ChaRM: Description of User Status

Dear Experts,
I've added some statusses to the existing User Status Profile SDMJ (I know I should create a Z* copy, however it is only as test in our DEV system).
As we are using ChaRM, every status change is recorded in the Overview text.
When the status is changed to one of the new added statusses, the message is i.e. 'Status has changed to E00016' instead of the full description of that status.
However I've maintained the new statusses in language DE and EN (and logon language is EN).
Anybody an idea where else to maintain these descriptions?
Thanks in advance.
Best regards,
Roel

Hi,
check SPRO -> ... ->  ChaRM -> Change Transaction Types -> Define Status Attributes
You need to maintain an entry for your transaction type / status profile / status combination.
After that you will see the correct name instead of technical name.
/cheers

Similar Messages

  • CHARM: How the user status is updated for the documents

    Hi Experts,
    I want to know how a particular status is set for a document. In the configuration, we maintain status table where in all the statuses are defined and hence the same is assigned to the document. We also make use of default method in one of the actions, such as:
    Sets user status according to container element USER_STATUS
    How a status is set for each action in the action list? Do we pass any value to the above mentioned method so that it can set the same?
    If I am not wrong, this default method simply sets the user status according to the value available in USER_STATUS (as per the description of the method). But, where we are setting this variable/element?
    May any one please help me understand this? Your help will be highly appreciated.
    Regards,
    Faisal

    Hi Faisal,
          I dont know if I get your question very well, but in transaction SPPFDCADM you cant control this method. For example, select CRM_ORDER, then "Define Action Profile and Actions", select "SDHF Actions" , then "Action Definition", select "IN PROCESS", then "Processing type", there if you hit "Display definition" you will see the parameter this action is sending to the method (the parameter is the user status to be set).
    Hope that helps,
    Federico

  • CHARM: two Change Managers in an solution manager -  SDMN user statuses

    Hi to all
    I'm trying to handle two change Managers in the one CHARM client , each of them has own project and own system landscape for which he is responsible. I'm trying to restrict them, with well known charm authorizations of Change Manager,  in a way that each of them  should be able to handle just his own project and project assigned  SDMN transaction type.   
    So far I've managed to restrict Change Manager to just one Task list with the  authorisations object B_SMAN_WPL  but this authorizations object is related just to the SDMN Task list but  not to the User statuses of the SDMN transactions type!!
    If you will restrict Change Manager role  just to one task list (for example M*11)  with the above auth.  object (B_SMAN_WPL) it will be able to handle just this task through the SDMN drop down actions  task "Go To Task List" no others task list should be usable. So in this case your Change Manager is restricted to just one Task list. Thanks to "B_SMAN_WPL"!!
    But
    ....if the  same Change Manager should go to edit  the new SDMN transactions (for example with the task list M*22) , Change Manager should not be able to edit/change, the Task list itself (he is restricted by B_SMAN_WPL ), but it should be able to change User Status of corresponding  SDMN! - To Move phases back and forth!?? How Come?
    How can  we  restrict Change manager to be able to handle just SDMN - which belongs to the certain project that is defined inside of authorization object S_PROJ_GEN.?
    waiting for SDN response )

    I've just returned from the Hyperion conference here in South Africa. In one of the papers presented a BI consultant was using dynamically updated MaxL scripts to update dimensions and members within them. She had developed a VB front-end with MS Excel as the back-end. She was using the excel to pass parameters to the MaxL scripts and so controlling what was being updated on the model. The VB front end only allowed certain dimensions to be updated.Regards,Fraser

  • Charm: User Statuses error "Status is not allowed"

    Hello,
    We have created some additional statuses for SDHF. When I look at the log in status tab of the record I see the errors
    User status ANGE must not be deleted
    Status PROC is not allowed (Service Process 742)
    The user status 'E0002' must not be set         
    Status ZUTE is not allowed (Service Process 742)
    The user status 'E0004' must not be set         
    Status Test is not allowed (Service Process 742)
    The user status 'E0005' must not be set         
    Status PROD is not allowed (Service Process 742)
    The user status 'E0006' must not be set         
    Status Conf is not allowed (Service Process 742)
    The user status 'E0007' must not be set         
    Status ABGE is not allowed (Service Process 742)
    The user status 'E0008' must not be set         
    Status REL is not allowed (Service Process 742) 
    The user status 'E0009' must not be set         
    Status CANC is not allowed (Service Process 742)
    The user status 'E0010' must not be set         
    Status ZCFS is not allowed (Service Process 742)
    The user status 'E0011' must not be set         
    Status ZFSC is not allowed (Service Process 742)
    The user status 'E0012' must not be set         
    Status ZBPO is not allowed (Service Process 742)
    The user status 'E0013' must not be set         
    Status ZBPA is not allowed (Service Process 742)
    The user status 'E0014' must not be set         
    Status ZCTS is not allowed (Service Process 742)
    The user status 'E0015' must not be set         
    Status ztsc is not allowed (Service Process 742)
    The user status 'E0016' must not be set       
    The help on this shows:
    Status Conf is not allowed (Service Process 742)
    Message no. BS042
    Diagnosis
    The user status 'Conf' has reference number 70.  In the current object status 'Service Process 742', the reference number of a status may not be higher than 10.
    Procedure
    You can only set user status whose reference number is not higher than 10.
    Anyone know where this value of 10 comes from?
    Any idea how this can be fixed?
    Regards,

    Hi,
    Check the Status Profile of SDHF in CRMBS02.
    Chk the Lowest and highest value against the Status.
    Thnx,
    Waseem.

  • CHARM how to add new user status to change document

    Can someone please suggest how to add a new user status to a change document ?
    I am looking into adding status "Pending" to Admin correction SDAD.
    Thank you in advance
    Elena

    Hello,
    Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
    SAP Solution Manager
    -> Scenario-Specific Settings
      -> Change Request Management
       -> Extended Configuration
        -> Change Request Management
         -> Change Transaction
          -> Change Transaction Types
            o Define Status Attributes
    Also activity "Make Settings for Change Transaction Types" in the same path is important.
    Best regards,
    Miguel Ariñ

  • ChaRM sending e-mail at user status confirmed

    Desired task:
    Sending e-mails in change management process with condition configuration using user status
    Partially solution:
    Define actions and conditions in ppf with "processing time" = "processing using selection report" and execute these action by report rsppfprocess, BUT
    Problem:
    If you would like to send an e-mail after action "confirm change", the described solution doesn't work, because in Solution Manager status will be change within method call HF_SET_STATUS and not directly like in Service Desk or other CRM Transactions.
    Question:
    Is there any other solution to send emails in Change Szenario? Probably in Alert Management or 'Actions in Change Request Management / BAdI-Extension Implementation?
    Thanks for any hints.
    Best regards,
    Stephan

    Hi,
    I am glad to hear it is possible.
    Yes I created the action under SDCR
    The Partner-Dependent is checked and Partner Function is given as SDCR0002(Change Manager) under Partner Determination for this action.
    What action merging did you use? I have tried u201CSet Highest Number of Processed Actionsu201D and u201CMax. 1 Unprocessed Action for Each Action Definitionu201D
    But it is still not working.
    In the message I select the Transaction Data tab, then the Actions tab, and check if the action is triggered. I do not see my action appearing here.

  • User exit/BADI for tracing change of User Status in IW22

    Hello,
    I am looking for a user exit or BADI that triggers whenever ther's a change made to User status field.
    eg. changing user status to APTC(Approved to be executed)
    I then need the exit/badi to trigger my workflow to send mails to list of reviewers. I can handle that but I am not able to find the suitable exit.
    I have seen BADI IQS0_STATUS_MAINTAIN, but no use.
    Can anyone help?

    Hi..
    Transaction Code - IW22                     Change PM Notification
    Enhancement/ Business Add-in            Description
    Enhancement
    IWO10026                                User check on setting status 'Do not perform'
    IWO10027                                User exit: Generate user-defined settlement rule
    IWOC0001                                Create PM/SM notification: Determine reference object
    IWOC0002                                PM/SM notification: Check whether status change is allowed
    IWOC0003                                PM/SM authorization check of ref. object and planner group
    IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
      Business Add-in
    WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
    NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
    IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
    IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
    IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample
    IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
    IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
    No.of Exits:          6
    No.of BADis:          7
    Arunima

  • Can we set user status in tj30 ?

    Hi all,
    can we set user status in tj30 ?
    i've created a new status profile and it seems SAP automaticaly generate all of status in my status profile to table tj30.
    but the data in column estat of table tj30 that created is started from E0001.
    can we set the data start from certain number ( for example : from E0060 ) not from E0001 ?
    or can we update it from E0001 to E-something ( for example : to E0056 ) ?
    please advice or breif me.
    many thanks in advance

    Hi Eddhie,
    You must perform the following steps manually:
    1. Transaction SPPFCADM
    2. Select the application
                  "CRM_ORDER"
    1. Click 'Define action profiles and actions'
    2. Select the action profile (if you are using the standard action profile)
                  "SMSD_SERVICE_ORDER_DNO"
    1. Double-click 'Action definition'
    2. Select the action
                  "SMSD_SRVC_ORDER_DNO_SAP_UPDATE"
    1. Double-click 'Processing types'
    2. Go to the change mode using the 'Display/change' button
    3. Press the "Change" button in the screen area "Method call settings" in the line "Define processing parameters".
    4. Click the 'Create' pushbutton in the dialog box that is then displayed.
    5. Enter the following data:
    a) Element: USER_STATUS
    b) Name: USER_STATUS
    c) Short description: USER_STATUS
    d) Data type tab, ABAP dictionary reference
                             Structure TJ30
                             Field ESTAT
    e) "Initial value" tab page, entry "E0060" in the field USER_STATUS (or another allowed user status from the status profile used if desired).
    f) Copy the entries.
    6. Save
    Check OSS Note (663970) for more detail.
    Please award points if the solution is helpful.
    Thanks
    Sumi

  • For Budget release / supplement  User status

    Hi Experts,
    In project i m using a user status for taking approval / release budget .
    Description                   Lower                         Highest
    initial                               1                                   2
    bud planning                   2                                  3
    bud release                    3                                  4
    release                           4                                  5
    execution                       5                                  5
    Here, after getting approval / Release budget i have to change staus manually (based on authorization).
    Now here i want that when i add supplement budget then once again system should go on bud planning and authorized person change the status (from bud planning to bud release).
    For this in OK02 i had set Bud Supplement on Bud Planning. (According to that while budget is supplement then status go back on bud planning).
    Here i m little bit confused that wt level i have to select here between lower and highest. (i m taking the same level as shown above)
    While testing this, i m not getting the required ans..
    pls suggest me if i m doing something wrong.
    Regards,

    Hi,
    Description Lower Highest
    initial 1 2
    bud planning 2 3
    bud release 3 4
    release 4 5
    execution 5 5
    Please understand this, if you want to move form bud release to bud planning, then lower limit of bud release should be 2 not 3.
    as per your settings system would not move from one status to its previous status.
    Lower limit is what ever the status number it scan move backwards, understand this basic concept & apply it as per your requirement, I have just explained one scenario here.
    Thanks
    SL

  • User exit to change user status in IQ01/02 after full installation EG31

    Hi Experts,
    In iq01 there are two fields 1 device status 2 user status . device status will be automatically changed (avlb to insl) by system  after full installation  but  i need to change the user status (AVLB, NTAV) in iq01.I have created one bdc for iq02 and that will be properly changing the staus if i run seperately  but when  i am calling this bdc in user exit(EDMDI001,EDMDI002,EDMDI003) this shows one error '
    device is already blocked bu user ---" reason being i have to use that device at the time of full installation and user exit that will change the staus also working on  the same device during full installaion .
    So Please resolve.
    Thanks in advance
    Edited by: dilipgupta on Jan 12, 2011 3:02 PM

    Hello
    dilipgupta
    try this:
    Exit Name           Description
    E07                 IS-U: Geräteinstallation und Anlagenstruktur
    EDMDI001            Kundeneigene Vorschlagswerte für Einbau, Ausbau, Wechsel
    EDMDI002            Kundeneigene Prüfungen für Einbau, Ausbau, Wechsel
    EDMDI003            Kundeneigene Daten zur Warenbewegung bei Ein-und Ausbau
    regards
    Chris

  • User Status Profile for Notification PM

    Dear Masters,
    I know the steps to create the user statuses and user status profile for notification but I want a brief description on maintaining the user statuses. Can i have any document that can explain me the user statuses.
    Hope to find the reply soon. Thanks in advance.
    Chin2

    Hi Naveen,
    Thanks for such a valuable reply, this document is very much helpful to me. See the below example i am showing for the status profile i have created
    STATUS PROFILE:  ZP-NOTIF
    Status number        Status     description                                          Init      Lowest       Highest      position     priority
             1                    OPEN       Open Notification                                no        1                   1                 1               1
             2                    RUNG      Equip. Running Condition                    no         1                   2                1               1                
             3                    NRUN      Non-Running Condition                       no         1                   2                1               1                
             4                    CLSD      Closed                                                 no         1                   2                1               1                
    When I am trying to set the first status (OPEN) to the notification, it works fine but even after I am assigning the order to this notification, put notification in process, assign equipment I cannot set the next status (i.e., RUNG) it is showing me the following error:
    "Status RUNG is not allowed (QNF 100000000000) "  -> -> 
    Diagnosis
    The user status 'RUNG' has reference number 02.  In the current object status 'QNF 100000000000', the reference number of a status may not be higher than 01.
    Procedure
    You can only set user status whose reference number is not higher than 01.
    please help me solving this question its a bit urgent.
    Thanks once again for your replies.

  • PM Notification - User Statuses

    Hi PM Gurus,
    Is it possible to control the Date/Time field associated with the User statuses of a PM notification. I want to control these values from external inputs.
    Please suggest.
    With regards
    Prady

    Hi All,
    Can we change the description of the field in a PM Notification? E.g. on the Dates tab we have Start/End Dates section and in that we have Required Start. I want to change this to only Start Date.
    Is it possible? If yes then how.
    Thanks in advance.
    With regards
    Prady

  • User status for ERP Quotation items in CRM Web UI

    Hi,
    We have created an assignment block in Opportunity overview screen to show all ERP Quotation created for the opportunity.
    This is a tree view and we are displaying Quotation header and its items details.
    To achieve this, we used ERPOrder BOL object.
    Now, the problem is that we have to show, user status for Quotation header and its items.
    I checked the BOL object.
    To show user status for Quotation header, I think we have following solution.
    ERPAdminH->ERPHeaderUserStSet->ERPUserStatus->field(STATUS_T)
    But, I could not find anything to show user status for quotation items.
    The following relationship shows only system status.
    ERPAdminI->ERPItemStatus->all fields in the underlying structure show the system statuses.
    Could anyone help me to find the way to show user status for items?
    Thanks & Regards,
    Ansal

    Hi,
    Maybe this description will help you:
    [http://weblogs.sdn.sap.com/pub/wlg/23879?utm_source=feedburner&utm_medium=email&utm_campaign=Feed%3A [original link is broken] [original link is broken] [original link is broken] [original link is broken]SAPWeblogsCrm%28SAPWeblogs%3ACRM%29|http://weblogs.sdn.sap.com/pub/wlg/23879?utm_source=feedburner&utm_medium=email&utm_campaign=Feed%3A [original link is broken] [original link is broken] [original link is broken] [original link is broken]SAPWeblogsCrm%28SAPWeblogs%3ACRM%29]
    Kind regards
    Manfred

  • Equipment master : user status

    Hi,
    Where do I get to see USER STATUS of an equipment master.
    Regards
    nandini

    Hi,
    When you open equipment master on the header below description you have status available. There you will find a symbol i in Blue color, when you select this icon it will take you to another screen where on left side you can see System status and right side you can see the User status.
    You can assign the user status profile to the equipment category level. or if any user status profile's are declared for equipment relavent in configuration then you can select the same by going to the screen as mentioned above.
    Hope it's helpful.
    Regards,
    N.Nagaraju

  • USER STATUS at Activity Level

    I do have user status defined for Activity and it doesn't show up when i set the status. All i see is SYSTEM STATUS and not user status. To see user status i need to click the blue button (with I symbol) and then see it. Why is this happening like this?
    But at Network Header level & WBS level i see both USER STATUS & SYSTEM STATUS.
    Any info will be a great help

    Hi,
    I think WBS and Network are controlling objects in SAP. Activty is related to execution. This may be the reason why SAP has provide detailed ie user statuses at WBS and network level only.
    In my opinion you cant achieve this in standard SAP, you may have to for devlopment of customised screen. User exit CNEX0008 will help you.
    Regards

Maybe you are looking for