CHaRM-Is that possible to create multiple Transport Request in UC

HI Gurus,
Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
Schedule Manager: Monitor
Job Status: Processing completed, but with warnings
Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
Action to be checked: Ur.gent Correction: Create Transport Request
There is already an open request, XXXXXXXXXX, for this project
So only way I can do that I released the TR and able to create another TR.
May be wondering why I need to create another TR, why not create TASK and work on that.
But this is the requirement at our company.
I will appreciate the effort and time to provide me the solution of this.
Thanks
Ava

Hi Ragu,
That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
I navigate to Actions - Depending on Status, found the entry as
Trans. Type     StatProf         UserStatus     Seq     Action in SAP Change Manager
SDHF             SDHFHEAD   E0002            10       CREATE_HF
SDHF             SDHFHEAD   E0002            20       CREATE_REQ
SDHF             SDHFHEAD   E0002            30       SAVE_PARTNER
SDHF             SDHFHEAD   E0002            40       SET BO LINKS
Where SDHF - Ur.gent Correction
           E0002 - In Development
           CREATE_HF -        Create an Instance in SAP Change Manager
           CREATE_REQ -     Create Transport Request with Task
           SAVE_PARTNER - Save Partners in Respective Partner Roles
           SET BO LINKS -     Sets Links to Business Objects
I don't see any OPEN_TR.
Any other place need to make change.
Thanks
Ava

Similar Messages

  • ChaRM: Creating multiple transport requests

    Hi Team,
    I am working with Sol MA n Charm urgnt crction (SDHF). I am executing the action "Create Transport Request". The pop-up appears to create the tranpsport request. I have selected both workbench and customizing requests. The transport request got created successfuly in the ECC DEV system. Now i am trriggering the action "Create New transport request". The same pop-up appears. Now i am selecting, ustomizing requesting check box. The action is executed successfully. But the transport has been NOT created in satellite system. Why it so? Can't we have two opencustomizing requests for urgnt corction (SDHF)?
    Or any configuration required to enable this?
    Regards
    PSK

    You cannot have more than one open request for the urgnt correction.if u want to create new request , you should release the existing one You can always create tasks in the open TR.
    Regards,
    Sam

  • Unable to create multiple transport target groups in SLD

    We have multiple R/3 QA systems but just 1 XI QA system and we need to test interfaces with all R/3 QA client at the same time. My XI development team has asked to explore whether its possible to create multiple target systems.
    Currenlty R3_dev has R3_QA1 as target business system, we would like to add R3_QA2 as target system for R3_dev.
    There is a "add/change" option in Transport tab and there is a grid which seems to imply that multilple entries are possible.
    I have added R3_QA2 to the Group "Qa_Bus_Group" and was able to  replace
    R3_QA1  with R3_QA2 however I was unable to create multiple target systems.
    I was wondering if anyone ran into this issue and any suggestions are welcome. Thanks in advance.

    Hi Syed,
               You can create multiple target systems only for different business system groups.If all the business systems like R3_QA1,R3_QA2, R3_QA3 belong to the same business group "QA_BUS_GROUP" , then you can have only one among the three system as target.
               So R3_DEV  can have only one system as target either R3_QA1 Or R3_QA2 or R3_QA3 since they belong to the same business group "QA_BUS_GROUP".
                If there are three different business system groups then you can have 3 target systems that correspond to their respective business system groups ,in this case source business system can be assigned to the 3 target systems that belong to different business system groups .
               Since that is not the case with your scenario, you cannot create multiple target systems.
    Regards,
    Laawanya

  • Is It Possible to create multiple tab report in OBIEE 11g?

    Is It Possible to create multiple tab report in OBIEE 11g?

    Triple post even! Multiple tabs in a single OBIEE  &  https://forums.oracle.com/thread/2560266
    Stick to one post!

  • How to find multiple transport requests for one object

    Hi all,
    Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution.
    I need to develop a report ,   which will takes a single Task number as input and gets the Request number from table E070.
    Based on that Request Number i will fetch remaining Task numbers under it.
    Then for all the Tasks Numbers, i am fetching their  objects by using table E071.
    I need to list out  whether any of these objects are in multiple Transport Requests. Once i got all the Transport Request numbers i need to release the Request based on their Transport Request sequence.
    I tried the following FM's , but not able to get the solution.
    SVRS_DISPLAY_VERSION_LIST
    SVRS_GET_VERSION_DIRECTORY_46
    SVRS_GATHER_REQUEST_FRAGS
    Thanks..

    Hello
    I have tried with below code
    DATA list_tab TYPE TABLE OF abaplist.
    SUBMIT RSWBO040 USING SELECTION-SET 'TEST'
                    EXPORTING LIST TO MEMORY
                   AND RETURN.
    CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
         listobject = list_tab
       EXCEPTIONS
         not_found  = 1
         OTHERS           = 2.
    IF sy-subrc = 0.
       CALL FUNCTION 'WRITE_LIST'
         TABLES
           listobject = list_tab.
    ENDIF.
    break-point.
    Submitting the program(RSWBO040) of SE03 transaction a will result in 'CNTL_ERROR' dump.
    Please try some other options
    Thanks

  • Is it possible to have Multiple Spool requests in one batch job overview?

    Hi,
    While running one of my z program in back ground, there are two spools generated (one by write statement and one by OPEN_FORM statement and both the spools are available in SP01 Transaction), but when i see the job overview in transaction SM37, I only see one spool request (that of the last spool request). Can any body in the group please tell me is it possible to see multiple spool requests in the job overview of one Abap program and if yes, how?
    Thank you.
    Abinash

    Hi Jayanthi,
    Thank you for the link. But probably that discussion was also an unsolved one.
    Anyway, does any one in the group think that display of multiple spools per one step job is dependent on client / SAP Server setting? Because as evident from the chain of mails in the link provided by Jayanthi, some people say that they see multiple spool requests for one program in batch mode job overview (SM37)? If yes, can some body tell me the required configuration?

  • Error when creating a transport request

    I have developed a process with GP and now I want to export it by creating a transport request. When I choose my process in the gallery, I get the following messages:
    Process "House Connection Request" refers to deprecated version of Callable Object "CO_InputRequest"; deprecated versions cannot be exported
    Process "House Connection Request" refers to deprecated version of Action "Input House Connection Request"; deprecated versions cannot be exported
    Both the action and its CO exist, but I don't understand why they are deprecated as they are activated and working.
    So I deleted them from the process and created them new, but I still get the same error message from above.
    Any help is greatly appreciated.
    Regards,
    Aydin

    Hi Experts,
    we are currently facing the same issue, that some Guided Procedures processes can not be added to transports, always throwing the same error messages:
    Process "xxx" refers to depricated version of Callable Object "zzz"; deprecated versions cannot be exported
    Can someone tell us if this is a technical issue or has object xxx been created/modified in the wrong way?
    Any help is greatly appreciated.
    Thank you very much.
    Kind regards,
    Jan

  • Problem when creating a transport request

    Hello
    I copied productive BR3 to test BR1 system(it is a BW3.5 system). Test BR1 existed also before(only the main client was 003).
    Now main client is on both 001(I do not know if this matter). I replicated with transport controller and everything went fine.
    When I want to create a transport request I have problem "Extended transport contrl is not active . Cannot specify target client". when I wannt further explanation I get:
    "Extended transport control is not active: Cannot specify target client
    Msg.nr.TR067
    Diagnosis
    Extended transport control is not active. This means that you can only release transport requests for the following transport targets:
    Target group
    R/3 System without specifying a client
    Procedure
    Change the transport target of the request by removing the client (for example, "C11" instead of "C11.010").
    The simplest way of doing this is to use F4."
    When I use F4 for "Target" field I get "BR3.001" as only option. If I choose BR3.001 I get above message. If I use "BR3" I get "BR3 is not a consolidation target". For further explanation I get :
    "BR3 is not a consolidation target
    Msg.nr TK658
    Diagnosis
    Transport target BW3 is not configured as a consolidation target of this SAP System. If you do not stick to configured transport routes, you may cause inconsistencies between the SAP Systems in the system landscape.
    If you use extended transport control, you also need to specify a configured target client.
    If the configured consolidation target is a target group, you also need to specify the target group as the transport target, if the target group consists of a single target system, or a single target client.
    Procedure
    Choose a configured transport target, or change the transport route configuration in the Transport Management System.
    What to do?

    Hi Jan,
    Please check whether parameter CTC=1 has been set in Transport tool,If not set it.
    Also check whether your transport group is configured properly
    regards,
    Jai

  • Is it is possible to delete released transport requests...

    Hi Experts,
    I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
    Thanks & Regards,
    RAJ

    HI,
    Its not possible to delete the released transport request. You should have to follow transport procedure .
    T-code for Transport Connection- Check in SE09/se10 for creating requests.
    For collecting objects you have go Transport connection without missing the objects.
    SE03 for checking the Request objects.
    Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
    Thanks
    sudhakar.

  • Does RSA9 Create a transport request?

    Does RSA9 create a transport request to go from the development instance to QAS instance? I did this in development but cannot see it in a transport. Do I need to execute RSA9 in each instance?
    Thanks for your assistance.
    Den

    Bhanu:
    Thanks for the suggestion. While creating a transport and trying to add this object I found that this was assigned to a $temp project. Therefore no transport creation.
    I changed that to another project and was able to create the transport with this object added (R3TR DSAA APCO_MERGED ).
    Now one more question:
    Previously my datasources did get transported to our QAS instance but they are all under the NODESNOTCONNECTED Unassigned nodes.
    Can I now transport the Application Hierarchy to QAS and will this reassign the nodes? Or do I need to transport the Application Hierarrchy and re-transport the other datasources again?
    Basically, how do I fix this.
    Thanks for your very helpful information.
    Den

  • How to create locked Transport Request

    Hi All,
    I have a requirement where I want to create a transport request that cannot be released to any other system i.e, locked transport. I need this transport to create a package to put my works related to a local tool that I want to create in the development server. This is an internal tool and need not be released to any other system. Please help in creating this transport.
    Any help in this will be highly appreciated and rewarded.
    Thanks in advance.
    With Regards,
    Rocky

    Instead of creating some "locked transport request" you can create your developments, that you don't want to be transported, as "local objects" (package / development class: $TMP). You decide about this when the system asks you for the assignment to the development class (package).
    In this case the system will not put these objects to any transport request - they will stay on your development system.
    regards

  • Doubt in creating the transport request for "STANDARD TEXT""

    HI ALL,
    i used the standard text in scripts but i am getting the problem while creating the transport request for that,
    i am not able to create the transport request for that,if anybody knows plzlet me know,
    this is very urgent,
    thanks and regards,
    saikrishna.

    HI SURESH ,
    THANKS FOR UR IMMEDIATE REPLY ,
    i executed that report in that i have given
    Name of Correction : ZREPST
    Textkey-object:
    Text key name:
    Text key - ID: ST
    Text key - language :EN
    Here Textkey-object,Text key name
    wat i have to ,give after that ,can i execute that ,
    will it create the request.
    plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
    plz let me know immediately,
    thanks and regards,
    saikrishna.

  • How to create second transport request for same programe

    Hello ,
    I created workbench transport request. The changes are done and still in development system.
    Now I have to do another change on the same program that has to be in different transport request,
    but whenever I  change something, and activate it, the changes are saved in first transport. How I can
    create another transport request for the same program without releasing the first one.
    Thanks

    Ask your basis team to provide you with a "Transport of Copies" request.
    Once you get it, add your object in this request and transport. your object will be transported and the original request will not be released. Do note that the changes will still be saved in the original request but you can still transport your object without releasing the original request.
    Edited by: Priyank Jain on Aug 12, 2010 4:12 AM

  • The Function Modules that can assign a Package & transport request no...

    Dear All,
                   I am creating a Program that will automatically create  Data Elements & Domains in SAP & assign the same to a Package & Transport request No...Well I have been able to create & activate the data elements & domains using Standard SAP Function Modules, but I am looking for the Function Modules that can assign a Package & transport request no. to these data elements & domains....Can anyone tell how to achieve this requirement...

    Hi,
    may be you have to use a classified task, we used
    FORM tr_request_choice  CHANGING pv_trkorr TYPE trkorr.
      TYPE-POOLS:
        trwbo.
      DATA:
        ls_request                            TYPE trwbo_request_header.
      CALL FUNCTION 'TR_REQUEST_CHOICE'
        EXPORTING
    *   IV_SUPPRESS_DIALOG                    = ' '
    *   IV_REQUEST_TYPES                      =
    *   IV_CLI_DEP                            = ' '
    *   IV_REQUEST                            = ' '
    *   IT_E071                               =
    *   IT_E071K                              =
    *   IV_LOCK_OBJECTS                       = ' '
          iv_title                            = 'Choose request, Task will be found'
    *   IV_START_COLUMN                       = 3
    *   IV_START_ROW                          = 7
    *   IV_WITH_ERROR_LOG                     = 'X'
    *   IV_NO_OWNER_CHECK                     = ' '
        IMPORTING
          es_request                          = ls_request
        EXCEPTIONS
          invalid_request                     = 1
          invalid_request_type                = 2
          user_not_owner                      = 3
          no_objects_appended                 = 4
          enqueue_error                       = 5
          cancelled_by_user                   = 6
          recursive_call                      = 7
          OTHERS                              = 8
      IF sy-subrc                             = 0.
        SELECT trkorr
          INTO pv_trkorr UP TO 1 ROWS
          FROM e070
          WHERE trfunction = 'S'
            AND trstatus = 'D'
            AND as4user = sy-uname
            AND strkorr = ls_request-trkorr.
          EXIT.
        ENDSELECT."rkorr into pv_trkorr
      ENDIF.
    ENDFORM.                    " TR_REQUEST_CHOICE
    Regards,
    Clemens
    Edited by: Clemens Li on Dec 15, 2010 2:36 PM

  • How to create a transport request with query and only with its structure.

    HI guru,
                how to create a transport request with query and only with its structure.transport request should not  include any other query items like ( variables, conditions...etc)
    thanks in advance.
    venkata

    Hi,
    Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
    Regards,
    anil

Maybe you are looking for