ChaRM:Release of system GRS not be determin during Create Transport copies

Hi ,
I am facing following error during Create Transport of copies in ChaRM Maintances Cycie.So we couldn't able release the TR.
Error : Release of system GRS could not be determined
We already checked some threads, but we couldn't get solution.
Kindly help to fix issue.
Regards,
Karthik

Hello,
My suggestion is execute a charm check in your project to verify if there is some consistency error.
Please, check if there is a IMG project assigned.
This will require an IMG project to be assigned and the correct logical component added which will reflect the TMS configuration.
Best Regards,
Diego Fischer,

Similar Messages

SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

Hi Experts,
Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
2) If not, Why system did not prompted me for a transport?
3) Then How Can I attach my CDM/changes to a transport?
Thank you

I don't think we get a TR prompt when adding a view in BD64.
You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

System did not prompted me for any Transport,when i added IB param in WE20?

Hello
I have added 2 inbound parameters to existing Partner profile (type is 'LS') in WE20 transaction, but, system did not prompted me for any transport request!!
When i checked EDP21 table, my entires are saved in this table.
Why systme is did not prompted for TR? How to get them into a TR and get them into QA?
Thank you

Hi,
if you look in TABLE MAINTENANCE GENERATOR DIALOG for table EDP21, then you can see, there is setting
no, or user, recording routine
Regards,
Klaus

Error: "Transaction type could not be determined" during PO Creation fromSC

Hi all,
I'm working on SRM 5.5 with ECS.
During the creation of a PO I want to add a SC as an item of PO.
But when I chose the SC and click on the button Add to PO I recive the error:
Transaction type could not be determined
In the organizational unit I set the attribute BSA and DP_PROCT_TY.
there are other steps I have to do to join the transaction type of SC and PO?
rgs
enzo

Hi Enzo,
First check if the attribute BSA and DP_PROC_TY have the same value.
Then in the attribute value for BSA, change the source system for the document type to your SRM system.
Create a new PO and a shopping cart.
Try changing the PO by adding the shopping cart
Hopefully your problem may get resolved.
Thanks
Sanjeev

System is not blocking Customer at creating Sales order - Urgent

Hello all,
Our user has created a sales order for 1,040,000.00 PKR for advance payment- cheque payment term. There is not payment against customer in fbl5n but system is not blocking sales order.Customer credit limit is zero. Any idea that why this is happening??

hi,
we had a similar req we handled it using delivery level blocks and restricted the authorisation to remove the block to certain users. incase you are not doin this follow this path. imglog executionshippingdeliveries-define reasons. assign this block to the order. also you will ahve to put teh block in cust master too.
saurabh

Outbound delivery output not re-determined during goods issue?

Hi,
i'm currently in the process of testing an SAP upgrade from 4.6B to ECC 6.0, and have encountered the following problem: one of our outbound delivery output types (LD00) is supposed to print out at goods issue (which happens in VT02N, by the shipment).
In 4.6B, the output determination procedure correctly triggers at goods issue, however, in 6.0, it doesn't. Re-opening the delivery in VT02n causes the LD00 to be determined after all, but by then it's too late.
Does anyone have the slightest idea why the output determination isn't re-evalutated at goods issue?
regards
Rob

Hi,
Perhaps you are using an own VOFM subroutine to do filters if the output works or no. You create this subroutine with tcode VOFM, and after some steps you create an include in a report of SAP (SAPL). You can check if you are setting a VOFM in SM34/VVC_T683_XX_E1 for the output scheme. Sometimes is necesary to run this report to create and activate the report sapl, if no, when the abap call the subrutine, SAP doesn't find (perform * if found)
For VOFM there is a good document in google, format PDF, search it with the string inside vofm ext:pdf.
I hope this helps you
Regards,
Eduardo

System should not allow me to create a PO more than the Maximum quantity.

Gurus,
My requirement is as follows.
I have a material with Max quantity defined as 100.
Now I have a stock of 60 & Open PO of 20 so the system should allow me to create PO only for 20 Qty.
It should restrict me if the Quantity exceeds 20.
Also inform us where to maintain the Max stock quantity for the material.
pl suggest
SN

Hello Sanjay,
There is no way to maintain the Max stock quantity for the material.
However, for the first issue, I would like to tell you that while creating PO in Item detail tab there is a tab of delivery. Under this tab you can set the under delivery or over delivery(as per your requirement).
for example, if you set the overdelivery to 10% and you created the PO of 100 quantity then you have the flexibility of receiving upto 110 quantity which is 10% more of the actual quantity.
If your point is something different from what I explained then kindly re-elaborate your query.
Hope this helps...
Robin

SolMan Charm: wbch and customizing TR not always automatically released

Dear solman experts,
In Charm, when users save a status linked to the background action "release_all" in order to release their transport requests, the transports are not always released.
I know this could happen with ToC and also with TR (mostly for workbench), but this is happening to lots of customizing transports.
I tested it with some small configuration (like for instance a TR with roles in it), the release works fine.
So the configuration of solman seems ok.
Does anyone have already faced the same issue and has an idea on what to do in order to avoid this issue?
Thanks for your help,
Kr,
Alice

Hello Khalil,
In the maintenance cycle, the ongoing phase is "development with release" so it is ok.
Also, all tasks have already been released as one of the previous status/action triggered the creation of a ToC (and for that the check of all released tasks is performed). So we have like two testing cycle (a first one with ToC where all tasks are already released) and if it is ok you can then set a status which triggers the "release_all" action to release the orginial transport requests.
What is really strange is that in the tasklist, the release request activity is correctly launched but has an error " /TMWFLOW/TRANSPORT_N643" which says that :
- Diagnosis --> The request BRDK922172 has already been released (but it is not the case)
- System Response --> The system does not allow you to create a transport of copies. (but it is not the action concerned here "the activity on which I receive this error is "release_all""
- Procedure--> It is not usually necessary to create a transport of copies for a request that has already been released.Perhaps you entered an incorrect request, in which case you have to enter a different one.
I do not get what is this error message about. And what is really strange is that for some transport requests the release works and for other not (but more and more are not working)
Have you an idea?
Thanks a lot for your help,
Alice

SolMan ChaRM - System landscape not ready yet

Hi all,
We are configuring ChaRM for an implementation use, therefore all the systems are not set up yet.
Is it possible in SolMan to define logical component without "real" systems ?
We saw that in STMS it was possible to create virtual systems, but how do we link these virtual systems to SolMan ChaRM ?
Is it possible to define a virtual system landscape and to build and configure ChaRM scenario with this ?
Thanks a lot for all your help,
Regards.

Yes, it is possible to define a development system and virtual systems (Q- and P-System).
Via transaction SMSY you can describe the planned Q- and P-System at first as 'virtual'.
Create transport routes with transport buffers as you would do for existing systems.
Define the buffers as they should be named in future.
For experimental purposes we connected our IDES-System to our development SolMan system.
In this environment we could map such a ChaRM-configuration.
In the meantime we practiced it in our production SolMan system, too.
Best regards
Horst

Process type not determined during ISU - CRM Contract replication

Hello Experts,
Process type is not getting determined during the ISU -> CRM contract replication.I could see that all configs are in place.
Please could you suggest what could have impacted this.
Regards,
Ravi

Hi, Nikhil
Do you read this document?
service.sap.com
/utilities
SAP for Utilities - Product Information
Cookbooks&Guidelines
IS-U/CRM Contract Integration
Denis.

Delivery is invoiced fully so system should not allow to create 2nd invoic

hi Expert,
my issue is, once invoice is created for delivery.
system should not allow user to create
second invoice for same delivery number.
where to check the confiurtion to stop such
behaviour
waiting for your reply
thanks
Alicia

Hi Alicia
In the copy control from delivery to invoice - T code VTFL
you can maintain the copy routines. try maintaining routine
3-- which is delivery reatled header
4-- which is delivery related item
also at item level copy control you may add the check in billign quantites
this would stop formc reating another invocie
Hope this helps
Thanks
Akasha

System should not allow PO beyond Maximum price.

Gurus,
My requirement is as follows:
I have a material which has a Max Purchase price of 100.Now whenever I create a PO system should not allow me to create a PO beyond 100.
Pl suggest a way out
SN

Hi,
According your rquirement while creating PO , material price ( that should be a condition based) does not cross your price limits,
In PO we have number of conditions like
Gross price
Discounts
Surcharge
etc........so on
for each condition type we can give upper limit while maintaining Material-Vendor info record(vendor -material specific).for this combination only it's works.
Regards,
Venkat

Release of system DSM could not be determined

We have set up charm and created projects, corrections and transports.
all seems fine until we try to pass correction to test.
the transport is shown in the pop up box and we can select it.
but when we hit ok, it seems to hang for several minutes then fails.
the error in the task list shows "Release of system DSM could not be determined"
with DSM being the development system.
The transport routes are fine and the system check is clean.
Has anyone seen this before?
Please help,
Thank you!

Hi,
Please make sure that you have performed all the TMS activities in the DSM system. Also make sure that you are done with the following prerequisites...
>transport routes defined between the systems in the landscape
>extended transport control is activated
>quality assurance approval procedure is deactivated and "single transports" strategy activated.
>TMS Trusted Services are activated in the system where the TDC runs.
>Transport Domain link activated if multiple transport domains are used.
>RFC destinations generated to client 000 of all domain controllers
Further queries in Solution Manager are appreciated.
Thanks and Regards,
Damanaidu J

Release of system DW3 could not be determined

Good Day;
I seem to be a wee bit stuck.
I am able to create a transports + tasks for a change request. I then release the task using SE01 to release the task.
Using CRMD_ORDER I select the change request, select release transport from the drop down.
Then go to the task list. Click on the line "Release Transport request".
All 8 lines are green.
Last line I get the following error
Release of system DW3 could not be determined
Anyone have any ideas?
Regards
Don Newton

Re-posted this question by mistake
Don.

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

ChaRM:Release of system GRS not be determin during Create Transport copies

Similar Messages

Maybe you are looking for