Charging problem on iPod touch 4th generation after updating to iOS 5.1.1

I updated my iOS to 5.1.1 yesterday when I synced some new music onto my iPod touch 4th gen. It worked fine, and charged fine yesterda after the update. I had it plugged in charging until I left, I used it and it die over night. When I went to charge it, it kept coming up with "Charging is not supported with this acsessory" wether it was in the wall, or plugged into my computer. As most windows users will know, when you plug yout iPod into the USb port of the computer it comes up with the Scanner and Camera wizzard. I generally close this, but with my curiosity, I let it stay open (without running the wizzard) and now my iPod is charging from ym computer, as long as this is open. Why does the scanner and camera wizzard need to be open for it to charge? Is there a fix for this? I've seen symillar problems on other iOS devices after upgradign to 5.1.1, so could this problem be because of the iOS update?
Thanks in advance, Alex "Twitch" Brent

-Try another cable.
- Look at the dock connector on the iPod look for foreign materia and abnormalities.
- The nort charging topic of
iPod touch: Hardware troubleshooting
Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod

Similar Messages

  • Can't sync iPod Touch 4th Gen after updating to IOS 6.0

    I've updated my 64GB iPod Touch 4th Gen to IOS 6.0, but now I can’t sync it with iTunes.
    It connects OK, but iTunes isn’t detecting what is already there - it thinks it is full of 48MB of “Other” (rather than music, apps, photos, etc.). In other words iTunes isn’t detecting what is already on the iPod properly (it just knows it’s nearly full of something).
    So if I try to sync, iTunes thinks it needs to add all my music, etc. again, and therefore says it’s way over capacity (i.e. 48MB of “other” + 48 MB of all my music, etc.).
    Help! Any suggestions?

    - Try resetting the car system if you can.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

  • IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

    It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

    - Try resetting the car system if you can.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

  • HT3215 Can I charge my apple Ipod touch 4th generation through the headphone jack

    Can I charge my apple Ipod touch 4th generation through the headphone jack

    Stedman1 is right, can not be done. What made you think you could? Just curious.

  • I updated my iPod touch 4th generation from the latest iOS 4 update (i think maybe iOS 4.3.5 or something like that) to iOS 5.1.1 and my Photos, Videos, contacts, music, App data, etc. was deleted. How can I all the data back?

    I updated my iPod touch 4th generation from the latest iOS 4 update (i think maybe iOS 4.3.5 or something like that) to iOS 5.1.1. I updated to iOS 5.1.1 on a Windows XP Home Edition with the Service Pack 3 installed on the Windows XP (which I believe is the latest version). After updating, I unplugged my iPod from the computer. I saw that all my photos and videos were on my iPod, but there were no apps. A window popped up and told me to enter a passcode for my iPod. I entered a passcode. I then locked my iPod and entered what I thought to be the correct passcode, but my iPod remained unlocked. Desperate, I tried many passcodes with failure. After a while, my iPod became disabled for a long time. I decided to reset my iPod. After I reseted it, I chose to reset from my earlier back up. After reseting, my computer loaded on all my apps. But, when I started using my iPod, I realized all my photos, videos, music, app data (like game saves and high scores), etc. were gone! I have no idea what to do and I am very stressed about this! SOMEONE PLEASE HELP ME GET ALL MY STUFF BACK!!!!!!

    Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
    When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
    Therefore, remembe the passcode that you enter this time.
    It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

  • When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?

    When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?

    No Siri on 4G Footnote 2 of
    Apple - iOS 6 - iPhone, iPad, and iPod touch get 200+ new features.
    says:
    Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access.

  • Error after Ipod Touch 4th Generation iOS6 Update

    I went to update my Ipod Touch 4th Generation to the new software, and when it finished, it was put in Recovery Mode.
    I plugged it into itunes like it says.
    Then I tried restoring it like it suggests, but as it was restoring, there was an unknown error message (3194).
    My ipod is only a couple months old. I do not know how to fix this. The update ruined my ipod touch!

    3194-How do I reset the hosts file back to the default?
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • Facetime wont work on my ipod touch 4th gen. cant update to ios 7? what can i do?

    Cant get my facetime to work. I have an ipod Touch, 4th generation with ios 6. Theres no update for ios 7 as it needs bigger memory. Anybody managed to solve this problem?? HELP ME PLEASE!

    Not knowing what happens when yo try to use FT, try:
    iOS: Troubleshooting FaceTime                  

  • Unable to connect my ipod touch to itunes after updating to ios 5

    After i have finish updating my ipod touch 4th generation, to ios5 , my ipod was unable to connect to the itunes and all the apps and song are all missing from my ipod touch
    when i open my itunes it also say iTunes could not connect to this iphone because an unknown error occured (0xE8000065)
    Please help me thank you

    See this Apple support document related to your issue.
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC
    B-rock

  • Does iPod touch 4th gen. have update with iOS 7?

    does iPod touch 4th gen. (old one like i bought mine in 2010 or 2011) have update with iOS 7? or is there any way to change from iOS 6 to iOS 7?
    or is it just iOS 6 only for iPod touch 4th generation.

    No iOS 7 for the 4th Gen...
    See the very end of this link for Compatible Devices and Features...
    http://www.apple.com/ios/ios7/features/

  • My iPod Touch 4th Generation finished updating and now it won't turn on. the charge finishes, and when plugged in, it goes to a blue then white screen. and i cant do anything. also wont connect to iTunes. pls help

    hi. my ipod touch i guess finished updating. and now when it trys to turn on, a blue screen comes up and then the blue screen changes to a white one. and i cant do anything to it. also it own connect to itunes. help pls

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    Some other users have had the same problem

  • HT4623 I have an iPod touch 4th generation can I get ios 7?

    I have an iPod 4th generation can I get ios 7?

    No. As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

  • Windows 7 doesn't recognize my iPod Touch 4th generation after I upgraded the device to iOS 5.

    Has anyone had any success with syncing a 4th generation iPod Touch in Windows 7 64-bit after upgrading the iPod Touch to iOS 5? Up until I upgraded the device's OS I couldn't for the life of me stop iTunes from popping up and trying to sync anytime I simply wanted to charge the iPod, but now after the upgrade I keep getting a system message that the device isn't recognized. Any ideas...?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Ik zit met een probleem, hoe komt het dat mijn ipod touch 4th generation de update van Itunes niet kan voltooien? Elke keer als het nog 1 minuut te downloaden is zegt Itunes dat ik de internetverbinding heb verbroken maar dit is geen waar.

    Lees volledig de vraag hierboven. Gelieve een antwoord te posten.

    hello Mike,
    after a lot of trying and contacting the Apple support in the netherlands...... it is recognized by iTunes and iPod updater. it look like it works but it is not possible to disconnect the iPod. I'll tryed the hard way, and have the next problem; the display of my iPod sign up with the Apple-logo and map-attention, the hard disc is working and
    it is not possible to reset the iPod. also read and tryed the the next issue
    Mitch 751, "Please read before you send your iPod to repairing", 10:59pm Aug 23, 2005 CDT
    and now ????
    Martin

  • I just got a new iPod touch 4th generation and the latest iOS update (4.3.3) isnt installing

    It says the software version is 4.2.1 amd that it's downloaded the iOS 4.3.3 version, but when I hit the update button it does the "extracting" bit and then when it gets to the "verifying update with Apple" it says
    The iPod "Tanuj's iPod" could not be updated. An unknown error occured (3194)
    I looked up that error and it said that that meant that my iTunes wasnt up to date. I checked, but it actually was up to date, but I re-installed the whole thing just to be sure, but it's still not updating.

    Yep, it say iTunes 10.3.1.55
    I tried searching for 3194, and someone pointed to http://support.apple.com/kb/TS3694#error3194 and that says:
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    I'm sure I have the latest version of iTunes, but what's an updater log?

Maybe you are looking for

  • Remote Desktop Connection to VM does not work after sysprep

    Hello altogether. Often asked, but never answered with an applicable solution! What shall we do if we get no access to a Azure VM via Remote Desktop Connection? Everything went well: access to the VM via RDC was working perfectly! Then the idea came

  • Creating 16:9 sequence using standard dv

    I am looking to put two clips captured in standard dv side by side on a widescreen using FCP

  • Can't figure out how to create a Slideshow

    I've read the online Help instructions. Read the Apple Support instructions and I just don't understand them. I'm new to iDVD and that's probably the problem. Can anyone send me detailed instructions on how to create a slideshow using my photos in iP

  • ECC 6.0 Clone

    Hi All I have an ECC 6.0 (FI-CAX system ) on AIX 5.3 and Mainframe DB2 . Now I have got a requirement to clone the system to a new hardware (P6). Its a test system to downtime will not be an issue. I am planning to use the same database(shutdown curr

  • Fonts won't show on an xServe running OS X Tiger 10.4.9 server

    When I copy fonts onto the xserve for the clients to access, they wont show up as fonts. they seem to lose their file structure and appear as 0k. However when I copy files from one workstation mac to another on the network, they appear fine. anyone c