CHaRM - Target group and Virtual System

Hi,
Could anyone let me know if Virtual System and target groups could be used with CHaRM?
Current set up with three systems/clients works fine, however, for a new project with active STMS version with target group and virtual system, even the task list is unable to be created.
Can you please help?
Regards

Hi,
As far as i know, you can't use virtual system for ChaRM.
Regards,
Sanjai

Similar Messages

  • CRM Target Groups and Product Segments - BW and BPS settings

    Hi gurus,
    I have some questions regarding the CRM Target Groups and Product Segments as it relates to BW and BPS planning layouts.
    1. When a target group is created in CRM, is it supposed to also be create master data entry for the object 0TGGRP_ID in BW? If it is, what kind of settings need to be made to ensure that? When we create target groups in our CRM instance, we donu2019t see the master data being updated for the  0TGGRP_ID info object.
    2. Where exactly (in BW) is the relationship between the target group and the underlying customer/business partners  stored/updated? We have a requirement to use target groups for defining the trade promotions and still being able to explode and plan on (individual) customers in the embedded BPS Planning layout. I believe that we need to have target group and associated customer assignments stored somewhere (?) in BW and use BPS characteristic relationships to populate all the possible combinations for a target group ID being passed from CRM. Am I correct in my assumptions? Any ideas if SAP has already delivered something similar in the BPS business content for TPM? 
    3. We are planning to use product segments to define the trade promotions as well. I believe BW info object is 0CP_SEGMENT. Similar to what I mentioned in Question 1, I donu2019t see any master data being updated for 0CP_SEGMENT. Am I looking at a wrong BW object or missing some key settings?    
    4. Where is the relationship between a Product Segment and the associated products stored/updated in BW?  How do I create a trade promotion using a product segment and make the BPS planning layout populate individual products in the lead column?
    Thank you for your help

    Hi Anna,
    After reading your post, what i understand is that there is no existing relationship present in CRM system between the Org BP and the contact person BP.
    As per my Knowledge in order to create a Target group with Contact Persons you should have an active relationship persent in the CRM system bewteen the BP and the Contact person.Now as your sceanrio suggests that the Contact person's are present in the BW system but not in CRM, i would assume that the relationship also exsits in the BW . So if it does then your BW team should be able to help you in creating the necessary infocube with there analytical tools and you can then use there cube as the datasource and create the necessary Target Group with Contact persons.
    Comming to the second part of your question, your guess is absolutely right but to give you more detailed infomation , the BP ID is converted in a unique GUID and this is passed into the program to retrive the necessary information from the BP after the campaign is executed.
    Hope this helps!!
    Regards,
    Naveen

  • Business Service , Service Group  and Provider System for CE 7.2

    Hi
    I need documentation about Business Service , Service Group  and Provider System for CE 7.2.
    Att,
    Marco

    Did you get one? I need too.
    In SAP Help Portal there are a large quantity of documents, such as:
    http://help.sap.com/saphelp_nwce72/helpdata/en/88/a552908d4c44dc99b3ec247069921e/frameset.htm
    But the content is so much and I do not know with which part I should start.
    In the web blog of Ms. Stefanie Bacher:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d70a19-45a3-2b10-bba0-807d819daf46?quicklink=index&overridelayout=true
    she has mentioned how to create a service group shortly. But I cannot follow it in my NWDS CE7.1.
    Anyone could give me some tipps, how to resolve authorization problem of consuming web services.
    Thanks and regards
    Rene

  • Target groups and marketting compaigns

    Hello all,
    I am seeking for information about target groups and campaigns,
    Where target group ID and compaign ID are stored?
    Where can I find function modules that returns all bp's belongs to target group, and all target groups belongs to campaing?
    All help wil be appriciated,
    Rika

    Hi Rika,
       You will find campaign detials in table CGPL_TASK. Use function module CRM_MKTTG_TG_READ to get all bp's belong to target group.
    Thanks
    Swagatika

  • Target group in CRM System

    Hi
    We have a Target group in CRM with Status modelling completed .If we change the customer data related to this Target group in ECC system,will this Target group get updated automatically .
    Regards
    Vipul

    Hi,
    Modelling completed means you can not add or delete any Business partners in that particular Target group.  It should be updating the changes made in Customer master in ECC if all your middleware settings for delta upload are correct.
    Rgds
    Mallikarjun

  • Transport target group and routes setting for 2 system landscape

    Hi!
    I have 2 system landscape (DEV with 2 Clients, 100 CUST and 200 TEST and PRD with productvie client 100).
    Currently I have the standard TMS configuration for 2 systems (with tranport layers/routes ZDEV and SAP) .
    Now I  have to set up my TMS settings client specific
    (Development in DEV 100 and transport to the DE 200 TEST and PRD 100).
    I have created tranport target group /B-DEV/ with both target goals:
    DEV 200 and PRD 100.
    <b>What are the further settings for transport routes?
    I assume, I have to delete the existing routes ZDEV and SAP?
    what are the next steps? </b>
    Thank you very much
    regards

    Ok, I have in DEV system:
    Client 100 (Customizing)
    Client 200 (Test) (it can be considered as replacement of QAS-system, because we only have 2 systems)
    PRD system
    Client 100 (Productive client)
    So we would like to set up the transport management system client specific, in order to develop in DEV 100 to test in DEV 200 and to use the transports in PRD 100.
    Thank you very for your help
    regards

  • How & Where to create the Target Groups and Transport Targets for Business

    Hi Experts,
               I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
    Thanks & Regards
    suk4023
    Edited by: sukande on Aug 17, 2010 8:18 AM

    Hi Supriya,
               Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server.  Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.?  Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
    *Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
    Pls clarify on this ......
    Thanks & Regards
    suk4023

  • RT Target Resources and Distributed System Manager

    Hello all,
    Does anyone know of some potential reasons why an RT target might not publish its CPU and memory usage?  This particular target is a cFP-2200 running a complete installation of FieldPoint 6.0.2 (RT 8.6) including System State Publisher.  For some reason I can't view the memory usage on this target and I haven't been able to figure it out.
    Thanks in advance,
    Jim

    Hello Hillman,
    Thanks for your reply!  I sort of
    figured that this one would go by the wayside and not be answered. 
    Actually, I'm not using RTSM; I'm using the Distributed System Manager
    - It's a relatively new tool that ships with LabVIEW RT 8.6.  In my
    humble opinion, I find it to be much superior to the RT System Manager
    in its own way.  The only downside, really, is that you can't log with
    it natively, but there are ways around that.
    You've
    got some great suggestions.  I definitely was using the correct IP, I
    could target it with LabVIEW because I loaded my application on there,
    and I didn't get any boot errors when I connected.  You're absolutely
    right, too, that the CPU is always maxed out at 100%.
    I
    guess I was perplexed because, one moment I could see the resources in
    DSM (is that acronym valid yet?), and after I reloaded the software
    from scratch, I could see lots of variables on the target, but for some
    reason the system resources weren't showing up.  After no one jumped on
    the question, I went back to tweaking various settings and realized
    that I hadn't rebooted after enabling VI Server.  In fact, I didn't
    think that VI Server would be the issue and hadn't really thought of
    checking there.  My reasoning followed that, if all of the other
    variables showed up, surely it wouldn't be VI Server, but that fixed it.
    I definitely appreciate your getting back to me, though.
    Cheers,
     Jim

  • Segmentation and Target groups

    Hi,
    Is there a way to create sub-sets of Target Groups so that whenever users run a campaign, the system does not have to go back todatabase tables to filter data, but it is done in sub-sests only to enhance system performance.
    Regards,
    Monica

    Hi Pooja,
    which version of the product do you use? CRM 2007?
    Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
    => You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
    => Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
    Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
    => Just create the target group for the complete profile set, then one consolidated target group is created.
    Does this help?
    Regards, Guido.

  • Campaigns and Target Groups

    I'm trying to extract information about target groups and related campaigns to BW from CRM. I was initally looking at 0CRM_TGBPCT but this was extracting only one record and I found an associated OSS note (No 717539) to it recommending the use of another datasource called 0CRM_CONTACT_OUT. I tried using this datasource but when I test it even in CRM (RSA3) it says 0 records. I know data is in there though.
    Would someone be able to shed some light on this and be able to give me any tips on the same.
    Thanks !!!!

    Hi to all,
    I've the same problem when load data with datasource 0CRM_TGBPCT.
    If I extract from RSA3 retrive the correct data but if I extract directly from BW the system load only 1 record!!!
    please anyone help me?
    P.S.: The remote user for the connection have already SAPALL authorization!

  • Transport Groups: One Technical System targets two technical systems

    Hi guys,
    One question relating to transport groups.
    Is it possible to define for one technical system which belongs to one group, let's say DEV, two target Business Systems which belong to another group, let's say PRD?
    Meaning,
    Technical System XPTO targets:
       Group PRD   Tech System: XPTO2
       Group PRD   Tech System: XPTO3
    Thanks

    Hi VJ,
    Sorry, wrong word...I meant Tech System to 2 Tech Systems.
    Having DEV System targeted to QLD and PRD tech system which are on the same group.
    DEV Tech System targets to group
    Group PRD  : QLD Tech System
    Group PRD  : PRD Tech System

  • Transport Layers and Target Groups

    Hello,
    Can one transport layer be assigned to two different target groups?  We have some number range changes that are automatically trying to go to our FIX_QAX target group since it is config, however, the transport cannot be generated because the config is part of package KEG0 which is set up currently as part of the SAP layer which only handles the FIX_IND target group.  I was thinking of making the SAP layer go to both target groups FIX_QAX & FIX_IND.  Is there any danger of this?
    Thank you for your time,
    Erin Byrne

    i think we can't assing a transport layer to 2 different target groups. and, even connection b/n 2 target groups is not possible. i am not sure, if we can use the same transport layer (SAP) twice.
    the alternative way is.. manually (copy the data file and cofile in the other tranport domain) import the request.
    hope this info helps.
    regards,
    Rajesh.
    <i>pls, award points</i>

  • Combine Profiles and Target Groups -Segmentation

    Hi Experts,
    I have a requirement where I will need to join profiles with other profiles and Target groups. I checked in help.sap and I saw the following sentence regarding combining the profiles.
    In addition to attributes, you can also combine profiles with other profiles and with target groups.
    Example
    You select a profile from the components area, drag it onto an existing profile in the staging area and choose keep. The resulting profile contains the attributes contained in both profiles as inclusive conditions.
    How do I get the Profiles and the Target groups in the Components area? I can only view the existing Attribute lists. Is there any setting that I have to make to see the existing profiles and target groups ?
    Any help will be greatly appreciated.

    Hi Pooja,
    which version of the product do you use? CRM 2007?
    Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
    => You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
    => Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
    Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
    => Just create the target group for the complete profile set, then one consolidated target group is created.
    Does this help?
    Regards, Guido.

  • Campaign automation  recurring and refresh target group

    Hi,
    i'm working with CRM 5.0 and i work for the first time with target group and recurring campaign.
    I need to create birthdate campaign to send greetengs to bp that match birthdate, but i dont' know how refresh target group Bp every day.
    Someone could help me? thank in advance.

    Hi,
    Plz surf through following links
    http://help.sap.com/saphelp_crm40/helpdata/en/d2/1d13bd5cd34040a2f03b622d121a43/frameset.htm
    http://help.sap.com/saphelp_crm40/helpdata/en/b3/0b343e2dffb92ee10000000a114084/frameset.htm
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Creating Target group

    HI all,
    I am trying to create the target group in Segment builder, for which I have done the following settings
    1)I have maintained Attributes and attribute set,
    2)i have assigned attribute set to Business partner.
    3)I also have created Data source here i have maintained
    Origin type as attribute set
    maintained name of attribute set
    function module used Cross-selling: function module CRM_MKTPR_PP_CS_TG_READ,and description.
    4)Created attribute list as follows
    Description_______
    Category:Product proposal
    Segment type:Product Proposal and saved.
    Then assigned data source and highleted what ever attributes required to display in Segment builder.
    The issue here is:
    When i go to Segment builder(crmd_mktseg):
    in Segment builder when i tried to create profile set for product proposal the system is asking for Profile set description and Master group.
    and i am unable to drag and drop profile set onto staging area and create target group.
    can u/any one advice me in this regard/
    Thanks in advance.
    mdv.

    Hi mdv,
    For the purpose of creating your target group, the name of the profile set is of no importance. CRM just requires that you do create the target group within a profile set. That being said, when you create a profile set and system asks you for profile set description and master group, just put any words in the description field that is meaningful to you, and don't select anything in the master group.
    Once this is done, you will need to drag and drop your 'filter' that you created for your attribute list into the staging area. Then, one very important step (which I missed in the beginning and it took me 8 hours to figure out) is that you need to click on the 'Count' button. Once you see a number on the target group, it means the filter is working. From there you can create your target group and open it for list export.
    Hope this helps.
    Leon

Maybe you are looking for