ChaRM:Retrofit:TMS set-up

Hi team,
In STMS, How to set-up transport path for retrofit client? I have already set-up transport path for DEV, QA and PRD to activate standard ChaRM. Is the existing transport path to be modified to include retrofit client?
Note: I am working with ECC sandbox to test retrofit (within ECC sandbox system, i am creating four clients DEV,QA, PRD & RETROFIT)
Thank you
PSK

hi
chk this link
[http://help.sap.com/saphelp_smehp1/helpdata/en/a3/0aae435a1342e8a56998d83a797161/content.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/a3/0aae435a1342e8a56998d83a797161/content.htm]
jansi

Similar Messages

Using ChaRM Retrofit?

Greetings, Solution Manager experts.
My company is considering implementing an N + 1 ERP environment: 1 stream for maintenance, and 1 for project work.
At this time, I am trying to assess if ChaRM Retrofit is being widely used in the industry, and what benefits and problems companies have seen with it. From what I can tell, there is not much documentation available on this topic.
Are you using ChaRM Retrofit in an N + 1 SAP landscape?
If so, has your company see a benefit to using this product?
Can you offer any tips or watchouts to implementation?
Thanks in advance for your help.

Hi,
Here are the information i collected about his topic. (hard to find information about that) :
Prerequisites :
A retrofit system must exist in the Maintenance Project (role type : Post Processing system). It should be a development system of an other project, for exemple an implementation project.
The task list of the maintenance project will now have two new tasks :
--> general tasks --> Assign Post Processing system to development system
--> Track section --> Post Processing --> retrofit systems --> start retrofit
I wish i could give clues for further research
Regards

ChaRM:Retrofit system level

Hi Team,
I am implementing retrofit functionality in ChaRM. Currently i am using Sol Man EHP1 ST Level: SAPKITL433. I am working with ECC landscape (ECC 5.) to test retrofit functionality (DEV,QA,PRD & Retrofit). What is the software component level required in the ECC systems to implement retrofit?
Regards
PSK

According with note 1040612, you can use this function with the following SAP_BASIS releases.
     SAP_BASIS
          SAP Basis component
                                               710          - 710
                                               700          - 700
                                               610          - 640
                                               46A          - 46D
Check this note too
1066123

Cross System Object Lock with ChaRM Retrofit

Hi-
I need to know if there is the ability to have a cross system object lock while utiliziing Retrofit within ChaRM. For example I am working with an N, N1 landscape. When I release a transport request in N I need the object to be locked in the N, and N1 (after retrofit) landscapes.
Will this be supported with both Workbench and Customizing requests?

I dont believe this is possible at the moment. As you must be already aware, that SAP releases the locks from the objects as soon as the transport request is released from the Development System. Unless, this locking mechanism is extended to various systems first (DEV and QAS) and later to parallel landscapes (eg:- Project landscapes) it would be difficult to bring in this feature.
Rgds,
Abhijeet Bhagat

ChaRM: Retrofit

Hi Retrofit,
The new functioanlity "Retrofit" is available in Sol Man EHP1. What is retrofit functioanlity? How is the benefit of this functioanlity?
Your input will be very much appreciated
Thnaks
Kumar

Hi Khalil,
Request for your input to set up the logical component for retrofit functionality.
I am considering two possible ways to implement retrofit.
1. Create one logical component LC1 and the follwoing systems in the logical component:
LC1: SJ1:100 (System Role: DEV), SJ1:200 (System Role:QA), SJ1:300(System Role:PRD), SJ1:400 (System Role: Post Processing).
Note: Post Processing system is a retrofit system.
2. Create two logical componets like LC1 & LC2 with the folowing systems in the logical component
LC1: SJ1:100 (System Role: DEV), SJ1:200 (System Role:QA), SJ1:300(System Role:PRD), SJ1:400 (System Role: Post Processing).
LC2: SJI:400 (System Role: DEV), SJ1:200 (System Role:QA), SJ1:300(System Role:PRD).
Which option will be best to go for retrofit functionality.
Note: Post Processing system is a retrofit system. All the clients are within the same system.
Thanks for the input
Kumar

Not able to create a Task List for Charm Retrofit

Hi All,
we are trying to implement retrofit for our client. Created two projects one for implementation and one id maintenance and defined the system landscape for both.
I have checked the RFC connection for all the systems involved and all works fine. IMG projects are created successfully for both.
Problem comes when we are creating a maintanance cycle or task list after activating the change request management. We always get a logon screen after giving the name of task list and press ok. First we thought it could be the trusted RFC issue but trusted RFC for the current user is working fine.
Could anyone know what is the problem and if you faced the same issue pls share your experience what all did you try to rectify it.
Thanks
Tripti

Hi,
BC sets are active. I have already checked, it ended up in warning but its general we can avoid it. One thing which we found out was thi error when I am checking the application log for the project
System cancel RFC destination SM_GTDCLNT020_TMW, Call TMW_SET_PROJECT_SWITCHES: No authorization to change file /usr/sap/gttrans/a ctlog/GTDZP000XX.GTD
I don't understand what exactly is this error about but informed the authorization team regarding this.
Any idea?
Thanks,
Tripti

Charm Retrofit Test in SM 7.1

When in 'To be Tested' state, 'Confirm Successful Testing', it prompts the following warning message, and status remains in 'To be Tested state.
1) Status was reset by system
2) No import into test system has taken place
3) Transport request is not flagged for import into production
Please suggest the Correct note or Steps to solve this errors

Hi,
Can you tell us if your transport imported with error in QAS system?
If yes,then in SCMA you can click on 'Correct import(repair flag)' button. It will give you the list of transports that went in error for all (*) users in QAS or PRD systems. Then you can select the transports one by one and click 'error corrected' button.
After this you can try again to change the status of CD to 'Successfully Tested'.
If No,please check the job log of collector job SM:TMWFLOW_CMSSYSCOL and see if it is running fine.
The production import queue doesn't get updated with QAS transports due to failure of mentioned job,so when you are scheduling import job it may not be getting any transport to import.
Also, if you have 5 system landscape and you are moving the changes to QAS system of N+1 landscape, and because of ChaRM configuration, changes are not yet allowed to go in import queue of N landscape ,then we get such warnings.
Hope this helps.

Configure TMS in fresh installed Solution Manager system

Hi Expets,
I have fresh Installed Solution manager. Configure TMS and now want to configure solution manger so that I can monitor all our SAP system from Solution manager. How I configure our SAP system in solution manager?
Also would like to know after TMS implementation if we like to use ChaRM or CTS+ so what changes required in current TMS setting? Thanks in advance.

Hello,
No Deejoy, I provided you with how to resource to do the things you requested.
TMS is transport Management System.
If you want to manage transports with an enhanced product CTS+ I provided the configuration guide.
If you want to implement ChaRM, I pointed you to the Wiki.
If you want to inegrate CTS+ with ChaRM, I also provided you with resources.
And lastly, I directed you to RKT-SOLMAN which can help you configure any aspect of Solution Manager.
But I do not see where I said to manage TMS on Satellite systems you need to implement ChaRM.
Charm was only raised, because you raised it in your question.
You have all the resouces you require to address everything you raised.
This is what is provided in my earlier reply.
Regards,
Paul

Issues while assigning TMS e.t.c in Nakisa Succession Planning VSN3.0SP2

Hi,
In Nakisa Succession Planning VSN3.0SP2
First I clicked on My Org Units and selected the required My Org Units and when I tried to assign TMS (by entering position and depth and then clicked on the Icon ADD)in the right pane,after some time (after processing) the screen refreshes and goes back to Position Details screen in right pane but the left pane remains same (My Org Units). But when I click on the same selected My OrgUnits (in My Org Units) again in the left pane, the right pane goes back to Org Unit details where it shows the TMS which i assigned.
Like this it happens for all. Say when I go to My employees and work on it like Set as Successor same issue happens the right pane shows position details as before.But when I click on the left pane it shows the Successor set.
So whenever an action happens (like Assigning TMS, Set Successor, Assign to Job Family, Add Development Plan e.t.c) and after clicking on the ADD ICON, the right pane goes back to position details.So Everytime I have to refresh the screen by clicking the left pane whenever after finishing each action.
Is it due to time for processing each action (hardly it takes 30 sec to process like Assigning a TMS e.t.c).?
Regards,
Xavier.

Hi Xavier,
This sounds like an application bug, since it shouldn't do this. I know of a similar issue in OrgModeler SP2. Does this only occur in the Flex mode?
My recommendation would be to open an OSS message.
Best regards,
Luke

CHaRM - Target group and Virtual System

Hi,
Could anyone let me know if Virtual System and target groups could be used with CHaRM?
Current set up with three systems/clients works fine, however, for a new project with active STMS version with target group and virtual system, even the task list is unable to be created.
Can you please help?
Regards

Hi,
As far as i know, you can't use virtual system for ChaRM.
Regards,
Sanjai

Asa 5505 dsl / mtu based ssl problem

Hi everyone,
We moved our office to a different location (including our dsl conncetion). We also updated our asa from 8.0.3 to 8.0.4.
Since then, I'm having trouble opening the webportal from customers having a dedicated line.
I'm getting the certificate, can confirm it but the page won't load. When setting down the MTU size on the client everything works fine. Using a DSL or UMTS Line also works like a charm.
Ã®'ve set:
mtu inside 1500
mtu outside 1492
sysopt connection tcpmss 1452
crypto ipsec df-bit clear-df inside
crypto ipsec df-bit clear-df outside
i also attached an packet trace showing tcp checksum errors while loading the page.
Anybody has an idea?

Julian,
You are contributing to the issue with "sysopt connection tcpmss 1452"
Change it back to the default "1380" or lower - I suggest lower I use "1300"
And the commands
crypto ipsec df-bit clear-df inside
crypto ipsec df-bit clear-df outside
AFAIK they do not apply to the SSL connections

Gmail Notes syncing issue

i have iphone 4 working flawlessly syncing the notes from the ipad and gmail.
Now i got the ipad. i follow the same method of adding email accounts and add GMAIL on IMAP account and turn on ONLY NOTES.
Now i open the notes application and nothing is there.
I go to settings > Notes ... only show Font choices, no Default account.
What should i do? how can i add Gmail as my defualt notes account???

I am having a similar problem, so no, I do not have an answer for you.
My iPhone syncs email to my multiple GMail accounts, and also syncs notes through those same GMail accounts. It works and has worked like a charm. I set up my new iPad 2, with 4.3.3 preinstalled, and cannot get it to sync notes (except through USB back to my MacBook). I cannot even get it to display the "default account" selector area in Settings --> Notes (just the fonts).
The GMail accounts are the same ones the iPhone is accessing, and the setup is the same on the iDevice (accounts are set-up as Exchange accounts).
Any thoughts on fixing this?

Photostream duplicates on Aperture from two iOS devices

I recently have Mountain Lion and set up my iCloud account with Photostream. I have an iPhone4 and iPad2 already set up and it worked like a charm. now i set up Aperture with Photostream, it now starts to collect photostream from both devices and now i have 2 copies of each photo. Is there a way to just have one copy of the photo synched into aperture?
to make it clearer: what happened is, photos i've taken with my iphone are synched to my ipad via Photostream. so both photostreams have basically the same set of photos. Then when i synched into aperture, both of the photostream albums were synched there, now i have duplicate photos (waste of storage space)... Help!

Never mind. After another hour of reading 50 more entries, I found this, and it solved my issues.
rosencrantz
Re: iCal EVENTS DUPLICATE and can't delete them May 19, 2010 8:57 AM (in response to rockydog)
I had the same problem (running snow leopard 10.6.3 on Macbook Air). Events i created on non-shared, non-synced calendars could not be deleted or if they could they'd pop up again in seconds. And send me email reminders every 10 mins. VERY ANNOYING.
Tried many things but what finally worked for me is:
Open isync.
go to prefs.
uncheck "Enable syncing on this computer" (it may take a while for this to go from grey to black and let you uncheck it)
click "reset sync history"
go to ical. delete events.
click "reset sync history" again.
RESTART. This is the part that made the whole thing stick.
good luck
macbook air, Mac OS X (10.6.3)

Mail + Yahoo = NO GO anymore?

Hi there,
I have an odd problem. Since a couple of days Mail doesn`t sync with Yahoo anymore. It looks like, that Mail can't set this account online anymore. My iPhone doesn't have any problems at all. Funny thing though: I sync Mail (etc) via my MobileMe account!
Can somebody help, please!
Cheers
Jan

I don't know if you are referring to iphone or Osx
Here are Yahoo imap settings work like a charm
Yahoo
Incoming Setting
User Name:[email protected]
Password: Password of your yahoo mail
Incoming mail server: imap.n.mail.yahoo.com
Mailbox Name: Yahoo
Mailbox type: IMAP4
Security(Ports): Off
Port: Default
Outgoing Setting
Email Address:[email protected]
User Name:[email protected]
Password: Password of your yahoo mail
Outgoing mail server:smtp.mobile.mail.yahoo.com
Security(Ports): Off
Port:587
hope this works for you
Vince

How to achieve 100% width banner graphic atop page that handles user resolution changes

I have a banner that can be divided into three distinct pieces. I'd like to achieve the following distribution:
Left piece 60%, middle 20%, and right 20%
In HTML I'd just use a 100% width table and set cell widths to those percentages from left to right. How's this done in Flex?
I'm trying all manner of ConstraintColumn configurations but it appears I can only get two columns to work at say 60%-40%, and not three as listed above.
Is ConstraintColumn the right place to be looking here or is there some better approach?
Thanks

Works like a charm with horizontalGaps set to 0. Thanks much.

ChaRM:Retrofit:TMS set-up

Similar Messages

Maybe you are looking for