CHARM Configuration Error - No Consolidation System

Hi
Im facing following errors in solution manager's CHARM.
No consolidation system found for SSD-150 (project ZCHARM_GIL)
No track for project ZCHARM_GIL with log. system SSD/150
i have more queries.
1.solar_project_admin > system Landscape> systems i have following config
Logical Component : SAP SOLUTION MANAGER
Product: SAP SOLUTION MANAGER [Solution Manager ABAP Stack]
Product Version : SAP SOLUTION MANAGER 7.0
DEvelopment SYstem : SSD: 150 ( SSD is my solution manager SID)
QAS : Blank
PRD : Blank
Do i need to maintain values GSD , GSQ , GSP (satelite system DEV, PRD, GSP)
2. in my satelite system DOMAIN_GSD transport route
System GSD - GSQ Transport Group - System GSQ
             /GSQTRG
System GSD : Transport Stratergy - Mass Transport Checked
          Transport Layer - ZGSD
target group: /GSQTRGRP/ GSQ 200
                GSQ 300
System GSD : Transport Stratergy - Mass Transport Checked
          Transport Layer - NONE
Transport Route : GSD - ZGSD/SAP - /GSQTRG - 300/200- GSQ
Can i configure charm with above scenarion where transport groups have been defined

Hi
This error occurs if you dont define the client dependent tms route in satellite system.
First visit this blog
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
then in spro change request management general settings....visit the img help for TMS settings of
further
TMS
TMS Setup
http://help.sap.com/saphelp_nw04/helpdata/en/14/c795388d62e450e10000009b38f889/frameset.htm
more help
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
Regards
Prakhar

Similar Messages

Configuration error description: The system cannot find the path specified

Overall summary:
Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal):           -2068643839
Exit facility code:            1203
Exit error code:               1
Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time:                    2012-10-26 00:24:37
End time:                      2012-10-26 00:32:07
Requested action:              Install
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xF57C3D6F%400xFB92A9BB
Machine Properties:
Machine name:                  TEST-PC
Machine processor count:       4
OS version:                    Windows Vista
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2008      SQL                  MSSQL10.SQL
Database Engine Services                 1033                 Standard Edition
10.0.1600.22    No
Sql Server 2008      SQL                  MSSQL10.SQL
SQL Server Replication                   1033                 Standard Edition
10.0.1600.22    No
Sql Server 2008      SQL                  MSSQL10.SQL
Full-Text Search                         1033
Standard Edition     10.0.1600.22    No
Sql Server 2008      SQL                  MSAS10.SQL
Analysis Services                        1033
Standard Edition     10.0.1600.22    No
Sql Server 2008      SQL                  MSRS10.SQL
Reporting Services                       1033
10.0.1600.22    No
Sql Server 2008      TEST                 MSSQL10.TEST
Database Engine Services                 1033                 Standard Edition
10.0.1600.22    No
Sql Server 2008      TEST                 MSSQL10.TEST
SQL Server Replication                   1033                 Standard Edition
10.0.1600.22    No
Sql Server 2008      TEST                 MSSQL10.TEST
Full-Text Search                         1033
Standard Edition     10.0.1600.22    No
Sql Server 2008      TEST                 MSAS10.TEST
Analysis Services                        1033
Standard Edition     10.0.1600.22    No
Sql Server 2008      TEST                 MSRS10.TEST
Reporting Services                       1033
10.0.1600.22    No
Sql Server 2008      SQLSERVER            MSSQL10.SQLSERVER              Database Engine Services
1033                 Enterprise Evaluation Edition 10.0.1600.22    No
Sql Server 2008      SQLSERVER            MSSQL10.SQLSERVER              SQL Server Replication
1033                 Enterprise Evaluation Edition 10.0.1600.22    No
Sql Server 2008      SQLSERVER            MSSQL10.SQLSERVER              Full-Text Search
1033                 Enterprise Evaluation Edition 10.0.1600.22    No
Sql Server 2008      SQLSERVER            MSAS10.SQLSERVER               Analysis Services
1033                 Enterprise Evaluation Edition 10.0.1600.22    No
Sql Server 2008      SQLSERVER            MSRS10.SQLSERVER               Reporting Services
1033                                      10.0.1600.22
No
Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             Database Engine Services
1033                 Express Edition      10.1.2531.0     No
Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             SQL Server Replication
1033                 Express Edition      10.1.2531.0     No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Database Engine Services
1033                 Standard Edition     10.0.1600.22    No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            SQL Server Replication
1033                 Standard Edition     10.0.1600.22    No
Sql Server 2008
Management Tools - Basic                 1033                 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Management Tools - Complete              1033                 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity                1033                 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility     1033                 Enterprise Evaluation Edition 10.0.1600.22    No
Sql Server 2008
Client Tools SDK                         1033
Enterprise Evaluation Edition 10.0.1600.22    No
Sql Server 2008
Integration Services                     1033                 Enterprise Evaluation
Edition 10.0.1600.22    No
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         C:\instal_sw\SQL Server 2008\SQL Server 2008\x64\setup\
Installation edition:          EVAL
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      False
AGTSVCACCOUNT:                 NT AUTHORITY\SYSTEM
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Automatic
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASDOMAINGROUP:                 <empty>
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 *****
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
ENABLERANU:                    False
ERRORREPORTING:                False
FEATURES:                      SQLENGINE,REPLICATION,BOL,SNAC_SDK,OCS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD:                 *****
HELP:                          False
INDICATEPROGRESS:              False
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    sqlserver2008
INSTANCENAME:                  SQLSERVER2008
ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
MEDIASOURCE:                   C:\instal_sw\SQL Server 2008\SQL Server 2008\
NPENABLED:                     0
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
RSINSTALLMODE:                 FilesOnlyMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 *****
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  SQL
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT AUTHORITY\SYSTEM
SQLSVCPASSWORD:                *****
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           Test-PC\Test
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  False
TCPENABLED:                    0
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature:                       SQL Server Books Online
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Microsoft Sync Framework
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\SystemConfigurationCheck_Report.htm

Hi Maggie,
Even i am facing the same problem while installing sql server 2008 R2 on windows server 2012 R2
The required error message is provided below:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-11-24 06:23:13
End time: 2014-11-24 06:47:19
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xCEC86A55%400xFB92A9BB
Machine Properties:
Machine name: M2MBUILDTEST01
Machine processor count: 2
OS version: Windows Server 2008
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\SQL Server 2008\Developer RTM\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: swg\gverma
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: swg\gverma
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SWG\gverma
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\SQL Server 2008\Developer RTM\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: SWG\gverma
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: swg\gverma
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SWG\gverma
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\SystemConfigurationCheck_Report.htm

Configuration Error: No CM system assigned to this task.

Hi,
I get the error "Configuration Error: No CM system assigned to this task." when I try to run a crawler for a newly created index.
This TREX instance is shared by other portal environments too but the other portal environments behave fine.
Any ideas?
Best Regards,
Kumar

Following is the fix:
CM Systems had to be added to the Scheduler tasks.
Ref:
http://help.sap.com/saphelp_nw04/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/4be37ce885d048a2a04709018f6bf1/frameset.htm
Also, this environment had two server instances. The nameserver configuration should be on the global level so that the changes take effect on both servers.
Regards,
Kumar

Charm configuration for a 4 system landscape

Hi Experts,
We are planning to implement charm for a 4 system landscape: Development Server, Integration Server, Quality Server and Production Server.
We could configure TMS related steps, activated Charm in Solution Manager, created a maintenance project in solar_project_admin.
However, the standard delivered transaction types like Normal correction and Urgent Correction are not working in a 4 system landscape. They are only working for 3 systems (DEV, QAS and PRD).
Are there any documents or blogs that would specially explain all the steps required for 4 systems? Any kind of help would be highly appreciated.
Thanks,
Ravali

Development --> Integration --> Quality --> Production.
First, I will import the transport of copies into integration
Yes, and you test the changes here.
Second, the whole transport is released and imported to Integration - in the Test phase of the maintenance cycle and NC status being consolidated.
Third - Now, keeping the maintenance cycle in the TEST phase and NC phase in consolidated, will I be able to schedule the transport into quality server?
Nope. You consolidate your normal correction, which releases your original transport and import them into Integration, and then immediately into Quality (you already proved it worked in Integration) BEFORE you set the phase to Test. Otherwise the original transports are NOT released. And if you set your phase to Test before importing the originals, you'll get a message that you cannot import transports into Quality during this phase.
If you need to get transports into Quality for break fixes during the Test phase you need to use a Test Message and these are imported during Go-live as well.
Fourth - if the above process works, I will then change the MC to Go Live and schedule the import to Production.
With the corrected process mentioned above, yes, you will then change the phase to Go-live and it will import everything that was brought into Quality.
Hope this helps.

Solution Manager Charm configuration

Hi @all,
I´am using SAP Solution Manager 7.0 SP 15. Configurated all Charm Steps successfully.
The SAP Solutoin Manager - Scenario- Specific Settings - Change Management - Extended Configuration -Checks - Execute Check Report is green
I can´t open any hance cycle in solar_project_admin - System Landscape - Change Requests , Create Task List, I get the result "project is not released. hance cycle can not be created".
If i click "check", there are three errors:
Message from function module /TMWFLOW/CALC_SINGLE_TRACK: No source system
(Message no. /TMWFLOW/TRACK_N103)
No track for project DF_WART_01 with log. system A36/200
(Message no. /TMWFLOW/CM_CHECK038)
CTS projects in production systems for project DF_WART_01
(Message no. /TMWFLOW/TASKLIST190)
System change options are empty.
In my authorized Change Requests - related documents (next document). i get "there are no actions in the Worklist"
i´ve no idea where my fault is. I hope you can help me.
Please suggest.
Best Regards
Daniel

Now I have created a new maintenance project, I´ve configured everything, when I check it, I get two errors:
No consolidation system found for A36-200 (project DF_SOLMAN1)
Message no. /TMWFLOW/TRACK_N806
No track for project DF_SOLMAN1 with log. system A36/200
Message no. /TMWFLOW/CM_CHECK038
I noticed that this thread is pretty old already but I bumped into similar error messages and in the end it was caused by a TMS route configuration that didn't match the configuration of the logical component that was in use.
You can pretty easily verify this through SMSY. Navigate to your logical component there, select the line of the system assignment and click on Shipment Routes button. If you get an empty screen back, then your TMS transport route configuration doesn't match your logical component configuration.
For example, you've got DEV 100 - DEV 200 - PRD 100 for a CHARM demo landscape. If your TMS transport route configuration matches this but your logical component has DEV 100 assigned as Quality Assurance, then your configuration check for CHARM will fail because there is a mismatch.
When your configuration is correct, so both your TMS transport route as your Logical Component (system role assignment), then you should get a transport route configuration back (visible) after clicking Shipment Routes.

Transport to consolidation system doesnot reflect in components

Hi There,
We have configured a separate Consolidation system for our WebDynpro developments. and we are using TCS for deployment. After import to consolidation system and TCS deployment , changes are not reflecting in Consolidation system.
We defined new track and its components and after initial imports we got development configuration in Development studio and made changes.
Thereafter we have followed these steps
1) We released and transported all our changes from Webdynpro Studio.
2) started Import on Consolidation tab and all components were successfully imported.
3) started TCS deployer for selected track_c and that also completed, without any error messages
4) test in consolidation system shows webdynpro changes have not been moved.
This is first round of imports on this track, if there is anything we might have missed out.
Please suggest.
Thanks a lot for your time.
Rgds

Solved this..
Created one more request with application files and followed the cycle.. and this time it deployed application. Weird though worked.
Cheers

No consolidation system found for SID in solman

Dear All
I am configuring Change Request Management is Solution manager EHP1
I have created required Domain Link in Solman and satellite (dev) system
And it is working fine
When I am creating project in System LandscapeChange Request under
Project Landscape, Activate Change Request Management tick
It gives me following error when I click on Check button
Error:-     No consolidation system found for SID-300 (project SOLMAN_CON)
Error:-      No track for project SOLMAN_CON with log. System SID/300
Error:- Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for SID-300
Pl suggest
Regards
Gopal

Hi,
My Transport route looks something like
[System GND] ZGND > 300 [System GNQ] 300> 300 [System GNP]
Its a standard 3 system landscape with transport routes configured as mentioned above. I followed the write up as mentioned and have kept only one transport route but how do i create a transport route from GND-140 to GNQ-300 .
The layer ZGND has been associated with client 140 which is the development client here. The layer ZGND is the consolidation layer, how else should i associate it with the client 140.
Please advice.
Regards
Ankan

CS5: Configuration Error 3 I NEED HELP SOMEONE PLZ

I have the configuration error 3
My system requirements are:
Windows 7 Home Premium 64 bit
Pentium Dual Core CPU T4200 @ 2.00GHz
4.0 GB RAM
Moblie Intel 4 Series Express Chipset Family
SOMEONE HELP :c
thnks:)

And more specifically? When do you get the error? On install or what? If yso, do you install with sufficient user privileges? are your security settings toned down to allow such operations? Anything else we may need to know aside from this being some sort of notebook?
Mylenium

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Error in CHARM configuration to move JAVA objects 'The project is not relea

Hi,
I have BI 7.0 (ABAP + JAVA) landscape (i.e. CBD, CBQ and CBP) on SPS12 and SolMan 7.0 (SMD) on SPS14. My goal is to move both ABAP and JAVA transports through CHARM. I performed following tasks:
1. Configured TMS by selecting CBD as Transport Domain controller to move Java transports
2. Configured CHARM for BI landscape to move ABAP transports in SMD and it is working fine
3. Configured CTS+ to move JAVA transports on SMD instead of CBD because CTS_BROWSER service is not available on CBD due to SPS12. While configuring CTS+ in SMD, I used SIDs for BI Java landscape as reverse SID (i.e. DBC, QBC and PBC) and used mapping parameter to map to original SID. I used reverse SID because already in SMD (CBD, CBQ and CBP) has been defined for CHARM purpose. Now, I am able to move successfully JAVA transports of BI landscape from SMD.
4. I am having issue in configuring CHARM on SMD for JAVA transports. I am following http://service.sap.com/solutionmanager --> Media Library --> TechnicalPapers --> How to Set Up and Use eCTS/ChaRM Solution Manager 4.0 SP12 document. Following are the steps, I performed to move JAVA transport through CHARM:
     a. Defined JAVA systems (i.e. DBC, QBC and PBC) in SMSY as Enterprise portal systems
     b. Defined ABAP system (i.e. Where Transport request is created, in my case it is SMD) in SMSY
     c. Defined logical component for both ABAP and JAVA systems
     d. Defined solution manager project by adding two logical components created at step C (i.e. ABAP and JAVA)
     e. I am getting error when I am trying to activate CHARM and create task list. The error is as follows:
/TMWFLOW/TRACKN 101: 'Warning: Problems occurred during synchronization of the system landscape'.
If you choose 'Check', the system displays the following message in the results list of the check:
/TMWFLOW/TRACK_N 806: 'No consolidation system found for SMD-200 (project zjava3)'
If you try to create a task list by choosing the relevant pushbutton, the system issues message
/TMWFLOW/CONFIG_UI 017: 'The project is not released. Hence cycle can not be created'.
I found a relevant sap note for this 1054264 but it is not useful me, as it suggest to upgrade SolMan to SPS12 but whereas I am on SPS 14.
Any suggestion are welcome. Thanks in advance.
Regards
Shiv

Hello
You should first fix the errors you get such as the missing consolidation system
Please see thread [Re: No consolidation system found for SID in solman; or check the forum on the error message "'No consolidation system found for" and you will find relevant information.
I would advise to update your SAP Solution Manager though to one of the latest available levels, there are a lot of fixes and enhancements to Charm (and also availability of quality gate management which gives some of the functionality of Charm but is more compact).
Kind regards
Tom

CHARM activation check failing on "consolidation system for development system SSA-200 in project ZTEST2

Hello,
We are implementing Charmlite and want to activate in project landscape.
We are Solution Manager 7.1 SP11 and testing this scenario in sandbox.
Steps completed:
1. in sandbox domain controller, created two virtual systems and made 3 system landscape, where, I can release the transport and see it in QA system (Virtual system buffer)
2. The LMDB has been updated with Virtual system and in SMSY, the entries of virtual system shows up. The logical components have the client information.
Issue:
in /nsolar_project_admin ->System landscape -> change management, When consistency check is performed, we get error message saying
Virtual RFC is miising (I am guessing, it should be okay)
The logical component is incosistent (This might be the reason the CHARM is not getting activated.
"No consolidation system for development system SSA-200 in project ZTEST2
No track for project ZTEST2 with log. system SSA/200"
For me, when i look in satellite system, the consolidation system is a virtual system and it should be fine.
Please advise
Regards,
Durga PK Saitana

Thank you Karthik. Still the problem persists
I went through the blog earlier. I created l ABAP instance manually in SLD and moved into LMDB and can see the entry in SMSY. (I did not see any option of putting virtual flag)
We were trying harmonization of RFC from note 1384598 and since we had virtual systems, went with domain links.
After domain links, the virtual systems are read. the Dev ABAP system is not able to find the consolidated system. In the satellite system, I can release transport and move the transport.
Not sure, why this issue is persistent.

Error when creating Task List: No Consolidation System found

All-
Configuring my Retrofit Scenario. My Project Landscape is maintained as following:
Dev(100) --> QA (200) --> Prod (300) with Retrofit (XXX)
Dev(XXX) --> QA 250
I am getting this error when I try to refresh the project or create a Task List
*No consolidation system found for <SID>-250 (project RETROFIT3)
Message no. /TMWFLOW/TRACK_N806*
If my QA client (250) is already maintained as a QA logical component. What else is missing?

Hi,
I have done something similar and getting error /TMWFLOW/TRACK_N806
My Transport route looks something like
System GND ZGND > 300 System GNQ 300> 300 System GNP
Its a standard 3 system landscape with transport routes configured as mentioned above. I followed the write up as mentioned and have kept only one transport route but how do i create a transport route from GND-140 to GNQ-300 .
The layer ZGND has been associated with client 140 which is the development client here. The layer ZGND is the consolidation layer, how else should i associate it with the client 140.
Please advice.
Regards
Ankan

Error in Managed System Configuration - Sol Man 7.1

Dear Experts,
Whle configuring using solman_setup, I am getting below mentioned error in Managed System Configuaration:
Cannot retrieve CIM Instances from CIM Class 'SAP_DiagnosticsRelevantSoftwareFeature'!
Cannot retrieve all CIM Instances from CIM class name 'SAP_TechnicalScenario' via LMDB Mass Access API!
Cannot retrieve all CIM Instances from CIM class name 'SAP_DatabaseSystem' via LMDB Mass Access API!
Any suggestions??
Regards
Vivek

Hi Paul ,
Thanks for the note that you provided.
I am reconfiguring the LMDB and conteny Sync... The refresh will take 15-16 hours.. I am just waiting for the
sync to be finished. Let's see what is in the store for me
Keeping my fingers crossed untill then.
Regards
Vivek

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

I completed a full system recovery. Still getting a configuration error. (code purple).

I have a completed a full system recovery using vista. completely redid the hard drive with recovery disk. When startup occurs, I get a message saying a configuration error. contact HP. (code purple). Is this a hard drive issue? Help where to go next.

***Windows 7 code purple or Windows Vista code purple***
With the code purple error on the screen, press shift+f10 (the shift key and the F10 key (at the top of the keyboard) at the same time) to open a little screen called a command prompt. (So, you get a little black screen with white text that says something about your Windows verison first and a little ways down you'll see "C:\>". It's all ready for you to start typing.)
Type the following line, just as you see it here...
notepad C:\hp\bin\checkdmi\checkdmi.cmd
so it will look like this
C:\>notepad C:\hp\bin\checkdmi\checkdmi.cmd
Press Enter.
You will see the text for the file listed in a window using a simple text editor.
Go to the beginning of the text. Press enter to make a space. Type this...
goto cleanup
So, whatever comes after, the first line looks like this...
goto cleanup
Save the file and exit notepad and restart your PC. You are good to go.

CHARM Configuration Error - No Consolidation System

Similar Messages

Maybe you are looking for