ChaRM 4.0 NO Export Sytem

we are using ChaRM 4.0 , when i am refreshing the project cycle project administration . it's giving the following warning error .
Warning: Problems occurred during synchronizat
of the system landscape
i have checked the logs in SLG1 transaction , its giving error message as "NO_EXPORT_SYSTEM FOR HP1:300" .
I found some notes -> 825894 . This note is only for 3.2, in that sap asked to check the transport route.But in my STMS there is no error giving in transport route.
The HP1:300 is my satelite Production system . ( Domain link done )

Hi Prakash,
Check out our answers in this link.
Re: how i can copy the script from one language to other language
Feel free to revert back.
--Ragu

Similar Messages

NFS exports from Mac

Hello,
I have a little home network with a Mac and an NSLU2. The NSLU2 exports some directories (or folders) via NFS to the Mac. Additionally it makes backups from the files its exporting.
Now I wanted to do the other way round: export from the Mac the /Users directory via NFS to the NSLU2 so it can make backups from the /Users directory too. But the NFS export (Mac to NSLU2) isn't working.
I used NFS Manager 2.8 for the NFS imports (works like a charm) and for the exports (works not at all). The NFS Manager doesn't show me the list of exported directories (nor does 'showmount -e' on the Mac nor does 'showmount -e <Mac-IP-address>' on the NSLU2 show any exported directories). Furthermore a 'rpcinfo -p' doesn't show an entry for nfs with port number 2049. I had a look at some websites but all seem to show that I didn't do anything wrong.
So, what's going wrong? I don't use Mac OS 10.4 Server. Could this be a problem?
Regards
Michael.
Mac mini Mac OS X (10.4.3)
Mac mini Mac OS X (10.4.3)
Mac mini Mac OS X (10.4.3)

I had the same question, NFS is so much more responsive than SMB but isn't so obviously accessible on OS X. I found this site:
http://astcomm.net/tech/nfs_howto/server/
Works perfectly but you have to be careful with the Firewall. I enabled UDP port 2049 (nfsd), tcp and udp ports 111 (portmapper), and then used rpcinfo -p to see which udp port mountd was using, unfortunately this tends to change each time it is started so you can't put a fixed value into System Preferences for the firewall. Still trying to work out how to resolve that.
Mac OS X (10.4.3)

Interactive pdf issue

Hey guys,
I've got really strange and annoying issue with interactive pdf files.
I've created with Indesign CS5.5. an interactive pdf with some clickable buttons. The preview mode works like a charm and when I export it my Reader 8.0 displays evertyhing correctly and the buttons also work.
Unfortunately most of my colleague's computers have the Reader 10.1.3 installed and with that the interactive buttons won't work anymore. I also tried on different PC's Reader 9 and Acrobat X but they also show the same problems: The buttons just won't work properly. The can be clicked but that's it.
Can anyone help me with this problem?
KR
Zeljko

Hey Grant,
thank you so much for your effort. But I have to say that that's not the solution for my problem.
You see my interactive features work perfectly with Adobe Reader 8. But with the Reader 10 it jsut won't work.
I've created a pdf for you to see but I ripped it off all its former content:
http://dl.dropbox.com/u/824709/Adobe%20Test.pdf
and here's the .indd file
http://dl.dropbox.com/u/824709/Adobe%20Test.indd
You see, I want the buttons if clicked appear in another state and show a different Picture.
And now it even seems to work. But when I tried it again with all the content the pictures won't change anymore

Premiere, AE, Media Encoder and title bug?

I think I've run into a possible bug.
I'm editing Canon 7D material with my first clip in the timeline being dynamic linked to AE. On the videotrack above I got a title. Everythings is prerendered ( greenbar above timeline).
Exporting directly in Premiere ( with matched sequence setting ) works like a charm. Fast.
Exporting to Media Encoder works great until it reaches the title above my dynamic linked clip. The render speed drops incredibly.
When I redo this without the title it works in ME. So there seems to be something going on with titles above dynamic linked clips and ME.
Can anyone confirm this?

So, just to be clear, you're having a problem playing the sequence within Premiere when it reaches the embbeded After Effects file, or encoding the file through Media Encoder simply slows down when it reaches the portion of the timeline where the AE file is embedded? If it's the latter, then it's just a matter of the encoder having to process a more robust file. It's common when there's an embedded AE sequence, and/or when there are a lot of effects applied.

4 System Landscape // ChaRM // No Export System found

Hi Folks,
I got some problems with a 4 system landscape in ChaRM.
The error message I get when doing a consistency check within my SMI project is:
Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for NWA-303
Message no. /TMWFLOW/TRACK_N159
Transport route should be as follows:
DEV -> QAS -> INT -> PRD
Since I am still in testing phase I used clients instead of real systems in my configuration (TMS, Logical component,....)
My configuration looks like this:
NWA client 300 -> 301, transport layer ZCHM, transport layer SAP, consolidation
NWA client 301 -> 302, delivery
NWA client 302 -> 303, delivery
Logical Component defined as follows:
Developement System (Source: SAP): NWA:300
Type of Role: D Source System
Quality Assurance System (Source: SAP): NWA:301
Type of Role: O Target System
Integration System (Source: User): NWA:302
Type of Role: O Target System
Production System (Source: SAP): NWA:303
Type of Role: P Production System
Anyone got an idea what is wrong? did I miss anything?
The same configuration works for a 3-tier Landscape (without Integration System).
Any help is appreciated.
Thanks.

Hi Raquel,
Ours problems with RFC and with connections had be corrected with the note below:
1833778 - Activate Change Request management - Check error
Thank you very much!!
Adriana

Functionality to handle JAVA Export and Imports in ChaRM covered under SP15

Hi All,
Is the highly expected functionality of handling change request management for Java based systems (Export-Import for the Java transports) is covered under the Support pack 15 of SOLMAN4.0?
If anyone has any information regarding please share.
Regards,
Kathir

Don't believe this is possible without a manual process linked to it.
The only solution I see for now is that you first only release the TR that need to go to your follow-up system, import them, then perform the manual actions and then release the subsequent TRs, etc...
Same issue is popping-up when using XI Transports, as each TR has a Change List that needs to be activated. If two TRs within the same maintenance cycle contain the same object, the second TR will fail because the change list for that object is not yet activated. A manual process can solve the issue. At our project, we introduced a new user status for this.
Best regards,
Roel

AI CS 6 crashes when I try to export an image with layers to PS CS6

Hi guys!
well, I'm completely newbie on Illustrator. I only have to use it to create level on pdf images to work with it in Photoshop.
So I installed Illustrator yesterday for the first time and immediately the problems started.
Ay the first opening I had more than one error
Immediately following this (before the program started for its first time)
Then I opened a pdf file in it, select > all , Object > clipping mask > release, Layers, release to layers (Sequence).
Till here all went OK.
At this point All i nedd it's to export in Photoshop CS6.
So File > export >save as *psd.
At this point Illustrator crashes every time!
I did all the update with Adobe Application Updater, my PC is new and a really good PC.
It runs Win8 64 and with PS all goes like a charme.
What have I to do? I see many posts about the plugins problem (and still no solution by Adobe).
I ignore the problem for the plugin errors, and after some reload now I don't have that error but this one:
Same thing when I relaunch, each time and every time.
I need to solve this problem and it's impossible for me to call Adobe customer assistence As you can see my English is pretty bad and I can write but not speak by phone.
Can you guys hep me please?
Thanks in advance
Lio

Have you tried trashing the prefs?

Mails not triggering in CHARM

Hi Experts,
I have configured Solution Manager 4.0 for CHARM. It is working fine. My requirement is that, it should trigger mail whenever support team changes.
Initally, I defined a action to trigger mail once whenever a support team is assigned. It worked fine. But the problem with this setting is that, whenever I change support team, it is not triggering a mail and this is understood because I configured to trigger once only. So, I changed the setting of action to "unprocessed", it starts triggering mails whenever I change the support team.
Now Issue is that, it is also triggering the mail to support team whenever the transaction is saved (Ex: When I create change document for a support message, transaction saves automatically) even though support message is not changed. This leads to unnecessary mails.
In order to avoid unnecessary mails, I deleted the existing action and created a new one wherein start condition was not maintained but maintained setting under scheduled condition as per SAP note 865619 and implemented BADI also.
Now I am not getting a single mail whenever a support team is assigned or changed.
Any suggestion please provide.
Thanks in advance.
Regards
Kumar

Hi Kumar,
This can be done very well.
For this you can implement the BADI ORDER_SAVE, method CHECK_BEFORE_SAVE.
In this method you write a code as mentioned below,
1. Use FM
WA_HEADER = IV_GUID.
Insert wa_header into table lt_header.
CALL FUNCTION 'CRM_ORDER_READ'
   EXPORTING
     IT_HEADER_GUID                = lt_HEADER
      IT_ITEM_GUID                  =
   IMPORTING
     ET_CUSTOMER_H                  = lt_customer_h
     ET_ORDERADM_H                  = lt_orderadm_h
      ET_OPPORT_H                   =
      ET_PARTNER                    = lt_partner
      ET_STATUS                     = It_status
      ET_REFOBJ                     = lt_CRMT_refobj_WRKT
       ET_SUBJECT                    = lt_CRMT_SUBJECT_WRKT
   EXCEPTIONS
     DOCUMENT_NOT_FOUND            = 1
     ERROR_OCCURRED                = 2
     DOCUMENT_LOCKED               = 3
     NO_CHANGE_AUTHORITY           = 4
     NO_DISPLAY_AUTHORITY          = 5
     NO_CHANGE_ALLOWED             = 6
     OTHERS                        = 7
IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2. You will get the Business Partners entered on the screen in the internal table lt_partner, read the address number1 for the partner function of the support team.
3. Get the contents from view CRMV_LINKPARTNER using the LV_GUID. And get the address number2 for partner function of the support team.
4. Compare the address number2 & address number1. If they are not equal then trigger a mail else don't.
Let me know if you need some more help.
Reward if it helps.
regards,
mahantesh

Can Someone PLEASE Tell Me Why My Muse Site Will Not Work Upon HTML Export?

Sorry for the long title!
I've had a few threads going regarding troubles with my Muse site. These issues have been on-going, and once I was no longer able to upload to Fetch—and had to export to html via FileZilla—it just seems the problems continue to snowball.
I have a web site. I will disclose the URL here now: www.jamescdarling.com
When this site was html-based (its original form), using my yahoo small business web host and Fetch, it worked like a charm. All Flash files functioned at 100%, embedded videos/players all played great, etc. Then, I switched over to Muse 1.) because I was excited by the potential, and 2.) I wanted to re-design my site, anyway.
So, I created my site in Muse, and uploaded it all into Fetch. I soon found that some of my Flash files and videos were not working. This was the case for a long time. I finally gave up after trying everything and asking lots of questions here.
Just recently, I set out to fix these issues as I was afraid this half-assed site would appear to make me look unprofessional and like I had no idea how to use Flash. I had some problems with the new Muse Update (had to ditch Fetch and use "export with html" using FileZlilla). Changes made to my Muse file were not taking... and each time I viewed my updated site, the updates were not there—it still looked like the previous incarnation of the site. However, with some help from some of the good folks here, I was able to make my site not only update, but work nearly perfectly—or so I thought!
I just clicked on my personal web site URL link in my LinkedIn page, and I see the old-looking site! The bookmark I have of my site is near-perfect—only the videos still will not load. However, it would seem that my site only functions as well as it does on MY computer only—that is, URL's I have been sending out probably are of the old non-functioning site? The changes I make are not being recognized.
If you will, click on my above URL (in bold)..... If you click on "Resume", you should see light blue rules separating each section. But I bet you will see heavier gray bars with headers inside them. Also, if you view my Flash work, go to the "Epiphone Casino Mini Site".... the "Finshes" and "Features" pages' interactive elements will not function as they should (never mind the video page!)—but they work perfectly when accessing my site from my bookmark on my computer.
Can someone please tell me how to make my site update web-wide, and how to get my Flash files to function?
Thanks!!!
Message was edited by: darling67

It seams a lot of folks are haveing issues with FTP upload. Try these areas to look at. Maybe the right answer. I dont use Flash on my sites for a long time now. Anyhow, check these out.
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-publishing-and-managing-your-site/
http://www.adobekb.com/using_3rdparty_ftp.html#usingftp-understandinghowftpworks

Exporting and importing packages SAP inst server

Hello,
Background: we plan to migrate our current installation server to a newer hardware; we have a wide range of different packages. I could recreate them manually, but that would take a (long) while.
i wonder if there is a chance to export installation packages from one server and then import them into an other. I looked through the offical docu and found no note regarding this.
Is there a special directory within the sap installtion server which can simply be copied to the new server?
Best regards
A.D

Hi Andre
No, you can not simply copy some folders.
The official way to do a system copy, i.e, export from the souce system, and then import it on the new system.
Then you will get the same version, patch level with the old system in the new one.
So you don't need to repeat applying all the packages.
The system copy guide can be found from
http://service.sap.com/instguides
- then select netweaver for example,
- expanding the "Installation - SAP NetWeaver Systems"
- there you should be able to find the sytem copy guide.
Best regards,
Thunder

How can a mount a NFS share exported from OpenBSD?

Hello Apple Discussions:
I've been experimenting with NFS in a mixed OS environment, and have been successful exporting nfs share with tigerserver, and mounting it on both a powerpc linux system, and on a powerpc openBSD system.
Likewise, I can export a NFS share from the linux powerpc box, and mount it on the openBSD box and on the tigerserver, although, the latter required using the options (ro,sync,insecure) in my exports file.
However, when I export a share on the OpenBSD box, I can mount it on the linux box, but not on tigerserver.
I would like for the OpenBSD box to export a NFS share securely, with read-write permissions, to the tigerserver.
After reading so many tutorials, that it would be a page of links, just to list them all, I am pulling my hair out. However, I have found one thread that suggests, that perhaps what I'm trying to do is impossible:
http://www.bsdforums.org/forums/showthread.php?t=54308
Here it is suggested that the NFS won't work because tigerserver is not using UTF-8?
I will have to say, that I was somewhat alarmed, that the only times I succeeded in mounting an nfs share exported from linux onto tigerserver, it was when the "insecure" option is used in the /etc/exports file. There doesn't seem to be an equivalent for the linux style exports option "insecure", in the bsd style options of --maproot=user:group1:group2.
But I don't like using any options that say "insecure" anyways, so rather than trying to find out how to make openbsd "insecure", I would rather like to find out if there is a way to get tigerserver using UTF-8, at least when mounting NFS shares, if this is indeed the issue.
Here are the more technical details. I've created a user on all sytems named "fives" with the userid of 5555 and the groupid of 5555. I made the user local user in the local net info domain, but I've tried it with an LDAP user as well. The folders I wish to export and the folders into which to mount them are all owned by user fives and group fives, and have permissions set to 0775. The ip addresses are OpenBSD=192.168.222.111 TigerServer=192.168.222.233 LinuxPPC=192.168.222.253. I've included the relevant NFS setup files and running processes below:
ON THE OPENBSD BOX:
#/etc/exports
/fives -alldirs -network=192.168.222.0 -mask=255.255.255.0
/exports/fives -mapall=fives:fives 192.168.222.233 192.168.222.253
#/etc/hosts.deny
ALL: ALL
#/etc/hosts.allow
ALL: 192.168.222.233 192.168.222.253
#/etc/rc.conf.local
portmap=YES
lockd=YES
nfs_server=YES
#here's proof that the daemons are running on the OpenBSD box;
rpcinfo -p localhost
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100005 1 udp 863 mountd
100005 3 udp 863 mountd
100005 1 tcp 613 mountd
100005 3 tcp 613 mountd
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100021 1 udp 895 nlockmgr
100021 3 udp 895 nlockmgr
100021 1 tcp 706 nlockmgr
100021 3 tcp 706 nlockmgr
# actually, I don't see statd, but haven't found the equivalent in openbsd. There's rpc.rstatd, and maybe it should be listed here, but there doesn't seem to be a way to launch it directly. This is a competitor with the UTF-8 theory about why it's not working.
ON THE TIGER SERVER:
# here's proof that tiger server sees the mounts:
showmount -e 192.168.222.111
Exports list on 192.168.222.111:
/fives 192.168.222.0
/exports/fives 192.168.222.233 192.168.222.253
# here's the result of user fives' attempt at mounting a share:
sudo mount -t nfs 192.168.222.111:/exports/fives /imports/fives
mount_nfs: /imports/fives: Permission denied
# yet user fives has no problem mounting same share on linuxppc box.
What is different about OSX server? I thought it was supposed to speak NFS?
---argh... I'm steppin out for a pint.. Hopefully when I'm back it'll just work.

One thing not mentioned is that if you decide on the multiple user approach, you can have your music folder in Shared Documents so you only store the tracks once.
Each user is free to choose which of those tracks they want in their library.
There is an Apple help article on multiple users.
http://docs.info.apple.com/article.html?artnum=300432

Unable to create Project Cycle in CHARM

I am trying to set up Change Request Management for maintenance project, in solution manager 3.2.
1. The service desk is configured.
2. Created a project of type maintenance.
3. Added users to the project team.
4. Set up transport route (????) but not sure if that works or not ...
5. When I go to change manager transaction and try to create projrct cycle, it says "project is not released"
6. I am not sure if this issue is simple or is a cascasding effect of previously (un)configured steps.
Please help me in the same.
Also, it would be very useful if someone can talk of all the sequential steps in configuring CHARM. And, how exactly do we need to configure the transport routes? any specific rules to follow there ???
Thanks,
Anil Santhapuri

Hi anil/All
We are also facing same issue. Ours is a two system landscape with only dev and production specified in the stms of domain controller.
We have defined b95 as dev and c09 as production in the domain controller b95.
We have created a logical component z_charm_new and in system assignment given b95:000 as dev and c09:00 as production.
We have used this logical component for creating img project.
but when we click the create task list we are getting following error
Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for C09-000
Message no. /TMWFLOW/TRACK_N159
Diagnosis
System C09-000 is to be changed in a Solution Manager project, but no system in the system landscape exports transport requests which are imported into this system.
System Response
If a task list has already been generated for this Solution Manager project, you cannot use it. It is automatically locked.
You can unlock the task manually by activating it with the 'Status' pushbutton in the task list, but you must first resolve the error.
There are several possible reasons for this error:
The transport paths may not have been created correctly in TMS (Transport Management System). Go to the transaction STMS in the system which contains the domain controller, and check and correct the transport paths.
You are in the system containing the domain controller so:
Go to the transaction STMS in the system C09-000. Choose 'System Overview'. Find your system with its transport domain in the 'Domain' column. The Icon Legend (pushbutton) shows the icons for the Domain Controller. Search in systems with the same domain for a system with this icon in the 'TYPE' column, and logon to it.
You can change the transport paths with the 'Transport Paths' push button in the transaction STMS. Choose 'Distribute and Activate' after saving.
The role assignment in your Solution Manager project may be incorrect. A system in which transport requests are created and released (development or maintenance system) must have the type system role 'source System'.
Go to the 'System Landscape' tab and 'Systems', in the project definition in the transaction SOLAR_PROJECT_ADMIN. Choose 'System Role Assignment' and 'Edit System Roles'. The development or maintenance systems must be of type 'Source System'. If you make changes, go to the 'System Landscape' tab and the 'Change Requests' tab, and refresh the project landscape for Change Request Management.
Please help with some tips. If you need more details please let me know.

No longer able to export .snd or System 7 .sfil audio files

I don't know what version of Quicktime or OS X removed the export option, but I can no longer create .snd or System 7 .sfil audio files using the Quicktime export feature.
Any suggestions as to how I can convert any newer sound file format to this older NeXT/Sun sound file format?
My current OS is 10.4.3 with Quicktime 7.0.3 Pro.
I'm ultimately trying to change my new mail notification in Entourage using Expression (http://soundsetcentral.com) to modify the Microsoft Sound Set.
PowerBook G4 Mac OS X (10.4.3)

I have found the solution to this issue...
1) You need to install OS 9 on your OS X "Tiger" using the OS 9 installation disc that shipped with your Mac.
2) Go to System Preferences and select Sytem/Classic.
3) Select the "Start/Stop" tab and highlight the System Folder on your boot HDD. Click the Start Button.
4) Download SoundApp 2.7.3 from http://www.versiontracker.com/dyn/moreinfo/macos/4124&vid=4134
5) Extract the SoundApp directory to "/Applications (Mac OS 9)"
6) Open SoundApp
7) Select File/Convert...
8) Find the sound file you wish to convert.
9) Set your settings for export:
Format: System Sound
Encoding: u-Law
Rate: No Change
Channels: No Change
Bits: 16-Bit
10) Click the Convert Button.
11) Save the file.
This file will now be recognized by "Expression X" (http://soundsetcentral.com/)
You can now create your own notifications for Entourage in Apple OS X "Tiger".
I hope this helps. Please let me know if you have any questions or comments.
Regards.

Very slow Export to Media Encoder and Media Encoder connecting to dynamic link server

My flow is this: Open After Effects CC, import an image sequence, go to File > Export > Add to Adobe Media Encoder Queue...
Every other time i do this it will take 2-3 mins before Media Encoder even shows the splash screen, then it'll take another 1-2 mins to open.
Next, I'll select my custom preset over on the right side of the window, then hit the Play button to begin encoding. Sometimes nothing will happen at all, sometimes I'll see the Orange stripped bar on the lower left and the message Media Encoder connecting to dynamic link server and that'll last 5+ minutes and I end task to get out of AE and ME. Sometimes, ME will begin encoding right away and zip through the small animation sequence quickly without issue.
I have WIndows 7 Pro, I'm on a work network with access to the internet and AE has been updated 24 days ago. I have a subscription and I'm signed on. However, sometimes I do not have the Creative-Cloud icon in my systray.
Thanks,

Thanks. I have 16GB Ram, 64bit Win7, Intel(R) Core(TM) i7-3970X @ 3.50GHz 3.50GHz. AE is set to have maximum disk cache of 46GB. RAM reserved for other applications: 5GB RAM available for AE, PR, Pl, (some triangular icon [edit] which is ME ), Ps: 10GB. nothing else checked on that screen.
Typically just a mail client, 1 or 2 sessions of Firefox, 1 or 2 network folders open when i launch AE.
The last couple of times specifically, i had a 450 frame animation sequence at native 720p. then i added a curves layer on top of it in AE, then added two ~600x300px logos, one in each lower corner, then added a new solid layer which i used as a vignette. Finally over that i added a 720p still image which i held for another 15 seconds beyond the animation.
For the above, i ended-task, rebooted, brought it up again and it lauched ME quickly, then i got the stripped bar and connecting message until i ended task on that, then the 3rd time was the charm - everything opened quickly and it began to encode quickly.
The next three uses late afternoon yesterday were 150 frame animations at 480x270 and they all seemed to work fine. I created the sequence in 3ds max, then closed and went into AE. Then I'd close AE render another sequence, back into AE etc...

CIN-Two Export scenarios-Duty not paid & Duty Paid

Hello SAP SD CINers,
I have a basic requirement which is that one industry exports without duty paid (which is always the case) and other duty paid which means in the Billing document & the Export Excise Invoice the Price will be statistical but the Taxes like JEXP (IN: A/R BED %) will be accounted for.
The solution as formulated by us is that we have a new series created and then all seems right but the problem here is that it is very very difficult to get a new series from Customs for different busines scenario as normally only two are sanctioned like Home consumption and for Exports.A new Shipping Point be created specially for this scenario which can then be maintained in the Excise/Series group determination but the problem here is that one needs a new Series Group to be maintained which should have utilization not clicked as normally for exports it is ticked off for no utilization but here we need to carry out utilization.Hence, the requirement for a new Series is generated.This is very difficult to convince the Authorities to sanction a new series grouop as this is normally not done.
Could you CIN masters suggest something for this.
In Std SAP, we can have two order types for e.g. OR & RE to have the same No. range int. assignment which will cause the number maintained to find the next available number for both OR as well as RE..OR can have number "1" and RE can have number "2" & so on and so forth.Duplications dont happen here but in case of CIN Excise Invoices, this happens if we shift between Series "EX" (for export) & new Series say "S1" both of which have Object " J_1IEXCEXP" have same from -to numbers.
This problem can be easily be solved by making the changes in the source code which allows this two series groups to have the same number range and the numbers shouldn't get duplicated and the sytem should take in next available number just as this is done for Sales Orders.But that is a change, so we would request for some solution within the existing setup.
I am sure this problem must arise with almost all Indian export factories so there must be some workaround for this problem.
Kindly advice as this is very challenging scenario.In case of further queries, kindly send query for this & i will be looking forward to valuable inputs from you all regarding this.
Thanks All in advance.
Regards,
Dinesh Relwani.

Hello SAP SD CINers,
I have a basic requirement which is that one industry exports without duty paid (which is always the case) and other duty paid which means in the Billing document & the Export Excise Invoice the Price will be statistical but the Taxes like JEXP (IN: A/R BED %) will be accounted for.
The solution as formulated by us is that we have a new series created and then all seems right but the problem here is that it is very very difficult to get a new series from Customs for different busines scenario as normally only two are sanctioned like Home consumption and for Exports.A new Shipping Point be created specially for this scenario which can then be maintained in the Excise/Series group determination but the problem here is that one needs a new Series Group to be maintained which should have utilization not clicked as normally for exports it is ticked off for no utilization but here we need to carry out utilization.Hence, the requirement for a new Series is generated.This is very difficult to convince the Authorities to sanction a new series grouop as this is normally not done.
Could you CIN masters suggest something for this.
In Std SAP, we can have two order types for e.g. OR & RE to have the same No. range int. assignment which will cause the number maintained to find the next available number for both OR as well as RE..OR can have number "1" and RE can have number "2" & so on and so forth.Duplications dont happen here but in case of CIN Excise Invoices, this happens if we shift between Series "EX" (for export) & new Series say "S1" both of which have Object " J_1IEXCEXP" have same from -to numbers.
This problem can be easily be solved by making the changes in the source code which allows this two series groups to have the same number range and the numbers shouldn't get duplicated and the sytem should take in next available number just as this is done for Sales Orders.But that is a change, so we would request for some solution within the existing setup.
I am sure this problem must arise with almost all Indian export factories so there must be some workaround for this problem.
Kindly advice as this is very challenging scenario.In case of further queries, kindly send query for this & i will be looking forward to valuable inputs from you all regarding this.
Thanks All in advance.
Regards,
Dinesh Relwani.

ChaRM 4.0 NO Export Sytem

Similar Messages

Maybe you are looking for