENT

    Okay, it won't let me disconnect from iTunes saying that a file is in use from another application. But, the only music player I have running is iTunes and yet it won't let me disconnect, does anyone know how to get it off?

  • How to Determine .INDD version?

    Hi,    Can someone give me information on how to determine version number of .INDD file using JScript or C# using SDK? Thanks Vish

  • Eclipse RCP and swing key accelerator

    Hi, I have a JTree inside a view and a popup message when you right click on the tree. I added a key accelerator to the menu and I see the shortcut on the menu but when I use the shortcut, nothing happens. I believe the problem is SWT -> SWING issue