ChaRM for Rollout
Hi All,
We are in process of implementing ChaRM. Currently we have a 5 system landscape for Rollout and ongoing production. Also currently we have multiple Rollouts going on and we are using SolMan for all config and other activities.
The current trasnport movement path is Rollout dev --> Rollout QA --> Support dev --> support QA --> Production.
How can I replicate this transport movement through ChaRM. Also many rollout will be in progress when ChaRM will go live, how to enable ChaRM in between the implementation project.
Also in current Rollout and Support environment we have multiple client in development i.e. for configuration and development separately.
Regards,
Smita
Hi Kumar,
Basically the main feature / funtionality of CHaRM is for Approval Process like creation of any change (like config or workbench) and then movement of transports from one system to another system. Dev --> QAS -->PROD.
these all depends up on the requirement you work.As per my understanding for your rollout project you are doing all the ECC configuration using the Solution Manager.
They are two ways of movement of trasports:
1.Moving the Transport Requests from one system to another system out side solution manager.
2.Moving the Transport Requests from one system to other system with in the solution manager.
If you are following the 2.option, In this case you have to do the following:
1.Create a Maintenance Project
2.Create a Maintenance Cycle
before doing this activity, the Basis people has to set the TMS which plays a vital role.
Please check the rest with your Basis People.
Regards,
Sateesh.Kandula
Similar Messages
-
ChaRM for a 5 system landscape
Hi all,
we got a requirement to implement charm for 5 system landscape. but the problem is
currently the scenario followed for the rollout is
1. AA(DEV-proj)--> BB(QUA - proj)
Then the TR is forwarded from BB system to the maintenance landscape
DEV>QUA> PROD
they don't want to implement retrofit functionality.
is there any way we can mapp this scenario to charm.
kindly advice in this regard.
Thanks,
Subhashini.Hi Ragu,
Thanks for the reply.
currently a two systems are separated from the maintenance landscape.
they are forwarding the TRs to the development system.
is there any way we create 2 tracks.
1. AA-BB-DEV-QUA-PROD
2. DEV-QUA- PROD
again i not having a clear idea on how to differentiate the tracks as both leads to the same production system.
or is there any way develop a custom method for forwarding this TR to the DEV system.
kindly sugggest on how to go about.
Thanks ,
Subhashini. -
Error when creating transport request in Charm for Portal
Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
DavidHello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark -
Using SolMAn / ChaRm for upgrade to ECC6
Good Day;
We are planning on using SolMan / ChaRm for our upgrade from 4.6C to ECC6 and I am wondering if it would be possible to do the following
Upgrade a development system to ECC6.
Define 2 virtual ECC6 Systems, 1 for the QA system and 1 for the production system
Create a project that contains all the business processes and has the above landscape assigned. This project does not have ChaRM active.
Create a maintenance cycle with the above landscape attached and ChaRM active.
As we upgrade the real QA and production systems to ECC6, we want to u201Cflip outu201D the virtual systems for the u201Crealu201D ECC6 systems.
Does anyone have any input in this type of plan?
Regards
DonGood Day;
We are planning on using SolMan / ChaRm for our upgrade from 4.6C to ECC6 and I am wondering if it would be possible to do the following
Upgrade a development system to ECC6.
Define 2 virtual ECC6 Systems, 1 for the QA system and 1 for the production system
Create a project that contains all the business processes and has the above landscape assigned. This project does not have ChaRM active.
Create a maintenance cycle with the above landscape attached and ChaRM active.
As we upgrade the real QA and production systems to ECC6, we want to u201Cflip outu201D the virtual systems for the u201Crealu201D ECC6 systems.
Does anyone have any input in this type of plan?
Regards
Don -
ChaRM for SAP BI systems?
Hi!
We would like to implement ChaRM functionality for our SAP system landscape.
Among others we have 3 SAP BI systems.
Does some one experience with set up of ChaRM for SAP BI systems?
Do we have here a different approach as for other systems (e.g. SAP ERP 2005)?
Thank you very much!
regards
ThomHi Thom,
we are using a ECC landscape, a BI landscape, a Solution Manager landscape, and a CRM landscape within CHaRM. All landscapes are separate transport landscapes, and there is a transport domain link from SolMan Production system (as this is the transport domain controller).
To answer your question: The approach is all the same for any landscape (as long as they are just ABAP systems). The approach is different for Dual-Stack of Java systems, you would need CTS+.
Best Regards,
Holger -
Hi!
We would like to implement ChaRM functionality for our SAP system landscape.
Among others we have 3 SAP BW systems.
Does some one experience with set up of ChaRM for SAP BW systems?
Do we have here an other approach as for other systems (e.g. SAP ERP 2005)?
Thank you very much!
regards
ThomThom
I have configured CHARM on BW 3OB & BI 7 landscapes, and i dont think whatever you heard is correct.
If you follow pre-requisites you will able to configure it without any errors.
Thank you
Sharmishtha -
Hi
I need to setup ChaRM for a 2 tier landscape. I know how to do the technical side however i need some clarity in regards to the process flow that will be used. Does someone have a diagram or document detailing this process. Basically i just need to know at what point testing happens and when does the transport get triggered to move from DEV to PRDHi
Standard charms is for 3 tier so no diagram
for testing it happens in dev only so in short when move the changes to qa it will remain in dev system for ur case
only when request is released ................it goes to prd
regards
Prakhar -
Clarification in charm for daily transports
Dear Charm Experts,
We have configured charm in our test system and have few calrifications. Please help.
Objective: to use charm for transport management of regular corrections for support and maintenance of system (no implementation or upgrade)
So now we have configured and testing the workflow. Part of it i am successful able to create change request from dswp, approve and set to in development and also able to create transport request from change request.
Now i am unable to release the transport request, getting the following error.
"Action 'Regular Correction: Release Transport Request' cannot be
executed during phase 'Development without Release'"
My understanding is i can not release the request as the maintenance cycle status is in development. So to release the tr of change request i need to also set the status of maintenance cycle.
If this is the case then do i need to create a maintenance cycle for each change we need in our landscape? or how i can create and implement the chages using charm just like Remedy. Hope you understood my concern, please let me know if you need more information.
Thank youHi,
I guess, if i correctly understtand your prb, you are stcuk in flow of NCR.
if the MC is in status "Deve w/o release" your change doc "In developemnet", at this time you can only create the TR and do the develpment activity.
at once you set the MC as "Develp wit release" and your cr in "In development", you can release ur TR task,if you trigger action test transport, Then ToC s created, and import into test system, you can go for all testing, if any correction needed, do that in again in Dev system,release te new task , triger action again test import,ToC created, test it in test system.
Once development done, trigger the action Release Transport Order, nw change doc "Complete developement".
later you can move MC phase "test", CR as "To be tested", in this case corrections reparied by using test messages for create tr and import it.
So please set the phase of your MC as Develp wit release and proceed.
Thanks,
Jansi -
ChaRM for Dual Stack ABAP & JAVA - No http port for system SPD
Hi,
I have configured the CHARM for Dual stack ( Java, ABAP). when I perform the action 'Logon to System' it gives me following option
" The system is a dual stack system. You can log
on to the ABAP stack or non-ABAP stack
To which stack do you want to log on?
ABAP or Non ABAP"
If I click on Non ABAP, one more message comes
"You can logon to system SPD or just display its
transport requests
What do you want to run?
Requests Or Logon"
If I click on Logon I get the Information " No http port for system SPD "
& If I click Continue It will take me to Ugent Correction & error appears as 'Action System Logon in system SPD 100 of type Source Systems has been cancelled'
How to Solve this error.
Regards
PK
Edited by: PK on Sep 1, 2010 5:59 AMIts possible to login to portals(non-ABAP systems).
Please check.
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Initial+Configuration
Pl. make sure SLD for the Java stacks are defined correctly.
regards,
Arun. -
CHARM for SAP Bank Analyzer system
Does anyone have experience with setting up CHARM for SAP BA system ?
Does work ?
Generally I would think it should as BA is technically just an ABAP-type system.
But I have never seen it before connected to CHARM, so any information is much appreciated: PROs, CONs, issues etc.
Thank you
ElenaThom
I have configured CHARM on BW 3OB & BI 7 landscapes, and i dont think whatever you heard is correct.
If you follow pre-requisites you will able to configure it without any errors.
Thank you
Sharmishtha -
What is the process for rollout projects and upgradation projects
Hi All,
Hope you all are doing well.
I am a new bee in oracle apps. Just would like to understand what is the process for rollout projects and upgradation projects and difference between them.
Please help me. Thanks in advance.
Regards,
MMDon't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
Where Technology Meets Talent -
Inventory management configuration for Rollout project.
Hi all,
We have created new plant using Copy function (using reference Plant).
Kindly let me know
what are other configuration required for Inventory management in new plant?
Please provide if any check list available for Roll-out project.
Thanks
SAP-PQHi
1) If your plant is excise then you have to create excise group for that plant and G/L setting for that excise group
2) You have to extend your material in new plant
3) check your material type update for quantity and value update for your new plant in t-code OMS2
and check following link
[Rollout project;
Regards
Kailas Ugale -
Roles for Testing ChaRMs for Non-Abap Systems
Hi,
Can you please suggest what all authorizations are required for Testing the ChaRM functionality for non-abap systems
Thanks in advance
Regards,
Reddihi
check the link
Check the Configuration guide for the prerequisites. -
SolMan ChaRM for NW BPC 10 and BOBJ?
I am looking to find whether BOBJ and NW BPC 10 can be integrated into SolMan ChaRM. Do you have any experience/documentation?
Thank you!Hi loanna
have u checked these documents
http://scn.sap.com/docs/DOC-28446
http://scn.sap.com/people/robin.haettich/blog/2011/08/19/sap-change-and-transport-system-for-sap-business-planning-and-consolidation-version-for-microsoft-platform
http://scn.sap.com/people/dolores.correa/blog/2009/06/05/cts-configuration-in-solution-manager-70-ehp1
http://scn.sap.com/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
My Blogs
http://scn.sap.com/docs/DOC-44166
http://scn.sap.com/docs/DOC-46528
once you have configured your Change and Transport System which is a base for ChaRM you can configure it further with project creation and activation with logical components
let me know if u have more queries
regards
Prakhar -
Hi All
We are doing Global rollout, already 1st phase is live and 2nd in testing phase, 3rd is in realization phase.
Now the ask is to use BC set functionality so that in future we can find out where the system was at end of each rollout in terms of configuration.
1> We have separate development box for Release 1 so I can create BC set and copy all config for Release 1 and import to SolMan for future reference.How to achieve this?
2> Also for Release 2 and Relase 3 we have same development box. How to capture the config of Release 2 and Release 3 separately in different BC set.
Has anyone having any idea on the above 2 questions.
Thanks
SmitaI tried with the BC Set but it was not possible for me to make it work. Finally I have used Process Controlled Workflow (WS40000014).
Maybe you are looking for
-
I think this question is similar to a few others but I'll post it anyway. My computer crashed and when I got it back up and installed the hardware that came with my ipod nano, all my songs were erased from my library and when I plugged my ipod in it
-
How can I add an Image to a text
Hello I want to add a image into the block of text as in the following link: (you can see a image in yellow color=50 years is aligned with the text) http://www.gammonconstruction.com/hk/eng/home/default.html How can I do this in DW-2004? do i have to
-
I'm not a developer,and this is probably the wrong place to post this. It's really a small, silly thing....but I play Literati on Yahoo, and all of a sudden, across the bottom of my screen blocking the chat screen is a bar that says Java Applet Windo
-
ANSI X12 meta data availability in conversion agent??
Hello, Is there a provision for availability of ANSI X12 meta data in SAP conversion agent. We are trying to process EDI orders using the X12 INDUSTRY standard. Please advise. -Kris
-
Why a docx converted from a PDF file did not convert 1+ page from the source file?
In trying to work with data from several PDF files, I subscribed to Adobes's online facility to convert source.pdf to output.docx. Output.docx is missing more than a page of data I need. I don't understand why this is happening. I tried then to conve