Charging related question

Is it ok if I leave my iPhone connected to my Mac all the time and only let it discharge once a month (as recommended by Apple)...I browsed the forum but couldn't find a clear and definite answer to that...
Thx!

http://www.apple.com/batteries/
http://www.apple.com/batteries/iphone.html
Ian

Similar Messages

Any value in the Rapid Charger? and other charge related questions

Ok, I think I have calmed down. I will keep my playbook. But some issues still continue to burn me.   The lastest, the time to recharge off the provided wall-charger.
- So does anyone here have the Rapid charger? Does it really work faster than the wall-charger?
- WIll the playbook charge off a PC USB connection?
- Will the Playbook charge off a standard 9700 or 9800 charger?
thanks
8100, 8900, 9800, and Playbook owner

paulypaul wrote:
- So does anyone here have the Rapid charger? Does it really work faster than the wall-charger?
The provided wall charger works pretty fast for me, I was actually surprised how quick.
- WIll the playbook charge off a PC USB connection?
Yes, slowly. Much slower than the provided charger.
- Will the Playbook charge off a standard 9700 or 9800 charger?
Ditto. Yes, slowly. Much slower than the provided charger.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Ipod Touch 4G simple battery charging related question

If the Ipod touch 4g battery is fully charged and I keep it connected to the PC and use the Ipod (apps and such), will it use the power from the battery and recharge it all the time or will it completely run over external power? Because I want to maximize battery life, and when I want to play a game or such which needs lots of power the battery is usually empty within 2-3 hours. It would be nice for the battery I guess when I keep the Ipod connected to PC and if it would use the power which comes from the USB. Or does it go "through" the battery first? Because that wouldn't be good for the battery life, since Li-po batteries wear out faster when you keep them at high charge. So I'm just wondering what I should do

So when my Ipod is fully charged and connected it will get all the power straight from the USB and the battery will be completely untouched? I've looked through the support but I didn't found anything which says that. Could you please show me some links?

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron

In which Board we need to post cRIO related Questions?

sir,
In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
Solved!
Go to Solution.

Hi illa,
You can post your query under the Real Time Measurement and Control
http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280

Two related questions: ColdFusion 10/Java applications and J2EE supported servers

I have two related questions:
1. CF10 and integration with Java Web applications
We have a couple of Java applications running on JRun and interfacing with CF9 applications. The JRun clusters were created through the JRun Admin and, apart from lack of Axis 2.0 support, have served us well for years now. And, as would be the case, the ColdFusion9/Java/Flash application is a critical public-facing application that the business uses for bidding on projects.
It appears that with ColdFusion 10 on Tomcat, we will not be able to run those Java applications on a Tomcat-CF10 JVM cluster. Is this correct? IF so, what are our options?
2. J2EE Application Servers supported by Adobe for CF10
Which of these is correct?
A. This URL (http://www.adobe.com/products/coldfusion-enterprise/faq.html) states "ColdFusion 10 supports IBM® WebSphere, Oracle® WebLogic, Adobe JRun, Apache Tomcat, and JBoss."
B. This URL (http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1 0/coldfusion10-support-matrix.pdf) states:
"J2EE application servers: WebLogic Server 10.3, 11.1, WebSphere Application Server 7, ND 7 JBoss 5.1, 6.0, 7.1.0"
I *think* "A" above is wrong re. support for Adobe JRun. It does not specify a version of Apache Tomcat unless it is simply referring to the custom version the comes with CF10.
Option "B" above shows no support of Adobe JRun or 'standard' Apache Tomcat.
Thanks,
Scott

Question 1 above was answered: "No support for Java web applications under CF10's custom version of Tomcat"
Question 2: No answer yet: Is Apache Tomcat (NOT Adobe's customized version) supported for CF10 J2EE deployment? I do not see any installation instructions on how to install CF10 on Apache Tomcat 6 or 7.
Is anybody using Apache Tomcat as their J2EE app servers and, again, NOT Adobe's customized/limited version?
Thanks,
Scott

Need to populate 'Order' field for Frieght charges related GL account item

When we are creating Billing Document for outbound deliveries, we need to populate a spcific value (which is fetched from a bespoke table) in the 'Order' field (COBL-AUFNR) corresponding to the Frieght Charges related GL Account item in the accounting document.
Can anyone please suggest which user-exit/badi/bte we can use to implement this enhancement?
I have seen that there are some user-exits with names such as EXIT_SAPLV60B_XXX ('001' to '008') and several others. Please suggest some useful solution.

Hi
U can use the exit 004, 005 and 006.
Max

Deafult search engine on a new tab-this thread was closed but I have a related question. Once you put the new url in, what then? Close? When tried, did not work

"deafult search engine on a new tab" - this thread was closed but I have a related question. [the word “default” is spelled as it on the thread] Once you put the new url in, what then? Close it? When tried, it did not work. The closest answer is noted here. Instructing to go to about:fig. Specifically, I installed the accuweather add=on and it took over my tab home page - the one that comes up when you click for a new tab. I didn't like it so I clicked the button to remove it and the page went blank. I searched to see out to restore the tab page, tired the reply at this page :
http://support.mozilla.org/en-US/questions/753256?s=install+search+box+on+new+tabs&r=3&as=s
But it did not work. Can some on help me? Just want to know how to make google or some page open on a new tab.
Many thanks

Thanks so much for your support. As I said I am not a professional, so I by chance saw a friend who is and this is what he suggested and it worked.
We googled for an answer and found this site: http://www.guidingtech.com/8004/have-new-tab-page-open-specific-website-firefox-chrome/
It says to Download and install Download and install''' NewTabURL''' and gives instructions on how to. Now when I open the tab it goes to my preferred search page!

PM/EAM related questions posted in PLM forum

Hi,
I was going through some of the threads available in PLM forum, but to my surprise, most of the threads posted are related to PM, which should have been posted in EAM forum. It was clearly mentioned by the moderator in one of the sticky thread [PLM-Forumsplit - Please ensure you are using the right forum|PLM-Forumsplit - Please ensure you are using the right forum;
Questions regarding Plant Maintenance (PM) or Customer Service (CS) are discussed in the Enterprise Asset Management (EAM) forum
forums - posts will be moved to the right forum.
Please ensure your are opening a new thread in the right forum
Despite the clear instructions given my the moderator, PM related questions are still posted to PLM forum and some of the active participant of EAM forum answers these questions in PLM forum. It would be nice if those threads are moved to appropriate forum, so that the relevant informations are available under one forum, also, PLM forum should be monitored regularly and inappropriate threads are to be moved to their respective forum.
Few PM related threads posted recently in PLM forum:
[Change PR for External order|Change PR for External order;
[BAPI or Function Module to Complete Maintenance calls in IP10|BAPI or Function Module to Complete Maintenance calls in IP10;
[delete material from PM order|delete material from PM order;
[Message no. IW056 Work center change --> default data redefined|Message no. IW056 Work center change --> default data redefined;
[Component in Task list not reflecting in maintenance order|Component in Task list not reflecting in maintenance order;
[Deleted functional location/equipments|Deleted functional location/equipments;
[PM orders not listing components from material BOM|PM orders not listing components from material BOM;
[Completion date in Maintenance Plans in IP10|Completion date in Maintenance Plans in IP10;
I had used abuse reports for some, but numbers of such posts are many.

I hate to say this, but I often see the same thing, and I've never been able to figure out exactly what triggers selectability vs. non-selectability, but I suspect some of it has to do with tranparency flattening in particular, and possibly text wrap in cases where that comes into play. ID optimizes the PDF it creates, I think, and that might cause text, or even images, to be broken into chunks in funny ways. It occurs to me that turning off optimzing for fast web view might help in this regard.

Please post documentation-related questions or comments on the

Please post documentation-related questions or comments on the Performance Management Applications {forum:id=1318} forum
http://forums.oracle.com/forums/forum.jspa?forumID=1318

I just got a call today that I reached my 300GB limit for the month. I called and got a pretty rude response from the security and data usage department. The guy told me in so many words that if I do not like or agree with the policy that I should feel free to find another service provider.!!! I tried to explain that we watch Netflix and XFinity on-demand alot and I was told that that can not be anywhere close to the data usage. I checked my router and watching a "super HD, dolby 5.1" TV show on Netflix will average about 5-6 GB per hour (1.6MB/s) ... sp this means that I can only watch no more than 1-2 Super HD TV shows a day via Netflix before I run out of my data usage. This seems a bit redicilous doesn't it? Maybe the TV ads about the higher speed than the competition should be accompanied with "as long as you don't use it too often" Not a good experience ...

Where do I post my CRM related questions

Where do I post my CRM related questions.
thanks
siva
Message was edited by:
sivapara

Hi Siva,
You can select the module of CRM from the category and post your question there. You can even search for CRM and Post your question.
Regards,
[email protected]

Online Help Related Questions

Hi
FYI there is no longer a dedicated place on Microsoft.com for online help related questions.
We are told that VS General (here) is the best place for help questions.
Note that these sites are a good place to get help on help (Microsoft and MVP presence):
http://groups.yahoo.com/group/hatt/ -- for WinHelp & HTML Help & general help discussion
http://tech.groups.yahoo.com/group/MSHelpViewer/ -- For HelpViewer help (VS 2010/2012 help; Windows 8 help)
http://tech.groups.yahoo.com/group/MSHelp2/ -- For MS Help 2.x help (VS 2002/2003/2005/2008 help)
Feel free to ask questions on this thread if you need to. At least then we can find your post.
You can also email the VS/MSDN help team directly -- [email protected]
Please let them know how you feel about the lack of support for Online Help in the forums.
Rob
www.helpmvp.com -- Various Help resources
Rob Chandler Help MVP www.helpwareGroup.com | mshcmigrate.helpmvp.com | hv2.helpmvp.com

Actually, we cannot (at least anymore) directly email the team. I tried and got a reject from the mail server. So, I'm going to post here so I can feel better knowing I said something and then I can get back to programming :-)
Ok, I’ve been developing Windows apps since Win 3.1 (yeah, a long time) and have always admired the Microsoft attitude towards Developers and it’s desire to educate and empower R&D.
So, I’m wondering what’s going on? Why am I being asked to have an account to develop anything for MY own PC? Why am I being asked for my Microsoft account password, repeatedly, when I’m just looking up documentation on UserControl or C3 keywords…
repeatedly? This is nothing short of annoying and it gives me pause and concern about the ecosystem. Is the plan to lock down programmer’s capabilities, knowledge and tools?
I’m involved in the TAP program for Windows 10 and have voiced concerns in the same category with regard to installation and deployment of Universal Apps. Security is not a reasonable excuse. Some of us love to program and actually
control their PCs. We are not planning to sell everything we write on the Windows Store. What happened to programming something cool for your home network or just for friends? We need, and used to have, Microsoft’s support in doing
this sort of thing. Documentation and tools are more important now than ever. I’m saddened to see the direction things are heading…
If there is a sane reason I’m being badgered to ‘log in’ to read .NET documentation every hour, please share. If not, please consider lobbying to get things back on track.
Thanks

Button, or other panel related question

so, if any of you have read my previous topic about painting rectangles in a panel, that worked great, but now i need to mkae those rectangles components so that when someone hovers over it or clicks on it it displays information at a certain area. I know how to make listeners and how to add buttons in a panel, BUT how do I add buttons at a specific coordinate. This program graphs data on a specific scale and therefore adding a button in the approximate area using a grid layout will not be good enough. Is there anyway for me to place the the button/component/object at the extact location that I want?
thanks in advance

In future GUI related questions should be posted in the appropriate GUI forum (likely Swing).
so, if any of you have read my previous topic about
painting rectangles in a panel, that worked great,
but now i need to mkae those rectangles components so
that when someone hovers over it or clicks on it it
displays information at a certain area. What?

Charging Battery related question

Does it harm the battery or reduce battery life, to use the AC adapter for extended periods while the battery is fully charged?

Hi,
Please read these articles:
http://www.friedbeef.com/top-15-ways-to-extend-your-laptop-battery-life/
http://www.makeuseof.com/tag/20-ways-to-increase-the-life-of-your-laptops-battery/
http://www.pcworld.com/article/191574/long_live_your_laptop_battery.html
Modern laptops have better batteries, they will stop when fully charged and machines only use AC power. My machines connect to main nearly 100% because they all sit on docking stations at home or at work.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

CRM Related Questions for Configuring Service Desk in Solution Manager

Hi All,
We have 3 requirements while configuring service desk in solution manager:
1) Is there any possibility that we can restrict view of messages in solman for different teams. E.g: Finance Support team should not view message raised for Material Management Team ?
2) Is there any possibility in service desk that we can assign message on the basis of location e.g: message raised for finance from location A should go to different support team of finance and for location B, it should go to different finance team ?
3) Is there any possibility that we can make some question necessary while user is raising very high priority message from satellite system e.g: when we raise Very high priority message on service market place, we need to answer few mandatory questions ?
I tried to search these functionality in standard scenario but I am not able to find something relevant. Please suggest.
Thanks
Sunny

Hi Rama,
I Need to configure the feature to generate a ticket to SAP directly in VERY HIGH priority.
Could you please help me out into this. If you have any doc related to that Please send me.
Thanks in Advance!
Regards,
Prabhat Singh

Charging related question

Similar Messages

Maybe you are looking for