ChaRM: Error while releasing transport

Hi Team,
I have configured ChaRM in Sol Man (Sol Man 7.0 EHP1, SP24). When i try to release transport thro ChaRM, i am getting below error.
No valid TM target found. Message number:/RTC/TMM00154
Your valuable inputs required
Thanks
Kumar

Hello,
Perhaps you would like to review this [guide|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089860&_SCENARIO=01100035870000000112&_OBJECT=011000358700000657692007E]
Regards,
Paul

Similar Messages

Error while releasing Transport which Contain Bussiness object type

I created the method in ZBUS100106 and released it and generate it ,then in the program I wrote some code,functionality works fine ,Now while moving transport to Quality Syestem it shows up with the error
*ZBUS100106 is inactive* , I released it and generate it one more time but did'nt help
My transport has
    Workflow templates
        90000004
    Program
        ZBUS100106
    Business object types
        ZBUS100106
    Table Contents
        SWOTICE
only problem with the program it shows inactive,I ran Se80 and it shows some Subrutine inactive I activate it by clicking right and select Activate but none of the perform activate .
Helpful answer rewarded by the deserve points

Hello,
Are there any errors when you generate ZBUS100106? Check Goto -> Error List.
regards
Rick Bakker
Hanabi Technology

Error while releasing Transport request number

Hi Friends,
Whenever i release the Transport request from SE01 i am getting the following error. Please view the attached image . Could you please explain about that error ? and how can i prevent it in future ?

At starting it shows warning like " Your object contains error continue or cancel " but if i proceed with continue after completion of the releasing process it shows (0) successfully completed but not with an error message. As Krishna Chaitanya said i might have used any dependent object. by reading all of your answer i could understand that this is not sever problem. But i would like to understand this process very clearly . All i want to know is
how to release the request without any inconsistencies?
and which is the best way, ?
is there any requisition before i initiate releasing ?

Error while releasing transport request - Special character "_" in generic

Hi all,
we're receiving the error Special character "_" in generic key when releasing a best practice transport.
Note 1304725 describes my error, but the solution cannot be implemented. The reason for this is that we do not have an individual entry for eacht yb_PS,..,
but we have only one entry where field BWERT has a wildcard '*' as entry.
Does anyone has some idea how to solve this ?
kind regards !

Hello Bjorn,
How did you get this solved?
I'm having nearly the same issue:
A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
60, there's no message rejecting the entry.
Regards

Error while releasing transport request

Hi,
When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
Thanks in advance.
Arvind...

Hi,
This is more related to the BASIS side,
still have found one solution in one of the thread. Still contact you BASIS administrator for it.
Solution.
Is the error pointing at TP or R3trans?
In this phase, we get error coz of r3trans.
Please try following the note 206168. which tells you to change the r3trans.
If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
Jayant Sahu

Got syntax error while releasing transport

Hi all,
we have a requirement that we need to create customer exit variable.
i created method ZBW_ZCM_WEEK12 for the class ZBW_XRSR and collected under the TR.
when i try to release the TR,Its giving an error that
Class ZBW_XRSR Method ZBW_ZC_CURPLUS03 Row 18 Column 6
Large table /BIC/AZSD_D1600: No first field of a table index
in WHERE condition
its showing some other method with error ...
can we tranport only method ZBW_ZCM_WEEK12 without a class inculded ??

Hello,
Are there any errors when you generate ZBUS100106? Check Goto -> Error List.
regards
Rick Bakker
Hanabi Technology

Error in releasing transport in XI using CTS+

I am getting the following error while releasing a transport in XI 7.0 system. Here is the error log
Full Message Text
Error occurred during hmi call: CMS -> XI; method = writeChangelistData
Thrown:
MESSAGE ID: com.sap.aii.ib.core.transport.api.rb_TransportCsException.UNSUPPORTED_RELEASE_PREFIX
com.sap.aii.ib.core.transport.api.TransportCsException: Unknown import source prefix XI7_1_XI_CONTENT.tpt99badd10521711dfa213001b78df49b6.tmp
at com.sap.aii.ib.server.transport.impl.utils.FileUtils.getSerializationReleaseId(FileUtils.java:499)
at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:715)
at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:291)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:212)
at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:507)
at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:655)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Serialized server exceptions:
Any help would be appriciable. We already have a message open with SAP and checked various notes and threads to correct the issue but no luck
Thanks,
Pankaj

Hello Bjorn,
How did you get this solved?
I'm having nearly the same issue:
A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
60, there's no message rejecting the entry.
Regards

Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali Papana

Did you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

Error while releasing an activity from NWDS

Hi,
I am facing the below error while releasing an activity from NWDS - transport view.
Internal error: the export of SC_CR com.xxx.xxx/xxx_SOFTWARE_COMPONENT#Track_D.118 failed. tcs returncode was 12
Check in and activate was successfull and in CMS, the activity is shown as activated.
Please help me to rectify this error.
Thanks in advance!
Regards,
Manchari. N

Make sure you are connected to NWDI server.
Also create a new activity for a different component in the same track.
Below links may be helpful :
http://wiki.sdn.sap.com/wiki/display/TechTSG/(NWDI)(CMS)PropagationRequestReleaseinTransportViewFails
NWDI/CBS - release activity in consolidation
Re: Error on Release of activity (Version set not found!)
Regards
Deepak

Error while exporting transport requests

Dears,
In our PI 7.1 server,configured with CTS +,We are getting below error while exporting transport requests:
Caused by: com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details): EPS_OPEN_OUTPUT_FILE, (service=com.sap.tms)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:98)
at com.sap.tc.di.draft.cts.impl.adapters.jco.AbapEpsOutputStream.open(AbapEpsOutputStream.java:83)
... 40 more
Caused by: com.sap.conn.jco.AbapException: (126) OPEN_FAILED: OPEN_FAILED
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.execute(MiddlewareJavaRfc.java:1492)
at com.sap.conn.jco.rt.ClientConnection.execute(ClientConnection.java:1065)
at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:987)
at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:977)
at com.sap.conn.jco.rt.AbapFunction.execute(AbapFunction.java:300)
at com.sap.tc.di.draft.cts.impl.adapters.jco.JCoAdapter.executeFunction(JCoAdapter.java:103)
at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:78)
In SE01 it show tp 12 while releasing request.
Please suggest.
Shivam
Edited by: Shivam Mittal on Mar 16, 2010 1:04 PM

File Permission Issue.

Error while releasing a request.

Hi All,
I'm facing an error while releasing a request.
The request contains an ABAP programs along with two INCLUDDE programs as well as a TCode to run the same.
It is running successfully in dev. server. But, while releasing ths request it shows me the following error :
" Object REPT ZBAPI_SD_SERV_SALES_ORDER is inactive " ,
where ZBAPI_SD_SERV_SALES_ORDER is the program name. When I checked out in ABAP editor it shows the program active.
But, I'm unable to understand why its showing me an inactivation error.
Guys, help me out in this.

Hi,
Check if the INCLUDE program are also ACTIVE. They must be in inactive state. Try activating them and release the request.
Regards,
Vikranth

Vf02 error while releasing a billing doc to accounting

Hello All,
I m getting the below mentioned error while releasing a billing doc for a accouting.
I have checked all the settings in vkoa , ob52 and many more and all are set properly, now m not able to track where actually the prob is.
error is: No account is specified in item 0000001004
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000001004" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000001004" of the FI/CO document.
Points wil be rewarded
Thanks,
SUnny

Hi,
Have you checked what is the determination account determination log ? You can do this by entering in VF02 and select from the menu Environment -> Account Determination Analisys -> Revenue Accounts.
In this log you can see what are posting keys determined from the pricing procedure that should be posted in the FI document and determine very easy in which step the account was not determined.
After that you can maintain the correct account in VKOA transaction.
BR,
Valentin

Error while releasing Billing doc to Accounting

Hi all
I am gettin the following error while releasing a Billing doc to FI-
Reconciliation account 240001 or short key 00 is not permitted
The Billing doc pertains to Export sales and the billing Doc type is Export Invoice. However the Customer Recon A/c is defined as 240000 which is for Domestic Sales. A/c 240001 stands for Export Sales. I am wondering why it is asking for the Export Sales Recon a/c. Does this has something to do with Alternative Recon A/c? Should I set an Alternative Recon A/c and check this? If yes, then should it be defined in SD or FI?
If any1 has come across this prob, plzz help me.
Regards

It is all Fi related, and should be defined by the Fi Consultant.
But by changing the sort key I think your error can be solved. But I don't exactly know your config settings to recommend any solution.
Regards
AK
Please reward if helpful

Error while uploading Transport request

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
Deepak

Hi,
Check the versions of the two sap systems you are downloading and uploading the transport requests

Error while releasing credit block for the order

Hi all,
I am getting follwing error while releasing credit block for the order in VKM1
Incorrect index structure for table IVBEP1
Text
Incorrect index structure for table IVBEP1
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your SAP R/3 System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error.
But we are not transfering any orders to CRM.The order can be only seen in R/3
Please assist
Regards
Mano

Hi
KIndly check the oss note 505876 in may help you
Regards
Damu

ChaRM: Error while releasing transport

Similar Messages

Maybe you are looking for