Charging phone via USB removes custom ring/notification tones.

Per phone instructions I put my custom ringtones on my SD card.  Now when I connect my phone to my laptop for charging during the day POOF, all the ringtone/notification tone customizations disappear and the custom tones disappear from all the menus.
An added "feature" of this situation is that toning is altered from the expected.
How does one stop this behavior?

when you plug it in, pull down the notification
press on usb, and set to cahrge only
if you mount the sd for the comp to see your phone wont have access to it

Similar Messages

  • Help needed: blackberry keeps resetting or won't turn on after charging, especially via USB

    This is a bit of an odd one and I'd appreciate any help that others can give me.
    I've had my blackberry 8900 for about a year and a half now. 
    Whenever I charge my handset from an empty battery (e.g. this problem isn't a problem when I charge it if there's still some charge left) - either from the main power charger or via USB, I experience problems.
    Whenever it's fully charged I unplug the charger and normally at this point it cuts out completely. The screen goes black and cuts out - it doesn't even go through the normal switch-off process. From then, it won't turn on for around 3 - 4 minutes (the red light occasionally appears on the top, although it's fully charged).
    When it does turn on, it goes through a soft reset.
    This is more of a problem when I charge it via USB but equally affects charging it from the mains as well.
    Any ideas?

    It's fixable. First, charge it for several hours and then WITH the
    charger still connected, remove the battery a minute and replace, and
    reboot.
    If that does not do it, and it continues in the reboot loop
    1)
    Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2)
    On your PC, go to Start > Run and copy and paste the following line
    exactly (meaning with the quotation marks):
    "c:\program
    files\common files\research in motion\apploader\loader.exe" /nojvm
    3)
    The Application Loader Wizard will appear -- click "Next."
    4) In
    the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN".
    Click the "Next" button.
    5) You should then see a list of
    applications ready to be installed for your Blackberry. Hit Next and
    Finish and you are well on your way to getting your Blackberry back to
    life. Just don't disconnect anything and let the lengthy process finish
    completely.
    NOTE: If you do not see a list of applications
    mentioned in step 5 and instead see the message "The Blackberry Desktop
    Software does not have Blackberry Device Software for the device that
    you have connected to the computer. Contact your wireless service
    provider or system administrator," then you must download Blackberry's
    Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just
    select the appropriate carrier and network type, select your Blackberry
    model from the list and download the latest version. Install this
    download and follow the above steps again and you should be on the right
    path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Charge & Sync via USB?

    Anyone had any success charging AND syncing the phone via the same USB connection? I find it ridiculous that the USB adapter covers the pins required to power the phone yet doesn't seem to charge the phone at all...
    The desktop "charging" station seems to have the same problem.
    I have the phone plugged into a Powered USB Hub (ie. hub is plugged into wall so should have plenty of power to pass onto devices) if that makes any difference.

    I have the sony ericsson s710a. I bough the dcu-11. However, I was also unsuccessfull to charge and sync via this USB.
    I remember seeing a sony ericcsson connected via USB at one of the apple stores. I don't know if it charges but I syn the phone via USB. At that time I was interested in this whole thing so I didn't pay to much attention, so I don't remember how that phone was setup.
    If anyone knows how to do this, please help. Thank you.

  • I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

    I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

    We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Why won't my IMAC recognize my new smart phone via USB?

    Why won't my imac recognize my new smart phone via USB?

    Have no clue since you provided no details.  What did the smart phone tech support tell you?  You contacted them right?

  • How to charge Z1 via USB to PC?

    How to charge Z1 via USB to PC?
    Thanks people

    Its got to do with the charging power. The original charger for the Z1 outputs 1.5Amps, most lower end car chargers barely output 0.5Amps which is the lowest power rating for USB charging. The ports on yours computer give out 0.5Amps that's why it takes for ever to charge a Z1 through a computer. Even though they all out out the same 5 Volts, the Ampere is different. Try to find a car charger that gives out 1.5Amps and you will be fine

  • How to connect android phone via usb using mavericks?

    I am fairly new to Macs and want to transfer music files from my PowerBook to my LG Android phone via a USB connection.  Any suggestions on how to accomplish this?  Thanks in advance for any help.

    I do not have the equipment to try this setup first hand, however, it could be possible to set this up. It appears that the phone and Operating System has the means to print pre-installed. You will need a proper OTG cable also.
    Ensure that under Settings> Printing that the HP Plug in is installed and turn on. If you do not have it, it can be found in the PlayStore. HP Print Service Plugin<---
    After that, simply connecting the cable to both phone and printer should allow you the means of printing.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Charging iPhone via USB vs. FireWire

    My iPhone charges fine when plugged into my computer via USB cable. However, it doesn't seem to charge when plugged in using the iPhone-to-Firewire cable. Is there a reason for this or do I have a faulty cable? Thanks for any help.

    Marc Kramer wrote:
    My iPhone charges fine when plugged into my computer via USB cable. However, it doesn't seem to charge when plugged in using the iPhone-to-Firewire cable. Is there a reason for this or do I have a faulty cable? Thanks for any help.
    The iPhone has different power requirements for changing that Firewire does not use.

  • How Can I Charge My Cel Phone Via USB Cable?

    Hi Dear Users
    I'm wondering if you can tell me how I can use the USB cable to charge my mobile ?
    I appreciate your time and response
    Regards
    Reza

    Lost in translation! Existing, supplied USB cable of the phone, not by use of USB.
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • When I charge my phone via usb or ac adapter, it wont charge.

    However the charging icon is shown. It still connects to iTunes and everything, I have tried 3 different cords. It charges super slowly on my iHome station ( 2% in one hour) How can I fix this?!

    Please make a Genius Appointment and take it in for service.

  • My Windows PC doesn't detect my phone via USB

    Hi.  
    When I plug in my USB cord, I expect my PC to detect my phone.  Device Manager reports my phone as an "MTP USB Device."  Any advice on how I can get my PC to recognize my phone as a phone so I can access my information?  Thanks.

    Hi.  
    When I plug in my USB cord, I expect my PC to detect my phone.  Device Manager reports my phone as an "MTP USB Device."  Any advice on how I can get my PC to recognize my phone as a phone so I can access my information?  Thanks.
    Try removing that driver and reconnecting the phone.

  • Unable to charge G2 via USB?

    Plugged in my G2 overnight Saturday night when it was down to about 25%, woke up on Sunday morning to see it hovering at around 80/81% and discharging. After looking at the battery stats, I was able to tell that it charged to over 90% before stopping charging completely and starting to discharge.
    I was using the original cord and power brick when it happened, if that makes any difference.
    I have confirmed that the issue is not any of the specific chargers that I have around (either the cords or the brick, and have used both the OEM one as well as others) - and I have booted into Safe Mode to see if that would solve the problem - it did not.
    Luckily, I was able to get a wireless Qi charger from a friend as that is the only way that my phone will (very slowly) charge.
    Help!

    You can install the cable driver manually by using the following steps:
    1. Connect Cable to USB
    2a. If PC sees cable it will ask for you to supply a driver, browse the disc and select the XP driver from drivers folder and there you go.
    2b. If PC does not see the cable it may be found in the Device Manager as Other or USB Device. (device manager can be found by pressing Windows Key and Pause together) or go in through Control Panel.
    3. Highlight Other or USB Device and right click and go into Properties.
    4. Select Update Driver and do as 2a.
    Hope this works
    Gadget
    Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

  • Charging iPod via USB

    I have my video iPod and its USB adapter for charging it on a computer. My computer with all my music on it is getting repaired. If I hook up my iPod to another computer it gives me the red circle with a line through it and says "Do Not Disconnect." I've already quickly clicked Safely Remove Hardare and unplugged.
    Can I charge my iPod on a computer w/o iTunes and keep my old music?
    What about with a computer WITH iTunes... Can I stop it from dumping my music and uploading the music on that computer?

    Yes, you can charge it on a computer that doesn't have iTunes.
    If the computer does have iTunes, you may see this message when you first connect it.
    Click 'no' or 'cancel', then safely eject the iPod, leave it connected and the iPod will charge.

  • Charging phone using USB ports while in sleep

    Hey guys!
    I recently updated my macbook pro mid 2011 to the new operating system: MAVERICKS
    I used to do this little handy thing, where i used my mac as a powerbank for my phone once it was empty. I would insert a micro usb cable in one of the usb ports, and it would be active and thus charge my phone....
    It worked before, but in mavericks it's gone!
    Now it seems like in mavericks the usb-ports aren't powered during sleepmode anymore... how do i change this back?
    Thanks in advance!

    I run Mavericks, my USB ports charge my iPad and / or iPhone while asleep. The behaviour has not changed.

  • IPod touch AND iPod classic not detected by Windows 7 or iTunes, but both are charging fine via USB.

    I already tried uninstalling and reinstalling all the Apple software on my computer but that didn't help whatsoever.  Both devices are fully charged, and I have tried different cables and USB ports, but to no avail.  When I check for the driver software in my Device Manager (in various categories, but most importantly, the Universal Serial Bus controllers), it doesn't appear, so I figure that might be the basis of the problem.  Is there somewhere that I can download the driver since it's not automatically installing when I plug in the iPods?

    Do the USB ports work for for other devices?

Maybe you are looking for