CHARM error - No Target system for Normal transport generated from another client

Hi Gurus,
This is regarding normal change. We have two clients in development. (Workbench and Customizing)
We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
I attached some screenshots related to this.
Can you please help how to add a target system for another client of development ?
Regards,
Salman

yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

Similar Messages

Error in RSA3 - no target system for the delta update

Hi friends,
I have created one datasource but in RSA3 when i press F4 at target system it gives me msg like "The DataSource V_BW_DPP still has no target system for the delta update" what could be the reason? kindly help me.
Regards
Suyash

Hi Suyash,
First check whether the BW system is connected to R/3 or not by Right click on Source system in RSA1 and selecting the option Check.
Also What is the update mode you have chosen in RSA3?. Is it full ( F ) or Delta (D) . If you have chosen delta then you check in RSA7 whether the data source V_BW_DPP is appearing or not . If it is not appearing in RSA7 do init upload in BW system for the data source and then check in RSA3.
Regards,
Prakash

Error in target system !!!

Hello,
I have the same error in Dev, Quality and production (wich are in different machines) with XI 2.0 To R/3 4.7, we send tRFC to IDOC and all messages are " error in target system" in sm58
in sxmb_moni, for a message, the first flag is OK, the second flag (A. Status) is red.
When we check the RFC Connection in sm59, it's sometimes good, sometimes not, we think it's a network problem (maybe with firewall...)
have someone any idea please ?
Cedric Rousseau

Hi Manish,
If so, can you control the number of idocs sending to XI box. This is workaround
Is this may be because of number of work process . I am not sure here. So you can increase the work process.
But you can seek help from SAP to audit on this provided if you are able to reproduce the error..
This is just my views~
Regards,
moorthy

The DataSource ZGLOBAL_SPND still has no target system for the delta update

Dear Experts,
I have created a Generic Datasource, while checking records in rsa3 iam getting below error.
Error: The DataSource ZGLOBAL_SPND still has no target system for the delta update.
Source system is already created.
For some of the datasources iam getting this msg.
regards
KV

Hi,
Fisrst did u enabled the Delta for Generic.If yes, the in RSA3 select Update Mode as "D" then provide the BI Trget system and execute.
If you correct Target system and update mode D then it should fetch Delta records only...If not please write to SAP about this issue.
Regards
Ram.

MCW_AA111 System not a valid BW target system for analytical applications

Dear Gurus,
Our project would like to use retail allocation strategy with reference to SAP BW, such as
Quotas based on SAP BW data
Top down (SAP BW)
Bottom up (SAP BW)
To retract the data from BW, we go to the configuration of Data Retraction for Retail/CP. (T-CODE: MCW_AA).
In the Maintenance of Queries for Analytical Applications, we wanted to add a new entry in the query list. We can find the Target Sys. But when we tried the input help(F4) of the Analyt. Appl. Query., the msg: "MCW_AA111:System is not a valid BW target system for analytical applications" prompt out.
RFC connection has already been established between SAP-retail and BW.
Does anybody have any clue?
Thank you.
Alex.

hi Kevin,
check if helps following oss note
Note 983449 - Termin A122 1COLUMN no valid characteristic of infoprovider
Symptom
Termination A 122 Brain occurs when you test and generate a query. The system does not recognise the characteristic 1COLUMN.
Other terms
Query, condition, COB_PRO
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.

Internal order - Error - Different logical system for order

Hello all,
I try to send IDoc (INTERNAL_ORDER) from system A to system B.
I have done:
- BD64 / WE20 / WE21
But after having customizing I have got following error:
Different logical system for order xxxxxx
Message no. 2075ALE001
Diagnosis
Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
System Response
Internal order xxxxxxx with master system A cannot be distributed in system B.
Procedure
Check customizing for ALE for internal orders.
How to solve this?
My aim is to maintain internal order master data in test system.
Thanks for your help.
David

I have found something.
If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
Then: how to define "master"?

Error in target system : iDOC -XI-iDOC

We are getting this error in smq2 when we are processing bulk idocs thru XI "Error in target system " . The setting on receiving system is trigger by background program .
Manish

Hi Manish,
If so, can you control the number of idocs sending to XI box. This is workaround
Is this may be because of number of work process . I am not sure here. So you can increase the work process.
But you can seek help from SAP to audit on this provided if you are able to reproduce the error..
This is just my views~
Regards,
moorthy

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

Transporting variants from development client to testing client(ECC6.0)

Can we use the report RSTRANSP for transporting variants(data for testing purposes) for a standard program from development client to testing client?
Thanks & Regards,
Savitha

Hi,
Follow like this.
In SE38, give ur program name.... select the variant radio button & click on diaply button & then press F4 for variant field & choose the variant u want to transport...
Then goto Utilities --> transport request . now execute the report select ur variant name & click on continue button .. now it will ask for the CR number ...assign it to the particular CR number & Release & Import in the Quality Server.
Reward Poitns if it is Useful.
Thanks,
Manjunath MS

Changing Original System and Transport Target System for Objects

Hi Gurus,
I need to do mass transport of all the Infoobjects to newly defined system. Since these objects have different Original system. Its giving me error. Again, for other objects, Transport Target system is QAS, But we want to change it to NBW (A new system to which we want to send transport) . I am able to change package of Infoobjects. Is there mechanism to change Original System and Transport Target for System? Please let me know ASAP.
Regards,
Harpal
Message was edited by:
Harpalsinh Gohil

If you simply edit your original post, it will go to the top of the list. There's no need to post duplicates.
Subjects with a subject of "Urgent" will be filtered out by a lot of responders.
Why not close this thread and bump the other one?
Rob

How to create empty text file on target system for empty source text file

Hi All,
I have an issue in handling empty file in the Text (FCC) to Text (FCC) file scenario. Interface picks text file and delivers on target system as text file. I have used FCC in both sender and receiver CCs.
Interface is working fine if the source file is not empty. If the source text file is empty (zero Bytes), interface has to delivery an empty text file on target system. I have setup empty file handling options correctly on both CCs.
But when I tried with an empty file I am getting the error message 'Parsing an empty source. Root element expected!'.
Could you please suggest me what I need to do to create an empty text file on target system from empty source text file?
Thanks in Advance....
Regards
Sreeni

>
Sreenivasulu Reddy jonnavarapu wrote:
> Hi All,
>
> I have an issue in handling empty file in the Text (FCC) to Text (FCC) file scenario. Interface picks text file and delivers on target system as text file. I have used FCC in both sender and receiver CCs.
> Interface is working fine if the source file is not empty. If the source text file is empty (zero Bytes), interface has to delivery an empty text file on target system. I have setup empty file handling options correctly on both CCs.
>
> But when I tried with an empty file I am getting the error message 'Parsing an empty source. Root element expected!'.
>
> Could you please suggest me what I need to do to create an empty text file on target system from empty source text file?
>
> Thanks in Advance....
>
> Regards
> Sreeni
the problem is that when there is an empty file there is no XML for parsing available. Hence in case you are using a mapping it will fail.
What ideally you should do is to have a module that will check if the file is empty and if so write out an XML as you want with no values in the content/fields.
Or the next choice would be to have a java mapping to handle this requirement. I guess that on an empty file the java mapping will go to an exception which you can handle to write out your logic/processing

Error:No Logical system for FI is maintained.

Hi,
we are working on SRM 4.0 and i got the below error messages while trying to create the shopping cart from catalog in quality system.
1. No Logical system for FI is maintained.inform system admin.
2. Enter company code.
3. Partner00000123458 not found.
we have checked org structure in production and quality system,but there is no problem with production. problem with quality system only. even both systems are having same structure.
can you please advise where we need to check the settings pertaining to logical system in SRM side.
Regards,
SIS

Hi
1.Kindly make ensure that all SPRO settings with quality logical system ( ECC as well as SRM) .
2. check org attribure value logical sytem too

Defining SLD Target Systems for DEV, QAS & PRD

In a 3 tier XI landscape (DEV, QAS, PRD) which of the following two scenarios is best?
1. In the SLD define each DEV Business System with a target of the corresponding QAS Business System and define each QAS Business System with a target of the corresponding PRD Business System.
DEV ---> QAS ---> PRD
This means that we export ID objects from DEV and then import them into QAS. The objects then need to be exported from QAS for import into PRD
2. In the SLD define the DEV Business Systems with 2 target systems relating to corresponding QAS and PRD Business Systems.
DEV --> QAS
DEV --> PRD
This means that the same export from DEV can be used for import to both QAS and PRD.
Currently we have scenario 1 implemented but I am thinking of changing this to scenario 2 which I believe is a better solution as only one export is required and it is guaranteed that the same objects are being imported into QAS and PRD.
Any thoughts or comments?

Hi Mark,
I dont think thats a good thing to go with. When you are exporting, how are you going to control in CMS as to which environment you are going to export?
CMS itslef works on the principle of Develop->QA->PRD. This way, when you are in QA and found some bugs and fix them, you can export them all to QA. Finally you assemble them at QA and finally import them to PRD. This way, all the chaged objects later on would also get imported to PRD automatically.
Also As per my knowledge, in SLD, one target bus sys can have mulitple sources but the converse is not true.
VJ

ECATT: Dynamic target system for pattern REF possible?

Hello
I am using eCATT on a Solution Manager (NetWeaver 700). I have to run the test scripts on several different SAP systems.
Therefore, I would like to know whether it is possible to set the target system within the pattern REF (executes another eCATT test script, either on local or remote system) dynamically?
Definite proof that this is not possible is also welcome.
I am aware that I can replace the REF pattern by a corresponding ABAP...ENDABAP coding, e.g.:
FUN ( BAPI_USER_EXISTENCE_CHECK , BAPI_USER_EXISTENCE_CHECK_1, <target_system> ).
Replace by:
ld_rfcdest = id_rfcdest.
ABAP.
CLEAR: ls_return.
CALL FUNCTION 'BAPI_USER_EXISTENCE_CHECK'
 DESTINATION ld_rfcdest
 EXPORTING
 username = id_username
 IMPORTING
 return = ls_return.
" NOTE: Not necessary to handle RFC exceptions -> done by eCATT framework
ENDABAP.
" evaluate ls_return...
However, I would prefer - if possible - to use the REF pattern.
Regards,
 Uwe

Hello
In case you may need this functionality here is (one possible) solution.
The testscript ZUS_SDN_ECATT_DYNAMIC_TARGET calls testscript ZUS_SDN_LOGICAL_SYSTEM_GET dynamically on different target systems.
Testscript ZUS_SDN_ECATT_DYNAMIC_TARGET:
*ECSC Test Script
*ECTD Test Data Container
*ECSD System Data Container
*ECTC Test Configuration
ls_execute = is_execute.
ABAP.
APPEND ls_execute TO lt_execute.
ENDABAP.
et_execute = lt_execute.
FUN ( ECATT_EXECUTE , ECATT_EXECUTE_1 ).
CHEVAR( &EXCEPTION = ' ' ).
EXIT( &EXCEPTION <> ' ' ).
**FUN ( ECATT_LOG_DISPLAY , ECATT_LOG_DISPLAY_1 ).
The funny part of this script is the FUN pattern where I call function module ECATT_EXECUTE which is used to execute testscripts (or test configurations). As IMPORTING parameter we have a structure START_PROFIL where we can set the SYSTEMDATA (container) and the TARGETSYSTEM.
Hopefully I will find the time to explain this testscript and its possible use and implications in more detail in a blog.
Regards,
Uwe

Error While Transporting Smartforms from 832 client to 834 client

Hi
I released my Smartform and Program...
and i told our basis ppl to Transport the Code from 832 to 834
but while transporting they are Getting this error
Transport Control Program tp ended with error code 0212
Errors:could not access file as supposed.
My question is
Y they r getting this error?
is it link to Abap Program..
bcz they are telling that there is a wrong in my Program...
Bt my Program is working fine in 832 client...
Can any one help me on this?

Smitha,
If you haven't done any changes in the program then there is no need but you are saying you have created error messages.Haven't you tagged the changes related to the smartform as well as the Error messages (ie message class) in the same request?
If you have different requests one for error message and one for Smartform,then see to that both are transported.If smartform is using any of those error messages then you need to move the request which has got error messages first and then only the smartform related requests should be moved otherwise it will give a dump becuase by the time Smartform is moved to 834 the error messages request is not yet moved.Hence sequnece while moving the transport requests is very important.It is always advisable to have all the changes related to a program in one request.
And added to that do check the link given by Gautam too.
K.Kiran.

CHARM error - No Target system for Normal transport generated from another client

Similar Messages

Maybe you are looking for