Charging problems with 2gb nano

I have two ipod's and my nano will not charge when connected to my computer. It does charge however, when I connect it to my ac adapter but it gives me a weird plug icon on top of the battery icon. The only time I have seen this before is when the battery is fully charged. I know the battery is not fully charged because it only lasts a few hours and then gives me the "ipod is out of battery power" message. Any suggestions?

I had a problem with my nano,it wouldn't turn on so I reset it and held dowm the menu button and it turned on but now the only way it will turn on is if I reset it and hold the menu button down after the apple logo appears but no buttons are broken.Did you find a solution as to why it doesn't turn on after you get the apple logo? It would be appreciated. thx
? Windows ME
? Windows ME
? Windows ME
? Windows ME

Similar Messages

Charging problem in ipod nano

Hi Sir,
I have purchased ipod nano in February month 2011.
I am facing Charging problem in ipod nano. My ipod is getting heated and Charging is not going on. It looks all other function are working fine.
I had some problem in ipod So it was in recovery mode. I have used restore option from iTunes . After that i am facing this issue.
Is there any issue in restore software?
Regards and Thanks,
Anil

You are still under warranty. Just take the iPod to an Apple store or an AASP. Whichever is more convenient for you.

Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

Hannahjadepurnell wrote:
From giffgaff.
i Don't actually mean when you put it In the phone. I mean when you try to take the slot out of the phone with the pin. As soon as I pulled it out it bent.
That makes less sense as the sim tray a fairly stiff metal and should be pulled straight out once released. You didn't answer the question about where is was bought. Is is a real iPhone?

Syncing and Charging Problem with 1st gen iPod nano

I purchased a 1st generation iPod nano via eBay about 3 months ago and have developed an interesting syncing and charging problem. When I plug the nano to my iMac, frequently neither the computer nor iTunes will recognize it. I have done "the five R's" with occasional success. I've tried jiggling the cable in the computer port and sometimes it works in getting iTunes to recognize the nano, sometimes it doesn't. Even when I am able to get iTunes to recognize the nano, I have frequently found that the nano hasn't charged up at all. In fact, a couple of times I found it almost totally drained of power after having been connected to my computer. Yes, I have the most recent version of iTunes installed on my iMac and my iMac, by the way, is relatively new - having been purchased in May of this year. What is interesting is that I've taken my nano to work and it has absolutely no problem charging up on my Dell (yuk!). For the record, I do not have iTunes installed on my work computer and I am not allowed to add any apps to my work computer without the consent of my supervisor. The chances of getting iTunes installed on my Dell at work are pretty much nil. Any suggestions on how I can fix the problem?

I bought a new USB dock connector and hoped, with fingers and toes crossed, that something positive would happen. Sure enough, I was able to sync and recharge my old iPod nano. I guess the original USB dock cable is on its last legs. Not totally broken, but no longer reliable. I consider my problem solved! My thanks to everyone who took the time to read and try to solve my iPod problem. I greatly appreciate it!

Syncing/Charging Problem with iPod Video 5G

I am experiencing a problem with my iPod Video 5G. When pressing the center button of the device, the apple logo appears. But before it completely starts up, it dies, leaving the screen with a faint apple logo and some lines. When I plug the iPod into my PC, a screen is displayed saying "Please Wait, Very Low battery." After a while, it restarts, and fully comes on, displaying the "Do Not Remove" screen. But a message shows up saying "No Battery Power Remains. Connect iPod to Computer". However, the battery meter in the top right hand corner shows a a completely charged battery. Also, it starts to beep. The iPod briefly shows up in iTunes, but then it shuts off, displaying a "very low battery" message again, and an error message comes up in iTunes. This whole process keeps repeating over again. This all came up out of no where, as I had used the iPod a few hours before this started. I have no idea what's wrong with it. Could it be the battery? Or the hard drive? I would appreciate any help greatly.

Go to the video settings (iPod nano) and turn off fit to screen.
Click to download iPod nano (5th generation) - User Guide
Message was edited by: David M Brewer

New Problems with IPod nano - crackle and clicking

Hi,
I got the IPod nano (2GB) a view weeks ago. I haven't changed anything - only copied mp3 songs and photos on it.
Today suddenly during jogging the nano starts to crackle and click - like an old analog tape. This didn't stop any more even after a lot of resets. I have connected my IPod with USB-2 onto my computer and recharged the accu completely. After disconnecting properly the problem is still the same. Also the buttons and the wheel don't work correctly anymore. Has anybody similar experiences? It seems apple has big trouble and problems with this new product. Maybe the IPod nano isn't fully well-engineered jet.
I am looking forward for your help and suggestions.
Thanks in advance!
Your Stephan

Hi Mike,
and what did you do finally?
Did you bring the Ipod back to
your dealer for an exchange?
My IPod didn't get wet during
jogging I have carefully kept an
eye on it.
Is this a general problem with the IPod
or only with some units?
Thanks
Stephan

Two Problems with iPod Nano!

Hi Community!
As I have already written in the topic, I've got two problems with my new iPod Nano:
1) I charged the iPod over USB 2 and my dockingstation already about five hours, but the red sign and the message that I don't have to disconnect my iPod is still there (battery status shows full)
2) With the docked iPod my computer doesn't boot anymore. When I disconnect the iPod it works :-/
THX for helping me!
dynAdZ

Thank you for helping me with my problems, but I still don't know why my iPod gives me this message, altough it is fully charged. And the flashing warning symbol drives me nuts
Mhh I didn't find an image for that symbol... It's a red circle which is crossed. The manual says that there should now be a green symbol, or just the menu...??

Any charging problems with the classic?

I recently bought a new 6th gen nano to use mostly in my car. I have an Alpine deck with the ipod connector cable. Everything works fine except that it wont charge when connected to my car.
So i've done a bit of searching and that seems to be a common problem with the new nano's. People are having trouble charging them with anything other than their computers.
I am going to return the nano and would like to get a classic to try. Has anyone experienced any problems with charging the latest classic on docks, wall chargers, in their cars, etc?
Thanks in advance for any advice.

I recently bought a new 6th gen nano to use mostly in my car. I have an Alpine deck with the ipod connector cable. Everything works fine except that it wont charge when connected to my car.
So i've done a bit of searching and that seems to be a common problem with the new nano's. People are having trouble charging them with anything other than their computers.
I am going to return the nano and would like to get a classic to try. Has anyone experienced any problems with charging the latest classic on docks, wall chargers, in their cars, etc?
Thanks in advance for any advice.

Problem with 2gb Corsair ram on MSI Diamond plus mobo

Ok first of all,the specs:
AMD Athlon 64 X2 4200+ "Manchester"
MSI MS-7100 K8N Diamond Plus, nVidia nForce4 SLI
MSI GeForce NX7900GTX-T2D512E
2048 MB DDR-RAM, 400MHz - (TWINX1024-3200C2PRO) Corsair TwinX CL2
( 4 pieces at 512mb ram)
Plextor PX-755SA/T3K DualLayer / 16x DVD+/-RW
HDD: Maxtor DiamondMax 10 (6V200E0) 200 GB SerialATA-II / 7200rpm
running on win xp prof. sp2
with newest version of mobo bios and drivers.
The thing is, if i stick all the for ram pieces into the pc, it tends to crash down after a while or during the booting with PAGE_FAULT_IN_NONPAGED_AREA as error msg.
but if i take two pieces out and run all with 1 gb no problems occour. This is starting to really annoy me, so i'm hoping someone has the know how to help me out, i'd really appriciate any suggestions or or solutions, i just want to run my system with 2gb of ram

run memtest on the system and tell us if you get any errors. it is probably a bad configuration of the memory timings and voltages. try to get the timings and voltages from the manufacturer's web page and then set up manually in bios.

Charging Problems with Brand New iPhone 4S

My iPhone 4S was finally shipped today and I opened it up and turned it on with no problems. However, when I went to go charge it as it was about 50% battery life using a wall outlet and the given power source with the 4S, the iPhone would not charge. Battery icon in top right hand screen would not show lightning bolt to even show there was a connection. I tried using my USB cable from my iPod Touch and the same scenario occured. My next solution was to use a different outlet, and about 7 outlets later and running around the house the same conclusion occured.
I know theres not a problem with either of the USB cables because when I connect them from my iPhone to my laptop, the phone charges. The phone only charges in outlets when I apply a strong force of the USB cord into the given power source connected to the wall outlet.
Should I just simply bring this wall power source charger back to my Verizon Wireless store or an Apple store for an exchange of chargers or for them to see if If gone mad?

It does sound like you have a bad power adapter. I would take it back to a Verizon store if you ordered it through Verizon or if you ordered it from Apple, take it to your local Apple store.

Problems with iPod Nano 6th Gen Playback & Updating

Hi. I have had a look and can't find another post on this - apologies if I have missed it!
My problems start before I purchased my new Nano 16GB last week.
When the last update of iTunes came available, I was unable to install it. The task bar would get to about 50% (although it varied) and would then time out. When I had this problem I tried everything from every forum imaginable, from deleting all Temp files, disabling the firewall and all start up applications and clearing the registry – everything. Nothing worked. Eventually I decided that I should uninstall, then install the new version.
After a week of the same problems trying to install iTunes, I gave up and downloaded on another computer, and saved the .exe file to a USB stick. This worked until two days after I downloaded it, yet another update came out and I had to start all over again (I didn’t – I am running on 10.1.2.17 still).
I was concerned when I purchased my new Nano that I would have problems connecting it to iTunes as I was not running the new version – but it was okay. Unfortunately, the iPod requires update 1.1 and I am also having the same problem with this – I get time out error 3259 after sometime trying to download it. And yes, I have tried all the same tricks, but nothing seems to work.
I am running Vista on a Dell PC, and connect to the internet on a pre-pay internet USB dongle. I can download updates for other programmes, and other files successfully – it is only iTunes that I am having an issue with. ITunes is added to my list of accepted programmes on my firewall, but I disable that when I am downloading.
Meanwhile! My new iPod is fantastic. Unfortunately I am experiencing an odd problem with it, and cannot seem to find other people with the same issue. The memory is not overloaded (it has 1.10GB of free space on it). I have 1857 tracks on it, and 14 podcasts. I play the music files through the ‘Songs’ menu, on Shuffle mode. For some reason, after playing one or two tracks, it doesn’t seem to want to play the next one. The track will be displayed on the screen, but it does not play. When you look at the song progress bar, it shows that it is part way through the song, but it is not moving. I have tried pressing ‘Pause’ followed by ‘Play’ and nothing happens.
The only way to get it to start playing again is to skip to the next track, but even this has its issues. Sometimes, when you skip forward a track, it plays a completely different track to the one that is displayed. When you look at the progress bar for the song it is showing, it isn’t moving, but music is still coming out!
Does anyone have any idea what the issue is, and how I can get the machine to play continuously without having to handle it several times? Please?!

Hi dianak22!
I have an article here that can help you troubleshoot to resolve this issue:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
You can also walk through the steps of troubleshooting using the troubleshooting assistant, which can be found here:
Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
Thanks for using the Apple Support Communities!
Cheers,
Braden

Charging problem with nokia 603

Hi, I just bought Nokia 603 one week back but i had to give it back to nokia are for charging problem, anyway my point is all nokia hardly had problems with charging but now with nokia 603 it is really strange. Can Nokia please check in to this

Please mention, kind of charging problem.
Even on my 701, charging port given keeps on disconnecting now and then. Maybe because of new fast charger.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Will IPOD 4th generation Charger work with IPOD Nano

Hi
My son has a 4th generation IPOD (20GB) which came with the standard IPOD charger. My wife has just bought an IPOD Nano (4GB). I just want to check whether I can use my son's charger to charge my wife's IPOD Nano. I don't want to risk damaging my wife's IPOD Nano in case the IPOD and IPOD Nano are rated differently and require different chargers.
Thanks
Pentium III 800 Windows XP

Yes, you can use that charger with the Nano.
It will work just fine.

Will a Classic Wall Charger work with the Nano?

I currently have an ancient fourth generation black and white ipod classic.
I have been looking at getting the newer nanos. Will the wall charger that came with the classic work with the nano, or will I have to buy a new one?

Should work. It may not if the old charger is USB and the new iPod requires that the data lines be set to a specific configuration and the old charger doesn't do that (many older iPod chargers only hook up the two power lines and not the two data lines). It will not damage the iPod to try it and see. At worse it will do nothing at all.
Same if the old charger is a Firewire model. It might work, it might not work, it won't damage it to try it.
Cheers,
Patrick

Problem with ipod nano updater

Hi.
I have the other problem with my ipod nano. I reset my software ipod nano, but ipod updater 2006-01-10 write:"iPod Updater 2006-01-10 cannot continue because there are other applications using iPod. Please close all iPod applications andtry again.". But I don´t using other applications, iTunes is closed. I try my iPod update on other computer, but text is same. Can you help me please?
iPod is correct only as external disk. Thank you.

Hi,
I'm on a Mac so things may not work the same. Have you tried restarting your computer? If you do that maybe nothing will be using it at first.
I hope someone who knows Windows will come to help you.
Regards,
Colin R.

Charging problems with 2gb nano

Similar Messages

Maybe you are looking for