ChaRM for Dual Stack ABAP & JAVA - No http port for system SPD

Hi,
I have configured the CHARM for Dual stack ( Java, ABAP). when I perform the action 'Logon to System' it gives me following option
" The system is a dual stack system. You can log
on to the ABAP stack or non-ABAP stack
To which stack do you want to log on?
ABAP or Non ABAP"
If I click on Non ABAP, one more message comes
"You can logon to system SPD or just display its
transport requests
What do you want to run?
Requests Or Logon"
If I click on Logon I get the Information " No http port for system SPD "
& If I click Continue It will take me to Ugent Correction & error appears as 'Action System Logon in system SPD 100 of type Source Systems has been cancelled'
How to Solve this error.
Regards
PK
Edited by: PK on Sep 1, 2010 5:59 AM

Its possible to login to portals(non-ABAP systems).
Please check.
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Initial+Configuration
Pl. make sure SLD for the Java stacks are defined correctly.
regards,
Arun.

Similar Messages

NW2004s: SPS installation for dual-Stack-Installation (Java/ABAP) - PI(XI)

Hello,
we want to apply a new SP stack to a NW2004s (ECC 6.0) - dual stack (Java/ABAP) with PI(XI).
The ABAP stack is sucessfully patched yet,
but the Java stack needs still to be patched!
In the SPS guide for SPS 9 and some OSS notes you can read that during the patching of the Java stack, the whole system (ABAP and Java engine) are restarted several times. But the JSPM should ask you before the restart.
Do you have experiences how long the patching of the Java stack will take (downtime)?
How often needs the system to be restarted?
Is it possible to work with the ABAP engine (ABAP development, etc.) during the installation of the Java SPS with JSPM until the system needs to be restarted?
How is it possible to minimize the downtime of the system during the Java SPS installation?
Thanks in advance!
Best regards,
Stephan

Hi Stephan,
"Do you have experiences how long the patching of the Java stack will take (downtime)?"
I believe this is most highly dependent on the hardware. Although some patches will deploy more objects than others, the deploy time is shorter on better/faster hardware. I applied SP9 on my laptop PC (java only, no ABAP stack) and it took a few hours total -- including my processing and error correcting time. My laptop has only 2 GB RAM so this process was greatly slowed by the amount of available memory (I was running other applications, like Outlook, etc.) resulting in a lot of disk swapping.
"How often needs the system to be restarted?"
Again, I have a java only installation, no ABAP, but I believe there was only 1-2 system restarts. The system had to be restarted after the application of the java kernel part of the patch, then shutdown and restarted again for the offline deployment phase. I cannot remember if there was a restart after the online deployment phase.
"Is it possible to work with the ABAP engine (ABAP development, etc.) during the installation of the Java SPS with JSPM until the system needs to be restarted?"
Yes.
"How is it possible to minimize the downtime of the system during the Java SPS installation?"
I think the best way is to have the best hardware! Also, be sure to be thoroughly prepared by reading the guide, all of the Notes, etc. I was slowed by a previously correctable error (my administrator password had been previously changed and I had not changed it in the secure store -- Note 701654).
Best Regards,
Matt

Patching dual stacks ABAP + JAVA simultaneously

Hi,
I would like to know if I can patch ABAP and JAVA on a dual stack system at the same time. According to the patching document I can run an SGEN when the JSPM is running but it does not tell me why I can not patch a dual stack system simultaneously. I have discovered that the JSPM restarts the dispatcher in order to update itself. After this initial step the ABAP stack should remain available providing the kernel has been manually updated.
Does anyone have any advice on this?
Thanks,
James

Hi,
I had a similar case where I had to install a java stack for an already existing CRM system running on Windows/SQL Server.
I installed a different SID for Java on the same host and I installed the Java database as a second database in the same SQL server engine.
Therefore I shared the hardware resources but still had 2 separate stacks as best practice.
Regards,
Olivier

Is it possible to Install Net weaver 7.3 as Dual Stack (ABAP +JAVA+EP+BI)

Hi All,
I am trying to install the NW 7.3 as Abap+Java stack, But I could not find any option to install as dual stack.
If any one Know the solution, please inform to me.
Thank you very much in Advance.
Regards,
Amar.

> But you can install PI, and then deploy all the other SCAs with JSPM.
...and on the first upgrade/EHP installation the system will be hosed because the tools don't support dual stacks.
Markus

Any advice / guide on how to create separate Stack ABAP + JAVA for CTS+

Hello Experts,
Can you please point me to the how to guide for creation of separate Stacks ABAP + JAVA for CTS+ Transport Management.
Also can you please clarify how I can convert STMS Virtual systems in to Real systems? Any guidance for this?
Thank you

Hello,
You should have a look at the installation guide.
http://service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release XXX
For instance :
http://service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 7.0 EHP 1
Then have a look at section 4.2 Installation Checklist u2014 Java Add-In
It covers:
Java Add-In for an existing central ABAP system
Java Add-In for an existing distributed ABAP system
Java Add-In for an existing High-Availability ABAP system
ABAP+Java Dialog instance
Regards,
Paul

Whats the difference between ABAP stack, ABAP+Java stack and Java stack

Hello,
I have a nagging doubt about the difference between the ABAP stack, ABAP+Java stack & the Java only stack. I believe that the method of applying the kernel for all the 3 types is different.
Also can we apply the ABAP support packs through JSPM.
Please put some light on this.
Thank you

Hi Zaheer
ABAP Stack
AS ABAP is used to provide the ABAP foundation of SAP NetWeaver.
Part of AS ABAP is the Search Engine Service (SES), which enables users to search for
business objects using Search and Classification (TREX). SES accesses Search and
Classification (TREX) functions through the Search and Classification (TREX) ABAP
client. SES replicates the business objects from the ABAP application to Search and
Classification (TREX), so that it can apply Search and Classification (TREX) search
functions to them. When a user enters a search query, the Search and Classification
(TREX) system responds to it, not the database for the ABAP application. For more
information, see the document Installation Guide SAP NetWeaver TREX Single Hosts /
Multiple Host.
Java stack
AS Java is used to provide the Java foundation of SAP NetWeaver. Among the key
capabilities of AS Java are:
J2EE Engine a J2EE 1.3-compliant application server for running enterprise
applications. In addition to the pure J2EE standard technologies, the J2EE
Engine implements complementary technologies, such as Web Dynpro or Web
Services, that are targeted at supporting large-scale, real-business application
development projects.
SAP Composite Application Framework Core (CAF Core) is a service-oriented
architecture for building and deploying composite applications. It enables
modeling of different service types entity services that represent a domain
model, application services that implement business logic, and external
services that offer connectivity to back-end services by means of remote
function calls (RFCs) or Web services. Usage type AS Java comprises the CAF
Core runtime environment, while design time tools are part of the SAP
NetWeaver Developer Studio.
Web Dynpro is the user interface technology for developing professional
business applications for mobile as well as for desktop clients. Web Dynpro
applications can easily be integrated into SAP NetWeaver Enterprise Portal,
providing a unified layout for the end user as well as enhanced navigation
support. Web Dynpro also allows, for example, the development of interactive
forms using the Adobe document services.
Adobe document services is a set of runtime services that provide a range of
form and document creation and manipulation functions such as:
Converting XML form templates (created using Adobe LiveCycle Designer)
to PDF and various print formats
Setting Adobe Reader rights to enable users to fill in and annotate forms,
save and print them locally, and include digital signatures for authentication
using the free Adobe Reader software
Extracting data from SAP applications into Interactive Forms and transferring form data
back into SAP applications using XML
ABAP + Java Stack
Contains both functionalities.
I hope this helps
Regards
Chen

Restart the Java-Engine in a dual stack installation (java+abap)

Hi,
how is it possible to restart or start only the j2ee-engine in a dual stack installation. We have a JAVA- and a ABAP-Stack and want only restart the JAVA-Stack. In windows i can use the MMC of SAP but how is it possible in UNIX.
regards,
sharam

Hi Eric,
i konw this TR, it doesn't work. There are two possibilities:
restart j2ee-local
restart j2ee-global
we try it with j2ee-local because we use a dual stack installation. What could be the problem. Is there an other possibility? How can i restart the j2ee-engine directly on my unix machine?
regards,
sharam

Problems in Dialog instance installation for ECC6.0(ABAP+JAVA)

Does anyone can help me what should be a procedure of installing Dialog instance for ECC 6.0 with both ABAP + Java Stacks.
When installing app server do we also choose ABAP and Java or just ABAP. Installation manual does not cover this and when we run the sapinst we have following problem:
The following are the activities that I have done as pre-reqs on the standby on the server that is to host dialog instance
I have mounted the following file systems on ddrsap02. Created the local filesystem /usr/sap/DSP/D00 and NFS mounted the others
/dev/appsaph 5505024 5503856 1% 5 1% /usr/sap/DSP/D00 (is this required or SAPINST should create it itself)
ddrsap00:/stage 419430400 149761708 65% 90835 1% /stage
dprsap01:/sapmnt/DSP 4718592 2888416 39% 12790 2% /sapmnt/DSP
ddrsap12:/usr/sap/trans 2752512 1084932 61% 5107 3% /usr/sap/trans
Then when I run the sapinst from ddrsap02 to install the DI I get the following error
ddrsap02[/tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI]#vi sapinst_dev.log
"sapinst_dev.log" 20516 lines, 641048 characters
TRACE
Running with toplevel file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/toplevel.xml
Running with dialog file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/dialog.xml
Running with keydb file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/keydb.xml
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaejs701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iacdlib701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaccdlib.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iapasswdman701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
This is SAPinst, version 701, make variant 700_REL, build 817256
compiled on Mar 14 2006, 23:39:26
TRACE [syxxsyshlp.cpp:175]
 syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.397528.1170221882/sapinstexe
SAPINST_EXE_DIR = /tmp/sapinst_exe.397528.1170221882
LANG = en_US
LOGIN = root
PATH = /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
SAPINST_EXEDIR_CD = /stage/51031797/IM_AIX_PPC64/.
LC__FASTMSG = true
WINDOWID = 8388621
"sapinst_dev.log" 20516 lines, 641048 characters
 EJS_Installer::writeTraceToLogBook()
2007-01-31 09:42:48.898 NWDB.getDBHost() done: undefined
ERROR 2007-01-31 09:42:48 [iaxxinscbk.cpp:271]
 abortInstallation
CJS-00030 Assertion failed: in getSidFromProfiles: Variable dbHost should be defined
TRACE [iaxxejsbas.hpp:388]
 handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2007-01-31 09:42:48
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-01-31 09:42:48
FCO-00011 The step assertDBInfo with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|assertDBInfo was executed with status ERROR .
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > High-Availability System > Base
d on AS ABAP and AS Java > Dialog Instance. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button
to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to /tmp/sapinst_instdir/ERP/SYST
EM/ORA/HA/ABAPJAVA/DI.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
Am I missing some pre-reqs or variable definitions?
I was going through the documentation and it says that /sapmnt/DSP/exe should be a local filesystem for a DI on a separate server. Will this create a problem ?
Also they talk about starting sapinst with the variable SAPINST_USE_HOSTNAME set to ddrsap02. I have tried this also
We are also not 100% sure about the settings for parameters:
rdisp/mssserv
rdisp/mssserv_internal
Accorss Devault Instance and Services Instance profile.
When we define it as per installation GUIDE (Abap+Java page 64) we get the popup message in SAPINST:
<html>Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.You have to set the parameter in the default profile and restart the instance.For further information refer to SAP Note 821875.</html>
Other errors follow shortly.
Any help would be appreciated

Hi ,
are you able to resolve this error :Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.
You have to set the parameter in the default profile and restart the instance.
For further information refer to SAP Note 821875.</html>
? if yes , pls let me know , I am stuck with same issue while installing dialog instance .
Thanks
Hamendra

Change http port for Adobe Connect Pro?

I'm running Adobe Connect Pro 7.5 and would like to change the HTTP port Adobe Connect Pro uses. I've changed this from 80 to 90 in the Adobe Connect Pro console and saved. Then restarted my Adobe Connect Pro application. When I go to the URL http:\\<servername>:90 I get a "Connot Connect to Webpage" error. If I change it back to 80 the URL http:\\<servername>:80 works.
Does anyone know how I can change the port for Adobe Connect Pro 7.5? Is there another step I need to do on my Windows 2003 server?

I've had to "cache" uploaded videos by playing them shortly before the audience will see them. For me, the cache holding time when using Adobe's servers is about 5 minutes.

Mobile sales online installation for CRM5.0(ABAP+JAVA)

Hi ,
Client wanted to implement Mobile sales online for NW2004s component CRM5.0(ABAPJAVA) stack. We have already installed CRM5.0 with ABAPJAVA engine and EP7.0.Currently we are using EP with CRM5 using PCUIscreens. Also configured SSO(SAP logon ticket) between EP and CRM and BI7.0.
I found the document which says about NW04 instance CRM ABAP stack and need to install JAVA satck seperately then do SSO and deploy .sca files etc...but could not find for MSON on NW2004s using EP.
We have already integrated CRM5,BI7 with EP7.0 using SSO saplogon ticket,now my concern is
1. Do i need to use MSON configuration like SSO,SLD,deployment on existing CRM5.0 ABAP and Java engine , which is installed in one system ?
or
2. Can i use MSON config through CRM5.0 already integrated with EP7.0 ? which is already configured SSO and SLD etc..
Which method is recomended for Blackberry to communicate CRM5.0 system?
Any sugessions would be appriciated.
Thanks,
Shaik

any help will be appriciated.

Steps for upgrading kernel (ABAP+JAVA)

Hi All,
Could you pls let me know the steps required for upgrading kernel (ABAPJAVA). For ABAP I know the steps but I am confused about (ABAPJAVA) Instance.Recently we faced issues regarding startup of java server after upgrading ABAP stack .
Regards,
Prashant

This question has been asked gazillion of times.... did you do a search before posting?.... obviously not.
Use the Search in the top-right side of the page. You'll be amazed with the amount of info available.
Regards
Juan

Theming Options for Web Dynpro ABAP/Java - Custom CSS

What options are available for creating a custom CSS for WDA? My project is going towards SAPUI5, and they want to apply the same look and feeavl to their Web Dynpro applications.
I know the Theme Designer is an option - but this customer is running on NW 7.3. Obviously to get the WD CSS to look similar UI5, it will require changing all of the WD selectors.
Finally, we have a 7.4 Sandbox. If I build the theme there, is it backwards compatible to their 7.3 landscape?

UI Theme Designer is the only supported way and it is available for NW 7.3 as well, assuming you are up to date on Support Packages. As long as you create a theme with UI Theme Designer the theme will work in any system that supports the same, there might be small functional and visual differences though depending on the SP levels of the source and target systems. SAP recommendation is to always use the latest version available to create (and consume) themes. You could start by using the Cloud version of UI Theme Designer, export and import into your own system. That said your NW 7.3 system needs to support UI Theme Designer to be able to use custom themes created by it.

Solman 7.1 Managed system config for Dual stack

Hi All,
While running the step "WEB Services logical port creation" we are receiving a warning.
Message: Activity disabled : creation of communication user SM_COLL_XXX has not been flagged as being successful.
Details: Activity disabled : creation of communication user SM_COLL_XXX has not been flagged as being successful.
Please make sure the 'User and Roles' activity is executed successfully before executing this activity
When i check in "Create users" step. SM_COLL_XXX is Green led. I did not created this user from solman. I provided existing user. So whats the issue here..?
Please assist.
Thanks,
Rohan

I have the same problem as in the title.
create user log:
User SM_COLL_SMM registered
E:CL_DIAGSTP_MESSAGE:483 solman_admin
note 1659367 can implement
There are ways to solve the problem?

HTTP 500 Error while using XML HTTP Port for idoc

Hi,
I am trying to send CRM idocs via XML Http instead of usual t-rfc.
After standard idoc - pi configs i get the below error.
transferring the IDoc by HTTP, the return code with the message '500Error during parsing of SOAP header' has occurred.
In BD87 I get the below error.
The target address was: http://yyyyyy.XXX.local:800X/sap/xi/engine?type=entry
I get the http 500 error as:-
Check whether the IDoc can be sent again.
It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards
Any idea on how to trouble shoot or resolve this.
Regards,
Anirban

Hi Anirban,
Follow the below links for troubleshooting.
Troubleshooting File-to-IDOC Scenario in XI.
The specified item was not found.
Regards,
Leela

HTTPS Port for SOAP Adapter PI 7.1 (XI)

Hello Colleagues,
we plan to configure an Sender SOAP Adapter (without SOAP envelope) as HTTPS message receiver with HTTP Security Level "HTTPS with Client Authentication".
Does anyone know if this works and which port will be used. For my understanding it must be 443.
If not, it's possible to change the port to 443?
Regards,
Jochen

Hi Prateek,
many thanks!
Where can i do the port change?
Many thanks in advance!
Regards,
Jochen

ChaRM for Dual Stack ABAP & JAVA - No http port for system SPD

Similar Messages

Maybe you are looking for