ChaRM - Developer cannot create transport request
Hi, I have 2 questions.
1 - We have a Request for Change created, after the change got approved, this created the Normal Change document. Is this the way it should work?
2 - After the Approval, the developer logs in to create the transport request. The system and client is disabled ad the short description comes with some weird text. We have a solution created and the solution has the development system within the logical component in it. Please help..
Thanks in advance..
Hi Jim,
There is a context node error in your screen (BTAICTRANSPORTH not bound). Please check the following in your system:
Call transaction 'BSP_WD_CMPWB', enter the UI component name AIC_CM_TRANS_CR and choose display.
Open up the node 'Views'.
Double-click on view AIC_CM_TRANS_CR/TransportReqPage1. You will come to a view detail screen.
On the right hand side open up the node 'View Layout' in the tree and double-click on the htm page TransportReqPage1.htm.
Choose tab 'Page attributes'.
Please check if you see BTTRANSREQ as in the picture below:
regards,
Raquel
Similar Messages
-
Unable to Create Transport request in more then one DEV client (in ChaRM)
Hi,
We are having 2 Landscapes,
DV1 (100) --> QA1(100) --> PR1(100)
DV1 (200)--> QA1(200) --> PR1(100)
Both these landscapes are added in the ChaRM Project landscape. When we have created a correction and created a Workbench request, we were getting the option to choose the DEV system and we chose DV1(200). When we tried to create a TR for Customizing in DV1(100) it did not provide the pop up for DEV systems and directly created the customizing request also in DV1(200). We were unable to even create the TR in DV1 (100) - using the task 'Create Transport request' in the Task plan for the corretcion (It gave an Error that the DV1(200) is the Development system for this change).
is this the standard behaviour? can't we have TRs from different client/ development systems under the same correction?
Please clarify?
Regards,
KathirHi
As i said earlier you will get option to choose system for creating Transport Request only in case of normal corr
but in case of urg corr
you need to give ibase for production of the cocerned landscape
e.g if u have ecc and bi and want to create transport in ecc then giv ibase for prd of ecc only
because you will not get pop up in urg corr
Hop doubt clarified
Regards
prakhar
Edited by: Prakhar Saxena on May 12, 2010 6:17 AM -
CHaRM-Action "Create Transport Request" is cancelled
Hi All,
when i click on the action "Create Transport Request" and save the change document the following error is displayed
"Action Create Transport Request in system SM2 200 of type Source Systems has been cancelled"
where SM2 200 is our Dev Client in the same Solution manager.
i did add the SAP ROLE "SAP_S_RFCACL" to the user in both the client and gave full authorization
but it did not help.
Regards,
Pradeep Lhi Pradeep,
i am doing ChaRM configuration in our Solman system and also new to this.
i need help for "Create Transport Request" from CRM action....
Is it possible to create TP request from CRM action??
if yes please guide me how to do it?
Expecting ur reply...
Regards,
Selvakumar RV -
Create transport request based on SDMI transaction type
Hello,
a customer of mine intends to use transaction type SDMI in a kind of unusual way. He only creates SDMIs without creating projects, cycles or change requests in ChaRM. He uses a customized copy of the normal correction to track his changes and now needs to activate the functionality to create transport requests as an auditor requirement.
As I'm not proficient in ChaRM, I would like to know if that is at all possible.
Assuming it is possible, what would be the preferences to use action "Create Transport Request" regarding IBase etc.?
Assuming it is not possible, what would be necessary as a minimum to establish the link to the respective system in which the transport request should be created to get that action working, a maintenance cycle? How is the maintenance cycle linked to the ticket?
That are a lot of questions, and it would be highly appreciated if somebody could lighten up the fog there for me.
Thank you in advance!
Kind regards,
EmanuelHi,
1) Do I need to perform any steps in the task list before ChaRM can be used?
No once task list is in active state and sdmn is created for ur project u can start using charms
2) How is the maintenance cycle ticket (SDMN) linked to the change requests? Is this linkage done in the SDCR ticket via the maintenance project in the "Customer fields", where solution, maintenance project etc. can be assigned? Or is this implicitly done by the chosen IBase?
Yes everything is dependent on IBASE and logical component.
Check this links
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Check SMP/SDN
https://websmp208.sap-ag.de/changecontrol
Resources on CTS+ [original link is broken]
Hope it solves ur queries
Regards
Prakhar -
Wrong Development class in Transport request
Hi Gurus,
I had to change the Info OBject to meet the business requirement(Enabled Text Master Data). While creating transport request, I enteres wrong development calss in treansport requset. No transport request were released to QA. Now how to fix this issue, I mean How to enter the right Development class for the Info Object?
Thanks in advance.dear Raj,
you can change the development class/package with
rsd1 (for characteristic), rsd2 (keyfigures),
type in your infoobject name, and click button 'object directory entry' in top menu, in next screen click pencil icon ('change/display' F6) and choose/type in the right development class/package and 'save'.
hope this helps. -
Creating transport request for SQVI
Hi ABAP Guru's,
I have created a query using SQVI. How can I create transport request for it because I want to transport that to QA.
Thanks.
Regards,
Tushar.Hi Tushar,
You cannot transport The query made via SQVI is only intended for individual use/reporting purpose.
To transport the query by converting it to SAP Query source of data tobe converted to an Infoset.
SQVI-> SAP QUERY
QUERY(MENU) -> CONVERT QUICKVIEWS
Assign Infoset and Area to the Query and then you can transport.
Hope this may help you.
Regards,
Lanka -
How to create Transport request for OKC9 changes
Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
VijayHI,
In the same screen, go to Menu bar>Table view. Transport.
This will help you to create Transport request and u can move the same to Production.
Vijay -
How to create transport request in object transport
How to create transport request in object transport from server to server
thanks in advance
aryahi,
when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
put mail to basis people to transport ,thy will transport using STMS transaction. -
How to create transport request for standard web template
hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shaliniBusiness Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome -
How to create transport request for standard text created using SO10.
Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna LHi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva -
Creating transport request manually
Hi All,
I have an entry in a table, I want to transport it to other systems (QA).How can I create Transport Request manually and attach table entry to this Transport Request.
Please let me know procedure how to do this.
Thanks in advance
jogHi,
Check this :
Create a workbench transport request in se09 and double click on it, system opens request/task screen , go to objects tab add program id as 'R3TR' object type as 'TABU' object name as table name (ex: ZTABLE) and click on the function button , put '*' in table keys and save the request.
now transport this request , table entries will be transported to respective systems .
Regards
Appana -
BAPI to create transport request.
Hi All,
I want to create Transport request through program . Is there any functionModule/ BAPI for the same?>
Thomas Zloch wrote:
> But whenever possible (like in this case with the transport requests) I avoid BDC because it is very "fragile" especially for more complex transactions (we all know the "field not available" or "invalid screen" type of errors), and you will have to do rework after every upgrade or patch where SAP decided to change the screen flow of the transaction you are calling.
> Cheers
> Thomas
I personally think that("field not available" or "invalid screen") would not be in case od BDC cause,as we all know user does not much do ( I Would say R&D ) in SE10 except just realease the TR
so BDC would be preffer as No authorization check in Above BAPI suggested.
Cheers
Amit. -
SCMA create transport request: Suggested request owner is wrong
Hi,
When we try to create a transport request via SCMA the suggested request owner is not the user executing the create request itself but the user who created the project some time ago. Eventhough this user can be changed this leads to wrongly assigned transport requests.
Since project creation number of users have been added to the project in solar_project_admin but they are not taken into account.
We already did try creating a new task list for the project but that did not work.
Any ideas how to solve this?
thanks
TomHi Tom,
Normally it is done via action Create Transport Request in the SDHF/SDMI document.
There are certain advantages of it.....for e.g..u can create a task if u want to have mulitple changes and can assign multiple developers
Try this it will solve ur problem
Regards
Prakhar -
CREATING TRANSPORT REQUEST TO OBJECT
Hi All,
I created an object in a LOCAL OBJECT. Can I create Transport Request for that iobject. If so how ?
Thanks & regards ,
Mani.Hi Mani,
Please check the thread,
how to assign a request number to the local object
Regards,
Hema.
Reward points if it is useful. -
When i change, create cycle (ksu1),I donot want to create transport request
when i change, create cycle (ksu1)
i donot want to create transport request ?
when i change/create cycle(KSU1,KSU2) i just want to change/create cycle.
i donot want to configure about cycle.
what should i do ?Hi dittaporn
If you want to change whether your customization should create transport request or not you go in Tcode SCC4.Here you select your client for which you want to make changes and select NO CHANGES ALLOWED .After doing this setting, system will not create request pop up box.but i would suggest, you must ask your system administrator ( Basis people) before make any changes.
Hope this helps you and if found useful assign points.
Regards
Nilesh
Maybe you are looking for
-
BOM explosion while creating sales order
hi i created a fert ,verp and halb in the palnt XX created a BOM for fert with level 5 for halb and VERP as stock item for fert in MM01 item category is ERLA and extended with sales org while raising sales order for fert am getting error as HALB and
-
My credit card was charged about $100 for 8 different transactions. Five amounts were $9.90. These dates are Aug 6, 7, 28 and 29. I have not ordered anything and don't know what they are for. Please help me. Linda Feddersen
-
How to add shortcuts to the [File] Open dialog box?
Is it possible to programatically add shortcuts to the dialog box that opens when you press the browse button attached to a file/path control? I'd like to be able to add to the list which includes, My Recent Documents, Desktop, My Documents, My Compu
-
Help... I have no idea what to do!!!!!!!
I need some major help! While working away one day, my laptop just shut off. It had did it before, so I thought nothing of it. I usually would have just turned it back on and finished up. Well this time it did not come back on, the fan just kicked on
-
Unable to use my numbers pad on the right.
How can I correct the problem. Thankks