CHARM how to add new user status to change document

Can someone please suggest how to add a new user status to a change document ?
I am looking into adding status "Pending" to Admin correction SDAD.
Thank you in advance
Elena

Hello,
Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
SAP Solution Manager
-> Scenario-Specific Settings
-> Change Request Management
   -> Extended Configuration
    -> Change Request Management
     -> Change Transaction
      -> Change Transaction Types
        o Define Status Attributes
Also activity "Make Settings for Change Transaction Types" in the same path is important.
Best regards,
Miguel Ariñ

Similar Messages

How to add new user status in Solman

Hello,
I wanted to add a new user status in Solman.i have added one new user status " reopen" . but when i checed it is showing as "no status".
I have also checked the table TJ30T, in this table we have 2 entry for all other user status one is in english and one is in german.
Please let me know how to add entry in this table or is there any other ways to add new user status in solman.
Regards,
Bhavesh

Hi Abhyankar,
Explain the scenario where you want to create a new user status?
General remark:
Creation of new user status can be for 2 cases: Whether you want the status to show up in the status field or you want to only use the status to search corrections and the status is displayed in "Further Statuses" tab.
If you want to use the new user status for searching the corrections and this user status will be manually set, then you need to create the status in CRMBS02 transaction without specifying any status numbers.
Then the new status will be available in "Further statuses" tab and you need to manually set or unset the status.
If you need your user status to reflect in the status field then you've perform the following actions in SPRO:
1. Create Authorization key for the new status
2. Create the new status with status number and order of visibility; assign the authorization key to the status
3. Create the action which will set the status
4. Add the action in the action profile
5. Write the schedule condition required
These steps are on a high level. Hope this helps you to decide.
Regards,
Sameer

How to add Product User Statuses?

hi all,
I need to add new user status values in the Sales Status list for the Products object.
The standard only has 2 statuses : blocked with error, blocked with warning. (see field Status in the Sales data tab of the Commpr01 transaction in CRM gui)
I tried to play with the status management entry of the SPRO (CRM/master data/Products/Status management) : i created a status profile, assigned it to the Master data object. But, the values do not appear in the list.
Since, our CRM is connected to an ECC system, and the products are actually replicated from ECC, I also tried to change the values in ECC thanks to the menu Logistics general/Material master/settings for key fields/data relevant for S&D/Define sale statuses : i added a few statutes, then relicated the table TVMS to CRM. I can then see that the values have been replicated to the CRM table (CRMC_TVMS). But, i still cannot the values in the drop down list box of the sales status in the Product master.
Any idea anyon?
thx
Lud

hello lud ,
The status profile can only be viewed in new UI not in SAPGUI.
Please perform the following steps
1. Go to transaction BSP_WD_CMPWB
2. open the component PRDHS
3. Go to the view PRDHS/Header
4. In the configuration add the field 'Status Profile' to the view.
Now test the again.This should solve the issue.
Also ensure that the sap note : 1249450 is implemented in the system .
Thanks & regards,
krishnen Subramanian.

How to add new users to BPM 11g

In BPM 10g, I can add new users and roles in administrator console. How to login to BPM 11g administrator console and add new users?

While creating Human Task did you selected "Initiator" in the Pattern?
Login as administartor(weblogic) go to Administration the you will find all the processes and corresponding roles. There you can add/modify the users to the processes.
Let me know if you have any questions.
Thanks
MC

How to Add a field in Asset 'Change Document'

Asset Change documents displays only room number & room type in old & new fields. I would like to add fields like BUILDING NAME, ROOM NUMBER, ROOM TYPE & LOCATION STATUS CHANGES.
Thanks,
Kiran
Edited by: kiran dasari on May 26, 2010 12:47 AM
Edited by: kiran dasari on May 26, 2010 10:49 PM

Please follow these steps :
1. Use the user exit AIST0002 and add coding in :
EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003
2. Add new fields in CI_ANLU structure
3. Develop subscreen in function group XAIS
4. Determine the Layout. Open t-code : AOLK then select Asset Class which you want to implement then click on folder 'General Assignment of layout'. Note the tab layout but the tab layout default is 'SAP'.
5. Open t-code : AOLA. Copy the tab layout 'SAP' to create another layout ex : 'YSUB'. Then Add a new entry and double-click on the folder 'Tab Page Titles'. You want to put your custom fields in the tab page u201CGeneralu201D. So, select this tab page entry and double-click on the folder "Position of Groups". Here, all the field groups currently residing in the tab-page u201CGeneralu201D are shown. Add an entry for your newly created fields. Select the group box from the list. An entry will come with u201CUu201D padded with the custom subscreen prepared by you. Then, save and come out.
6. Assign the new layout to Asset Class..Open t-code : AOLK again.
7. Open t-code : AS01/AS02/AS03 again.

How to add new line items to FI document

Hi,
When doing a Post Goods Issue From VL02N I need to add a new line item to the posted FI document. BADI AC_DOCUMENT allows you to change the FI document, but it doesn't appear to allow you to add any new lines. In fact the Exporting parameter EX_DOCUMENT-item doesn't even have all of the line item fields like the GL account(hkont). Can the item component be extended to add the other item fields?
Or is it best to use a Business Transaction Event such as Process 1120??
Thanks for any and all advice!
Doug Crabtree

Hi Chris,
The $20 difference represents a variance between what is the Material Master standard price and and another price that is maintained because of the current rapidly escalating commodity prices. This amount and cost center to post it to has to be determined dynamically at posting time from VL02N. Finance wants to be able to post this variance to account 40100 to be able to track this. Our FI analyst has determined that this isn't possible using config.
A possible solution is to create a custom program to post an additional FI doc using a BAPI with the additional line item and run it as a periodic job, however a real-time solution would be preferred.
There are BADI's and substitutions to substitute values, but I haven't found any great way to add additional line items. Even several BTE's I have looked at such as PROCESS_00001120 say not to change bseg lines.
Any help or advice would be greatly appreciated. Thanks.
Doug

How to add iphone user agent in safari browser running on windows xp

How to add new user agent (iphone user agent) to safari browser(version 3) which is running on windows xp os .
thanks in advance

UPDATE: We were able to further identify the root cause of the problem to be when anonymous access is turned off and the subweb is set up to use basic and integrated authentication (IIS settings). To test this, we removed integrated authentication (leaving only basic authentication in place) and the problem was fixed. However, this is not a viable solution as we need to use integrated authentication (for various other reasons).

Document user status not changed from follow-up document

Hi gurus!
My task is to set new user status of primary document (service order) from follow-up document (task) after follow-up document is created.
To do this I've created Badi-impl. of ORDER_SAVE Badi and in PREPARE method when saving newly created follow-up task I'm setting new service order user status using 'CRM_ORDER_CHANGE_STATUS' function. sy-subrc = 0 and, moreover, when in SAP GUI I'm pressing "Back" button I see new user status in service order. But after I'm pressing "Change" or re-open the service order - I see the old user status, so nothing happens at all.
Why could it be?
Thanks in advance.
Best regards,
Alexander Kirillov

Hello Szymon,
The solution is:
1. CALL 'CRM_STATUS_CHANGE_EXTERN_OW'
2. If ok - CALL 'CRM_STATUS_SAVE_OW' passing relevant header/ item GUID
Regards,
Alexander
Edited by: Alexander Kirillov on Jul 17, 2009 6:47 PM

Add new User Awareness Status Messages(Collboration)... :)

Hello All,
I want to add new user availability status messages (which are related to Awareness Status Selector in Collaboration).
When an user enables the Collaboration Launch Pad, the user can enable on:
i> Auto Detect Status
ii> Not Available
I would like to add essages like "Be Right Back", "In Meeting", etc....just like we have in Yahoo Messenger.
I found the par file which is respensible for such Collboration feaures & its:
"com.sap.netweaver.coll.shared.ui.par"
but when I opened the par file to check the details...noticed that all is in the portalapp.xml file.
Cannot understand where can i add new messages....
Please help...
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan
<i>Note: Please excuse me for posting this in EP Development Content and not KMC Forum section.</i>
Message was edited by: Ritu Hunjan

Reinstalling isn't a drastic measure w/Snow Leopard. It just replaces all OS components with new and uncorrupted ones and Apple's basic apps, such as TextEdit, Mail, Safari, and Terminal. That eliminates any mucked up ones. Once you assure yourself that the problem's solved, make a bootable backup/clone or Time Machine backup and update via Software Update. Let us know how it turns out.

How to add New status values in product

Hi,
In product master COMMPR01 presently system is shwoing only two vaues Blocked (ERROR), Blocked (Warning), even I have downaloded the sales staus from ECC to CRM using R3AS object 'DNL_CUST_PROD3' but on the screen system is not shwoing thos values.
How to add new values in staus field.
Regards,
zafar

Hi,
Refer these links
Re: GR for a production order
status profile
Regards,
Vishal

How to create a user new user status as closed for aWBS element

Hi,
Can any one explain me the process of how to create a new user status '' Closed'' for the WBS element which when trying to close has error and are not able to close. So can we create a new status inroder to close the WBs element
Thanks nd Regards
Sri

Hello Srihari,
Use OK02 transaction to create a status profile. You can create a new user status in the status profile.
If you already have a status profile which is maintained in the master data, then you can create a new user status as closed to that status profile.
Hope this will help you..
Regards,
Praisty

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new fields in SAP-Query

Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.

hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
         matnr like mara-matnr,
         erdat like mara-erdat,
         end of itab_mara.
data : begin of itab_marc,
         matnr like marc-matnr,
         werks like marc-werks,
         end of itab_marc.
data : begin of itab_final,
         matnr like mara-matnr,
         erdat like mara-erdat,
         werks like marc-werks,
         date like sy-datum,
         status(10) type c, * new fields
         end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
        Vinutha YV

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

CHARM how to add new user status to change document

Similar Messages

Maybe you are looking for