CHARM : Sequence of transport request to import

Hi,
I'm configuring CHARM and found out below issue.
Scenario.
1) Charm project with project type implementation was created in SOLMAN. The type of change is normal correction. All transport request was created under 1 task plan. The transport was created based on configuration and some of the transport request have dependency to others transport request.
For example.
a)GL account need to be created in FI and was assigned to TR002.
b) MM need to configure the GL account that was created in a) and was assign to TR001
Issue
When the TR was release, how do we ensure that the sequence of import to QAS client and PRD client must follow the dependency of the TR created?
Appreciate your input.
regards,
Biah

Hi Sir,
I am working in SAP Solution Manager. I would like to know some concepts regarding CHaRM:
Currently our project is using Transoport Proposal. We will soon shift using CHaRM. But I am not aware of the Technical concepts.
1. How to configure CHaRM with the Tranport Proposal Flow.
2. How to navigate in CHaRM? (screenshots can help).
3. I am aware of the process but still after creating a CHaRM how do the Developer navigate to do a change in DEV system.
will he go through CHaRM. (please explain me).
4. Also explain me the total process from technical point of view till the CHaRM closure.
5. I am aware of SOLMAN in this process where the Charm requests are collected and monitored.
Hope I will get a good guidance from your end....

Similar Messages

Need TP command for Add Transport Request to import Queue all at a time

Hi SAP gurus,
Can you tell the o/s or TP command to Add   Transport Request to import Queue all at a time which are available in co files directory   ,
Because I have to add 500- 600 request . For every request I canu2019t do like this STMS_IMPORT -- Extras=> other requests -add--
Thanks and regards
babu

Hi,
You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
The syntax will become as follows:
column1           column2         column3
tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import          DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
-> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
-> Then rename this .txt file to *.bat.
-> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
Regards,
Bhavik G. Shroff

What checkbox "import again" when adding an transport request to import que

Hello
I wander what checkbox "import again" when adding an transport request to import queue means?
Thank you in advance

Hello Jan,
Well you should have searched in help.sap.com before posting here for basic concepts. Anyways, import again means after successful import also you can reimport that particular request.. Please see the below link for other options as well.
http://help.sap.com/saphelp_nw04/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/content.htm
Thanks,
Siva Kumar

CHaRM-Handling old transport request before CHARM was activated.

Hi All,
Recently i just activated CHARM in solman-SM1 for new a project implementation. This CHARM was setup in in such a way that it tie to one of the local IMG project EPROJ in developmemnt-DEV. Now i have one concern and that is those transport requests where created before i activated CHARM.
These old transport requests were crerated directly in DEV without project assigned. Therefore, we tried to assign IMG project EPROJ (the same IMG project setup in CHARM) into those old transport request manually.
Problem : When i tried to perform released step in CHARM tasklist it says that "No transport request found"
Question : How do i make CHARM to pickup those old transport requests?
Really appreciate your feedback as there are a lots of old transport request which needed.
Thank you.

Hi,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions ,,,,the system does not take into account transport requests that you added manually.
This note is what you want
Note 1150426 - Registering transport requests in ChaRM
Hope it solve ur problem completely.
Regards
Prakhar

ChaRM: Creating multiple transport requests

Hi Team,
I am working with Sol MA n Charm urgnt crction (SDHF). I am executing the action "Create Transport Request". The pop-up appears to create the tranpsport request. I have selected both workbench and customizing requests. The transport request got created successfuly in the ECC DEV system. Now i am trriggering the action "Create New transport request". The same pop-up appears. Now i am selecting, ustomizing requesting check box. The action is executed successfully. But the transport has been NOT created in satellite system. Why it so? Can't we have two opencustomizing requests for urgnt corction (SDHF)?
Or any configuration required to enable this?
Regards
PSK

You cannot have more than one open request for the urgnt correction.if u want to create new request , you should release the existing one You can always create tasks in the open TR.
Regards,
Sam

ChaRM: link between ChaRM message and Transport Request

We use the action 'Release Transport Requests' in the task list of the
Maintenance Cycle to release all assigned Transport Requests. In the
pop-up window that appears we see all Transport Request numbers and the
transport description.
Is there a possibility to add an extra column in this pop-up screen, to
see the link between the Correction number and the Transport Request?

I agree on this one.
However, a naming convention for OSS notes and FRICE is implemented over here.
That's why it would be useful to have an additional column.
The link is somewhere in SAP, because when you go to the tab Project Structure in TA /TMWFLOW/PROJ for the selected Maintenance Cycle, you see which Transport Requests are assigned to which ChaRM msg.
Roel

Whats the diff between copying a Transport request and Importing a request?

Hi gurus,
Can some one explain me the difference between copying a transport request between clients and importing transport request between clients? say for eg: difference between copying a transport request containing a datasource being copied from client 100 to client 200 and importing the same request from client 100 to client 200?... When do we follow such scenario's?
thanks.
kishore

Hi Kishore,
A request copy applies only for customizing (client dependent) objects.
A request tracks object modifications since its last transport. if the object is created in source system and included in a transport request, when it is transported to another system, it will create the object in target system. Then if you modify the object, it will include modifications since last transport.
As i said, a request copy is only valid for customizing objects. This is entries in tables, you will see that you have two kind of requests, customizing and workbench. Workbench objects are client independent, so request copy doesn't applies.
it's very important to keep the order of requests when you transport and also not to delete requests in any system.
Hope this helps (and hope it is clear, if you have any doubt, just ask!).
Regards,
Diego

CHaRM-Action "Create Transport Request" is cancelled

Hi All,
when i click on the action "Create Transport Request" and save the change document the following error is displayed
"Action Create Transport Request in system SM2 200 of type Source Systems has been cancelled"
where SM2 200 is our Dev Client in the same Solution manager.
i did add the SAP ROLE "SAP_S_RFCACL" to the user in both the client and gave full authorization
but it did not help.
Regards,
Pradeep L

hi Pradeep,
i am doing ChaRM configuration in our Solman system and also new to this.
i need help for "Create Transport Request" from CRM action....
Is it possible to create TP request from CRM action??
if yes please guide me how to do it?
Expecting ur reply...
Regards,
Selvakumar RV

Transport Request Management(Import log)

gurus,
i had one serious problem,i had configured tms sucessfully and their is no any inconsistence in tms,DEV,QAS,PRD AND EXTRA SYSTEM AS SMD,When i import the request in QAS and PRD it is showing log,but when i import the request in SMD request is importing and it is show the object,but is not (Showing)displaying log.
plz help me regarding this,points will be awarded.plz......
Message was edited by:
Naresh M

go though it
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm</a>
regards
shiba dutta

ChaRM. Release Transport Request

Hello colleagues!
I need your advice about background user for releasing of requests. I've found information in help that request may be released by [bg.user|http://help.sap.com/saphelp_sm32/helpdata/en/35/613542e454b104e10000000a1550b0/content.htm]. And I suppose that the connection SM_SIDCLNT200_TMW can provide this functionality for user SMTMSSD (determined in this RFC). But during try to release requests in SCMA under CH_MANAGER (context->Schedule) I get error "Processing completed, but has errors", as a result request is not released. I've also found that system even doen't want to use bg.user, but tries to release request via CH_MANAGER. The trace file (ST01) showed me only CH_MANAGER actions during release request. Where can be the problem? Is it normal that system tries to release request not under bg.user?
REM: One-system landscape (CHARM client - 001, DEV client - 200, TST client - 230, PRD client - 250)
REM: similar topic is [here|ChaRM: Release tasks;
Regards,
Artem Ivashkin

Hi,
What is the logs in SCMA?
what is the user CH_MANAGER ? Here might be CH_MANAGER te one who is using the SCMA tcode, And regarding the roles and users and their working please review the guide
[Charm|http://forums.sdn.sap.com/servlet/JiveServlet/download/156-301304-2964635-163/user_guide_change_request_management_320_SP08.pdf]
On page number 8. now comes to your error, Please understand tat You can not rlease the task in solman, so please ensure all your tasks in the TR get relased from the corresponding satellite system.
Thanks,
Jansi

How to resolve problem for transport request which imported 'z' tcode

Hi Expert,
I have requirement from HSBC for Advance Payment Extraction. In this case they donu2019t have source code in text file so that they gave us request number which we imported in IDES. Now bu2019coz of this u2018Zu2019 Tcode created automatically and whatever the u2018 Zu2019 Programs are available also created. But when I will run this tcode and came back that time runtime error is coming I am send you the screen shot and all u2018zu2019 programs are in display mode which I want to be in change mode that is also not possible. Please guide me to proceed.

Rahul,
You will require to Change the Maintenance system for the Object.
Follow below steps:
1) Go to Transaction SE03
2) Select the option "Object Directory" -> "Change Object Directory Entries of Objects in a Request"
3) Put the details for Package, person Responsible and original system of the Object
Change the system and save the entry. This activity will not generate the TR.
Hope this helps!
Regards
Shital

Issue in Transport Request of ChaRM

I have created a Transport Request made import'd to Q-Sys, Now i need to Make some changes I've set the status to IN-dev & made changes & saved ,also released the transport request, still no changes found, Plz suggest me a remedy?

hello Savithru,
the normal process to import in QSystem your change via charm is to run the action "test transport" when you are "in development" for normal change document (SDMJ). You need to release your task prior to this action.
This action will create a copy of your intial transport and will release it to the import buffer of your Q system. (the initial transport is NOT released). You can see the transport number in your log in your change document.
The actual import in Q needs to be scheduled manually or automatically
Do you see your transport of copy in the import buffer of your Q-System ?
I hope it helps
br Xavier

Unable to release Transport request in CHARM

Hi all,
After Setting up CHARM,created a Transport request,while releasing it thru CHARM gives error:"Release of system Q11 Could not be determined"
rgds,
rajesh
Message was edited by: rajesh
Rajesh M

Dear Rajesh,
1.Did you released the Task of the request in satellite system?
2.What error you get when you check inside the task list of that correction.
Please give inputs,which will help us in solving the issue faster.
Thanks and Regards,
Avinash.

Not able to import transport request in A66

Hi Expert,
I have done an amendment via t.code OBR3 in N66 so created a transport request. I went to SE01 to release the transport request and I saw the status is released and the is a warning message "Import steps not specific to transport request". I logged on to A66 and go to STMS_IMPORT but I could not find my transport request to import it into A66. Did I missed out anything? Have I done anything wrong?
Kindly advise.. thanks

hi
sometime it happens recreate the transport request and try to re-import it may work.

Importing a transport request

Hi Expert,
In our Transport landscape some one has released a transport for QA system but the request is not reflecting in Import Queue of QA system.
Can some one advise how to import the request in QA.
Thanks
Kundan

Hi,
There might be some problems at OS level of Dev/Qua system and check the Co and Datafiles. Now execute Tcode STMS_IMPORT in Qua system. and goto following location from menu bar:
Extras-> Other Requests -> Add
Now give the Transport Request No. and Target Client.
This will add the Transport request into Import Queue of Qua system, now u can import the request.
Hope this will solve your query.
Regards
Lokendra

CHARM : Sequence of transport request to import

Similar Messages

Maybe you are looking for