Charging shuffle with usb AC charger
I have come into possession of an AC charger with a USB port. I'm not entirely sure where it came from, or what it's for, but it says on it that it's for ipod use. Can i use it to charge my 2nd gen shuffle? Or is it a chancy proposition?
I have come into possession of an AC charger with
a
USB port. I'm not entirely sure where it came
from,
or what it's for, but it says on it that it's for
ipod use. Can i use it to charge my 2nd gen
shuffle?
Or is it a chancy proposition?
Can't hurt to try it...read output power specs if
legible, it should be 5v, 500mA (or more).
great, thanks.
Similar Messages
-
Using 2G shuffle with speakers while simultaneously charging
I currently listen to my 40GB iPod photo at work through logitech mm50 speakers for 8-10 hours a day. I bought a 2G shuffle to use at work instead, because I've already dropped the big iPod from 30 feet up (I'm a carpenter...was working on a church bell tower...) and decided that my 400 dollar iPod was not worth risking at work any more.
I'm looking for a solution to using the shuffle with my speakers that will also charge the shuffle while in use. I know can plug the shuffle into the mm50 using the headphone jack to the line-in jack on the speakers, but then the shuffle is always running off the internal battery. That'll burn up the battery faster that I would like to.
I make of practice of using it plugged in with the big iPod, and once a week or so running off of batteries to keep the batteries excercised, and would like to do the same with the shuffle. I can see no way to do that. Does anyone know of any kind of adaptor that'll turn the usb cord from the shuffle dock into a full-blown dock connector? I saw that Altec Lansing had a cradle type of thing for using the 1G shuffle in their docking speaker sets. Ideally something like that for the 2G would be great.
Steve
macMini 1.42/512 Mac OS X (10.4.8) my mac history: 512k "e", IIsi, 9500, 9600, TiBook400, iMac G3, macMiniSorry, but no one has come forward with a docking adaptor that breaks out audio for the 2nd Gen Shuffle...
This used to work fine for the 1stGen Shuffle:
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=245852 -
Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version
Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.
-
Help. about the ipod nano charged with usb 1.1
i just got the ipod nano. now i am charging it. according to the mannul, it will take 3hr to charge it by usb 2.0.
considering i only have usb 1.1, so my question is how long it wil take to charge the nano. until i wait for 6hr and the screen still shows do not disconnect. i can transfer the music and image to the nano. thanks.Sorry, I'm not really sure how long the charge will take with USB 1.1, but I'd guess it would be way longer that "twice as long".
The "do not disconnect" will show as the display until you eject the iPod thru iTunes.
Now here the tricky part since I don't have a 1.1 USB. If you eject it thru iTunes, I believe the screen will show if it is still charging or "charged". So when you know you need to charge it, plug in to the `puter, then eject and leave it connected, to see what happens.
I do recommend getting the USB power adapter. For USD30.00, it is really worth it. Well, for me at least. I charge regularly (4 times a week) and only plug into my computer to add more music (maybe once a month). Your usage may be different, but it is so easy to come home and just plug it into the dock (plugged into the wall). -
The phone does not charge when using the wall or the car charger. It charges with USB plug to a PC. This happened after OS4 upgrade. Does anyone have the same issue? Ken
Same here. Any solution?
3G - OS 4 - Windows xp
Message was edited by: Tato_c -
My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.
-
Using AC adapter to charge is better than charge it with USB cable?
I've been reading this on http://www.ipodbatteryfaq.com/
"When possible, always use the AC adapter (or vehicle adapter) for extended charging, not a FireWire cable attached to a computer."
The artical does not explain why, but I'm curious about it.
So, does charging iPod with USB cable really damage the battery?
Is it always better to charge iPod with AC adapter?
Any answer will be appreciated, thanks in advance anywayEven if you use an a/c adaptor you still need the usb cable to connect it to the iPod. The very same cable you use to connect to the computer.
A firewire cable is something completely different, and although the 5th gen iPod will charge via a firewire cable they are not supplied with the iPod (because the iPod won't accept data transfer via firewire).
When reading about the iPod battery, you should remember that there is an awful lot of nonsense said. I've never found any difference whatsoever either charging via a mains adaptor or via a computer. -
Why does my ipod not charge with usb hub in wall outlet?
why does my ipod charge on my computer
not charge with usb hub in wall outlet?Because the hub is not compatible with the iPod.
Just use your computer or purchase a wall charger. -
Get "using too much power" message when charging with USB
I have a 4th gens iPod Touch that appears to have a number of issues:
1. get "using too much power" message when charging with USB
2. can't re-boot
3. unable to access iCloud Backup, Ignore and Settings button inactive
4. unable to unlock unit when using the Home button to turn the unit onTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Is it safe to use the Belkin power strip with USB ports to charge my iPad?
Or is it better to travel with the Wall Charger provided with iPad?
Concerned about safety of the device. Thanks for your thoughts.The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Charge my phone with USB cable
Hi DearsI have a Z3-compact phone. When I connect it to my copmuter with usb cable, it does not charge.Please help me, how can I solve this problem????
Hi Z3-sam,
Welcome to the community.
One thing to note, if you are using the device on say a work computer, there may be security restrictions that wont allow MTP mode to charge the handset.
You could try changing the device in to MSC mode and then seeing if the charge works.
Menu > Settings > Xperia Connectivity > USB Connectivity > USB Mode > MSC
let us know how you feel. -
I charged my Shuffle with...
The problem appeared when I tried to charge my Ipod Shuffle with a non-apple charger. After that the player started acting really strange: It would only play music when connected to that charger, once disconnecter it wouldn't give any sign. My computer does not recognise it, it looks dead...what did I do? Please, help me!!!
Thanks a lot !!!
PeterYou'll have to try working through the troubleshooting steps on the iPod Shuffle Support Page that deal with what to do when your iPS isn't seen by the system or by iTunes; the hope there is that those would be successful and that you could then Restore your iPS from an iPod Updater program and get things working again.
I sort of suspect that your suspicion is correct, though .... something went wrong when you plugged it into that other charger and your damage may not be repairable. -
my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges
yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute -
Can I use a USB for 2nd generation shuffle with a 3rd generation shuffle
Can I use a USB for 2nd generation shuffle with a 3rd generation shuffle?
Seems to be a good fit, but my computer doesn't seem to recognise it.GreenApple5315 wrote:
Can you use a 3rd gen charger with a 2nd gen Shuffle?
By "3rd gen charger" are you referring to the USB cable with the
4 ring audio connector on the other end?
If so, the answer is again NO... -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy
Maybe you are looking for
-
I have a 13" Macbook Pro running OSX 10.8 and when I tried to update to 10.8.1 through the Mac App store it didn't acknowledge that there was an update available so I went to the apple website and manually downloaded the update. When I attempted to u
-
Can anyone tell me if its possible to update the nvidia drivers for the above model beyond that which is currently listed in the toshiba updates section. Those drivers are quite old now, and I tried downloading the MCE specific drivers from nvidia, b
-
I have a form containing many standard form components: text fields, combo boxes, labels, etc. When a user clicks the submit button the form elements are all removed by this.remove(x). Then, a new set of form elements are added with this.add(y). The
-
Paragraphs Spanning Pages Not Converting
Hi all - Looking for some help please! Using Acrobat Standard 9.1.1 to convert an MS Word 2002 (SP3) document running on Windows XP Pro SP2 Number/bullet lists items which break across two pages will not convert the second portion of the list-item wh
-
Printer shows paper jamming in output bin but no paper visible in 2605dn
printer shows paper jam in output bin---have reset and cleared everything---still shows same. What now?