CHARM Roles in Satellite System

Hi,
Can anybody tell me  exactly on CHARM roles in Solman 7.0 EHP1.
I am totally confused which roles i have to assign to Change Manager, IT operator, Tester, Developer & Requester.
In Solman which roles I have to assign & in Satellite system R/3 which roles to assign.
Currently I have assigned following Roles in Solman.
Change Manager     
ZO_BC_SOCM_CHANGE_MANAGER
ZO_BC_CHANGEMAN_ADMIN
ZO_BC_CHANGEMAN_OPERATOR
ZO_BC_SOCM_CREATE
ZO_BC_SOCM_DISPLAY
ZO_BC_SOCM_PRODUCTION_MANAGER
ZO_BC_TRUSTED-RFC
IT Operator /Basis     
ZO_BC_SOCM_IT_OPERATOR
ZO_BC_TRANSPORT
ZO_BC_SOCM_ADMIN
ZO_BC_CM_SMAN_ADMINISTRATOR
ZO_BC_TRUSTED-RFC
Developer     
ZO_BC_SOCM_DEVELOPER
ZO_BC_CM_SMAN_DEVELOPER
ZO_BC_TRUSTED-RFC
Tester     
ZO_BC_SOCM_TESTER
ZO_BC_TRUSTED-RFC
Can anybody tell whether above assignment is correct.
In Satellite system which roles I need to assign.
Regards
PK
Edited by: PK on Jun 1, 2010 9:58 AM
Edited by: PK on Jun 1, 2010 9:59 AM

Roles required for developer, tester and chagne manager in Solution manager in solution manager are as follow.
Developer
SAP_CM_DEVELOPER_COMP(composite role)
     SAP_CM_SMAN_DEVELOPER
     SAP_SOCM_DEVELOPER
SAP_SOCM_REQUESTER
tester
SAP_S_RFCACL (for RFC)
SAP_CM_TESTER_COMP(composite role)
     SAP_CM_SMAN_TESTER
     SAP_SOCM_TESTER
change manager
SAP_CM_ADMINISTRATOR_COMP (composite role)
     SAP_CM_SMAN_ADMINISTRATOR
     SAP_CPR_PROJECT_ADMINISTRATOR
     SAP_CPR_USER
     SAP_SOCM_ADMIN
SAP_CM_CHANGE_MANAGER_COMP (composite role)
     SAP_CM_SMAN_CHANGE_MANAGER
     SAP_SOCM_CHANGE_MANAGER
But you have to assign some object authorization to these standard roles.
mainly you have to provide authorization for these objects S_TCODE, B_USERSTAT, S_OC_ROLE, CRM_ORD_OP etc.
You can assign sap_all, sap_new to your user(developer, tester, change manager etc) and can set a trace from st01 on that perticaular user and then try to execute anything which you want. Then you can check for the objects in the trace and can authorize user for those object.
Regards,

Similar Messages

  • Roles in satellite system for message creator

    while creating support message in satellite syatem, i am getting the following error.
    Error in Local Message System: No authorization to logon as trusted system (Trust Message was Not Created
    Message no. BCOS088
    what role i have to give it to the message creator @ satellite system

    Hi.
    Looks like you are using a trusted connection (maintained in table BCOS_CUST) to connect your satellite system to the Solution Manager.
    If you keep this configuration every user who tries to create a support message in your satellite system also needs a real user in the Solution Manager (including authorization objects S_RFC and S_RFC_ACL).
    Instead you should use the SM_<your sol man>_BACK destination and set NO_USER_CHECK=X in Tx: DNO_CUST04 (SolMan).
    Also you should create a Business Partner in SolMan (for each user who should be able to create a support message in satellite system) with external ID referring to the satellite system user.
    You do not need a user in SolMan for everyone who should be able to create a support message from satellite system.
    Hope this helps.
    /cheers

  • Create single-roles in satellite-system

    Hello everybody,
    I want to create Single-role´s in a satellite-system over RFC but the Fm´s in the Functiongroup PRGN are not remotable. Is there an alternative way to create these single-roles in a satellite-system? Up-/download and transport function isn't a alternative because my requirement is to create the single-roles an from excel-import. I considered that one way could be to copy the roles in the satellite.
    Regards,
    Christian

    You can create an RFC-able FM that is a wrapper for that FM.
    Neal

  • Charm Prerequisites for satellite systems

    What versions of sap needs to be installed on the satellite system in order to work with solution manger charm.
    For example can charm be made to work with a SAP 4.6C system?
    Where is this documented? I did a search and can not find it anywhere.
    Easy points.
    Cheers

    Hi Avrohom Weissman 
    Sorry i forgot mention it, in the right hand side, look for the Configuration Guide SAP Solution Manager as of SP15 (based on your SP level of Solman) which will give all the prerequisites of the respective scenarios of Solution Manager.
    For Charm refer the page number 10.
    Regards
    Naveen
    Edited by: Naveen kumar Palanichamy on Jan 29, 2009 5:53 AM

  • Roles required to create support message from satellite system

    Hi Team,
    I am trying to create support message from satellite system. i have assigned S_RFC and S_RFCACL to the Zrole. Apart from that, is there any other roles to be assined in satelite system to create support message?
    Regards
    Kumar

    I think that's it.
    Of course they roles in the central system too: SAP_SV_FDB_NOTIF_BC_ADMIN and SAP_SUPPDESK_CREATE (or copies thereof).
    Regards,
    Sean

  • Cannot find role SAP_SDCCN_ALL in satellite system

    Hi,
       I cannot find the role SAP_SDCCN_ALL in satellite system. The sattelite system is R3 4.7 PI 2003_1_470, PI_Basis 2003_1_620. Did anyone of you encounter the same problem?.
    Regards
    Anil

    Hi Anil,
    the role SAP_SDCCN_ALL is shipped with ST-PI 2005_1_*.
    In this ST-PI release the new transaction SDCCN is shipped first time. This transaction replaces the old SDCC. So it is quite clear that in the ST-PI 2003__ the role is not available.
    So please upgrade your ST-PI and you will get the new SDCCN.
    This SDCCN has the following new features and functions. You can send data to more then one Solution Manager.
    If you have installed the new ST-PI and you are generating then RFCs (the SM_*_BACK), the tool automatically assigns this destination to the SDCCN, so then automatically the SDCCN would ask the new SolMan for new sessions.
    Also one big advantage of the new SDCCN is, if one download is required by more then one service, this download will not be collected multiple times (reduces system load), it is collected only ones. By default a new download will be collected after 3 or 6 days, this is customizing of the SDCCN.
    So I recommend to upgrade your ST-PI
    Regards,
    uDo

  • Direct creation of transports in satellite system after CHARM

    Hi All,
    I have a quick question:
    Can we create new transport requests into satellite system directly, when CHARM is enabled for them. Or the transports can only be created through CHARM?
    Appreciate your response..
    Regards,
    Smita

    Hi
    It seems you have a problem in understanding the flow
    go thru the foll demo files..it will explain you the whole process and ur doubt
    Regular corr
    https://websmp201.sap-ag.de/~sapidb/011000358700000872582009E/index.htm
    Urg corr
    https://websmp201.sap-ag.de/~sapidb/011000358700000872612009E/index.htm
    Hope prb is solved now
    Regards
    Prakhar

  • Mass transport strategy but satellite system is configured for ChaRM

    We want that all transports are automatically transported in the development test client.
    We have calling a job with program TMS_BCI_START_SERVICE in the satellite system. But this program can only be used for mass transports and does not work when single transports strategy is activated.
    Question:
    Is there no solution to transport all this transports automatically in development test client via mass transport strategy if satellite system is configured for ChaRM scenario?
    Thanks a lot in advance.
    Regards Urs

    Hello Michele,
    Please, check the point 5 in the link below:
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    I think that this information can help you.
    Best Regards,
    Diego Fischer

  • CHARM:   Logon restriction to satellite system

    Hi
    With CHARM functinality, users are allowed to logon satellite system via Solman only when logon action is approved.  This is great control, but how can we prevent users from loging directly to satellite system?  
    In short,  I would like to accomplish this
    User > SAPGUI　> Satellite (i.e ECC)    Not possible
    User --> SAPGUI --> Solman --> Satellite   Possible when approved in Solman
    I tested this with changing user type in SU01 (dialog, communication, system, service...), but none of them solved my problem.
    Maybe,  I should post this question in BASIS forum, but though this was common problem in CHARM envirnment.   Thanks in advance.
    Regards

    Hi, Xavier
    Thank you for your reply.   End users will continue to log on satellite system.  No change for them.
    What I meant is that I want to control developers / testers' logon activities.
    They can logon DEV / QA servers only when approved by Solman.
    Problem is that their users need to exist in satellite system, and they can still directly log on to DEV / QA.　This is why I want to accomplish such a functionality.   I wonder if any configuration solve this.
    Regards
    Koji

  • Solution Manager ChaRM Issues when Upgrading Satellite System

    When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
    Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
    1. Normal Correction (In Development)     Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
    2. Landscape is changed to                    Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
    3. Normal Correction moved to To Be Tested -> Consolidated -> Production
    Will the Normal Correction be in error because the landscape changed for the iBASE?
    Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
    Thank You,
    Carlen
    Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
    Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

    Thanks Subhashini!
    We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
    Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
    Thanks again!
    Carlen

  • ChaRM - Change Request where to raise? Is it in Satellite  system or Solman

    Hi Friends,
    For creating the change request( TCode: charm_create) is it necessary to login to solman & then raise CR ?
    Is is possible to raise Change Request in satellite systems ?
    If I have done development configuraion in BI & Now I want to move it to QA. What is the process steps for the same?
    Many Thanks
    Praveen K

    hi
    Change Request  have to raised in Solman. You might be aware all change requests will be connected to a maintenace project / Implementation project in Solman.
    In that project, your satellite system landscape have to be maintained.
    refer the below help doc for the process flow
    [http://help.sap.com/saphelp_smehp1/helpdata/en/2b/614e1cb8204f35b477eac703073589/content.htm]
    Suppose for doing a configuration change  in your BI system, you have a raise a CR in Solman and choose the appropriate maintenance cycle of BI landscape and continue process. Refer the solman rkt   documents also.
    regards
    Naveen

  • CSOL Cross System Object Lock - RFC error in satellite system

    Hi
    We are currently implementing Solution Manager 7.1 (ChaRM) and of the mandatory requirements is to activate Cross System Object Lock.
    I have globally activated this in Solman and have gone into /TMWFLOW/CMSCONF to activate for our development client. This is now activated.
    A transport has now been created in ChaRM and I login to the above mentioned development system and make a customizing change. I then choose the transport and save change. I am presented with an error:
    "Error in RFC SM_DSMCLNT001_BACK to Solution Manager System" (Message No. STMWFLOW025)
    I have now been looking at this for a few hours and found OSS Note 824521. However, I have already done all this. From a RFC perspective we have:
    SOLMAN:
    SM_DSMCLNT001_BACK - works fine in SM59. The assigned user has all the correct profiles.
    In transaction SDCCN, the above RFC appears also.
    In transaction SM30, table BCOS_CUST, "CHARM_DEST" and "OSS_MSG" are both set to destination NONE.
    SATELLITE SYSTEM:
    In transaction SDCCN, the above mentioned RFC exists
    In transaction SM30, table BCOS_CUST, "CHARM_DEST" and "OSS_MSG" are both set to the above mentioned RFC
    The user SMB_DSM for the RFC only exists in Solman and not in satellite system. Don't think this is needed though.
    As soon as I deactivate CSOL in /TMWFLOW/CMSCONF in Solman (for development client), I can make changes and the above error (in red) does not appear. However, we needed CSOL working and this error not to appear.
    Any suggestions???
    Thanks
    Shaun

    Ok, the resolution was to ensure SMB_X82 (in Solman) has the following roles and profiles:
    Roles
    SAP_SOLMANTMWCOL
    Z_SOLMAN_BACK
    Profiles
    D_SOLMAN_RFC
    S_BDLSM_READ
    S_CSMREG
    S_CUS_CMP
    S_SD_CREATE
    S_TMW_ADMIN
    This resolved my issue.
    Thanks
    Shaun

  • Error while creating a support message in satellite system

    Hi,
    I am facing an error while sending a support message to solman form the satellite system
    (( Error Description :  Error in Local Message System: Error when opening
    an RFC connection Message was Not Created ))
    1) I gone through various threads and set the required authorizations like
    SAP_SUPPDESK_CREATE and
    SAP_SV_FDB_NOTIF_BC_ADMIN ,
    SAP_SUPPDESK_ADMIN
    for the user in the solman .
    2) I checked the RFC connection and it is working fine.
    Anyone pls help me to resolve this issue

    hi rohit,
    thanks for u r immmediate response
    do i have to assign the roles to the user in the satellite system or the solman.
    some roles in those 4 roles are not in the satellite system.
    thanks
    Rahul

  • SOLMAN EHP1 - anyone can create support message in Satellite System's Help?

    Hi,
    I just curios that why everyone can create support message in satellite system-> help -> create support message?
    I tested with restricted profile user and without role SAP_SUPPDESK_CREATE, NO BP created but he still manage to create support message???? Any idea??
    Also, same goes to any user can process ticket in SOLMAN with no BP-Employee role and SAP_SUPPDESK_* roles assigned.
    Your kind input is very much appreciated.
    Thanks,
    Nicholas Chang

    Hi Nicholas
    If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
    The user entered in the RFC details probably has the authorization to create Support desk messages.
    Regards
    Amit

  • Create support message in satellite system

    Hi,
    What are the pre-requisites to configure  creating support message in satellite system.
    Thanks
    Rajesh

    Hi,
    Follow this blog u can set up ur service desk
    mainly it comprises of roles table entry and rfc destination in satellite systems
    /people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    hope it solves ur problem
    Regards
    Prakhar

Maybe you are looking for