CHARM activation check failing on "consolidation system for development system SSA-200 in project ZTEST2

Hello,
We are implementing Charmlite and want to activate in project landscape.
We are Solution Manager 7.1 SP11 and testing this scenario in sandbox.
Steps completed:
1. in sandbox domain controller, created two virtual systems and made 3 system landscape, where, I can release the transport and see it in QA system (Virtual system buffer)
2. The LMDB has been updated with Virtual system and in SMSY, the entries of virtual system shows up. The logical components have the client information.
Issue:
in /nsolar_project_admin ->System landscape -> change management, When consistency check is performed, we get error message saying
Virtual RFC is miising (I am guessing, it should be okay)
The logical component is incosistent (This might be the reason the CHARM is not getting activated.
"No consolidation system for development system SSA-200 in project ZTEST2
No track for project ZTEST2 with log. system SSA/200"
For me, when i look in satellite system, the consolidation system is a virtual system and it should be fine.
Please advise
Regards,
Durga PK Saitana

Thank you Karthik. Still the problem persists
I went through the blog earlier. I created l ABAP instance manually in SLD and moved into LMDB and can see the entry in SMSY. (I did not see any option of putting  virtual flag)
We were trying harmonization of RFC from note 1384598 and since we had virtual systems, went with domain links.
After domain links, the virtual systems are read. the Dev ABAP system is not able to find the consolidated system. In the satellite system, I can release transport and move the transport.
Not sure, why this issue is persistent.

Similar Messages

  • Insufficient privilege when Activating an attribute view (person responsible for package = SYSTEM)

    Insufficient privilege when Activating an attribute view (person responsible for package = SYSTEM)
    SAP HANA Studio
    Version: 1.0.33
    Build id: 201206301604 (363996)
    Playing with the efashion tutorial with HANA Studio.
    I am SYSTEM user by default when starting the studio.
    -Schema created
    -DDL created
    -Data loaded
    -Attribute views created
    Below an extract of the error log:
    <info>Create Attribute View failed: SQL: transaction rolled back by an internal error: insufficient privilege: Not authorized

    Hello Anooj and Sri,
    Thank you for your answers, I really appreciate your inputs.
    So I executed this:
    "GRANT SELECT ON SCHEMA SYSTEM TO _SYS_REPO WITH GRANT OPTION;"
    Under the Studio SQL GUI and I still have the same error when activating my very simple attribute view.
    I have installed a recent HANA + Studio + Client release on my laptop:
      SAP HANA Studio
    Version: 1.0.33
    Build id: 201207050531 (364183)
    And yes, this is a demo and yes I am logged as the SYSTEM user (default user when stating the studio). For now, I dont know how to connect to another user with the studio and I will search the doumentation.
    Below a copy/past of the error msg.
    Internal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Deploy Attribute View: SQL: transaction rolled back by an internal error: insufficient privilege: Not authorized (ptime/query/plan_executor/ddl/qx_cube.cc:1514) n
    Create view DDL statement: CREATE COLUMN VIEW "_SYS_BIC"."efashion/ATV_OUTLET_LOOKUP" TYPE JOIN WITH PARAMETERS ( joinIndex = "EFASHION_TUTORIAL"."OUTLET_LOOKUP", joinIndexType = 0, viewAttribute = ('SHOP_ID', "EFASHION_TUTORIAL"."OUTLET_LOOKUP", "SHOP_ID", '', 'default', 'attribute', '', 'efashion/ATV_OUTLET_LOOKUP$SHOP_ID'), viewAttribute = ('SHOP_NAME', "EFASHION_TUTORIAL"."OUTLET_LOOKUP", "SHOP_NAME", '', 'default', 'attribute', '', 'efashion/ATV_OUTLET_LOOKUP$SHOP_NAME'), viewAttribute = ('MANAGER', "EFASHION_TUTORIAL"."OUTLET_LOOKUP", "MANAGER", '', 'default', 'attribute', '', 'efashion/ATV_OUTLET_LOOKUP$MANAGER'), viewAttribute = ('ZIP_CODE', "EFASHION_TUTORIAL"."OUTLET_LOOKUP", "ZIP_CODE", '', 'default', 'attribute', '', 'efashion/ATV_OUTLET_LOOKUP$ZIP_CODE'), viewAttribute = ('CITY', "EFASHION_TUTORIAL"."OUTLET_LOOKUP", "CITY", '', 'default', 'attribute', '', 'efashion/ATV_OUTLET_LOOKUP$CITY'), view = ('V_OUTLET_LOOKUP', "EFASHION_TUTORIAL"."OUTLET_LOOKUP"), defaultView = 'V_OUTLET_LOOKUP', 'REGISTERVIEWFORAPCHECK' = '1' )nVersion: 48n
    Thank you.
    Patrick

  • Distribution system for logical system not correctly maintained

    Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
    I fill in the fields for
    Plant -> 001
    Material -> T-HV200 (Ice Mix)
    At the top I have to enter a "optimization system".
    I chose the logical system I created (CE6CLNT850) from a list.
    After I hit the execute button it says:
    "Distribution system for logical system CE6CLNT850 not correctly maintained."
    The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
    Componentsystem CE6 SAP R/3 4.6c----
    CE6CLNT850
         NX7CLNT800----
    NX7CLNT800,No Short text exists
               LOIPRO----
    Production order
    What is the problem here?
    And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
    best regards,
    Lunatikk

    Thanks for your answer,
    the RFC destination is configured correctly. It says that the connection works when I run the test.
    I'll post it in an other forum as you suggested but I have another question:
    You said that it is possible to have 474 logical systems configured on the system.
    1. Who defined those systems and why?
    I am the first one in my company using this system.
    We ordered to a SAP system through RAC Service.
    I thought we would get a "fresh installation" of the SAP system -
    2. please correct me if I'm wrong.
    For example there are logical systems with names like "boon software" and "camstar", which are real companies.
    There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
    3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible?

  • Business system for legacy system

    hi guys,
    Can we create  business system for legacy system ?If yes what is the use?
    satya reddy

    Hi,
    Yes you have to create Business system for legacy systems..
    It may be the Standalone java . or Third party system..
    When you are doing some POC or such type of things create Business Services
    also..
    A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
    It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
    See the below links..
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
    Regards
    Chilla..

  • CHARM - Activation - Check   Error

    Hi Experts
    When I activate the Change Request Management for PI landscape, I am getting the below error
    Client-specific transport control (CTC=1): No Import single method: Yes
    Message no. /TMWFLOW/CM_CHECK028
    Could you please tell me how i can resolve the issue
    Thanks & Regards
    Venkat

    Dear Venkat,
    Please follow th below steps.
    1. got the sattilite target system developement client (Ex;_ if u are doing charm for R3 system login to R3 dev system ).
    2. go to Tcode STMS press SHFT+F7 it will show the TMS configuration .
         double click on the each boxes in the TMS route 
          go to -
    SYSTEM ATTRIBUTES TAB in that TRANSPORT STARTERGY PART  QUEUE CONTROLLED TRANSPORT SHOULD BE SINGLE TRANSPORT.
    DO THE ABOV EFOR ALL THE BOXES IN THE TMS ROUTE EX:- QA , REGRESSION , AND PRODUCTION SYSTE,
    Hope this will solve this issue.
    Regards,
    Umesh

  • Help configuring system for media system and work

    Hello All,
    First thanks for your help
    Basically I have an outline of what I would like to do and with your help I can get rest figured out. Going to get a Mac Pro 2.66 Ghz 2Gb ram to start with then eventually upgrade to 4g ram, ATI 1900 XT Card,bluetooth and airport,2 superdrives,2 monitors hooked up and 1 hard drive of 750g Thats my starting point
    I want to buy 3 seagate drives of 750g each to fill up to max
    So question 1. is how do I set up the hard drives I have heard about raid 0 and raid 1 but not sure how to go about it?also want the safest set up have noticed sum people on forums sumtimes lose info so I am concerned
    Sum info for the above question is that my plan was to connect the 3 seagate drives into 1 and add my itunes folder to this drive basically a giant media drive plan to have all my music and over 600 and adding movies that i am converting via handbrake so when Itv is realesed I can view all my media on the tv and box all originals up and 1 extra hard drive use that simply for files documents etc.So with this info my next question is
    2.Once leopard is realesed what will be best way to back up info?and how using this configuration or different one?
    Thank you again I know I probly missed sumthing and will ask as info comes in or I remember
    P.s will be doing video editing
    PowerBook, soon to be Mac Pro   Mac OS X (10.4.8)  

    Your questions have been asked and answered in the Mac Pro forums. I suggest you take some time to search these forums for information. You will find information on RAID performance at http://www.barefeats.com.
    For information on backups visit The XLab FAQs and read the FAQ on backup and restore.
    RAIDs do not provide any data security. If you need to maintain a backup of your system and data then you will need to provide additional storage sufficient to backup your main storage array. Given your indicated configuration you would need an external RAID system made up of three 750 GB drives that would be used to backup your internal array.

  • Question on Import Queue for Development System

    Hello,
    I try to import the standard SAP SCAs but get this error in the log-file:
    Info:Starting Step Repository-import at 2006-01-25 11:11:27.0062 +1:00
    Info:Component:sap.com/SAP-JEE
    Info:Version  :NIGHTLYBUILD.20050909033600
    Info:3. PR is of type TCSSoftwareComponent
    Info:Component:sap.com/SAP_BUILDT
    Info:Version  :NIGHTLYBUILD.20050909032900
    Info:2. PR is of type TCSSoftwareComponent
    Info:Component:sap.com/SAP_JTECHS
    Info:Version  :NIGHTLYBUILD.20050909033300
    Info:1. PR is of type TCSSoftwareComponent
    Info:Step Repository-import ended with result 'not needed' at 2006-01-25 11:11:27.0078 +1:00
    Please Help!
    Thank you!

    Hi Mehmet,
    the import is not needed mean that the SCAs or newer versions have already been imported.
    If they are not available (check the no. of DCs in the corresponding compartments of CBS WebUI) you can try to "restore system state" and import them again.
    Regards
    Helmut

  • Disable import/export facility for development system in ESR/ID - PI 7.1

    Hi,
    We have a requirement to ensure all developers only use transports to move objects from Dev to QA etc.
    Therefore we wish to disable the export/import option in the ESR and ID so it cannot be used at all to bypass the transport system.
    Anyone know what authorisation controls the visibility of these options ?
    Cheers
    Colin.

    Wrong forum !!

  • Multiple clients in Developement system for Charm

    Hi Solman experts,
    We are planning for the Charm implementation and we have multiple clients in Developement system.
    Major hurdle is how to keep all the development clients in sync.
    we have following clients
    100  Golden client
    300  configuration client
    400  ABAP Developement client
    500  Unit test
    600  HR1
    700  HR 2 clients
    All configurations will be made in Client 300 and transported to QA and all developements will be made in client 400
    Transports released from 300 and 400 should go all other clients.
    Solman experts could anyone advice whether this is can be done using charm.
    regards
    Naveen

    Hello Naveen,
    Please, check the point 1 of the following link:
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    I think that this link can answer your question.
    Best Regards,
    Diego Fischer

  • Password Check Failed, Fatal Error, System Halted, CNU949701P

    Hello!
    I have a HP netbook model Mini CQ 10, and I have not switched it on in a while.
    I recently went to turn it on to recover some important documents and this error message shows up;
    Password check failed
    Fatal Error... System Halted
    CNU949701P
    Canu anyone PLEASE HELP ME! I would be so grateful!
    Thank you!
    x
    This question was solved.
    View Solution.

    Try >> e9lovox132
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Filesystem check failed, but filesystems are clean

    Im running custom kernel and this might be related to it, but Im on my wits' end here and looking for pointers.
    The problem is, Im getting filesystem check failed every time I boot my system. And it gives no apparent reason
    for it to happen. I have fsck'd my partitions many times and they are clean. My hwclock is in time and rc.conf is set
    to 'localtime'. The problem didn't occurs on the previous kernel (2.6.18) I had, so I've been using its running config to
    compile the new one (2.6.23). The thing is, the previous kernel works fine, no filesystem check failed in boot. Only
    difference between those two is I had to enable HOTPLUG in the newer kernel to get udev working, otherwise it would
    complain about failing netlink socket in initscript.
    As a temporary solution, I commented out the filesystem check from the rc.sysinit and it boots further. This time
    it fails to mount my /boot/ and /home/ directory and fails to activate my swap. Effectively only root is mounted, but
    after logging in, "mount -a" works without any problems and I can use my system normally.
    I have compiled all(?) the needed modules to the kernel, so initramfs shouldn't be needed, but I've tried it anyway, no
    luck there. The system is build with 2009.08 core install disc, no packages updated as far as I recall.
    fstab:
    #none /dev/pts devpts defaults 0 0
    #none /dev/shm tmpfs defaults 0 0
    /dev/hdb /media/cdrom auto ro,user,noauto,unhide 0 0
    #/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
    #/dev/fd0 /media/fl auto user,noauto 0 0
    /dev/disk/by-uuid/728c65f2-a84f-401f-9899-17020758b829 /boot ext3 defaults 0 1
    /dev/disk/by-uuid/2767f772-203a-4fe9-ac4d-7c8754abc4c8 swap swap defaults 0 0
    /dev/disk/by-uuid/b0b958c4-5f24-414a-8826-6df956f0815b / reiserfs defaults 0 1
    /dev/disk/by-uuid/e83b7114-86fe-4e8f-9e95-0d92b8e50d1a /home reiserfs defaults 0 1
    dmesg:
    Linux version 2.6.23-xbox (root@xbox) (gcc version 4.1.2) #3 Sat Oct 2 14:20:54 EEST 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000003c00000 (usable)
    BIOS-e820: 0000000003c00000 - 0000000004000000 (reserved)
    60MB LOWMEM available.
    Entering add_active_range(0, 0, 15360) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 15360
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 15360
    On node 0 totalpages: 15360
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 88 pages used for memmap
    Normal zone: 11176 pages, LIFO batch:1
    Movable zone: 0 pages used for memmap
    DMI not present or invalid.
    Allocating PCI resources starting at 10000000 (gap: 04000000:fc000000)
    Built 1 zonelists in Zone order. Total pages: 15240
    Kernel command line: root=/dev/hda3 devfs=mount kbd-reset xbox=hdd
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 256 (order: 8, 1024 bytes)
    Detected 733.370 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Memory: 57652k/61440k available (1764k kernel code, 3380k reserved, 470k data, 136k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffffb000 - 0xfffff000 ( 16 kB)
    vmalloc : 0xc4800000 - 0xffff9000 ( 951 MB)
    lowmem : 0xc0000000 - 0xc3c00000 ( 60 MB)
    .init : 0xc0332000 - 0xc0354000 ( 136 kB)
    .data : 0xc02b90ae - 0xc032ea60 ( 470 kB)
    .text : 0xc0100000 - 0xc02b90ae (1764 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1467.98 BogoMIPS (lpj=2935965)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
    Compat vDSO mapped to ffffe000.
    CPU: Intel Celeron (Coppermine) stepping 0a
    Checking 'hlt' instruction... OK.
    NET: Registered protocol family 16
    PCI: Using configuration type 1
    Setting up standard PCI resources
    SCSI subsystem initialized
    libata version 2.21 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Cannot allocate resource region 7 of bridge 0000:00:08.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:08.0
    PCI: Cannot allocate resource region 9 of bridge 0000:00:08.0
    PCI: Bridge: 0000:00:08.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Failed to allocate mem resource #2:80000@f8000000 for 0000:01:00.0
    PCI: Failed to allocate mem resource #6:10000@f8000000 for 0000:01:00.0
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: fd000000-fdffffff
    PREFETCH window: f0000000-f7ffffff
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    NET: Registered protocol family 2
    Time: tsc clocksource has been installed.
    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 325k freed
    Enabling Xbox eject problem workaround.
    fuse init (API version 7.8)
    io scheduler noop registered
    io scheduler deadline registered (default)
    io scheduler cfq registered
    xboxfb: nVidia device/chipset 10DE02A0
    xboxfb: Detected 64MB of system RAM
    xboxfb: Using 4M framebuffer memory
    i2c-xbox.o version 0.0.1
    i2c-xbox.o: Found nVidia XBOX nForce SMBus controller.
    i2c-xbox.o: SMBus bus detected and initialized
    xbox-tv-i2c: Using 'SMBus adapter at c000'!
    xboxfb: Setting TV mode from EEPROM (NTSC)
    xboxfb: detected conexant encoder
    xboxfb: Setting cable type from AVIP ID: HDTV (Component video)
    xboxfb: RIVA MTRR set to ON
    Console: switching to colour frame buffer device 80x30
    xboxfb: PCI nVidia NV20 framebuffer ver 0.9.5b-xbox (XboxGeForce3, 4MB @ 0xF3C00000)
    Real Time Clock Driver v1.12ac
    Linux agpgart interface v0.102
    [drm] Initialized drm 1.1.0 20060810
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: module loaded
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    eth0: forcedeth.c: subsystem: 00000:0000 bound to 0000:00:04.0
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    NFORCE: IDE controller at PCI slot 0000:00:09.0
    NFORCE: chipset revision 212
    NFORCE: not 100% native mode: will probe irqs later
    NFORCE: 0000:00:09.0 (rev d4) UDMA100 controller
    ide0: BM-DMA at 0xff60-0xff67, BIOS settings: hda:DMA, hdb:DMA
    Probing IDE interface ide0...
    hda: WDC WD2500JB-00FUA0, ATA DISK drive
    hdb: PHILIPS XBOX DVD DRIVE, ATAPI CD/DVD-ROM drive
    hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
    hda: selected mode 0x42
    hdb: selected mode 0x42
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hda: max request size: 512KiB
    hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
    hda: cache flushes supported
    hda: hda1 hda2 hda3 hda4
    hdb: ATAPI DVD-ROM drive, 128kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:02.0: irq 1, io mem 0xfed00000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    PCI: Setting latency timer of device 0000:00:03.0 to 64
    ohci_hcd 0000:00:03.0: OHCI Host Controller
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.0: irq 9, io mem 0xfed08000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    USB Universal Host Controller Interface driver v3.0
    mice: PS/2 mouse device common for all mice
    i2c /dev entries driver
    usb 1-3: new low speed USB device using ohci_hcd and address 2
    usb 1-3: configuration #1 chosen from 1 choice
    input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input0
    usbcore: registered new interface driver usbkbd
    drivers/hid/usbhid/usbkbd.c: :USB HID Boot Protocol keyboard driver
    usbcore: registered new interface driver usbmouse
    drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
    TCP cubic registered
    drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    Freeing unused kernel memory: 136k freed
    ReiserFS: hda3: found reiserfs format "3.6" with standard journal
    ReiserFS: hda3: using ordered data mode
    ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda3: checking transaction log (hda3)
    ReiserFS: hda3: Using r5 hash to sort names
    NET: Registered protocol family 1
    spurious 8259A interrupt: IRQ7.
    udev: starting version 141
    df -h after "mount -a":
    Filesystem Size Used Avail Use% Mounted on
    /dev/disk/by-uuid/b0b958c4-5f24-414a-8826-6df956f0815b
    7.4G 2.1G 5.3G 29% /
    /dev/hda1 99M 11M 83M 12% /boot
    /dev/hda4 226G 39M 226G 1% /home
    Ok, something is definately wrong there, only root is by-uuid
    blkid:
    /dev/hda3: UUID="b0b958c4-5f24-414a-8826-6df956f0815b" TYPE="reiserfs"
    /dev/hda2: TYPE="swap" UUID="2767f772-203a-4fe9-ac4d-7c8754abc4c8"
    /dev/hda4: UUID="e83b7114-86fe-4e8f-9e95-0d92b8e50d1a" TYPE="reiserfs"
    /dev/hda1: UUID="728c65f2-a84f-401f-9899-17020758b829" SEC_TYPE="ext2" TYPE="ext3"
    Should I try newer udev? Can I even use the latest with 2.6.23?

    Mounting Local Filesystems fails
    Mount: Special device /dev/disk/by-uuid/728c65f2-a84f-401f-9899-17020758b829 does not exist
    Mount: Special device /dev/disk/by-uuid/e83b7114-86fe-4e8f-9e95-0d92b8e50d1a does not exist
    so does Activating swap.
    still, ls -la /dev/disk/by-uuid/ gives me:
    lrwxrwxrwx 1 root root 10 2010-10-02 22:45 2767f772-203a-4fe9-ac4d-7c8754abc4c8 -> ../../hda2
    lrwxrwxrwx 1 root root 10 2010-10-02 22:45 728c65f2-a84f-401f-9899-17020758b829 -> ../../hda1
    lrwxrwxrwx 1 root root 10 2010-10-02 22:45 b0b958c4-5f24-414a-8826-6df956f0815b -> ../../hda3
    lrwxrwxrwx 1 root root 10 2010-10-02 22:45 e83b7114-86fe-4e8f-9e95-0d92b8e50d1a -> ../../hda4
    should I have /boot and /home in /dev?
    Full system upgrade gave me the same issue. Even after udev downgrade (udev-142 is the latest I can use with 2.6.23).
    Edit:
    Changed my fstab back from by-uuid to hdaX, didn't help. Strangely all hdaX are in /dev/ after boot, but the symlinks are missing.
    Last edited by TelaKeppi (2010-10-02 21:22:53)

  • Authorisation checks failed

    Hi Guys
    A Problem has come in picture: I ran su53 and it ended with error for some users.
    This all has come in picture after we applied SP to SAP System.
    Authorisation check failed
       Object class BC_C Basis - Developement Environemnt
         Authorisation Ojb.S_TransLAT Translation environment ojbect
          Authorisation field ACTVT Activity
                                         02
          Authorisation filed TLANGUAGE Target Language
                                         E
          Authorisation field TRANOBJ Translation : Text type name
    Can anyone aware of this error?
    Regards
    Ricky
    Edited by: Ricky kayshap on Oct 14, 2008 4:56 PM

    Hi Ricky,
    You had said earlier that the SU53 had ended with errors for some users.What i wanted to say is that if you could check for those users if they are missing the authorizations as shown in SU53 in their user profile.
    For finding out the same.
    Go to SUIM
    Roles by complex search criteria
    In the field "User" give the user name i.e PASCOAJ
    Scroll down to the section "Selection according to authorization values"
    Enter the name of the auth. obj in the field "Object 1" i.e S_TRANSLAT
    Click on the button "Entry Values" and then in the respective fields below enter the values as per the SU53 error that you are getting.
    Then Execute.
    If the user PASCOAJ has this authorization avaliable in his user profile then the result would display the name of the roles through which he is getting the access or else it will display at the bottom "no data was selected" which would mean that the user does not have this particular authorization.
    You will then have to find out the appropriate roles if existing in your landscape with this authorization which can be assigned to the user without any SOD conflicts.
    Thanks,
    Saby..

  • [Solved (initscripts-splash plroblem)] Filesystem check failed

    Hello, my arch i686 sudently doesn't boot.
    At system start, after loading kernel, the boot process stops and says "FILESYSTEM CHECK FAILED" give root password for maintenance or control+D for restart.
    My root partition (dev/sda2) is reiserfs formated, and arch updated this week.
    After reading a while I booted with Arch install CD and tried the follwing:
    fsck.reiserfs --check /dev/sda2
    fsck.reiserfs --fix-fixable /dev/sda2
    fsck.reiserfs --rebuild-sb /dev/sda2
    fsck.reiserfs --clean-attributes /dev/sda2
    But no errors were found or fixed, so I can't boot arch yet.
    Are there any other way to fix the filesystem?
    can filesystem check be skipped?
    please help
    Last edited by juan_sck (2008-10-13 11:09:17)

    Mektub wrote:
    Could it be that it is anoter partition that is giving trouble ? Ot do you only have /dev/sda2 ?
    Or start in sinle-user. At the grub boot menu, select the option that lets you edit the kernel parameters.
    Add either a '1' or 'single' to the end of the kernel parameters, then continue booting up.
    Mektub
    of course I know where I installled Arch.
    pointone wrote:There should be a more descriptive error message above where it says "filesystem check failed" describing WHY the fsck failed.
    No, just system check failed. Even more, my filesystem was perfectly, it was a problem with initscripts-splash
    iDeJ wrote:
    i had a similar problem after the last pacman -Syu, basicly the bootsplash-initscripts are not compatible with latest udev
    maybe it helps
    http://bbs.archlinux.org/viewtopic.php?id=56604
    I don't think installing a year old initscripts package would solve it, but you were very helpful.
    Finally I could solve it with the recovery console:
    After the error message I typed root password to log in, then remounted root partition for r/w:
    mount -n -o remount,rw /
    Finally I had to remove the package initscripts-splash and install initscripts form core.
    ifconfig eth0 up
    dhcpcd eth0
    pacman -Syu
    pacman -Rs initscripts-splash
    pacman -S initscripts
    exit
    **You should make a backup of rc.conf before installing initscripts, because installing initscrips will overwrite it (and a few other files i hadn't modified), and pacman was supoussed to back it up, but it didn't
    thanks for your help.

  • How To Create A Technical And Business Systems For Web AS ABAP ???

    Hi Experts,
    How To Create A Technical And Business Systems For Web AS ABAP ???
    Please Let me Know All the Step-By-Step Process to Create ????
    Points Will be Given
    Regards
    Khanna

    Hi Sumit,
    When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
    So I got An Entry for the Technical System for XI System.
    Now i Deleted that and Executed RZ70 in R/3.
    When I Executed RZ70, I got this Error.
    <b> "RFC Call failed: Error Opening an RFC Connection "</b>.
    Now I am Unable to see Any Technical System  Under Web As ABAP. It's Showing Empty Now.
    Please Let me know
    Regards
    Khanna

  • Related Integration server for Business System  in SLD

    HI All,
    IN SLD we have one Technical System for PI and one TS for R/3 System.
    When I crating Business System for R/3 in R/3 TS, in Integration Tab what I have to select for Related Integration Server option.
    It is having None and Business System of PI TS System.
    Please help me in this.
    Regards,
    Sree

    Hey
    Looks like you are defining this Business system as a Integration server.
    See here is what you need to do.
    Step 1:First of all create a business system for XI system itself,this business system will have details of XI system and its role will be Integration server.You can have only 1 Integration server(hence you are getting the error).
    Step 2:Now define a business system of type Web as ABAP for R/3 system,this system will have role as Application system but the related integration server will be the name of the business system of PI system(the one which you defined in Step 1).
    As of now,are you getting any business system name in the drop down box for related integration server while creating business system for R/3 in SLD?
    If yes,then simply select that
    Thanx
    Aamir

Maybe you are looking for

  • 3-d surface graphs in Linux LV 8.6

    I need to draw a surface graph from data where the z axis can take one of 14 values and the (x,y) coordinates range from 0 to 1, with no fixed intervals.  In essence, I have 14 horizontal slices of a surface, with 50 random surface observations on ev

  • HT204266 How to check my iPhone5 from which country?

    As the tittle above,can anyone teach me to check my iPhone5 from which country?Thank you.

  • 2 concurrent VPN connections

    ISP: Comast Broadband LinkSys Wireless Router: SRX200 (WRT54GX2) PCs: 2 Dell laptops, D410 & D600 PC Connections: Each laptop works wired or wirelessly to access Internet Problem statement: When my wife an dI both work from home, we can only maintain

  • Retrieve custom property for a user

    Within a custom portlet, how would I obtain custom properites of the current user viewing the portlet? For example, if a user had property "Favorite Food" populated and I wanted my portlet to display recipes using his/her favorite food.

  • Transparent areas on New Site Dialogue Box

    Hi everyone. I have a problem with Deamweaver CS5 showing various transparent areas (start up box etc.) but the biggest problem is with the New Site and Edit Site dialogue boxes - they are unuseable. The image below shows the New Site dialgue box sho