ChaRM 4.0 Action

we are in ChaRM 4.0 ,after created the Change Request.if we changed the Action to Approved,the status not has been set to Approved.it is still in "to be approved" label in the header.
what could be the problem, if any OSS notes found for this just send to to me

Hello Prakash,
Just thinking in other lines after changing the Status to 'to be approved'this request appears in the queue of the Authorizer and he should set the status to "Authorize the CR"in the Actions button. Once this change is saved, then only the status moves to "Authorized status".
Also do check for the SAP Note 885113 which talks about the authorizations to be provided in CR mgmt.
Rgds,
Sri

Similar Messages

CHARM: Starting customer actions via toolbox??

Dear developers,
does anybody know wheter you can start customer actions via the toolbox in a change request order?
I want to start such a customer action (function module or customer method) when choosing an entry in the toolbox and saving this order. Is this possibly? If yes, can you explain the way to the solution.
Best regards,
Jens

Hello Paul,
thanks for your answer and sorry for the delay.
Where should I set this parameter?
SolMan is not using SSO, our portal environment is working fine with SSO.
The way how we are working is:
Portal (with SSO, LDAP) --> IViews --> ABAP Backend Applications
The way how we are using SolMan + Ticketing system:
Portal Login (SSO, LDAP) --> user open the IView for SolMan --> starting the transaction for ticketing
Planed is:
Whenever a ticket status is changing under a Charm ticket (workflow ticket), the user is getting an automatic generated SolMan mail with the following information:
HTTP://<servername>:8000/SAP/BC/BSP/SAP/DSWP_BSP/DSMOP.HTMLISBSP=X&CMD=NOMI&NCMD=CRMVW&ID=D11FD44B83657E2AE1000000136A420A
This link is starting the SolMan, but require a login to the SolMan without SSO, LDAP use. This means for us, the users would need access direct to SolMan as well, instead to use the SSO, LDAP from the portal.
My question now:
How can we modify the link that it is going via the portal SolMan IView with a parameter for the ticket ID.
Thanks a lot
Bernd

CHARM Workflow- Z Actions

Hi All,
We are in process of implementing workflow for CHARM.
Our requirement is to trigger a workflow whenerver there is change in the Status of the request.
After going through various articles and blogs, i am able to process till the step to create a Z action and attach that action to existing Profile.
Although i have create a z action and attached my customized WF Template number in 'Processing types', my workflow is not getting triggered once the status is changed to 'IN development. I have maintained the conditions as well.
All i am confused is, Do i need to put any triggering event ( Currently only 'created' event is getting triggered in system') and yes, which event do i need to put here
OR
Does system fill the container element ( of type BUS2000116 import checked) of my customized workflow .I have made my WF template as general.
Kindly suggest.
Regards,
Sangvir Singh

Hi Sangvir,
One quick and easy way is to check if your action got triggered in the system or not. You can do that using an Action monitor program RSPPFPROCESS (transaction SPPFP).
There you could check the status of the action and if it all got triggered. If the action got triggered correctly, you could chekc in the log what the issue was which did not cause the workflow to trigger.
Hope this helps!
Regards,
Saumya

Two Times TP need to be released for import to QAS

Dear All,
Once the Developmemt is completes, developer is releasing the task from the satellite system & after, the TP from the CHARM. Some times the TP is not getting released from CHARM in single action, so again we need release one more time. Why the system releases the TP after second effort. How can avoid this ?
regds,
Channabasappa

"Straight answers" will promptly be provided on or after June 6th... Sorry. The volunteers here have no such information, and the Palm agents cannot provide answers without losing their jobs.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Authorized Status problem in change Request

Hi All,
when a correction is completed/withdrawn, generally the change request status changes to Implemented/new and we used to confirm the realization.
The Problem is due to some missing configuration(in status attribuites), this was not done before and tickets were created and authorized.
now after the necassary configuration being done, For the open corrections it is changing to implemented. but for already completed corrections the status is still Authorized only.
It is always getting displayed in the report as not completed ones.
Kindly guide on how can we close this change requestswith status authorized and whose corrections are completed already.
Regards,
Subhashini.

Hi Subhashini.
I am running in to the same problem....
The Problem is due to some missing configuration(in status attribuites), this was not done before and tickets were created and authorized.
Could you please tell me what changes you did to resolve the issue ?
Please see the active thread:
[Re: Controlling ACTION in ChaRM|Re: Controlling ACTION in ChaRM]
Regards.
Rajesh Narkhede

Email setup for Test Workbench

Hi
I am looking to setup Email notifications for Test Workbench.
Such as, automatically emailing testers when Test packages are assigned
Emailing Developers when a Test Problem Report is created.
How do i do this? Does anyone have any documentation they can share?
Really need some help.
Many thanks

Yes Ramesh,
By setting up ChaRM the following actions can be triggered automatically,
1) When a requestor creates support message based on an error, service desk employee will be notified automatically
2) A developer will be notified when a change manager in the service desk assigns a developement task assigns.
3) When the developer completes the task, change manager will be notified again.
4) Then, a tester will be notified when change manager assigns a tester.
and many other things also there in the sequence.
Regards,
Satish.

ChaRM: Some actions missing in the Correction Document?

Dear all:
I have followed all the tutorials about creating a charm, everything is fine but when handling the correction document I can never see in the action list the items "Logon to system" and "Complete development" (I can see al the other items though). Anyone has an idea about this? Where those actions come from?
Thank a lot in advance!!
Federico.

Hello Frederico,
These actions are PPF actions, they are assigned to an action profile and this action profile is assigned to the CRM transactions such as SDCR, SDHF, and so on. You can maintain that at SPPFCADM.
However, sometimes the basis PPF database tables are not completed updated during the activation of BC-set SOLMAN40_CHARM_BASICFUNC_001.
Our recommendation now is to reactivate the ChaRM BC-Sets, in order to recreate all entries missing. However, I have to remind you that if you have performed some customizing in ChaRM this will be overwritten.
So, if you agree with this statement, please reactivate the BC-Sets in this sequence:
SOLMAN40_CHARM_PROXYFACT_001
SOLMAN40_CHARM_BASICFUNC_001
SOLMAN40_CHARM_TRANSTYPE_SDMJ
Please check note 907768 that has informations about how to activate ChaRM BC-Sets.
Best Regards,
Fernando Rocha

Controlling ACTION in ChaRM

Dear Experts,
I'm very new to Change Request Management. I am using Solution Manager 7.0 EhP1 (ST - 24)
I've configured ChaRM at client and it is functional. To simplify the things initially I have assigned all default roles to all ChaRM users.
Now I want to restrict all ChaRM users to their defined activities. I have tried manipulating some authorization profiles but didn't get desired result.
Here are the requirements.
Helpdesk .............: Should be able to create change document only.
Change Manager : Should be able to Authorize or Reject change request.
Developer ...........: should be able to perform development, create /release transport request, pass correction to test.
Tester .................: Should be able to test and approve test result only.
IT Operator .........: Should be able to transport request in Production
Any other activities except above defined should be restricted to other users. For example HELPDESK user should not able to "Authorize Change Request".
In short I would like to control ACTION in change transaction/document.
How can I achieve this ? Can anybody sheds some light on the same ?
Regards.
Rajesh Narkhede

Dear Jansi / Federico,
Thanks for your support...
All most all authorization tunning is done and working perfect excpet one thing.
Usually when a correction is completed or withdrawn, the change request status changes to Implemented or To Be Authorized and we used to confirm the realization or Authorized it.
Due to some missing configuration, When developer set the status to "Complete Correction" and save the transaction, it close the current transaction but status of the change request is not getting changed to "Implemented". It still remain in "Authorized".
Because of this, Change Manager can not do "Confirm realization". I have tried B_USERSTAT and B_USERSTAT_T and Task list objects. Nothing seems to work.
Can you please guide...?
Just to update the message...
I refered the below thread:
[Authorized Status problem in change Request|Authorized Status problem in change Request]
After executing the report CRM_SOCM_SERVICE_REPORT, it changed the status to "Implemented" and change manager is now able to "Confirm Realization".
But I want it to be happened when developer perform the action "Complete Correction".
Please guide,,,
Regards.
Rajesh Narkhede
Edited by: Rajesh Narkhede on Feb 2, 2011 4:09 PM

ChaRM actions reset for developer

Hi I am configuring ChaRM workflow.
For the devloper I have not done any changes in the actions, whereas whenever I 'create transport request' through developer's actions after that the available actions are again back to the old one i.e. 'Set to in development' and 'Cancel Procedure'.
Any pointer to the possible problem.
Regards,
Smita

Hi Smita,
did you look to the following note :
Note 919477 - Normal correction reset to status "created"
Is it the same problem ?
Regards,
Stéphane.

CHARM Actions- set to in development

Dear All,
In CHARM SDHF transaction(UC) is in created status.
Now when I click on actions it should show me only 'Set to In Development' & 'Withdraw correction', but it shows other actions like 'logon to system', 'Confirm correction', 'complete correction' & 'Go to task plan', Which are required at later stage.
How can I hide these unusable actions at this scenario, because developer will do 'set to in Developement' first, then remaining things will come.
Edited by: PK on Mar 12, 2010 8:36 AM
Edited by: PK on Mar 12, 2010 8:36 AM
Edited by: PK on Mar 12, 2010 8:37 AM

Hi,
you have to define in which status an action can be executed.
Start transaction SPPFCADM, mark CRM_ORDER and click button "Condition Configuration".
There you have to select your action profile and check the values in tab "Schedule Condition" for every action.
It there is no entry, the action will be shown in every status.
You can define your own condition using container value "&CRM Service Process.User Status&".
Hope this helps,
Christoph

SAP SolMan ChaRM Actions

Dear Experts,
I've just finished configuring Z transaction types for ChaRM.
During my test for each different type, all worked fine.
Now, after finished everything, I got errors on my Z Change Request when a simple action is performed.
The actions only change User Status, no actions or conditions are attached to any status of the Z Change Req.
The error I always get is 'An action was terminated due to an exceptional situation.' and the more detailed I find is 'CX_SOCM_PRECONDITION_VIOLATED'.
The application log (SLG1) doesn't provide me much more info.
Does anyone has an idea how to fix this?
Any help is appreciated...
Best regards,
Roel

Hi,
remember to cleanup the PPF actions
Txcode: SPPFCADM --> Select the Clean Up Inconsistencies options and pres Clean Up..
This help me more than once. Is useful when you have issues with the PPF actions :-)
BR
@WenSolman

CHaRM-Action "Create Transport Request" is cancelled

Hi All,
when i click on the action "Create Transport Request" and save the change document the following error is displayed
"Action Create Transport Request in system SM2 200 of type Source Systems has been cancelled"
where SM2 200 is our Dev Client in the same Solution manager.
i did add the SAP ROLE "SAP_S_RFCACL" to the user in both the client and gave full authorization
but it did not help.
Regards,
Pradeep L

hi Pradeep,
i am doing ChaRM configuration in our Solman system and also new to this.
i need help for "Create Transport Request" from CRM action....
Is it possible to create TP request from CRM action??
if yes please guide me how to do it?
Expecting ur reply...
Regards,
Selvakumar RV

ChaRM: SDTM Test Message, no actions available

Hello Solution Manager Gurus, in our system, when a Test message is created it can be set to In Process, but when it is In Process there are no actions available.
This is the contents of the action determination log:
Determination started
Application: CRM_ORDER action profile: SDTM_ACTIONS
Application class: CL_DOC_CRM_ORDER_H GUID: DF014BC822CBE4F1AC2A0014227724B9
Action ON_CREATE_TM (During Creation)
1 conditions for action ON_CREATE_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action CHECK_STATUS_TM (Checks Consistency)
1 conditions for action CHECK_STATUS_TM were read
Condition 1 returns an action template
Number of action templates from the determination: 1
Action CHECK_STATUS_TM type MET was generated and added
Action Merging: One Unprocessed Action with Equality Check
An identical action has been determined again
Action CHECK_STATUS_TM of type MET is kept
Action CHECK_STATUS_AGAIN_TM (Check Test Message Again)
1 conditions for action CHECK_STATUS_AGAIN_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action LOGON_TM (Logon to System)
1 conditions for action LOGON_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action IN_PROCESS_TM (Take "In Process")
1 conditions for action IN_PROCESS_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action TO_RETEST_TM (Pass to "Retest")
1 conditions for action TO_RETEST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action TESTED_AND_OK_TM (Confirm Correction)
1 conditions for action TESTED_AND_OK_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action WITHDRAW_TM (Cancel Test Message)
0 conditions for action WITHDRAW_TM were read
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Balance follows
Edited by: Richard Bailey on Jan 14, 2010 4:32 PM

Here is the balance of the log:
Action TESTED_AND_NOT_OK_TM (Reset "In Process")
1 conditions for action TESTED_AND_NOT_OK_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action RELEASE_REQUEST_TM (Release Transport Requests)
1 conditions for action RELEASE_REQUEST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action CREATE_REQUEST_TM (Create Transport Request)
1 conditions for action CREATE_REQUEST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action CREATE_TASK_TM (Create Task)
1 conditions for action CREATE_TASK_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check
Action NAVIGATE_TO_TASKLIST_TM (Go to Task Plan)
1 conditions for action NAVIGATE_TO_TASKLIST_TM were read
Condition 1 is not fulfilled
Determination did not deliver any action templates
Action Merging: One Unprocessed Action with Equality Check

CHARM: No Actions are Displayed

Hi Experts,
I have started configuring CHAMR in our solution manager EHP1. I have copied Transaction "SDCR" to "YDCR" as a first step and copied all the dependents of SDCR to YDCR. When I started creating my first Change Request Document, after fulfilling the required details like Partners, Subject, Description etc, I saved the document. After that When I wanted to "Authorize the Change" by using "Actions" button, it says that "There are no actions in the worklist"
May anybody please tell me how I can get the default actions "Authorize Change" or "Reject" of the Change Document for Change Manager?
I am new to this area therefore, I express my apologies for asking even silly questions here. Your small input can really make a big difference in my understanding!
Waiting for your kind replies.
Regards,
Faisal

Hello Faisal,
Since you mention that you are new, you may not have done the required IMG activity in SPRO.
Please make sure the BC-Set SOLMAN40_CHARM_BASICFUNC_001 is activated in transaction SPRO or in SCPR20 which might be easier than navigating through the IMG for Solution Manager.
For further reference please refer to SAP Note 907768 - General note for Change Request Management ST 400
If that has been done be aware when you authorize a SDCR document for example a SDHF document is created, until the associated SDHF is not in status E0006 Production or E0010 Withdrawn there are not actions in the worklist of the SDCR document, this is a standard behavior.
However I tend to think activating the Basic Configuration Set SOLMAN40_CHARM_BASICFUNC_001is you issue, and acvtivating it should resolve this problem you are encountering.
Regards,
Paul

CHARM: Lock actions if the same role is used

Hi,
is it possible to lock the actions, when a user is (e.g.) change manager and developer at the same time?
in some our department it is possible that to different users got the role change manager and developer, but we dont want let one person commit changes and develop at the same time.
kind regards
dirk

Hi Dirk,
you could create a scheduling condition for the action that makes the action not show up in the action dropdown if the change manager and developer are the same BP.
regards,
Jason

ChaRM 4.0 Action

Similar Messages

Maybe you are looking for