CHaRM-Handling old transport request before CHARM was activated.

Hi All,
Recently i just activated CHARM in solman-SM1 for new a project implementation. This CHARM was setup in in such a way that it tie to one of the local IMG project EPROJ in developmemnt-DEV. Now i have one concern and that is those transport requests where created before i activated CHARM.
These old transport requests were crerated directly in DEV without project assigned. Therefore, we tried to assign IMG project EPROJ (the same IMG project setup in CHARM) into those old transport request manually.
Problem : When i tried to perform released step in CHARM tasklist it says that "No transport request found"
Question : How do i make CHARM to pickup those old transport requests?
Really appreciate your feedback as there are a lots of old transport request which needed.
Thank you.

Hi,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions ,,,,the system does not take into account transport requests that you added manually.
This note is what you want
Note 1150426 - Registering transport requests in ChaRM
Hope it solve ur problem completely.
Regards
Prakhar

Similar Messages

Unable to release Transport request in CHARM

Hi all,
After Setting up CHARM,created a Transport request,while releasing it thru CHARM gives error:"Release of system Q11 Could not be determined"
rgds,
rajesh
Message was edited by: rajesh
Rajesh M

Dear Rajesh,
1.Did you released the Task of the request in satellite system?
2.What error you get when you check inside the task list of that correction.
Please give inputs,which will help us in solving the issue faster.
Thanks and Regards,
Avinash.

Error in transporting request through charms

Dear Experts ,
recently refreshed my quality systems data with production data ..and finished successfully, but we did not take any screenshots before doing refresh in quality
my problem is we already configured charms in solution manager to transport requests to production system ...
now we are not able to transport request through charms .. because rfc connections are changed in quality ...
please let me how can i recollect quality rfc connections for charms ...
i dont have idea about charms configuration to reconfigure in quality.... please help in this
Regards

Hi,
You need to transport the ODS 1st and then the transformation.
The main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
          u2022The Infobjects should be transported first in a separate request.
          u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
           u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
hope this helps.
Regards,
Mahesh

The correct way to delete old transport request record ?

Dear all,
We want to delete old transport request record before 2008 (two years before) of our system.
We learn that we should delete the records in the below two path:
/usr/sap/trans/data
/usr/sap/trans/cofiles
Our target is that we will not see the old record after deleting in our PRD system.
Normally, we see the transport request record in system by this way:
STMS --> import overview --> PRD --> Import Queue system PRD --> Import history
Our question is do we need to restart our system after delete the record to refresh the Import history?
We have not delete the record now.
Any experienced or expert, please kindly give advice.
Regards,
Allen

Hello Allen,
there are some notes and documentations for this process. Deleting the files from /cofiles and /data will not erase the request from the import history, as you already know.
You should follow note #41732 to have the requests/data completely deleted from your system. There is a lot of complementary reading in notes #7224, #556734, #189841, etc.
Note that you can remove the request from the import queue, import history, data and cofiles subdirectory, but still have it on the <SID> buffer (located in /usr/sap/trans/buffer/<SID>). If this happens to you, please save a copy of the buffer file <SID>, then create a new, blank file named <SID> at a time when the import queue is empty (VERY IMPORTANT). Or, alternatively, please excute the tp cleanbuffer FIL command (which will erase the requests that are not found in /data and /cofiles directories).
--> Please test this first on a test system, not directly on a productive environment.
This should be enough to delete old transport requests on your system.
Best regards,
Tomas Black

HT204053 How do you get your last batch of down loads to the new computer if the old one crashed before i was able to get it on my ipod

How do you get your last batch of down loads to the new computer if the old one crashed before i was able to get it on my ipod

See Here > Download Past Purchases
http://support.apple.com/kb/HT2519

Old transport request for sap script (form)

Hi,
I want to find the old transport request for the sapscript(form). Just now it has been over written by the latest CTR. So i need to transport the old one.
How to find out the old transport request.
Thanks,

Try giving the script name in OBJ_NAME field in table E071 and then execute and it will give you a list of all transports. You can sort it in descending and see the order of transports.
Thanks,
Srinivas

Error when importing a Transport request in CHARM???

Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
Anand

HI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand

CHARM : Sequence of transport request to import

Hi,
I'm configuring CHARM and found out below issue.
Scenario.
1) Charm project with project type implementation was created in SOLMAN. The type of change is normal correction. All transport request was created under 1 task plan. The transport was created based on configuration and some of the transport request have dependency to others transport request.
For example.
a)GL account need to be created in FI and was assigned to TR002.
b) MM need to configure the GL account that was created in a) and was assign to TR001
Issue
When the TR was release, how do we ensure that the sequence of import to QAS client and PRD client must follow the dependency of the TR created?
Appreciate your input.
regards,
Biah

Hi Sir,
I am working in SAP Solution Manager. I would like to know some concepts regarding CHaRM:
Currently our project is using Transoport Proposal. We will soon shift using CHaRM. But I am not aware of the Technical concepts.
1. How to configure CHaRM with the Tranport Proposal Flow.
2. How to navigate in CHaRM? (screenshots can help).
3. I am aware of the process but still after creating a CHaRM how do the Developer navigate to do a change in DEV system.
will he go through CHaRM. (please explain me).
4. Also explain me the total process from technical point of view till the CHaRM closure.
5. I am aware of SOLMAN in this process where the Charm requests are collected and monitored.
Hope I will get a good guidance from your end....

Merging Java Transport request with Abap Transport Request in Charm

Hello All,
We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'.
However we have some SAP systems that have CTS+ integrated which allows to generate transport request number and attach objects in PI Integration Directory - java transports.
Question is - Is there a way we can integrate the java transports generated in these SAP systems with Solution Manager CHarm and transport creation.
Or can we assign the java transports to charm in any way.
We are basically looking for how when users create Charm, the abap and java transports relating to the charm are generated and created only from Solution Manager manager or how these two transports can be linked together in Solution Manager.
Thanking you in advance for your help.
Tolly

Hello Friends
I have read the links and followed the instructions and tried to create object
TABLENAME R3TR TABU and tried to save it.
I keep getting a warning message
Note: ZTABLE1 is an application table
Object TABU ZTABLE1 has object function "k", but no key.
(I don't know what key to enter. I tried the Key field name, but it said 'Enter Numeric values only').
If I ignore and save and try to create transport request and then import it on a different server, again only table structure is getting transported and not the contents/data of the table.
I would appreciate if some one can please let me konw what I am doing wrong.
Thanks
Ram
Edited by: Ram Prasad on Jun 2, 2009 3:38 PM
Edited by: Ram Prasad on Jun 2, 2009 3:40 PM

Error when creating transport request in Charm for Portal

Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
David

Hello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark

Issue in Transport Request of ChaRM

I have created a Transport Request made import'd to Q-Sys, Now i need to Make some changes I've set the status to IN-dev & made changes & saved ,also released the transport request, still no changes found, Plz suggest me a remedy?

hello Savithru,
the normal process to import in QSystem your change via charm is to run the action "test transport" when you are "in development" for normal change document (SDMJ). You need to release your task prior to this action.
This action will create a copy of your intial transport and will release it to the import buffer of your Q system. (the initial transport is NOT released). You can see the transport number in your log in your change document.
The actual import in Q needs to be scheduled manually or automatically
Do you see your transport of copy in the import buffer of your Q-System ?
I hope it helps
br Xavier

ChaRM: Creating multiple transport requests

Hi Team,
I am working with Sol MA n Charm urgnt crction (SDHF). I am executing the action "Create Transport Request". The pop-up appears to create the tranpsport request. I have selected both workbench and customizing requests. The transport request got created successfuly in the ECC DEV system. Now i am trriggering the action "Create New transport request". The same pop-up appears. Now i am selecting, ustomizing requesting check box. The action is executed successfully. But the transport has been NOT created in satellite system. Why it so? Can't we have two opencustomizing requests for urgnt corction (SDHF)?
Or any configuration required to enable this?
Regards
PSK

You cannot have more than one open request for the urgnt correction.if u want to create new request , you should release the existing one You can always create tasks in the open TR.
Regards,
Sam

ChaRM: link between ChaRM message and Transport Request

We use the action 'Release Transport Requests' in the task list of the
Maintenance Cycle to release all assigned Transport Requests. In the
pop-up window that appears we see all Transport Request numbers and the
transport description.
Is there a possibility to add an extra column in this pop-up screen, to
see the link between the Correction number and the Transport Request?

I agree on this one.
However, a naming convention for OSS notes and FRICE is implemented over here.
That's why it would be useful to have an additional column.
The link is somewhere in SAP, because when you go to the tab Project Structure in TA /TMWFLOW/PROJ for the selected Maintenance Cycle, you see which Transport Requests are assigned to which ChaRM msg.
Roel

CHaRM-Action "Create Transport Request" is cancelled

Hi All,
when i click on the action "Create Transport Request" and save the change document the following error is displayed
"Action Create Transport Request in system SM2 200 of type Source Systems has been cancelled"
where SM2 200 is our Dev Client in the same Solution manager.
i did add the SAP ROLE "SAP_S_RFCACL" to the user in both the client and gave full authorization
but it did not help.
Regards,
Pradeep L

hi Pradeep,
i am doing ChaRM configuration in our Solman system and also new to this.
i need help for "Create Transport Request" from CRM action....
Is it possible to create TP request from CRM action??
if yes please guide me how to do it?
Expecting ur reply...
Regards,
Selvakumar RV

How to find a transport request attached with an activity

Hi All,
A plant was deleted in development system and moved to quality. This is not yet moved to Production.
I want to find with which transport request this change is moved to quality.
I have used SE03 but no luck. I may be doing wrong. Please help.
Thanks in advance for your help.

Hi Friend,
Goto the Transaction code SE01, there in the Menu you can fine the Find request option ,
If you goto that screen in the next screen you can find the REQUEST TYPE and click on that , you can find the task type and their click on your Activity type and execute...
You can able to find TR.
Or
If you know the program or Function module to which the changes are applied , then it is more easy..
In the program SE38 , in the Utilities you can find the VERSION MANAGEMENT.
There you can find teh TR..
Hope it is clear, if not revert back with more details.
regars,
santosh

CHaRM-Handling old transport request before CHARM was activated.

Similar Messages

Maybe you are looking for