Charm Integration with an existing landscape
Already configured a demo charm setup in our system and working succesfully
How to integrate ChaRM configuration which is made on the Solution Manager to a ECC production landscape, otherthan logical components and other setup. There is also a PI landscape which is to be integrated to the same charm configuration after this. What are the modifications to be on the TMS of ECC landscape to make this to happen, Should i use Domain Linking technique to link the ECC and PI landscape with ChaRM
My advance thanks
Prakash
>
Jayaprakash V wrote:
> Already configured a demo charm setup in our system and working succesfully
>
> How to integrate ChaRM configuration which is made on the Solution Manager to a ECC production landscape, otherthan logical components and other setup. There is also a PI landscape which is to be integrated to the same charm configuration after this. What are the modifications to be on the TMS of ECC landscape to make this to happen, Should i use Domain Linking technique to link the ECC and PI landscape with ChaRM
Hi,
Your question seams not be VAR specific.
I could offer you to move this thread to the general forum.
Just let me now.
Best regards, Ruediger
Similar Messages
-
A4j integration with an existing datatable
Hi,
I am new in using ajax. Could any body help me out in adding ajax4jsf for a datatable so that only the contents of the datatable will get reloaded not the entire page.>
Jayaprakash V wrote:
> Already configured a demo charm setup in our system and working succesfully
>
> How to integrate ChaRM configuration which is made on the Solution Manager to a ECC production landscape, otherthan logical components and other setup. There is also a PI landscape which is to be integrated to the same charm configuration after this. What are the modifications to be on the TMS of ECC landscape to make this to happen, Should i use Domain Linking technique to link the ECC and PI landscape with ChaRM
Hi,
Your question seams not be VAR specific.
I could offer you to move this thread to the general forum.
Just let me now.
Best regards, Ruediger -
ChaRM integration with third party tool
Hello,
I have some talks withn customers regarding a scenario where Change Requests comes from a third party tool like HP Demand and Portfolio Management. A possible scenario is when there is a request for change which goes for a complex review and process approval before going directly into the ChaRM creation, without going into a service desk ticket.
I imagine a kind of web service similar to that of the Service Desk but in this case to work with the SDCR or SDHF tickets, so that external systems can interchange data with those Charm tickets. Does anybody face such type of integration?? What other alternative path you follow for this requests which do not come form a incident/problem workflow?
I appreciate your comments.
Regards
Estebanlook here:
<a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a> -
User license query while integrating with SAP HR system
One of our clients wants to develop web based employee self service applications (web enabled modules) on their existing SAP HR suite.
Currently they are on SAP HR , ECC 5.0
Would they need to buy extra licenses for integration with the existing system or can the existing licenses be used concurrently?
I am not sure where to look for this piece of information. In case this question is inappropriate to this forum my apologies for the same.
Best Regards
YuvarajYuvaraj,
The best thing would be for your client to contact their SAP account representative and check how many and what type of users their existing licensing agreement with SAP includes.
Best Regards,
Alexandra -
Integrating a PHP Web App with an Existing Azure Mobile Services and Mobile App
I've got an existing mobile app that is integrated with Azure's mobile services. The mobile services are currently connected to Azure Active Directory with MFA enabled. I'd like to build a separate PHP-based web application (Azure VM) that uses this existing
mobile service and authentication.
I reviewed the Azure PHP SDK, but didn't see any tie-ins to the Mobile Service. Additionally, Azure has some great tutorials, but for mobile services they all seem to focus on iOS, Android, and Windows phone. Any insight into how to tie a PHP-app into this
backend would be much appreciated!Although there isn't any client library for PHP, you can still access Mobile Service using the
Azure Mobile Service REST API.
Abdulwahab Suleiman -
ChaRM with 4 system Landscape.
Hi,<br />
We are trying to implement ChaRM in a four system landscape <br />
<br />
AFD --> AFQ --> AFI --> AFP<br />
<br />
defined logical components, project, created maintenance cycle. U'gent correction works fine.<br />
<br />
but for regular correction, we are able to create TRs release it, but not getting imported into AFQ and of course further steps are not happening. When the status is "Development Completed", we perform "Log on to system", this pops up with a dialogue with options<br />
<br />
AFQ 200<br />
AFI 100<br />
<br />
to logon to system.<br />
<br />
This is the only clue we got. <br />
<br />
When we perform the actions, the status keeps changing and goes to status "Production". It doesn't obey the phases maintenance cycle as well, irrespective of the phases the status keeps changing and goes to status "Production"<br />
We are missing some minor thin's.<br />
<br />
Have we defined the system roles properly? IF not, how does the flow works perfectly fine with respect to U'gent correction.<br />
<br />
Please help.<br />
<br />
<br />
Regards,<br />
Ragu<br />
<br />Hi Ragu,
I have a few questions here:
1. What normal correction type are you using - SDMI or SDMJ
2. What roles are assigned to the systems in Logical Components? I believe they are setup as Target Systems and thats why you get the pop-up with both systems when you execute 'Logon action' after 'Development Completed'
3. What is the STMS setup for this landscape?
4. Urgnt should behave properly coz it takes the shortest route to production. Can you check the tasklist of Urgnt and see if there are only 3 systems there?
Regards,
Kriti Bhalla -
Integration with existing business applications
Hi, could anyone share with us in what way OBIEE is commonly integrated into our existing business applications?
By a linked page embedded or just let users log in to dashboard or any by api or by webservice or any others?
Thanks!Hi
please refer following links, so that you can get some understanding in using SOAP API of OBIEE with other technology(Java/PHP) web applications...
http://oraclebizint.wordpress.com/2007/07/31/customizing-obi-ee-soap-api/
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp
check below url in your local installation to see what are the web service methods available for you to communicate..
http://localhost:9704/analytics/saw.dll?WSDL
for a simple and easy way 'gourl' functionality can be used..but necessary care to be taken as you pass your username and password in url parameters..
check below tutorial..
http://oraclebizint.wordpress.com/2007/07/30/customizing-obi-ee-%E2%80%93-go-url-parameters/
hope thats solves your problem!
-Niranjan K -
Integrating MetadataRepository with an existing DataBase
In OAS10G 10.1.2 ,how to integrate MetadataRepository with an existing DataBase10g
You'll need to use the Internet port on the device,
Also you may need to enable the web management portion of it.
dial ****7932# and then press 1 # and 1 to save -
Exchange Integration with MSX-A on a Windows 2003 Server
Hi
We try to integrate Microsoft Exchange (Version 2003 SP1) into SAP Enterprise Portal 6.0 SR1. The MSX-A components are installed on the OWA System, a different Windows 2003 System with Outlook XP (SP3) on it.
The error displayed in the Calendar iView on the Portal:
"An internal error occurred while generating the XML from the MSX-A component"
From the "SAP EP Test Exchange Transport Setup" Tool an error occures on the "Data Retrieval" Test:
"An error occurred retrieving the data."
and in detail:
MAPI_E_LOGON_FAILED(80040111)
MS KBase http://support.microsoft.com/kb/181739/en-us didn't help. To resolution 3: Policy "Log on Locally" on a Windows 2003 doesn't exist anymore (?). "Deny Log on Locally" isn't given to relevant groups.
Thanks and best regards
Nicolajhi All
i am illustrating the process of integration the central notes to be referred and constraints .hope this definitely helps you please do not forget to give full points for this effort
with regards
subrato kundu
<b>Process</b>
Microsoft outlook Integration With SAP Enterprise Portal 6.0
(Process description)
These documents describe the entire process of integrating Exchange server with enterprise portal server to leverage the usage of lotus notes within the portal framework.
Step1: Create a System
o Choose System AdministrationSystem configurationSystem LandscapePortal ContentContent Provided by SAP. Right click on collaboration and then choose New From ParSystem.
o Select com.sap.netweaver.col.app.gw and choose next.
o Select a server (Microsoft Exchange server) and then choose next.
o Enter the System Name and ID (for ex Exchange) and choose next and then finish.
o Enter System Aliases by choosing system Alias from the display drown list.
o Enter the system Alias in the alias field and choose add and then save.
Step II: Create E-Mail Transport
 The email transport defines the SMTP server and other configuration required for sending e-mails. To configure an e-mail transport choose
 System AdministrationSystem ConfigurationKnowledge ManagementCollaborationGroupWare TransportsMail Transport
 SMTP Sever: The address of the SMTPServer for sending e-mails
 Sent Messages: You specify the folder on the server where the sent e-mail is to be store: -Sent Items on Microsoft Exchange Server.
 System Alias name: Alias that was defined for the groupware server in system configuration.
Step III: Check E-Mailing Service
This is a global service that is required for sending e-mails and which can be located by choosing System AdministrationSystem configurationKnowledge ManagementContent ManagementGlobal servicesMailing Service. This service needs to be active and an email transport must already have been created.
Microsoft Exchange Transports
The overall transport consists of two parts: MSX-J on the portal server and the MSX-A on the Exchange Server or a machine near to the Exchange Server.
MSX-J is the java part that runs on the portal server is deployed automatically on the portal server during installation, and implements the groupware API.It uses the Groupware APIs and repository development kit.
MSX-A is the active server page and sap exchange connector.dll running on a n iis server with Microsoft Collaboration data objects (CDO) and in the same domain as the exchange server or in a trusting domain .The ASP and DLL are Collectively CALLED MSX-A and is installed as part of the Outlook Installation. This needs to be installed on every IIS SERVER dedicated to the MS Exchange Server
The Process flow is
1.TheMSX_J transport makes an HTTP(s) call to the MSX_A running on the IIS.
2.Microsoft Internet Information Server (IIS) uses Basic Authentication to authenticate user based on NT user/password against the Microsoft Exchange Server.
3.CDO uses the authentication token and fetches the data.
4.MSX-A converts the data into XMl and returns it to MSX-J
Installation of MSXA Components
You have to carry out these steps for every IIS that accesses the exchange server or the Outlook WEB Access 5.5 SP Server in the system landescape:
1.Locate the MSX-A component shipped with Exchange transport.
The components can be found in<irj>\root\WEB-INF\PORTAL\PORTALAPPS\com.sap.netweaver.coll.appgw\WEB INF\external\Exchange.
2 Locate an IIS that is in the same domain as the Exchange Server or in a trusted domain.
3.Create a folder on the IIS for example,c:\SAPExchangeTransport.
4.Copy the MSX-A Components to the folder you just created.
5.Register the DLL by using command regsrvr32 in the command prompt for example c:\winnt\sysytem32\regsvr32.exe c:\SAPExchangeTransport\SapExchangeConnector.dll
6.Create a new Iis Website or if using Outlook Web Access 5.5 sp4 create a virtual directory
Since most of configuration errors arise in the setup and configuration of the MSX-A components a separate test application is shipped with the connectivity, which allows you to check that the setup is correct.
1.locate SAPPXchTest.exe which is shipped with the exchange transports.The components can be found at <irj>\root\portalapps\com.sap.netweaver.coll.appl.gw\external\exchange.
2 copy the executable file to the machine on which the MSX-A component has been deployed.
3.Test the CDO version by launching the executable file on the machine on which msx-a was deployed.Choose Test CDO-Version .You should receive a success message .if you recive an error message follow the instructions given
4Test data retrieval by launching the executable file on the machine on which MSX-A was deployed choose TestData Retrieval Fill in necessary fields you should receive a success message but if you receive an error message follow the instructions given
5.Choose Save Results
6.open the log file indicted by the message
<b>Notes</b>
0000801234 Additional attachment in room created appointments
0000788151 Post Installation Steps for Groupware after an upgrade
0000763062 Problem creating an appointment with attachment
0000738965 E-mail address is mandatory for Groupware Integration
0000736644 Mandatory Steps for MS Exchange Integration
0000736541 Support information for MS Exchange Integration
0000732911 Integrating Outlook Web Access in Enterprise Portal 6.0
0000712902 SSO to Outlook web access using user/password does not work
<b>Constraints</b>
Constraints of Microsoft Exchange Connectivity
 The Microsoft Exchange transport currently only support items with types appointment and meeting request .Other types such as discussion and not currently not supported.
 Deleting an instance of a recurring appointment affects only that particular instance
 Calendar items in personal folder are not supported. Users can only view and modify items located on the exchange server from the iviews
 Public folders on the exchange server are not supported
 Calendar items are delivered as such if sent to recipients within the intranet .If the recipients is in different domain than the sender ,the format in which the items are delivered depends on the server responsible for sending the item in question -
Java Stack mandatory for a SAP BI system integrated with EP?
Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
KumarHI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar -
RE: Legacy Integration with PI/Open
Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Unity Connection Integration with CS 1000 and Meridian 81 - PIMG
I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob -
OIM Integration with Active Directory Federation Services (ADFS)
Hello friends
I have a question about the integration of Oracle Identity Manager with Active Directory which is federated with another external directory for ADFS. My question is:
What considerations should be to contemplate if I have an active directory federated environment when carrying out the integration with Identity Manager?
I use version 9.1.0.2 of Oracle Identity Manager with Microsoft Active Directory Connector User Management 9.1.1.7
Thanks for the support.First consideration is that the OIM's target ADFS - in the federated scenario, will that participate as a Service provider or identity provider. I would think identity provider.
Next consideration: What all attributes are required to be played in the SAML assertion to the other end-point? All these attributes must be present and should be provisioned to the AD in this case.
So, OIM should be set up (UDF etc) to provision all those attributes needed in the SAML.
Next consideration: What all scenario to support? IdP initiated or SP initiated? If SP initiated, then process will hv to be defined if a user id does not exist in the AD of the OIM target. Will the request be failed or a in-time provisioning should happen.
Hope this helps. -
CRM 5.0 Integration with Twitter and facebook
HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements? -
SOA 11g Worklist Apps Customisation and Integration with Plumtree Portal
Hi,
We want to migrate an existing application build using SOA Suite 10.1.3.3 to 11.1.1.2.0.
In the 10g application the worklist application was customised and the customised apps was linked as a remote portlet in BEA Plumtree Portal.
1)In 10g the worklist application source code is available (\SOA_Oracle_Home\bpel\samples\hw\worklistapp) for customisation but is that possible for 11g ?
(The location of the default deployed worklist apps in 11g is /../mdw_home/user_projects/domains/soa_domain/servers/soa_server1/tmp/_WL_user/worklistapp).
Can we take the source code and customize in jdev and deploy under a different contextname in 11g??
3)Our existing 10g worklist was customised a bit in terms of look and feel and for some custom authentication and it was deployed in the 10g SOA Server.
A sample jsp application was created and the login page of the custom worklist apps was linked in a inframe so that it works when integrated with the Plumtree portal as a remote portlet. And this worked perfectly in 10.1.3.3 SOA Suite.
However the 11g SOA worklist login when tagged in a jsp as an inframe in plumtree portal is giving a warning message
Warning: Unable to load content in a frame. Frame content will load at the top level. On cliicking the OK button the worklist page is opening. This is with Firefox browser . however form IE7 or 8 its timing out from portal.
As per http://newsoalife.blogspot.in/2009/09/framebusing-in-adf.html
changing the web.xml for the worklist can help.
Can anyone please let us know on the same as this appeas an unsupported one.
Regards
AshifHi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul
Maybe you are looking for
-
Office 2013 and SharePoint 2013 server properties - The required term set is not available.
Hi, After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not availabl
-
My macbook will not download any apps from the app store. im running on mac os x 10.6.8. I don't know how to fix it, help?
-
How to access access ViewRowSetImpl in executeQueryForCollection
Hi, I have lets call it a Bill of Matierial (BOM) VO that is backed by the database partially. I show this BOM in a treetable. Now for some line items in this BOMVO I want to get dynamically BomLineItems that donot exist in my DB but are in external
-
my mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?
-
Having trouble disabling video previews
I have Adobe Premiere Pro CS4 and 1.5. I recently upgraded to Windows 7 from Windows Vista. While on Vista I only had 1.5 running on my computer. Since upgrading to Win7, I noticed that when I upload a video file into the timeline, I am forced to