CHARM and System Copy (Database Copy)

Dear All,
Does anyone have experience on managing System Copy (Database Copy) on the SAP Landscape which are implementing Centralize CHARM on Solution Manager?
<b><u>Case:</u></b>
Transport route : DEV --> QAS --> PRD
CHARM centralize managed in: SLM.
Now, QAS will be refreshed from PRD (by Database Copy) .
How to ensure the following will be kept consistence:
1. IMG Status on satelite systems
2. SMI Project data linked to satelite systems
3. Support Desk data (Support/notification messages, Business
Partner,iBase,etc) related with CHARM linked to satelite systems
4. Status of SMI Project cycle data linked to satelite systems
I have tried it on Simulation landscape, seems many manually steps need to be done (eg. Redo all RFC definitions to the refreshed system) and some of above data are inconsistence ..
Thanks and regards,
Hery

Dear Hery,
Please refer to SAP Note 985692 "Copying a satellite system: Change
Management". This note provide all the required information.
I hope that it answers most of your queries as well.
Regards
Amit

Similar Messages

Acitivites R/3 quality and BW qualilty in case of System copy(database )

Hi,
We have carried out system copy (database copy ) to refresh r/3 qualtiy server from r/3 production server.
client no of r3/ qulaity is same (earlier it was 500 and and after system copy also it is ketp same ie 500).
Now we want to know what are the acitivites that are required to be carried out in R/3 quality and BW quality as we want to refesh data in bw quality.
we already have source system RQ1CLNT500 in BW under SAP node and on running check connection option it show message "source system connection RQ1CLNT500 OK.
But still when we want to fetch data in PSA it shows following message
"No transfer structure is available for InfoSource 0FS_PORTFOL_TEXT in the source system"
can anybody guide us to solve the problem
Thanks and Regards
Deepak Deshpande
LIC of India,

Hi ,
This is common issue comes due to upgrade /system copy .
      This is caused because table ROOSGEN does not contain an entry for the erroneous Datasource.
      The entries in ROOSGEN table are generated in $TMP (Temporary package) and sometimes after upgrade, they disappear.
      It happen if the extract structure of a DataSource gets a new timestamp we often enhance DataSources between different releases,upgrades .
     so the normal procedure should be to replicate the DataSources into BW in order to get the currently valid set of metadata. Solution:
In case of 7.0 DataSources, you need to reactivate them by using the program RSZ_DATASOURCES_ACTIVATE_ALL and if the issue occurs for few datasources, they can be activated manually also.
regards,
Jaya Tiwari

Differences between client copy with sap_all and database copy

What's the difference between client copy with sap_all and doing a database copy.
I know if I do a database copy from Production to our Quality system.
I need to install the license key
restore the production library to the quality library
Initialize TMS and so on.
I know if I want to copy to our Development system. I would need to run either a remote client copy or and export/import since I cannot do a database copy because I would loose all my other clients in Development.
My question is, if the quality systems and the production systems are on the same support packs, same kernel.
What does a database copy give you (besides being faser) that a remote client copy or export/import of a client copy does.
Any differences
Thanks
Joe

Hello Joe,
If there is inconsistent Z tables between QAS and PRD, remote client copy could fail, especially when the table on PRD has longer length or more fields than the one on QAS.
Also the source client should has no-activity during the client copy, otherwise the application data could be inconsistent. For example, some material documents are copied, but not the corresponding financial documents. (For PRD client, it could be hours between the times those tables are copied.) For database restore, it is rarely an issue.
Best regards,
Victor

Database copy is failed and suspended

Hi Everyone,
My environment is Exchange server 2010 sp3, two sites one denver one houston, 2 DAGs and DR server of each DAG is placed on the second DAG.
Scenario is
Site 1:denmbx1,denmbx2 and den1 are hosted on denver DAG01
Site 2: HOUmbx1,HOUmbx2 and HOU1 are hosted on DAG02
We've had outage few days back and now one mailbox database copy on one DR server is FAILED and SUSPNEDED while rest of the databases are Fine.
Now i cannot resume and update this database copy.
CAn anyone please help on this?
Thanks.

Hi,
You can reseed database copy manually to check result. You need to dismount the active copy of the database and copy the database file (EDB file) to the same location on Mailbox server in
the DR site. If you use this method, there will be an interruption in service because the process requires you to dismount the database.
1. If circular logging is enabled for the database, it must be disabled before proceeding.
2.
On the server who holds the active copy of the mailbox database, dismount this mailbox database.
3.
Verify that database is in a Clean Shutdown state.
4.
If it is Dirty Shutdown, we must use the command “ESEUTIL /r” to manually recover the database.
5.
Copy the edb file to passive node to the same path as the active database copy.
6. Perform seeding operation using following command:
Update-MailboxDatabaseCopy -Identity "database name / server name"
To check if the above steps finished successfully. We could run the following command to check the mailbox database copy status:
Get-MailboxDatabase| Get-MailboxDatabaseCopyStatus
Here is a related article for your reference.
http://technet.microsoft.com/en-gb/library/dd351100(v=exchg.141).aspx
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

Database copy dropped objects in source schema

I was seeking out a quick way to copy an entire schema from one db to another and I was happy when I found the "database copy" feature. I checked the documentation and found that all I needed to do was select the source connection, the target connection, and choose either create, truncate, or drop objects. Well I had some objects in the source db from a previous failed attempt at copying all the objects via script. To remedy that the drop objects option, according to the documentation " Drops any existing table with the same name, and then creates and loads it from the source." Ok, great. The summary shows up with a bunch of entries which I didn't pay too much attention too. Fine, continue...running....progress...so far so good..and the log shows up. I see drops, I see moving data, and I see a whole bunch of errors with no useful information with them. Check the target schema...nothings there, all objects are dropped. Ok, lets have a look at the source and see whats going on. Refresh tables...nothing...refresh...refresh...nothing. The source schema has all its objects GONE too! One lonely type is saved in the source schema, that's it. Am I a total moron and misinterpreting how database copy works? Can anyone shed some light on this? Anyway to recover my source objects? As the source db is not production I am out of luck as there is no recent backup.
Source: 9i
Target: 11g
sql developer v 2.1.1.64.45
-j

OK the problem was that my target connection was inadvertently pointing to the source. It was set properly before but stuff went bad and i switched the connection from TNS to basic, then back to TNS. Apparently when switching back to TNS the wrong entry was selected. Not sure if I chose it or it was selected from a different connection. In any case, very stupid of me.
thanks K.
Edited by: [email protected] on Jun 17, 2010 6:45 AM

Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG

Hello Team
is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing and deleting the mailbox database copies in exchange 2010
normaly procedure is
Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?

From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another. Your note
about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
add a database copy on that third server? Once it is fully seeded, you can remove the current passive copy. This way, you never lose your redundancy.
Yes i can add the third and fourth serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
and also currently my lab setup is two member dag (with a server hosting your active database,
and a second hosting the passive copy) in the same site named SITE A
and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
i want the mailbox database copies from the mailbox server database in SITE A to
Mailbox server database in SITE B as passive copy
That is why i want to move the mailbox database without deleting / removing it manually
Hope you understand my situation!

Cannot Adding Mailbox Server for Database Copy for Exchange 2013 SP1

Before I upgraded to 2013 SP1 everything works find but after I upgrade to SP1 I cannot add database copy. the details are...
I have 2 sites
Site 1 : 4 Mailboxes (Mailbox01,Mailbox02,Mailbox03,Mailbox04)   + 2 CAS
Site 2 : 2 Mailboxes (Mailbox05,Mailbox06)   + 2 CAS (just for standby site)
So I have 2 DAG group  (6 Mailboxes separate to 3 Mailboxes for 1 DAG group Mailbox01,Mailbox02,Mailbox05 for DAG1 and Mailbox03,Mailbox04,Mailbox06 for DAG2)
After I upgrade Exchange 2013 to SP1 , I try to create new database on Mailbox01 and after that I try to add mailbox02 and mailbox05 to database copy of new database that I created.
"Mailbox05 can added to be database copy but Mailbox02 cannot add database copy for it , Error "Network path not found" occur" but Im very sure that path is the same for each mailbox database server.
so I try to create new database on Mailbox 03 and add database copy on mailbox04 and mailbox06.... the result is the same only Mailbox06 can add mailbox copy of database.
It look like I cannot have 2 mailbox in site 1 for database copy of each new database (I already try to create new database on Mailbox 02 and add database copy on mailbox01 and mailbox05 , the result is only mailbox05 can be database copy of database).
Please help me to fix this out.

Hi,
I recommend you check if the Remote Registry service is running on Mailbox01, Mailbox02, Mailbox03 and Mailbox04. If not, please start it and then add mailbox database copy to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Client Copy and System Restore query

Dear All,
I have few major doubt regarding client copy and system restor.
1. In my Quality system there are 2 clients: 100 and 200.In my PRD there is only 1 client 300(other than the standard default clients). My doubt is during remote client copy with SAP_ALL profile from PRD to QUA why the space increases only in MB.
I have been asked the same question by my management. They are saying PRD is 300GB and QUA is 220GB then why the space increases in MB though all data is copied in client 200(QUA) from client300(PRD)
2. If I delete client why the space is released in MB. Because according to them it should be in GBs.
3. Now my third query is I have to restore PRD backup in QUA.So I said that this requires same <SID> and Same sapce in the sapdatafiles(OS is HP-UX 11.31 and DB is Oracle 10g).So I have to explain them why these two things are contradary to each other. In case of client copy space required is only in MB and in case of System restore of PRD in QUA sapce require is in GBs.
Your suggestions will be highly obliged.
Regards,
PG

1. In my Quality system there are 2 clients: 100 and 200.In my PRD there is only 1 client 300(other than the standard default clients). My doubt is during remote client copy with SAP_ALL profile from PRD to QUA why the space increases only in MB.
Response > Because during client copy your customizing and other objects are copied.
The database structures,tables etc are already present.
2. If I delete client why the space is released in MB. Because according to them it should be in GBs.
Response > Since client deletion is not same as deleting database /customizing tables .If you delete complete dataspaces/tables then there will be sizeable difference.Similar logic as Response 1
3. Now my third query is I have to restore PRD backup in QUA.So I said that this requires same <SID> and Same sapce in the sapdatafiles(OS is HP-UX 11.31 and DB is Oracle 10g).So I have to explain them why these two things are contradary to each other. In case of client copy space required is only in MB and in case of System restore of PRD in QUA sapce require is in GBs.
Response > Since in a system copy you will copy data files (which includes tables,and all otehr strucutres ) hence the size required will be similar to PRD.

Javascript error in BEx after system database copy

Hello,
we made a database copy of our BW 3.1 system on another hardware. After having done everything described in the How-To-Guide "Enable SAP BW Web functionality", we called the BEx via URL. The login screen displays and also the Report menu, but there occur JavaScript errors on the page, that didn't occur in the copy master. E.g.
"SAPBWSSgdo is null or not an object" or
"SAPBWItemCatalog undefined".
These errors prevent the choice menu for BW report value options to be displayed, which is quite annoying. Does anybody know where the error might come from? Are there any components required by BEx which weren't copied with the database copy?
Thanks for your help in advance,
Volker Hofmann

Hi Beat,
thanks you're helping me! The MIME-Repository objects like JS-Files, stylesheets and images can be read. The strange thing is:
The J2EE engine is hosted by a provider. When they're calling the BEx web reports, they're displayed correctly. But when we call them (via proxy!), the error occurs. Even the application management doesn't know where the error comes from, after having checked if the proxy caches old data. The error is still not resolved...
Do you have another idea?
Regards,
Volker

What are Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina Joshi

Hi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
     -- Hardware Sizing
     -- Preparation of Data Centres
     -- HANA Hardware preparation
     -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
     -- House Keeping activities on BW system (data clean up, etc)
Post Installation:
     -- Sanity checks / Preparation and License checks
     -- JAVA Configurations
     -- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
     -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
               - ZBW_HANA_COCKPIT Tool
               - ZBW_HANA_CHECKLIST Tool
               - ZBW_ABAP_ANALYZER Tool
               - ZBW_TRANSFORM_FINDER Tool
               - SIZING Report
               - System Clean up Activities
               - Impact of 7.4 on source system checks
               - Java Upgrade for portal
# DMO Stages
               - Preparation & Pre Migration checks
               - Execution / Migration
               - Post Migration Activities
# Testing Phase
               - Source system checks/Activities
               - System and Integration Testing
               - End to End Testing
               - Performance testing
               - Reports
               - BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren

System copy with Export/Import Distribyted system UNIX database, Windows CI

HI
we have a distributed system witch I want to make a copy of
Oracle Database on HP-UX
CI + SCS on Windows
Dual stack system ABAP/Java
1) I have made an system copy with data base copy tools, and that works fine.
2) I have made a system copy export/import of a "central system"
If I try to make an export/import system copy on a distributed system it wont work.
( this work fine in a central system) I dont get anny error messages all gren checks marks !
It seems like the problem are in not finding the profiles from CI ?
It find the profiles for the sapgateway.
I someone are more interested I have more documentation with screen shots in a word document.
I Have used Installation Master SR3 and tryed with some older versions as well.
I have read SAP Note 970518 - Hom./Het.System Copy SAP NetWeaver 7.0 (2004s) SR2
SAPINST
Using virtual hosts for central and/or DB instances
SYMPTOM:
You are using virtual host names for your central instance and/or the database instance (e.g. in a HA environment). Although SAPinst finishes successfully, some export steps are not being performed.
SOLUTION:
Start the export with the property SAPINST_USE_HOSTNAME=<virtual host>.
If the central instance and the database instance run on different hosts, run the database export with SAPINST_USE_HOSTNAME=<virtual host name of the DB server> and - if you run a Java or ABAP+Java system - run the central instance export with SAPINST_USE_HOSTNAME=<virtual host nameof the central instance host>.
If you run a central system with different host names in the profiles, handle the export as a distributed export, calling SAPinst with parameter SAPINST_USE_HOSTNAME. Perform the export of the database instance on the DB server, calling SAPinst with SAPINST_USE_HOSTNAME=<virtual host of the DB server>.

Hi I have received folloving answer from SAP:
You're doing everything correct - besides one thing.
When you specify the profiles during the database export it cannot be
correct to specify the profiles of the gateway instance located on
the same host.
As a consequence - it picks up the wrong instance G01 and sets the
property 'hasABAP' and 'hasJava' to 'false'... - thus the export
is empty. You can see this within the corresponding 'sapinst.log' file.
The correct procedure would be to specify the profiles of the central
instance on the Windows Machine. If you cannot access them, you should
make them available by Samba or by any type of software which makes
it's possible to export filesystems or directories from windows to
unix.
Best regards
Bent

How to Create a database copy and specify the source database.

Hello,
In my dag environment I would like to create a new database copy and specify the source. My company has database copies in 2 locations. Instead of transferring the data from one location to the other, I would like to specify the source be the copy that is
in the same location.
Thank you,
~Mark

Hi,
We can create a mailbox database, then run EMC and EMS to create a database copy.
More details about Add a Mailbox Database Copy, for your reference:
https://technet.microsoft.com/en-us/library/dd298080(v=exchg.141).aspx
Note: please pay attention to Prerequisites section, for example:
1. The specified Mailbox server must not already host a copy of the specified mailbox database.
2. The server hosting the specified database and the server that will host the database copy must both be in the same database availability group (DAG). The DAG must also have quorum and be healthy.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks? What do I need to do dif

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks?
What do I need to do differently?

The late, great Pondini was investigating that issue before he passed away.
See here: https://discussions.apple.com/thread/5125969
I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

Event:4133 "Database one datacenter health check failed". and Event:4376 "Database one datacenter available copy health check failed"

Hi.
I got two DAG nodes with CAS role installed. Sudently i get this failures on both nodes. This happens for all databases. I have tried do Seed the DB, with no luck
I run the The CheckDatabaseRedundancy.ps1 script and this seems OK.
Could somone please help me,
[PS] D:\Program Files\Microsoft\Exchange Server\V15\Scripts>.\CheckDatabaseRedundancy.ps1
DatabaseName                        : Users05
LastRedundancyCount                 : 0
CurrentRedundancyCount              : 2
LastState                           : Unknown
CurrentState                        : Green
LastStateTransitionUtc              : 05.07.2013 05:49:10
LastGreenTransitionUtc              : 05.07.2013 05:49:10
LastRedTransitionUtc                :
LastGreenReportedUtc                : 05.07.2013 05:49:10
HasReportedGreenEvent               : True
LastRedReportedUtc                  :
PreviousTotalRedDuration            : 00:00:00
TotalRedDuration                    : 00:00:00
IsTransitioningState                : True
HasErrorsInHistory                  : False
CurrentErrorMessages                :
ErrorHistory                        :
IsOneDatacenter                     : False
CurrentRedundancyCountPerSite       : {[Default-First-Site-Name, 2]}
CurrentSearchRedundancyCountPerSite : {[Default-First-Site-Name, 2]}
Event:4376
Database one datacenter available copy health check failed.
Database copy: Users05
Redundancy count: 2
Error:
================
Full Copy Status
================
Database Copy : Users05\casmbx02
VolumeInfoLastError                  :
LogPathIsOnMountedFolder             : False
LogVolumeName                        : \\?\Volume{beecae05-53ca-444d-ab5f-dd98510b4776}\
LogVolumeMountPoint                  : E:\
DatabasePathIsOnMountedFolder        : False
DatabaseVolumeName                   : \\?\Volume{b92c9520-905f-4ee4-902d-1e73c26b1717}\
DatabaseVolumeMountPoint             : F:\
ExchangeVolumeMountPoint             :
LastDatabaseVolumeNameTransitionTime : 01.01.1601 00:00:00
LastDatabaseVolumeName               :
DiskFreeSpacePercent                 : 90
DiskTotalSpaceBytes                  : 107237863424
DiskFreeSpaceBytes                   : 97164902400
SeedingSource                        : False
ActivationPreference                 : 2
LogsCopiedSinceInstanceStart         : 45
LogsReplayedSinceInstanceStart       : 86
ExtendedErrorInfo                    :
ErrorEventId                         : 0
ErrorMessage                         :
ReplayQueueNotKeepingUp              : False
CopyQueueNotKeepingUp                : False
SnapshotLatestCopyBackup             : False
SnapshotLatestDifferentialBackup     : False
SnapshotLatestIncrementalBackup      : False
SnapshotLatestFullBackup             : True
LatestCopyBackupTime                 : 01.01.1601 00:00:00
LatestDifferentialBackupTime         : 01.01.1601 00:00:00
LatestIncrementalBackupTime          : 01.01.1601 00:00:00
LatestFullBackupTime                 : 04.07.2013 19:31:34
LastLogCopyNotified                  : 4100
CurrentReplayLogTime                 : 05.07.2013 05:24:26
LastReplayedLogTime                  : 05.07.2013 05:39:26
LastInspectedLogTime                 : 05.07.2013 05:39:26
LastCopiedLogTime                    : 05.07.2013 05:39:26
LastLogInfoFromClusterGen            : 4100
LastLogInfoFromClusterTime           : 05.07.2013 05:44:01
LastLogInfoFromCopierTime            : 05.07.2013 05:44:00
LastLogInfoIsStale                   : False
LastCopyNotifiedLogTime              : 05.07.2013 05:39:26
LatestAvailableLogTime               : 05.07.2013 05:39:26
DumpsterEndTime                      : 01.01.0001 00:00:00
DumpsterStartTime                    : 01.01.0001 00:00:00
DumpsterRequired                     : False
DumpsterServers                      :
ActionInitiator                      : Service
SuspendComment                       :
SinglePageRestoreNumber              : 0
SinglePageRestore                    : False
ReplayLagPercentage                  : 0
ReplayLagPlayDownReason              : None
ReplayLagEnabled                     : Disabled
ReplayLagDisabledReason              :
ActualReplayLagTime                  : 00:04:40.1554322
ConfiguredReplayLagTime              : 00:00:00
NodeStatus                           : Up
WorkerProcessId                      : 8740
ReseedBlocked                        : False
ResumeBlocked                        : False
ReplaySuspended                      : False
LostWrite                            : False
Viable                               : True
ActivationSuspended                  : False
DbSeedingKBytesWrittenPerSec         : 0
DbSeedingKBytesReadPerSec            : 0
DbSeedingKBytesWritten               : 0
DbSeedingKBytesRead                  : 0
DbSeedingPercent                     : 0
ContentIndexSeedingSource            :
ContentIndexSeedingPercent           :
ContentIndexMailboxesToCrawl         :
ContentIndexBacklog                  : 0
ContentIndexRetryQueueSize           : 0
ContentIndexErrorMessage             :
ContentIndexStatus                   : Healthy
LastStatusTransitionTime             : 04.07.2013 17:46:02
InstanceStartTime                    : 04.07.2013 17:45:59
CICurrentness                        : Current
CopyStatus                           : Healthy
ServerVersion                        : 1941996140
LastLogReplayed                      : 4100
LastLogInspected                     : 4100
LastLogCopied                        : 4100
LastLogGenerated                     : 4100
DataAvailabilityTime                 : 05.07.2013 05:39:26
DataProtectionTime                   : 05.07.2013 05:39:26
LastLogGeneratedTime                 : 05.07.2013 05:44:06
StatusRetrievedTime                  : 05.07.2013 05:44:06
ActiveDatabaseCopy                   : CASMBX01
MailboxServer                        : CASMBX02
DBName                               : Users05
DBGuid                               : 57da90db-bc6d-4bf3-b508-64d3bff41377
Database Copy : Users05\casmbx01
VolumeInfoLastError                  :
LogPathIsOnMountedFolder             : False
LogVolumeName                        : \\?\Volume{94937623-3da4-49ab-825e-49c982ec79f1}\
LogVolumeMountPoint                  : E:\
DatabasePathIsOnMountedFolder        : False
DatabaseVolumeName                   : \\?\Volume{73a9913d-1660-487b-8a8b-b53cb017728e}\
DatabaseVolumeMountPoint             : F:\
ExchangeVolumeMountPoint             :
LastDatabaseVolumeNameTransitionTime : 01.01.1601 00:00:00
LastDatabaseVolumeName               :
DiskFreeSpacePercent                 : 90
DiskTotalSpaceBytes                  : 107237863424
DiskFreeSpaceBytes                   : 96646443008
SeedingSource                        : False
ActivationPreference                 : 1
LogsCopiedSinceInstanceStart         : 0
LogsReplayedSinceInstanceStart       : 0
ExtendedErrorInfo                    :
ErrorEventId                         : 0
ErrorMessage                         :
ReplayQueueNotKeepingUp              : False
CopyQueueNotKeepingUp                : False
SnapshotLatestCopyBackup             : False
SnapshotLatestDifferentialBackup     : False
SnapshotLatestIncrementalBackup      : False
SnapshotLatestFullBackup             : True
LatestCopyBackupTime                 : 01.01.1601 00:00:00
LatestDifferentialBackupTime         : 01.01.1601 00:00:00
LatestIncrementalBackupTime          : 01.01.1601 00:00:00
LatestFullBackupTime                 : 03.07.2013 19:30:53
LastLogCopyNotified                  : 4100
CurrentReplayLogTime                 : 01.01.0001 00:00:00
LastReplayedLogTime                  : 01.01.0001 00:00:00
LastInspectedLogTime                 : 01.01.0001 00:00:00
LastCopiedLogTime                    : 01.01.0001 00:00:00
LastLogInfoFromClusterGen            : 4100
LastLogInfoFromClusterTime           : 05.07.2013 05:44:01
LastLogInfoFromCopierTime            : 05.07.2013 05:44:06
LastLogInfoIsStale                   : False
LastCopyNotifiedLogTime              : 05.07.2013 05:39:26
LatestAvailableLogTime               : 01.01.0001 00:00:00
DumpsterEndTime                      : 01.01.0001 00:00:00
DumpsterStartTime                    : 01.01.0001 00:00:00
DumpsterRequired                     : False
DumpsterServers                      :
ActionInitiator                      : Unknown
SuspendComment                       :
SinglePageRestoreNumber              : 0
SinglePageRestore                    : False
ReplayLagPercentage                  : 0
ReplayLagPlayDownReason              : None
ReplayLagEnabled                     : Disabled
ReplayLagDisabledReason              :
ActualReplayLagTime                  : 00:00:00
ConfiguredReplayLagTime              : 00:00:00
NodeStatus                           : Up
WorkerProcessId                      : 7624
ReseedBlocked                        : False
ResumeBlocked                        : False
ReplaySuspended                      : False
LostWrite                            : False
Viable                               : False
ActivationSuspended                  : False
DbSeedingKBytesWrittenPerSec         : 0
DbSeedingKBytesReadPerSec            : 0
DbSeedingKBytesWritten               : 0
DbSeedingKBytesRead                  : 0
DbSeedingPercent                     : 0
ContentIndexSeedingSource            :
ContentIndexSeedingPercent           :
ContentIndexMailboxesToCrawl         :
ContentIndexBacklog                  : 0
ContentIndexRetryQueueSize           : 0
ContentIndexErrorMessage             :
ContentIndexStatus                   : Healthy
LastStatusTransitionTime             : 01.01.0001 00:00:00
InstanceStartTime                    : 04.07.2013 17:45:58
CICurrentness                        : Current
CopyStatus                           : Mounted
ServerVersion                        : 1941996140
LastLogReplayed                      : 0
LastLogInspected                     : 0
LastLogCopied                        : 0
LastLogGenerated                     : 4100
DataAvailabilityTime                 : 01.01.0001 00:00:00
DataProtectionTime                   : 01.01.0001 00:00:00
LastLogGeneratedTime                 : 01.01.0001 00:00:00
StatusRetrievedTime                  : 05.07.2013 05:44:06
ActiveDatabaseCopy                   : CASMBX01
MailboxServer                        : CASMBX01
DBName                               : Users05
DBGuid                               : 57da90db-bc6d-4bf3-b508-64d3bff41377
Event:4133
Database one datacenter health check failed.
Database copy: Users05
Redundancy count: 2
Error:
================
Full Copy Status
================
Database Copy : Users05\casmbx02
VolumeInfoLastError                  :
LogPathIsOnMountedFolder             : False
LogVolumeName                        : \\?\Volume{beecae05-53ca-444d-ab5f-dd98510b4776}\
LogVolumeMountPoint                  : E:\
DatabasePathIsOnMountedFolder        : False
DatabaseVolumeName                   : \\?\Volume{b92c9520-905f-4ee4-902d-1e73c26b1717}\
DatabaseVolumeMountPoint             : F:\
ExchangeVolumeMountPoint             :
LastDatabaseVolumeNameTransitionTime : 01.01.1601 00:00:00
LastDatabaseVolumeName               :
DiskFreeSpacePercent                 : 90
DiskTotalSpaceBytes                  : 107237863424
DiskFreeSpaceBytes                   : 97164902400
SeedingSource                        : False
ActivationPreference                 : 2
LogsCopiedSinceInstanceStart         : 45
LogsReplayedSinceInstanceStart       : 86
ExtendedErrorInfo                    :
ErrorEventId                         : 0
ErrorMessage                         :
ReplayQueueNotKeepingUp              : False
CopyQueueNotKeepingUp                : False
SnapshotLatestCopyBackup             : False
SnapshotLatestDifferentialBackup     : False
SnapshotLatestIncrementalBackup      : False
SnapshotLatestFullBackup             : True
LatestCopyBackupTime                 : 01.01.1601 00:00:00
LatestDifferentialBackupTime         : 01.01.1601 00:00:00
LatestIncrementalBackupTime          : 01.01.1601 00:00:00
LatestFullBackupTime                 : 04.07.2013 19:31:34
LastLogCopyNotified                  : 4100
CurrentReplayLogTime                 : 05.07.2013 05:24:26
LastReplayedLogTime                  : 05.07.2013 05:39:26
LastInspectedLogTime                 : 05.07.2013 05:39:26
LastCopiedLogTime                    : 05.07.2013 05:39:26
LastLogInfoFromClusterGen            : 4100
LastLogInfoFromClusterTime           : 05.07.2013 05:44:01
LastLogInfoFromCopierTime            : 05.07.2013 05:44:00
LastLogInfoIsStale                   : False
LastCopyNotifiedLogTime              : 05.07.2013 05:39:26
LatestAvailableLogTime               : 05.07.2013 05:39:26
DumpsterEndTime                      : 01.01.0001 00:00:00
DumpsterStartTime                    : 01.01.0001 00:00:00
DumpsterRequired                     : False
DumpsterServers                      :
ActionInitiator                      : Service
SuspendComment                       :
SinglePageRestoreNumber              : 0
SinglePageRestore                    : False
ReplayLagPercentage                  : 0
ReplayLagPlayDownReason              : None
ReplayLagEnabled                     : Disabled
ReplayLagDisabledReason              :
ActualReplayLagTime                  : 00:04:40.1554322
ConfiguredReplayLagTime              : 00:00:00
NodeStatus                           : Up
WorkerProcessId                      : 8740
ReseedBlocked                        : False
ResumeBlocked                        : False
ReplaySuspended                      : False
LostWrite                            : False
Viable                               : True
ActivationSuspended                  : False
DbSeedingKBytesWrittenPerSec         : 0
DbSeedingKBytesReadPerSec            : 0
DbSeedingKBytesWritten               : 0
DbSeedingKBytesRead                  : 0
DbSeedingPercent                     : 0
ContentIndexSeedingSource            :
ContentIndexSeedingPercent           :
ContentIndexMailboxesToCrawl         :
ContentIndexBacklog                  : 0
ContentIndexRetryQueueSize           : 0
ContentIndexErrorMessage             :
ContentIndexStatus                   : Healthy
LastStatusTransitionTime             : 04.07.2013 17:46:02
InstanceStartTime                    : 04.07.2013 17:45:59
CICurrentness                        : Current
CopyStatus                           : Healthy
ServerVersion                        : 1941996140
LastLogReplayed                      : 4100
LastLogInspected                     : 4100
LastLogCopied                        : 4100
LastLogGenerated                     : 4100
DataAvailabilityTime                 : 05.07.2013 05:39:26
DataProtectionTime                   : 05.07.2013 05:39:26
LastLogGeneratedTime                 : 05.07.2013 05:44:06
StatusRetrievedTime                  : 05.07.2013 05:44:06
ActiveDatabaseCopy                   : CASMBX01
MailboxServer                        : CASMBX02
DBName                               : Users05
DBGuid                               : 57da90db-bc6d-4bf3-b508-64d3bff41377
Database Copy : Users05\casmbx01
VolumeInfoLastError                  :
LogPathIsOnMountedFolder             : False
LogVolumeName                        : \\?\Volume{94937623-3da4-49ab-825e-49c982ec79f1}\
LogVolumeMountPoint                  : E:\
DatabasePathIsOnMountedFolder        : False
DatabaseVolumeName                   : \\?\Volume{73a9913d-1660-487b-8a8b-b53cb017728e}\
DatabaseVolumeMountPoint             : F:\
ExchangeVolumeMountPoint             :
LastDatabaseVolumeNameTransitionTime : 01.01.1601 00:00:00
LastDatabaseVolumeName               :
DiskFreeSpacePercent                 : 90
DiskTotalSpaceBytes                  : 107237863424
DiskFreeSpaceBytes                   : 96646443008
SeedingSource                        : False
ActivationPreference                 : 1
LogsCopiedSinceInstanceStart         : 0
LogsReplayedSinceInstanceStart       : 0
ExtendedErrorInfo                    :
ErrorEventId                         : 0
ErrorMessage                         :
ReplayQueueNotKeepingUp              : False
CopyQueueNotKeepingUp                : False
SnapshotLatestCopyBackup             : False
SnapshotLatestDifferentialBackup     : False
SnapshotLatestIncrementalBackup      : False
SnapshotLatestFullBackup             : True
LatestCopyBackupTime                 : 01.01.1601 00:00:00
LatestDifferentialBackupTime         : 01.01.1601 00:00:00
LatestIncrementalBackupTime          : 01.01.1601 00:00:00
LatestFullBackupTime                 : 03.07.2013 19:30:53
LastLogCopyNotified                  : 4100
CurrentReplayLogTime                 : 01.01.0001 00:00:00
LastReplayedLogTime                  : 01.01.0001 00:00:00
LastInspectedLogTime                 : 01.01.0001 00:00:00
LastCopiedLogTime                    : 01.01.0001 00:00:00
LastLogInfoFromClusterGen            : 4100
LastLogInfoFromClusterTime           : 05.07.2013 05:44:01
LastLogInfoFromCopierTime            : 05.07.2013 05:44:06
LastLogInfoIsStale                   : False
LastCopyNotifiedLogTime              : 05.07.2013 05:39:26
LatestAvailableLogTime               : 01.01.0001 00:00:00
DumpsterEndTime                      : 01.01.0001 00:00:00
DumpsterStartTime                    : 01.01.0001 00:00:00
DumpsterRequired                     : False
DumpsterServers                      :
ActionInitiator                      : Unknown
SuspendComment                       :
SinglePageRestoreNumber              : 0
SinglePageRestore                    : False
ReplayLagPercentage                  : 0
ReplayLagPlayDownReason              : None
ReplayLagEnabled                     : Disabled
ReplayLagDisabledReason              :
ActualReplayLagTime                  : 00:00:00
ConfiguredReplayLagTime              : 00:00:00
NodeStatus                           : Up
WorkerProcessId                      : 7624
ReseedBlocked                        : False
ResumeBlocked                        : False
ReplaySuspended                      : False
LostWrite                            : False
Viable                               : False
ActivationSuspended                  : False
DbSeedingKBytesWrittenPerSec         : 0
DbSeedingKBytesReadPerSec            : 0
DbSeedingKBytesWritten               : 0
DbSeedingKBytesRead                  : 0
DbSeedingPercent                     : 0
ContentIndexSeedingSource            :
ContentIndexSeedingPercent           :
ContentIndexMailboxesToCrawl         :
ContentIndexBacklog                  : 0
ContentIndexRetryQueueSize           : 0
ContentIndexErrorMessage             :
ContentIndexStatus                   : Healthy
LastStatusTransitionTime             : 01.01.0001 00:00:00
InstanceStartTime                    : 04.07.2013 17:45:58
CICurrentness                        : Current
CopyStatus                           : Mounted
ServerVersion                        : 1941996140
LastLogReplayed                      : 0
LastLogInspected                     : 0
LastLogCopied                        : 0
LastLogGenerated                     : 4100
DataAvailabilityTime                 : 01.01.0001 00:00:00
DataProtectionTime                   : 01.01.0001 00:00:00
LastLogGeneratedTime                 : 01.01.0001 00:00:00
StatusRetrievedTime                  : 05.07.2013 05:44:06
ActiveDatabaseCopy                   : CASMBX01
MailboxServer                        : CASMBX01
DBName                               : Users05
DBGuid                               : 57da90db-bc6d-4bf3-b508-64d3bff41377
Rinken

Hi.
I also ran the CheckDatabaseRedundancy.ps1 script. the output was:
DatabaseName                        : Users05
LastRedundancyCount                 : 0
CurrentRedundancyCount              : 2
LastState                           : Unknown
CurrentState                        : Green
LastStateTransitionUtc              : 11.07.2013 07:34:16
LastGreenTransitionUtc              : 11.07.2013 07:34:16
LastRedTransitionUtc                :
LastGreenReportedUtc                : 11.07.2013 07:34:16
HasReportedGreenEvent               : True
LastRedReportedUtc                  :
PreviousTotalRedDuration            : 00:00:00
TotalRedDuration                    : 00:00:00
IsTransitioningState                : True
HasErrorsInHistory                  : False
CurrentErrorMessages                :
ErrorHistory                        :
IsOneDatacenter                     : False
CurrentRedundancyCountPerSite       : {[Default-First-Site-Name, 2]}
CurrentSearchRedundancyCountPerSite : {[Default-First-Site-Name, 2]}
DatabaseName                        : Users04
LastRedundancyCount                 : 0
CurrentRedundancyCount              : 2
LastState                           : Unknown
CurrentState                        : Green
LastStateTransitionUtc              : 11.07.2013 07:34:16
LastGreenTransitionUtc              : 11.07.2013 07:34:16
LastRedTransitionUtc                :
LastGreenReportedUtc                : 11.07.2013 07:34:16
HasReportedGreenEvent               : True
LastRedReportedUtc                  :
PreviousTotalRedDuration            : 00:00:00
TotalRedDuration                    : 00:00:00
IsTransitioningState                : True
HasErrorsInHistory                  : False
CurrentErrorMessages                :
ErrorHistory                        :
IsOneDatacenter                     : False
CurrentRedundancyCountPerSite       : {[Default-First-Site-Name, 2]}
CurrentSearchRedundancyCountPerSite : {[Default-First-Site-Name, 2]}
DatabaseName                        : Users02
LastRedundancyCount                 : 0
CurrentRedundancyCount              : 2
LastState                           : Unknown
CurrentState                        : Green
LastStateTransitionUtc              : 11.07.2013 07:34:17
LastGreenTransitionUtc              : 11.07.2013 07:34:17
LastRedTransitionUtc                :
LastGreenReportedUtc                : 11.07.2013 07:34:17
HasReportedGreenEvent               : True
LastRedReportedUtc                  :
PreviousTotalRedDuration            : 00:00:00
TotalRedDuration                    : 00:00:00
IsTransitioningState                : True
HasErrorsInHistory                  : False
CurrentErrorMessages                :
ErrorHistory                        :
IsOneDatacenter                     : False
CurrentRedundancyCountPerSite       : {[Default-First-Site-Name, 2]}
CurrentSearchRedundancyCountPerSite : {[Default-First-Site-Name, 2]}
DatabaseName                        : Users03
LastRedundancyCount                 : 0
CurrentRedundancyCount              : 2
LastState                           : Unknown
CurrentState                        : Green
LastStateTransitionUtc              : 11.07.2013 07:34:17
LastGreenTransitionUtc              : 11.07.2013 07:34:17
LastRedTransitionUtc                :
LastGreenReportedUtc                : 11.07.2013 07:34:17
HasReportedGreenEvent               : True
LastRedReportedUtc                  :
PreviousTotalRedDuration            : 00:00:00
TotalRedDuration                    : 00:00:00
IsTransitioningState                : True
HasErrorsInHistory                  : False
CurrentErrorMessages                :
ErrorHistory                        :
IsOneDatacenter                     : False
CurrentRedundancyCountPerSite       : {[Default-First-Site-Name, 2]}
CurrentSearchRedundancyCountPerSite : {[Default-First-Site-Name, 2]}
DatabaseName                        : Users01
LastRedundancyCount                 : 0
CurrentRedundancyCount              : 2
LastState                           : Unknown
CurrentState                        : Green
LastStateTransitionUtc              : 11.07.2013 07:34:17
LastGreenTransitionUtc              : 11.07.2013 07:34:17
LastRedTransitionUtc                :
LastGreenReportedUtc                : 11.07.2013 07:34:17
HasReportedGreenEvent               : True
LastRedReportedUtc                  :
PreviousTotalRedDuration            : 00:00:00
TotalRedDuration                    : 00:00:00
IsTransitioningState                : True
HasErrorsInHistory                  : False
CurrentErrorMessages                :
ErrorHistory                        :
IsOneDatacenter                     : False
CurrentRedundancyCountPerSite       : {[Default-First-Site-Name, 2]}
CurrentSearchRedundancyCountPerSite : {[Default-First-Site-Name, 2]}
Rinken

SAP BW on HANA Migration for Process , Bex Queries and system Copy

Hi All ,
Can you please let me know the steps for migrating Process chains , BW queries and System copy for BW on HANA .
If you have examples from real time scenarios it would be good .
Thanks in advance

Hi,
for Systemcopies see also - SAP First Guidance - BW Housekeeping and BW-PCA
for the overall process - SAP First Guidance - Migration BW on HANA using the DMO option in SUM
Best Regards Roland

CHARM and System Copy (Database Copy)

Similar Messages

Maybe you are looking for