ChaRM- Is data scrambling required for Implementing ChaRm in SM?

Hello
Is data scrambling required for the implementation of ChaRM in Solution Manager?  Iu2019ve heard that data scrambling is a requirement for CHaRm and if so is there documentation from SAP with the specifics.  I do not understand why data needs to be scrambled for transport management.
Thanks!

We are using CHaRM since 2007, and there is no data scrambling for CHaRM itself required. CHaRm is jsut taking control over TMS. It is a process to ensure some quality and to facilitate audit.
Regards,
Holger

Similar Messages

  • Master data required for implementation

    Hi all,
    We are going for a university implementation. Could someone tell me what master data is required for implementation from client. Like student data, learning content data, grading system,
    My next question is which third party tool is good for library management & class and exam scheduling.
    Thanks
    Ravi

    Hi Vinod,
    I need some information about the implementation of SLCM. I have found some standard documentation about the functions it offers, but they usually give an overview. I couldn't access any information on issues such as the technical prerequisites or how to implement it yet.
    As no such project has been implemented in my country, I'll keep on doing research online. If you have any documents that would be useful to implement or at least to understand the implementation process of SLCM, they would be of utmost value for me.
    Thanks in advance
    Aslı

  • What are the pre requisites for implementing ChaRM

    Hi
    We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
    Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
    Thanks & Regards
    Anand

    The listed pre-requisites for the implementation of ChaRM are;
    1.  Already completed the basic configuraiton of SAP Solution Manager
    2.  You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
    3.  you have setup business partners for the users (or at least 1)
    4.  satellite systems are at the minimum  support package level required (note 907768)
    5.  connections are available to the satelite systems
    6.  CTS+ if you wish to control non ABAP change requests through ChaRM

  • Pre requisites for implementing ChaRM & CTS+

    Hi Experts
    We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems. 
    I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
    Thanks in advance
    Thanks & Regards

    >
    venkatesan janardhanam wrote:
    > Hi Experts
    >
    > We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems. 
    >
    > I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
    >
    > Thanks in advance
    >
    > Thanks & Regards
    Hello Venkatesan,
    There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
    Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
    Regards
    Amit

  • Prequisities for implementing ChaRM

    Hi all !
    I would like to know what are the prequisities for implementing ChaRM 7.1 in SAP Landscape ECC 6.0 ,and which Sap Note are necessary for this implementation .
    Regards

    SolMan must be in high availability mode,
    Transport Management should be through SolMan,
    At the time of DR the ChaRM will be down,
    Adequate resource provision must be made for SolMan,
    As per OSS the last patch should be deployed - currently it is SP11.

  • Customer Data Hub Required for EBS 11i?

    Is the Customer Data Hub required for EBS 11i to work correctly? It appears to be a supplemental product and not a required core product.

    Oracle Customer Data Hub (CDH) is not a mandate for EBS users. However, it solely depends on the Organizational needs. If an Organization decides to have SSOT (Single Source Of Truth) for it's customer data they can go with CDH solution.
    CDH is a complete packaged solution that allows companies to create a single, enterprise view of their customer base, by consolidating/synchronizing customer data from heterogeneous systems into a central, operational, data store. CDH alone will not suffice the requirement. CDH ties with Oracle Customers Online (OCO), Customer Data Librarian (CDL), and the Oracle Trading Community Architecture (TCA) to create a robust, scalable, central repository of duplicate-free, enriched data across a heterogeneous landscape.
    Hope this helps.
    Regards,
    ND

  • What are the data collection requirements for CAND?

    Please explain the exact data collection requirements for CAND (Connected Analytics for Network Deployment). Thanks

    CAND needs to collect the following show command outputs for analysis: show version, show running-config, show module (or show diag, depending on the platform).

  • To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

    To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

    Thanks for the reply.
    But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

  • CHARM- No task list found for implementation project

    Hi All,
    I created an implementation project, and created a task list for the implementation project.
    But when i create a change request with normal correction, The Task list is not getting displayed.
    I am facing a conflict also, When i directly create a correction document without creating a change request. I am getting the task list for implementation project.
    Why is it am getting the task list for Implementation project in correction document and not in change request.
    When i tried to explore. found that in change request it is getting the list of maintenance cycles(Maintenance projects) and not the tasklist for other type of projects.
    Our customized flows are all dependent on the change request. So Is there any configuration i can do to get the task list of implementation project also in the list.
    Kindly guide on this issue.
    Thanks in advance.
    Regards,
    Subhashini.

    Hi Xavier,
    I  was also checking that one only.
    For the standard transaction type SDCR, it is working perfectly as you toldh when i select development(Implementation).
    But the problem is, here we have customized SDCR to ZDCR with our follow up documents.
    When i try to include the Code group of implementation(Implmntn), Nothing is happening.
    The subject is getting included in the list. but iam getting only the list of maintenance project only.
    I have made the changes in copy nsontrol also. but i dont see any difference.
    I could not able to trace where exactly i need to do the customizing to bring the list of implementation projects in my change request(ZDCR) when i select the subject( Project-implementation(SDMI))
    Kindly advice.
    Regards,
    Subhashini.

  • Hardware requirement for Implementing RF

    Hi Experts ,
    Our client is looking forward to implement RF in Warehouse ;Can any one let me know what are the hardware requirements ( Servers required ) to implement RF.
    1. If they intend to use a Character based hand Held device.
    2. if they intend to use a GUI Based hand held devices.
    Looking forward for reply
    Regards
    Albert.

    Hi,
    If you are having the User Id to use the service.sap.com, you will find all the documentation related to RF, if you don't have the User ID, please check out the following;
    1. Apart from SAP Server, you need to install the Telnet Server, if you are using the SAP Console.
    2. If you are using the Third Party interface for RF Scanners, they will install the third party interface software instead of Telnet software.
    3. Recommended vendors for RF are; Techlogix, LXE, Intermec.
    4. You need to make sure about the Screen formats and the network coverage and the range for the Access points which you use in the warehouse.
    Hope it helps you.
    Aktar

  • How many revolution​s of data are required for order analysis?

    Hello,
    I have a requirement to collect, process, and save data for several hours at a user specified sampling interval.  I suspect that I will need to use the speed of the motor to determine how many revolutions of data I am collecting.
    Is there a minimum number of revolutions of data required for order analysis?
    Thanks,
    Chris

    HI Chris,
    Thank you for posting on the National Instruments forum.  To determine how many revolutions of data that you are collecting, you will need to use the tachometer signal that is coming off of your motor and is defined as pulses per revolutions.  With this, the absolute minimum that you need is two pulses to figure out how fast your motor is spinning.  With only two pulses, however, it will be very hard to determine the order information. 
    I think this KB will help you in figuring out what Window Length you need when doing order analysis.
    How to Select the Window Length When Extracting Orders with Order Analysis
    Please let me know if the knowledge base article does not contain the information that you are looking for.
    Thank You,
    Nick F.
    Applications Engineer

  • Is licence required for implementing JavaTv and JMF.

    Hi,,
    I am trying to develop GEM middleware for my STB,
    The STB has OS20 as RTOS and implemented on an ST chip
    This GEM is DVB MHP minus DVB.
    We have to implement JavaTV package and JMF for that,
    But do we have to pay any royalty to SUN for implementing the JavaTV or JMF packages or can we implement the binary versions of the packages.
    Please letme know how to implement the following packages
    org.havic.*
    org.davic.*
    javax.tv.*
    org.dvb.*
    and JMF?

    Hi Rohit,
    let me also add a few words. In principle the process Sales Order Processing B2B with ERP sales order in CRM Web Channel means that you setup (a) Web shop(s) that use and display the CRM product catalog but create orders directly in SAP ERP without first creating them in SAP CRM. It also allows to use certain E-Marketing features of CRM in the Web shop. The CRM product catalog in this process can only be used if you do use the TREX. There is no way of directly call up the catalog from CRM in the Web shop by bypassing the TREX.
    In the SAP E-Commerce for SAP ERP solution (ECO ERP) we in contrast offer the possibility to use the ERP catalog without the TREX. In this solution you can use the Memory Catalog which is not using the TREX. This solution by this way allows to directly use and display the ERP catalog and create orders directly in SAP ERP.
    For the CRM catalog in contrast we do not have something similar to the Memory Catalog. Instead you DO need to use the TREX to display the CRM catalog in the Web shop.
    The only option you have to "avoid" the TREX i a CRM web shop is what Easwar and Christoph have written about: The usage of an external catalog from a 3rd party catalog engine via the Open Catalog Interface (OCI) in the CRM Web shop. This we do offer for the CRM Web shop. However if you do not have an external catalog engine and want to use the CRM catalog then again you do need to use the TREX. It does not matter if you do not want to use product search nor prices other than fro ERP sales order.
    Greetings
    Torsten Kliesch

  • Baseline Date for Due Date Calculation required for S/L indicators

    Hello,
    Iu2019m facing the following problem
    Iu2019m trying to insert an invoice (using a customer master record) but the system blocks me because the field ZFBDT (Baseline Date for Due Date Calculation) is a Required entry.
    The strange thing is  that if I use a S/L indicators the field is mandatory, if not the date may be defaulted.
    I checked in OB41 but there are non differences between Special PK and normal PK.
    Any ideas?
    Thanks in advance
    Alberto

    Dear Alberto,
    the field "Due On (BSEG-ZFBDT)" cannot be controlled with field status.
    It is controlled by field attribute of screen painter (Tcd: SE51).  If
    you look at element attribute for "Due On" field, a flag for required
    entry is activated.  In this case, field status has no control over
    the field.
    As of release 3.1G, field BSEG-ZFBDT is hardcoded in most FI screens
    to be mandatory and cannot be influenced by any field status
    changes. This situation is only valid when posting with special G/L
    indicator (ie PK 29/39).
    SAP development team has determined that this is a critical field.  The
    reason behind this is that this special GL screen and the data entered
    here are very important to many other programs. This data affects
    liabilities and receivables where due date is necessary almost
    everytime. Thus, we changed this field in this screen in order to
    prevent problems in many other areas. The reason is explained further
    in note 95079.
    I hope this helps You.
    mauri

  • Is the "Data" License required for devices responding to IP SLA commands

    Hi,
    This question relates to the 15.X IOS Licensing scheme.
    We have a dedicated router that we use in the hub site for setting up IP SLA probes.
    Does anyone know if we need purchase the "Data" license for remote site device responding to the probes?
    From my point of view, I am thinking that that is not required.  Any confirmation of that will be appreciated.
    Cheers.

    IP SLA requires a license greater than IP BASE.  So you will need at least a DATA license to be able to create collectors.  In the future, you can use the IOS Feature Navigator to see what features are supported in what versions of IOS (and with what licenses).
    http://www.cisco.com/go/fn

  • Tables's data scrambled (randomized) for testing purposes

    Dear Oracle People,
    I need to scramble (randomize) the date for testing purposes
    How I can do that within Oracle
    Source:
    CODE          FIRST_NAME     LAST_NAME
    1          FN_1               LN_1
    2          FN_2               LN_2
    3          FN_3               LN_3
    Target after scrambling:
    CODE          FIRST_NAME     LAST_NAME
    1          FN_2               LN_3
    2          FN_3               LN_1
    3          FN_1               LN_2

    Source table: t1
    Target table: t2 (create table t2 as select * from t1)
    Something like this would do:
    DECLARE
    rc NUMBER;
    BEGIN
    SELECT COUNT (*) INTO rc FROM t1;
    FOR i IN (SELECT last_name FROM t1)
    LOOP
    UPDATE t2
    SET last_name = i.last_name
    WHERE code = ROUND (DBMS_RANDOM.VALUE (1, rc));
    END LOOP;
    END;

Maybe you are looking for