ChaRM config  - system check error

Hi All ,
  I am working with the basis team to move forward with ChaRM - Solution Manager. We have a two system landscape with Development (DSM)  and Production (PSM) (domain is set up as DOMAIN_DSM - exists in STMS).
We have most of the configuration  / system landscapes done . When we do the ChaRM check ( solar_project_admin--> select project --> system lanscape --> Change request --> check)   for a project that involves system (DBW - BW  Development and a different transport domain DOMAIN_DBW , does not exist in STMS for DSM)  it comes up with a system error saying - No domain for system DBW.
It seems to be checking the tabel TMSCSYS for systems DBW and when it does not find it there it complains. The question is do we have to set up these system in STMS in solution manager ?
any help would be appreciated . if you want to send me a doc please do it at amohamm at yahoo
thanks.
ali.

The problem was solved by activating the domain links for the multiple domain scenario . Please make sure that you carry out this activity - " You must perform all TMS activities in your satellite systems and not in your SAP Solution Manager system " .
Ali.

Similar Messages

  • CS4 System Check Error

    I recently tried to isnstall CS4 on my Macbook and when I inserted the 2nd cd, it quit.  I then tried to uninstall and install again, but I get a System Check alert saying
    "Critical errors were found in setup for Adobe CS4 Design Premium: 
         undefined
         The installer database is invalid: please re-install the product from the original media.
    Please see the Setup log file for details. Click Quit to exit Setup."
    I am frustrated and have tried everything I know.  I'm new to Mac and would appreciate any help!!  Thanks in advance.
    Carrie

    Call tech support. Installation issues for current versions are handled for free.

  • System Check error : Actual open files limit:7000, needed 8000 nodes:

    Hi,
    System check showing up error 'Actual open files limit:7000, needed 8000 nodes:' in our BIA system.
    SAP BIA Admin guide suggested open files limit should not be less than 8000. I verified at OS level  
    ulimit for open files (-n) is displayed as '8000' which is good.
    Please suggest me how to fix this error. What if we increase ulimit value for open files at OS level?
    Thanks in advance
    Regards,
    Srinivas.

    Hello Srinivas,
    please see SAP Note <a href="http://service.sap.com/sap/support/notes/1273695">1273695</a>.
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • The operating system returned error 23(Data error (cyclic redundancy check).)

    My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
    Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
    system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
    for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823).  The step failed.
    Thanks 
    RehaanKhan. M

    DBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
    For crying out loud! Don't you have any shame!
    There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
    files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
    Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
    be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
    But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
    Erland Sommarskog, SQL Server MVP, [email protected]
    Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
    front end application happening as usual.  Please help on this.
    RehaanKhan. M

  • Foxfire downloaded an up-date last night (10 20/2010) at 5:30 PM EDST and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM

    Foxfire downloaded an up-date last night (10/20/2010) at 5:30 PM EDST when I started Firefox, and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM. This machine is Windows 2000 Professional on Dell computer and Foxfire 3.6 or 4 not sure computer is stuck at the error message.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • Configuration Check Error in Managed System Configuration

    Hi dear experts,
    I come across a problem as the screenshot shows blew:
    I check some relevant information, but no issues found:
    1.
    DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
    saphostexec running (pid = 7094)
    sapstartsrv running (pid = 7097)
    10:46:34 24.06.2014     LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
    saposcol running (pid = 7130)
    DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
    SAPSYSTEMNAME = SAP
    SAPSYSTEM = 99
    service/porttypes = SAPHostControl SAPOscol SAPCCMS
    DIR_LIBRARY = /usr/sap/hostctrl/exe
    DIR_EXECUTABLE = /usr/sap/hostctrl/exe
    DIR_PROFILE = /usr/sap/hostctrl/exe
    DIR_GLOBAL = /usr/sap/hostctrl/exe
    DIR_INSTANCE = /usr/sap/hostctrl/exe
    DIR_HOME = /usr/sap/hostctrl/work
    service/admin_users = daaadm
    service/logfile_000 = /tmp/s
    service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
    service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
    service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
    And the version of hostagent is up-to-date.
    2.The URL
    - http://<SMDhost>:1128/SAPOscol/?wsdl
    - http://<SMDhost>:1128/SAPHostControl/?wsdl
    can be accessed.
    3.The step 3 in managed systems configuration is executed successfully.
    4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
    5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
    Now I have no idea how to proceed, please give me some advice, thank you in advance.
    Best Regards,
    Pany Pan

    Hi Pany
    Kindly check the below two sapnote
    1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
    1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
    Moreover , you need to check/verify/maintain the parameter in configtool
    ThreadManager -> MaxThreadCount
    Total number of Diagnostics Agents * 2 + 50
    1250
    ThreadManager -> InitialThreadCount
    Total number of Diagnostics Agents * 1.5
    900
    ThreadManager -> MinThreadCount
    Total number of Diagnostics Agents
    600
    ConnectionManipulator -> maxSoTimeOutConnections
    Total number of Diagnostics Agents * 1.35
    810
    ConnectionManipulator -> MaxParallelUsers
    Total number of Diagnostics Agents + 50
    650
    In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki 
    guide check the section Required Solution Manager Java Stack Settings (Scalability)
    I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
    minthreadcount , maxSoTimeOutConnections.
    With Regards
    Ashutosh Chaturvedi

  • Error message windows\system32\config\system does anyone know what to do to get it working again

    Hi
    This above errot message comes up when i try to booth up the computer, when bought the compyer did not come with disk butwas pre installed, its rather urgent as my dad's medical files are on there, any help will be appreciated

    Hi silvanavandijk,
    It would be very helpful if you post the whole error and not just the filename. Also it would be very useful to know what OS version/edition (for example: Windows Vista Prof x64) and thinkpad model you got.
    I have seen errors that appear right when Windows start to load with a black screen that says windows\system32\config\system is missing or corrupt or something like that. Is that what you experience? I have also only seen this problem with computers running Windows Vista, are you using Vista?
    If this is the problem you see the solution is to boot from a Windows DVD and choose the repair option instead of starting the windows installation. That should fix the problem. Another option would be if you got a image backup of the computer. Without the DVD i don't know how to fix this problem or if it's even possible.
    -gan

  • While doing MIGO transaction system showing error: Check table169P the entr

    Hi experts,
    while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
    pls do needful.
    Thanks&Regards
    sreenivas.p

    Hi,
    Please specify Whether you are doing Blocking of Invoices or what?
    As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding  company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
    Please check....
    For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
    Regards,
    Ninad Kshirsagar

  • Potal Authorisation Error:"Failed to connect backend system.Check your syst

    Hi Experts,
    Please advise me on how to proceed....
    I created a dashboard reports (5) based on 5 different reports in BI Queries using Visual Composer...I deployed them to portal and in portal i assigned those iviews to a role and assigned that role to a end user.
    In BW end user is autorized to execute those 5 queries and in portal user is able to access those queries as well
    But when he tried to execute Dashboard reports..it is displaying error
    "Failed to connect backend system.Check your system definition and user priviliges"
    Then i modified his authorisations in BW assigned SAP_J2EE_ADMIN role in BW and then in portal he is able to execute the Dashboard reports...by assigning the SAP_J2EE_ADMIN role he is able to execute dashboards in portal and he got more authorisation in portal than he required like 'Content Admin','User Admin' and 'System Admin'
    I tried by using SAP_J2EE_GUEST role but he is getting error
    "Failed to connect backend system.Check your system definition and user priviliges"
    Please advise on how to proceed
    Thanks

    Hi,
    Refer,
    Visual composer
    Failed to connect to backend system. Check your system definition and user
    Regards,
    P.Manivannan.

  • System-wide Spell Checker Error

    I newly installed Leopard on a MacBook Pro, and now in Mail, Safari and iTunes, I get a "Couldn't contact Spell Checker" error message when I try to type in these programs. The problem disappears in Mail if I set Spell Check to never in the preferences. Safari & iTunes don't have that option, that I could see.
    But that's besides the point. Spell check should be seamless and automatic. The error doesn't just occur once. It basically hangs the program because the error cycles continuously and I have to force-quit to get out of the application.
    So now I am using Firefox to type this because Safari wouldn't let me type without letting me know it can't contact spell checker.
    To remedy the situation, I've verified and repaired permissions, although I did not see any permissions that related to this issue. I downloaded and re-installed the 10.5.1 update. No effect. I've spotlighted 'spell checker' and only gotten the .dll file from Windows as a return.
    Guesses, anyone?

    etresoft, thanks for the hint. I looked and found tons of stuff, but not a thing to do with the spell checker error. I did log into another profile on the affected machine and had no trouble whatsoever. Does that mean the problem is in my home/library? I think, hopefully logically, that there's another program causing this issue. What would be the logical way to approach this?

  • MBP "System Profile" error when try read "Logs" and long time blue screen

    MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
    This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
    Here is the error:
    Sun Jun 22 20:13:47 2008
    panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
    CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
    CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
    EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
    0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
    0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
    0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
    0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
    0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
    0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
    0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
    0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
    0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
    0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
    0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
    0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffff1c8
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
    dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
    BSD process name corresponding to current thread: ioreg
    Mac OS version:
    9D34
    Kernel version:
    Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    This is the System Config:
    Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
    Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
    Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
    Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
    USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

    Hello @larrycarol99,
    I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • Update kernel and recieved a "Machine check error"

    I was on Vacation this last weekend but was finally able to update today. Upgrade seemd fine, issued reboot command and instead of my normal reboot I was greeted with "machine check error" flashing in my upper left hand corner. Syslinux never came up. I powered off manually and pulled the battery, subsequent reboot went off without a hitch.
    pacman log
    [2013-09-09 18:12] [PACMAN] Running 'pacman -Syyu'
    [2013-09-09 18:12] [PACMAN] synchronizing package lists
    [2013-09-09 18:12] [PACMAN] starting full system upgrade
    [2013-09-09 18:13] [PACMAN] upgraded curl (7.32.0-1 -> 7.32.0-2)
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'default'
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck.img
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck.img
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'fallback'
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck-fallback.img -S autodetect
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck-fallback.img
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-09 18:13] [ALPM-SCRIPTLET]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Thank you for using http://repo-ck.com/ for your linux-ck package needs.
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Note that the following CPU optimized packages are or could be available to you:
    [2013-09-09 18:13] [ALPM-SCRIPTLET] AMD : barcelona, bulldozer, kx, k10, piledriver
    [2013-09-09 18:13] [ALPM-SCRIPTLET] Intel : atom, core2, haswell, ivybridge, nehalem, p4, pentm, sandybridge, haswell
    [2013-09-09 18:13] [ALPM-SCRIPTLET]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Search via group name: pacman -Sg ck-ivybridge
    [2013-09-09 18:13] [ALPM-SCRIPTLET]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Post in the repo support thread if package group is unavailable for your architecture:
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> https://bbs.archlinux.org/viewtopic.php?id=111715
    [2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge (3.10.10-1 -> 3.11-1)
    [2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge-headers (3.10.10-1 -> 3.11-1)
    [2013-09-09 18:13] [ALPM-SCRIPTLET] rmmod: ERROR: Module nvidia is not currently loaded
    [2013-09-09 18:13] [ALPM-SCRIPTLET] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2013-09-09 18:13] [PACMAN] upgraded nvidia-ck (325.15-5 -> 325.15-6)
    [2013-09-09 18:13] [PACMAN] upgraded parallel (20130722-1 -> 20130822-1)
    [2013-09-09 18:13] [PACMAN] upgraded portaudio (19_20111121-1 -> 19_20111121-2)
    [2013-09-09 18:13] [PACMAN] upgraded weechat (0.4.1-2 -> 0.4.1-4)
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Linux version 3.11.0-1-ck (squishy@ease) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Sep 9 08:00:27 EDT 2013
    [ 0.000000] Command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bac11fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bac12000-0x00000000bad8dfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bad8e000-0x00000000bad9bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bad9c000-0x00000000bad9dfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bad9e000-0x00000000bad9ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bada0000-0x00000000bade7fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bade8000-0x00000000baf2bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baf2c000-0x00000000baf91fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000baf92000-0x00000000baf97fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baf98000-0x00000000bafe7fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bafe8000-0x00000000baffcfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baffd000-0x00000000baffffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. RC512/RC512, BIOS 06VQ.M024.20110212.SSH 02/12/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 3 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask FC0000000 write-back
    [ 0.000000] 6 base 23FE00000 mask FFFE00000 uncachable
    [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbaffd max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b0d000, 0x01b0dfff] PGTABLE
    [ 0.000000] BRK [0x01b0e000, 0x01b0efff] PGTABLE
    [ 0.000000] BRK [0x01b0f000, 0x01b0ffff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23fc00000-0x23fdfffff]
    [ 0.000000] [mem 0x23fc00000-0x23fdfffff] page 2M
    [ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fbfffff]
    [ 0.000000] [mem 0x23c000000-0x23fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
    [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x40200000-0xbac11fff]
    [ 0.000000] [mem 0x40200000-0xbabfffff] page 2M
    [ 0.000000] [mem 0xbac00000-0xbac11fff] page 4k
    [ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
    [ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbad8e000-0xbad9bfff]
    [ 0.000000] [mem 0xbad8e000-0xbad9bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbad9e000-0xbad9ffff]
    [ 0.000000] [mem 0xbad9e000-0xbad9ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbade8000-0xbaf2bfff]
    [ 0.000000] [mem 0xbade8000-0xbaf2bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbaf92000-0xbaf97fff]
    [ 0.000000] [mem 0xbaf92000-0xbaf97fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbafe8000-0xbaffcfff]
    [ 0.000000] [mem 0xbafe8000-0xbaffcfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x1fd18000-0x1fffefff]
    [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 SECCSD)
    [ 0.000000] ACPI: XSDT 00000000baffee18 0006C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000baf9bd98 000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBAFE5E40/0x00000000BAFE5D40, using 32 (20130517/tbfadt-522)
    [ 0.000000] ACPI: DSDT 00000000baf84018 0866F (v01 SECCSD LH43STAR 00000000 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000bafe5e40 00040
    [ 0.000000] ACPI: APIC 00000000baffdf18 000CC (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
    [ 0.000000] ACPI: HPET 00000000bafe6d18 00038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
    [ 0.000000] ACPI: SLIC 00000000baf9cc18 00176 (v01 SECCSD LH43STAR 06222004 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000bafe6c98 0003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000baf91018 00A1D (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000baf90018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000baf9a018 00D80 (v01 SgRef SgTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000baf98018 011E8 (v01 OptRef OptTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xbac11fff]
    [ 0.000000] node 0: [mem 0xbad8e000-0xbad9bfff]
    [ 0.000000] node 0: [mem 0xbad9e000-0xbad9ffff]
    [ 0.000000] node 0: [mem 0xbade8000-0xbaf2bfff]
    [ 0.000000] node 0: [mem 0xbaf92000-0xbaf97fff]
    [ 0.000000] node 0: [mem 0xbafe8000-0xbaffcfff]
    [ 0.000000] node 0: [mem 0x100000000-0x23fdfffff]
    [ 0.000000] On node 0 totalpages: 2074398
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 157 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11879 pages used for memmap
    [ 0.000000] DMA32 zone: 760193 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20472 pages used for memmap
    [ 0.000000] Normal zone: 1310208 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbac12000-0xbad8dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbad9c000-0xbad9dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbada0000-0xbade7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaf2c000-0xbaf91fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaf98000-0xbafe7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaffd000-0xbaffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
    [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s84096 r8192 d22400 u131072
    [ 0.000000] pcpu-alloc: s84096 r8192 d22400 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041826
    [ 0.000000] Kernel command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8071168K/8297592K available (4912K kernel code, 725K rwdata, 1676K rodata, 1104K init, 1260K bss, 226424K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:1192 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1995.468 MHz processor
    [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.22 BogoMIPS (lpj=6651560)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000051] Security Framework initialized
    [ 0.000058] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000069] Mount-cache hash table entries: 256
    [ 0.000253] Initializing cgroup subsys memory
    [ 0.000263] Initializing cgroup subsys devices
    [ 0.000265] Initializing cgroup subsys freezer
    [ 0.000267] Initializing cgroup subsys net_cls
    [ 0.000268] Initializing cgroup subsys blkio
    [ 0.000270] Initializing cgroup subsys bfqio
    [ 0.000294] CPU: Physical Processor ID: 0
    [ 0.000295] CPU: Processor Core ID: 0
    [ 0.000300] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.000303] mce: CPU supports 9 MCE banks
    [ 0.000318] CPU0: Thermal monitoring enabled (TM1)
    [ 0.000330] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 5
    [ 0.000467] Freeing SMP alternatives memory: 20K (ffffffff819cb000 - ffffffff819d0000)
    [ 0.001938] ACPI: Core revision 20130517
    [ 0.008675] ACPI: All ACPI Tables successfully acquired
    [ 0.016462] ftrace: allocating 19779 entries in 78 pages
    [ 0.027603] Switched APIC routing to physical flat.
    [ 0.028009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061003] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.061011] TSC deadline timer enabled
    [ 0.061026] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.061034] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.061036] ... version: 3
    [ 0.061037] ... bit width: 48
    [ 0.061038] ... generic registers: 4
    [ 0.061040] ... value mask: 0000ffffffffffff
    [ 0.061041] ... max period: 0000ffffffffffff
    [ 0.061042] ... fixed-purpose events: 3
    [ 0.061043] ... event mask: 000000070000000f
    [ 0.084503] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.071127] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
    [ 0.164288] Brought up 8 CPUs
    [ 0.164293] smpboot: Total of 8 processors activated (31940.80 BogoMIPS)
    [ 0.172724] devtmpfs: initialized
    [ 0.174171] PM: Registering ACPI NVS region [mem 0xbaf2c000-0xbaf91fff] (417792 bytes)
    [ 0.174179] PM: Registering ACPI NVS region [mem 0xbaf98000-0xbafe7fff] (327680 bytes)
    [ 0.175128] RTC time: 1:14:39, date: 09/10/13
    [ 0.175188] NET: Registered protocol family 16
    [ 0.175350] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.175353] ACPI: bus type PCI registered
    [ 0.175355] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.175429] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.175432] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.185354] PCI: Using configuration type 1 for base access
    [ 0.186084] bio: create slab <bio-0> at 0
    [ 0.186285] ACPI: Added _OSI(Module Device)
    [ 0.186287] ACPI: Added _OSI(Processor Device)
    [ 0.186289] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.186291] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.187915] ACPI: EC: Look up EC in DSDT
    [ 0.189513] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.239236] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.241431] ACPI: SSDT 00000000badba718 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.241847] ACPI: Dynamic OEM Table Load:
    [ 0.241850] ACPI: SSDT (null) 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.252823] ACPI: SSDT 00000000badbba98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.253271] ACPI: Dynamic OEM Table Load:
    [ 0.253273] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.266019] ACPI: SSDT 00000000badb9d98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.266428] ACPI: Dynamic OEM Table Load:
    [ 0.266430] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 1.207371] ACPI: Interpreter enabled
    [ 1.207386] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 1.207404] ACPI: (supports S0 S1 S3 S4 S5)
    [ 1.207406] ACPI: Using IOAPIC for interrupt routing
    [ 1.207438] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.207580] ACPI: No dock devices found.
    [ 1.221274] ACPI: Power Resource [FN00] (off)
    [ 1.221369] ACPI: Power Resource [FN01] (off)
    [ 1.222064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.222103] \_SB_.PCI0:_OSC invalid UUID
    [ 1.222105] _OSC request data:1 8 0
    [ 1.222659] PCI host bridge to bus 0000:00
    [ 1.222663] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 1.222665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.222668] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.222670] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.222672] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 1.222674] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 1.222676] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 1.222678] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 1.222680] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 1.222682] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 1.222684] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 1.222686] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 1.222695] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 1.222797] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 1.222833] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.222921] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 1.222933] pci 0000:00:02.0: reg 0x10: [mem 0xf5400000-0xf57fffff 64bit]
    [ 1.222941] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.222951] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
    [ 1.223070] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 1.223097] pci 0000:00:16.0: reg 0x10: [mem 0xf760a000-0xf760a00f 64bit]
    [ 1.223179] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.223280] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 1.223304] pci 0000:00:1a.0: reg 0x10: [mem 0xf7608000-0xf76083ff]
    [ 1.223402] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.223495] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 1.223514] pci 0000:00:1b.0: reg 0x10: [mem 0xf7600000-0xf7603fff 64bit]
    [ 1.223588] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.223678] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 1.223764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.223823] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.223866] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 1.223952] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.224010] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.224050] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
    [ 1.224135] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 1.224238] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 1.224262] pci 0000:00:1d.0: reg 0x10: [mem 0xf7607000-0xf76073ff]
    [ 1.224360] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.224451] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 1.224646] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 1.224668] pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
    [ 1.224677] pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
    [ 1.224686] pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
    [ 1.224695] pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
    [ 1.224704] pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
    [ 1.224714] pci 0000:00:1f.2: reg 0x24: [mem 0xf7606000-0xf76067ff]
    [ 1.224763] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.224847] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 1.224866] pci 0000:00:1f.3: reg 0x10: [mem 0xf7605000-0xf76050ff 64bit]
    [ 1.224889] pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
    [ 1.225036] pci 0000:01:00.0: [10de:0dec] type 00 class 0x030200
    [ 1.225046] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
    [ 1.225055] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 1.225065] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
    [ 1.225072] pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
    [ 1.225079] pci 0000:01:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
    [ 1.232978] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.232986] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.232994] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
    [ 1.233003] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 1.233136] pci 0000:02:00.0: [8086:0087] type 00 class 0x028000
    [ 1.233183] pci 0000:02:00.0: reg 0x10: [mem 0xf6c00000-0xf6c01fff 64bit]
    [ 1.233407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.243003] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.243013] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.243022] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
    [ 1.243037] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
    [ 1.243204] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.243274] pci 0000:03:00.0: reg 0x10: [io 0xb000-0xb0ff]
    [ 1.243396] pci 0000:03:00.0: reg 0x18: [mem 0xe2c04000-0xe2c04fff 64bit pref]
    [ 1.243467] pci 0000:03:00.0: reg 0x20: [mem 0xe2c00000-0xe2c03fff 64bit pref]
    [ 1.243797] pci 0000:03:00.0: supports D1 D2
    [ 1.243799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.253026] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 1.253036] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
    [ 1.253045] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
    [ 1.253060] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
    [ 1.253163] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
    [ 1.253193] pci 0000:04:00.0: reg 0x10: [mem 0xf5800000-0xf5801fff 64bit]
    [ 1.253333] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    [ 1.263010] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 1.263020] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
    [ 1.263029] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
    [ 1.263043] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 1.263086] pci_bus 0000:00: on NUMA node 0
    [ 1.263130] \_SB_.PCI0:_OSC invalid UUID
    [ 1.263131] _OSC request data:1 1f 0
    [ 1.263135] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.263137] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.263659] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.263721] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.263779] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.263838] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 1.263896] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.263956] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.264015] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
    [ 1.264073] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
    [ 1.264724] ACPI: Enabled 6 GPEs in block 00 to 3F
    [ 1.264732] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.264797] Found 1 acpi root devices
    [ 1.264842] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.264936] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.264940] vgaarb: loaded
    [ 1.264941] vgaarb: bridge control possible 0000:00:02.0
    [ 1.264981] PCI: Using ACPI for IRQ routing
    [ 1.266623] PCI: pci_cache_line_size set to 64 bytes
    [ 1.266695] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
    [ 1.266697] e820: reserve RAM buffer [mem 0xbac12000-0xbbffffff]
    [ 1.266700] e820: reserve RAM buffer [mem 0xbad9c000-0xbbffffff]
    [ 1.266702] e820: reserve RAM buffer [mem 0xbada0000-0xbbffffff]
    [ 1.266705] e820: reserve RAM buffer [mem 0xbaf2c000-0xbbffffff]
    [ 1.266706] e820: reserve RAM buffer [mem 0xbaf98000-0xbbffffff]
    [ 1.266708] e820: reserve RAM buffer [mem 0xbaffd000-0xbbffffff]
    [ 1.266710] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
    [ 1.266803] NetLabel: Initializing
    [ 1.266805] NetLabel: domain hash size = 128
    [ 1.266806] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.266821] NetLabel: unlabeled traffic allowed by default
    [ 1.266851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.266857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.268893] Switched to clocksource hpet
    [ 1.273524] pnp: PnP ACPI init
    [ 1.273541] ACPI: bus type PNP registered
    [ 1.273643] system 00:00: [io 0x06a4] has been reserved
    [ 1.273646] system 00:00: [io 0x06a0] has been reserved
    [ 1.273650] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.273660] pnp 00:01: [dma 4]
    [ 1.273681] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.273705] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.273820] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.273850] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.273897] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.273900] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 1.273902] system 00:05: [io 0xffff] has been reserved
    [ 1.273904] system 00:05: [io 0xffff] has been reserved
    [ 1.273907] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 1.273909] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.273911] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.273913] system 00:05: [io 0x0a00-0x0a03] has been reserved
    [ 1.273915] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.273918] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.273966] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.274009] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.274013] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.274065] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.274118] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
    [ 1.274348] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.274351] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 1.274353] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.274355] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.274358] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.274360] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.274362] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.274364] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.274367] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.274369] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.274372] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
    [ 1.274375] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.274919] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.274921] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
    [ 1.274924] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.274936] pnp: PnP ACPI: found 12 devices
    [ 1.274937] ACPI: bus type PNP unregistered
    [ 1.281089] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.281093] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.281097] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
    [ 1.281100] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 1.281104] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.281108] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.281114] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
    [ 1.281118] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
    [ 1.281125] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 1.281129] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
    [ 1.281135] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
    [ 1.281140] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
    [ 1.281147] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 1.281150] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
    [ 1.281156] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
    [ 1.281161] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 1.281460] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.281462] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.281464] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.281466] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.281468] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.281470] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.281472] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.281474] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.281476] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.281478] pci_bus 0000:00: resource 13 [mem 0xbfa00000-0xfeafffff]
    [ 1.281480] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
    [ 1.281482] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.281484] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf50fffff]
    [ 1.281486] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 1.281488] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.281490] pci_bus 0000:02: resource 1 [mem 0xf6c00000-0xf75fffff]
    [ 1.281492] pci_bus 0000:02: resource 2 [mem 0xe3700000-0xe40fffff 64bit pref]
    [ 1.281494] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.281496] pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf6bfffff]
    [ 1.281498] pci_bus 0000:03: resource 2 [mem 0xe2c00000-0xe35fffff 64bit pref]
    [ 1.281500] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.281502] pci_bus 0000:04: resource 1 [mem 0xf5800000-0xf61fffff]
    [ 1.281504] pci_bus 0000:04: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 1.281541] NET: Registered protocol family 2
    [ 1.281696] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.281865] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.282015] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.282036] TCP: reno registered
    [ 1.282039] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.282068] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.282163] NET: Registered protocol family 1
    [ 1.282176] pci 0000:00:02.0: Boot video device
    [ 1.529060] PCI: CLS 64 bytes, default 64
    [ 1.529098] Unpacking initramfs...
    [ 1.590479] Freeing initrd memory: 2972K (ffff88001fd18000 - ffff88001ffff000)
    [ 1.591336] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.591340] software IO TLB [mem 0xb6c12000-0xbac12000] (64MB) mapped at [ffff8800b6c12000-ffff8800bac11fff]
    [ 1.591697] Scanning for low memory corruption every 60 seconds
    [ 1.592068] audit: initializing netlink socket (disabled)
    [ 1.592079] type=2000 audit(1378775680.569:1): initialized
    [ 1.605419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.606685] zbud: loaded
    [ 1.606816] VFS: Disk quotas dquot_6.5.2
    [ 1.606867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.607049] msgmni has been set to 15769
    [ 1.607262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.607320] io scheduler noop registered (default)
    [ 1.607324] io scheduler deadline registered
    [ 1.607360] io scheduler cfq registered
    [ 1.607365] io scheduler bfq registered
    [ 1.607452] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.607633] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.607648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.607731] intel_idle: MWAIT substates: 0x21120
    [ 1.607733] intel_idle: v0.4 model 0x2A
    [ 1.607734] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.607793] GHES: HEST is not enabled!
    [ 1.607848] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.608292] Linux agpgart interface v0.103
    [ 1.608376] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
    [ 1.611674] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.611689] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.611796] mousedev: PS/2 mouse device common for all mice
    [ 1.611968] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.611998] rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 1.612007] Intel P-state driver initializing.
    [ 1.612017] Intel pstate controlling: cpu 0
    [ 1.612032] Intel pstate controlling: cpu 1
    [ 1.612043] Intel pstate controlling: cpu 2
    [ 1.612054] Intel pstate controlling: cpu 3
    [ 1.612065] Intel pstate controlling: cpu 4
    [ 1.612076] Intel pstate controlling: cpu 5
    [ 1.612089] Intel pstate controlling: cpu 6
    [ 1.612100] Intel pstate controlling: cpu 7
    [ 1.612312] cpuidle: using governor ladder
    [ 1.612573] cpuidle: using governor menu
    [ 1.612636] drop_monitor: Initializing network drop monitor service
    [ 1.612712] TCP: cubic registered
    [ 1.612809] NET: Registered protocol family 10
    [ 1.612992] NET: Registered protocol family 17
    [ 1.613001] Key type dns_resolver registered
    [ 1.613275] PM: Hibernation image not present or could not be loaded.
    [ 1.613285] registered taskstats version 1
    [ 1.613900] Magic number: 13:40:205
    [ 1.613944] acpi device:2d: hash matches
    [ 1.613991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.614015] rtc_cmos 00:06: setting system clock to 2013-09-10 01:14:41 UTC (1378775681)
    [ 1.614893] Freeing unused kernel memory: 1104K (ffffffff818b7000 - ffffffff819cb000)
    [ 1.614895] Write protecting the kernel read-only data: 8192k
    [ 1.619318] Freeing unused kernel memory: 1220K (ffff8800014cf000 - ffff880001600000)
    [ 1.620313] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
    [ 1.620314] BFS CPU scheduler v0.441 by Con Kolivas.
    [ 1.627488] systemd-udevd[77]: starting version 204
    [ 1.629471] SCSI subsystem initialized
    [ 1.630602] ACPI: bus type ATA registered
    [ 1.630697] libata version 3.00 loaded.
    [ 1.631357] ahci 0000:00:1f.2: version 3.0
    [ 1.631500] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 1.642171] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0WARNINGx5 impl SATA mode
    [ 1.642175] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 1.642181] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.649744] scsi0 : ahciWARNING
    [ 1.650013] scsi1 : ahci
    [ 1.650141] scsi2 : ahci
    [ 1.650269] scsi3 : ahci
    [ 1.650401] scsi4 : ahci
    [ 1.650493] scsi5 : ahci
    [ 1.650686] ata1: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606100 irq 41
    [ 1.650690] ata2: DUMMY
    [ 1.650694] ata3: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606200 irq 41
    [ 1.650696] ata4: DUMMY
    [ 1.650698] ata5: DUMMY
    [ 1.650700] ata6: DUMMY
    [ 1.968795] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.968841] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.969674] ata1.00: ATA-9: M4-CT256M4SSD2, 010G, max UDMA/100
    [ 1.969683] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.970728] ata1.00: configured for UDMA/100
    [ 1.970980] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 010G PQ: 0 ANSI: 5
    [ 1.971592] ata3.00: ATAPI: TSSTcorp DVDWBD TS-LB23A, SC01, max UDMA/100
    [ 1.972317] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 1.972530] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.972535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.972581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.972980] ata3.00: configured for UDMA/100
    [ 1.974516] sda: sda1 sda2 sda3 sda4 sda5 sda6
    [ 1.975127] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.976456] scsi 2:0:0:0: CD-ROM TSSTcorp DVDWBD TS-LB23A SC01 PQ: 0 ANSI: 5
    [ 1.979211] ACPI: bus type USB registered
    [ 1.979276] usbcore: registered new interface driver usbfs
    [ 1.979339] usbcore: registered new interface driver hub
    [ 1.979451] usbcore: registered new device driver usb
    [ 1.980016] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 1.980024] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
    [ 1.980224] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
    [ 1.980231] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
    [ 1.980237] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
    [ 1.980244] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
    [ 1.980251] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
    [ 1.980257] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
    [ 1.980264] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
    [ 1.980271] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
    [ 1.980520] xHCI xhci_add_endpoint called for root hub
    [ 1.980523] xHCI xhci_check_bandwidth called for root hub
    [ 1.980554] hub 1-0:1.0: USB hub found
    [ 1.980561] hub 1-0:1.0: 2 ports detected
    [ 1.980645] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 1.980666] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
    [ 1.983135] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.983140] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.983305] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.983767] xHCI xhci_add_endpoint called for root hub
    [ 1.983769] xHCI xhci_check_bandwidth called for root hub
    [ 1.983799] hub 2-0:1.0: USB hub found
    [ 1.983808] hub 2-0:1.0: 2 ports detected
    [ 2.042830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.075045] ehci-pci: EHCI PCI platform driver
    [ 2.075169] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.075177] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.075185] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 2.075200] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.079109] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.079130] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7608000
    [ 2.088648] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.089496] hub 3-0:1.0: USB hub found
    [ 2.089505] hub 3-0:1.0: 2 ports detected
    [ 2.089935] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.089946] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.089954] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 2.089976] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.093871] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.093888] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7607000
    [ 2.101986] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.102116] hub 4-0:1.0: USB hub found
    [ 2.102121] hub 4-0:1.0: 2 ports detected
    [ 2.134853] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.199793] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.201658] systemd[1]: Set hostname to <watson>.
    [ 2.268492] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 2.268851] systemd[1]: Starting Collect Read-Ahead Data...
    [ 2.269341] systemd[1]: Starting Replay Read-Ahead Data...
    [ 2.269709] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.269820] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.269852] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    [ 2.269873] systemd[1]: Starting Syslog Socket.
    [ 2.269927] systemd[1]: Listening on Syslog Socket.
    [ 2.269946] systemd[1]: Starting Remote File Systems.
    [ 2.269961] systemd[1]: Reached target Remote File Systems.
    [ 2.269975] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.270017] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.270038] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.270074] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.270088] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.270126] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.270140] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.270168] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.270210] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 2.270352] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 2.270370] systemd[1]: Starting Encrypted Volumes.
    [ 2.270384] systemd[1]: Reached target Encrypted Volumes.
    [ 2.270402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.270449] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.270464] systemd[1]: Starting Paths.
    [ 2.270478] systemd[1]: Reached target Paths.
    [ 2.270494] systemd[1]: Starting Journal Socket.
    [ 2.270543] systemd[1]: Listening on Journal Socket.
    [ 2.270567] systemd[1]: Mounting POSIX Message Queue File System...
    [ 2.270849] systemd[1]: Mounting Debug File System...
    [ 2.271238] systemd[1]: Starting Create static device nodes in /dev...
    [ 2.271494] systemd-readahead[136]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
    [ 2.271888] systemd[1]: Starting Journal Service...
    [ 2.272443] systemd[1]: Started Journal Service.
    [ 2.272532] systemd[1]: Mounting Huge Pages File System...
    [ 2.273048] systemd[1]: Starting udev Kernel Socket.
    [ 2.273080] systemd[1]: Listening on udev Kernel Socket.
    [ 2.273155] systemd[1]: Starting udev Control Socket.
    [ 2.273189] systemd[1]: Listening on udev Control Socket.
    [ 2.273294] systemd[1]: Starting udev Coldplug all Devices...
    [ 2.273733] systemd[1]: Starting Swap.
    [ 2.273754] systemd[1]: Reached target Swap.
    [ 2.273772] systemd[1]: Expecting device dev-disk-by\x2duuid-06ee03bc\x2dca64\x2d406d\x2dbe45\x2db2b645137e08.device...
    [ 2.273786] systemd[1]: Expecting device dev-disk-by\x2duuid-5aedfe61\x2d50f2\x2d47c7\x2d82ac\x2d79930ee37462.device...
    [ 2.294504] systemd-sysctl[154]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 2.298123] EXT4-fs (sda5): re-mounted. Opts: discard
    [ 2.306988] systemd-udevd[161]: starting version 204
    [ 2.330645] FS-Cache: Loaded
    [ 2.344801] ACPI: Requesting acpi_cpufreq
    [ 2.345279] wmi: Mapper loaded
    [ 2.345847] RPC: Registered named UNIX socket transport module.
    [ 2.345849] RPC: Registered udp transport module.
    [ 2.345850] RPC: Registered tcp transport module.
    [ 2.345851] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.355607] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.358082] ACPI: Battery Slot [BAT1] (battery present)
    [ 2.358579] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.358604] ACPI: Lid Switch [LID0]
    [ 2.359113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.359119] ACPI: Power Button [PWRB]
    [ 2.359456] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.359461] ACPI: Sleep Button [SLPB]
    [ 2.359772] ACPI: AC Adapter [ADP1] (off-line)
    [ 2.360090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 2.360096] ACPI: Power Button [PWRF]
    [ 2.374300] ACPI: Fan [FAN0] (off)
    [ 2.374551] ACPI: Fan [FAN1] (off)
    [ 2.375124] ACPI: Invalid active2 threshold
    [ 2.377341] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
    [ 2.377349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377354] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
    [ 2.377358] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
    [ 2.377362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377364] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
    [ 2.377368] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
    [ 2.377372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377373] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
    [ 2.377377] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
    [ 2.377381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377383] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.378357] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.378361] ACPI: Thermal Zone [TZ00] (52 C)
    [ 2.383745] ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
    [ 2.383753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.383911] mei_me 0000:00:16.0: setting latency timer to 64
    [ 2.383955] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
    [ 2.386775] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 2.388164] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.388178] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.388494] r8169 0000:03:00.0: irq 51 for MSI/MSI-X
    [ 2.392549] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90004622000, e8:11:32:25:4e:78, XID 0c200000 IRQ 51
    [ 2.392554] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.394650] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.395234] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 2.396342] [drm] Initialized drm 1.1.0 20060810
    [ 2.397019] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.397023] ACPI: Thermal Zone [TZ01] (52 C)
    [ 2.403428] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.403432] Copyright(c) 2003-2013 Intel Corporation
    [ 2.403550] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.403625] iwlwifi 0000:02:00.0: irq 52 for MSI/MSI-X
    [ 2.413574] iwlwifi 0000:02:00.0: loaded firmware version 41.28.5.1 build 33926 op_mode iwldvm
    [ 2.414850] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
    [ 2.459516] samsung_laptop: detected SABI interface: SwSmi@
    [ 2.459520] samsung_laptop: Backlight controlled by ACPI video driver
    [ 2.475073] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.475258] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.475342] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.479302] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.479307] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.479310] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.479312] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
    [ 2.479315] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84
    [ 2.479382] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 2.486443] [drm] Memory usable by graphics device = 2048M
    [ 2.486454] i915 0000:00:02.0: setting latency timer to 64
    [ 2.510361] iTCO_vendor_support: vendor-support=0
    [ 2.510974] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.511063] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.511169] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.515715] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.522955] hub 3-1:1.0: USB hub found
    [ 2.523029] hub 3-1:1.0: 6 ports detected
    [ 2.552940] i915 0000:00:02.0: irq 54 for MSI/MSI-X
    [ 2.552952] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.552953] [drm] Driver supports precise vblank timestamp query.
    [ 2.552974] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 2.553071] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 2.554259] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.582133] [drm] Wrong MCH_SSKPD value: 0x17050407
    [ 2.582136] [drm] This can cause pipe underruns and display issues.
    [ 2.582137] [drm] Please upgrade your BIOS to fix this.
    [ 2.591839] tsc: Refined TSC clocksource calibration: 1995.467 MHz
    [ 2.597052] fbcon: inteldrmfb (fb0) is primary device
    [ 2.631810] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 2.691536] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
    [ 2.697765] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
    [ 2.708392] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard
    [ 2.726771] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 2.732165] systemd-logind[678]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 2.732251] systemd-logind[678]: Watching system buttons on /dev/input/event2 (Power Button)
    [ 2.732373] systemd-logind[678]: Watching system buttons on /dev/input/event1 (Lid Switch)
    [ 2.732460] systemd-logind[678]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 2.733090] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 2.755620] hub 4-1:1.0: USB hub found
    [ 2.755733] hub 4-1:1.0: 6 ports detected
    [ 2.821911] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
    [ 3.108586] usb 4-1.3: new high-speed USB device number 3 using ehci-pci
    [ 3.308514] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
    [ 3.322812] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
    [ 3.395720] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
    [ 3.568352] Console: switching to colour frame buffer device 170x48
    [ 3.574903] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 3.574905] i915 0000:00:02.0: registered panic notifier
    [ 3.575357] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 3.593033] Switched to clocksource tsc
    [ 3.594635] media: Linux media interface: v0.10
    [ 3.601441] Linux video capture interface: v2.00
    [ 3.607344] uvcvideo: Found UVC 1.00 device WebCam SCB-1110M (1210:0909)
    [ 3.612805] input: WebCam SCB-1110M as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input10
    [ 3.612886] usbcore: registered new interface driver uvcvideo
    [ 3.612889] USB Video Class driver (1.1.1)
    [ 3.624759] acpi device:47: registered as cooling_device10
    [ 3.628631] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 3.628749] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input11
    [ 3.631116] acpi device:51: registered as cooling_device11
    [ 3.631300] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 3.631373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
    [ 3.631455] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 3.645951] i2400m_usb 4-1.3:1.0: WiMAX interface wmx0 (64:d4:da:24:b5:c0) ready
    [ 3.653985] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.654187] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
    [ 3.874277] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.874474] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
    [ 3.963960] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4.328298] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 7.107250] i2400m_usb 4-1.3:1.0: firmware interface version 9.3.2
    [ 7.117012] usbcore: registered new interface driver i2400m_usb
    [ 7.141746] wlan0: authenticate with 00:22:6b:70:c5:e9
    [ 7.151167] wlan0: send auth to 00:22:6b:70:c5:e9 (try 1/3)
    [ 7.197933] wlan0: authenticated
    [ 7.200356] wlan0: associate with 00:22:6b:70:c5:e9 (try 1/3)
    [ 7.201891] wlan0: RX AssocResp from 00:22:6b:70:c5:e9 (capab=0x11 status=0 aid=2)
    [ 7.205520] wlan0: associated
    [ 7.205524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.681425] bbswitch: version 0.7
    [ 16.681440] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 16.681445] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 16.681454] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 16.681520] bbswitch: detected an Optimus _DSM function
    [ 16.681556] bbswitch: disabling discrete graphics
    [ 16.681559] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 16.711802] pci 0000:01:00.0: power state changed by ACPI to D3cold
    [ 16.711812] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
    [ 41.636100] fuse init (API version 7.22)
    [ 440.485588] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 440.507912] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 453.967678] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 453.984936] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    I have never seen this error and my googlefu return issues with overclocking which I am not doing. Any info on the subject I'd love to hear.
    Cheers.
    EDIT: Was only happening when issuing 'systemctl reboot' so I switched back to 3.10.10-1-ARCH and reboot command now works.
    Last edited by doug piston (2013-09-10 02:05:56)

    Well, I can tell you that this kind of error is not OS related, but rather a HW thing.  It happens where there is a general detection of something going wrong.  Sometimes it can happen randomly and might not be an indication of a problem.  But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors. 
    Unfortunately I don't really know what to do about such things except give you machine a proper inspection.  But if things are working fine, and continue to do so, I wouldn't worry about it.  If it becomes a regular occurance, then I'd worry.

  • The user name or password is incorrect in the CRM system checks during installation

    Hi everyone
    I'm installing CRM 2013 on 2 servers (server 2012) - CRM Full server + SQL Server 2012.
    I created 2 service accounts for this - CRMSVC + CRMSANDBOX (one for sandbox and another one for all the rest).
    I'm getting the following error in the system checks during setup:
    I've verified a billion times that the service accounts and passwords are valid - I even tried using different service accounts - same problem. As for now I also added the service accounts to the local admins groups just to be sure that it's not some permissions
    issue (I also added them to the 'log on as service' & performance logs groups). 
    If i try to use NETWORK SERVICES instead of a service account - the installation goes through flawlessly - no issues at all.
    I'm also gonna say that i tried another installation on a fresh server - SAME ISSUE.
    So for now my ideas are either it's a GPO somehow blocking the service accounts - or some kind of other security issue.
    I also found out that the security event log shows these two errors when these show up in the system checks:
    Inside i found 'NULL SID' entry - it does not recognize the service accounts account and 0xC0000064 in the Sub
    Status Codes
    It's not a typo issue so don't bother - if i write a wrong password in purpose - it actually says that the password i typed for domain\service account is incorrect - here it seems that the service account is not being recognized.
    Any ideas anyone?
    Thanks
    Please vote if you find my post helpful - Thanks

    Not sure you understood my point.
    The installation process necessarily runs under the account of the installing user. The installation will query AD to identify information about the service accounts, and will add them to the relevant CRM AD groups. It is possible that the installing user
    account does not have sufficient privileges on the AD objects for the service accounts to be able to identify them, and to add them to groups. This scenario is consistent with the errors that you get, and also with being able to install CRM to run under NetworkServices
    (which doesn't have its own AD object)
    Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk
    Hi David
    I understand this, but as far as i know running it under NETWORK SERVICES will add the machine names to the OU security groups - hence the user installing still needs to have delegated permissions on that OU. Anyway as mentioned above - ignoring the checks
    and running the installation solved this and also added the accounts to the security groups - so this whole mess looks like some bug to me - not sure i will ever find out what it was :)
    Please vote if you find my post helpful - Thanks

  • Number of System Log Errors Increasing During Nightly Backup - What Can Be Done?

    Right now, I'm getting quite a number of warnings and errors with my nightly (wbadmin) backups to external USB drive using Windows 8.1 and the Spring Update.  Fortunately, the VSS-integrated system image backups are still sound, but it seems as though
    Windows 8.1 is becoming less and less aware and tolerant of them.  That's not right!
    With Windows 8.1 before the Spring Update I was seeing the warnings, but not the FilterManager errors.  The update brought the errors.
    Perhaps not too many Windows 8 users use wbadmin start backup -vssFull commands to do their backups, but I'm sure a lot of folks running Server 2012 do.
    What can be done to make the backup process smoother and eliminate these warnings and errors?
    Here's the specific list of warnings / errors I got from last night, which started at 2:00am and ran to 4:26am:
    As usual, clicking the Event Log Online Help button yields:  "We're sorry, but the page you requested could not be found.  You can search on TechNet for more information."  Microsoft, you know that needs to be fixed too, right?
    The specific command I'm using, via the Task Scheduler, is:
    wbadmin start backup -allCritial -vssFull -quiet -backupTarget:G:\
    For those who might suggest 3rd party backup, bear in mind I very much want the VSS integration that Windows Backup provides, and while wbadmin is producing backups that can actually be restored I can ignore these warnings and errors.  But it would
    be nice to not have them.
    And yes, I've considered 3rd party backup solutions, but while wbadmin is producing VSS-integrated system image backups that can be restored from the Windows startup recovery environment I'd prefer those.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

    The errors suddenly stopped on their own, but the warnings continue.
    As with most software issues, the errors came back again, specifically after a reboot mandated by yet another Windows Update.  I'm assuming they stopped before because the Filter Manager just gave up, or maybe the volume numbers got too high (notably
    the volume numbers started over again at a lower number).
    As of last night, these messages apparently having to do with my wbadmin backup (which starts at 2am) were logged in my System Event Log:
    2:00:00 (Information) - Virtual Disk Service - Service started.
    2:01:52 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume System Reserved (\Device\HarddiskVolumeShadowCopy22) is healthy.  No action is needed.
    2:02:15 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume C - NoelC4 SSD (\Device\HarddiskVolumeShadowCopy23) is healthy.  No action is needed.
    2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\SYSTEM (TM: {5df557d3-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d2-c9aa-11e3-829a-1803734ec99c}) finished with
    result=0xC00000A2 (Internal code=7).
    2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\DRIVERS (TM: {5df557d5-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d4-c9aa-11e3-829a-1803734ec99c}) finished with
    result=0xC00000A2 (Internal code=7).
    2:02:21 (Information) - Kernel-General - The access history in hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Users\default\ntuser.dat was cleared updating 528 keys and creating 29 modified pages.
    2:02:25 (Information) - FilterManager - File System Filter 'FsDepends' (6.3, ?2013?-?08?-?22T07:39:42.000000000Z) has successfully loaded and registered with Filter Manager.
    2:02:27 (Warning) - disk - Disk 5 has been surprise removed.
    2:02:29 (Warning) - disk - Disk 5 has been surprise removed.
    2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:02:45 (Warning) - disk - Disk 5 has been surprise removed.
    2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
    2:19:55 (Warning) - disk - Disk 5 has been surprise removed.
    2:20:04 (Warning) - disk - Disk 5 has been surprise removed.
    2:30:00 (Information) - Virtual Disk Service - Service stopped.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

Maybe you are looking for