ChaRM transport not getting created
Hi Experts,
I am in SP20 EHP1. I am configuring ChRm flow. I have made the copy of SDHF to ZSHF. I have completed all the configurations. I have made the copy of all the actions & statuses.
I am having two actions in ZSHF while creating the transport requests as below.
Option 1: Click the standard action "Set in Development". (copy of standard action). At that time the transport is getting created successfully.
Option 2: Click the action "Create New Transport request" (Copy of standard action). At that time the transport is NOT getting created. Why i couldn't able create the transport using this copied action? In the transaction data tab ---> Actions tab, the details says that action "Processing HF_EXECUTE_ACTION Is Started" & @5C\QError@ Action could not be successfully executed
Note:
But if i use the standard transaction type SDHF, at that time using both standard actions, i could able to create transports.
Need your valuable input
Hi,
Please check for the configurational table for which you are facing problem, its delivery class should be "C" under delivery & maintenance.
You can get it checked by your ABAP team.
hope this will help.
Regards,
AK
Similar Messages
-
Transport not getting created for certain SPRO settings in Golden client
Hi,
Currently we are in the realization phase of the project ,we are in the process of configuring system in golden client.
For some SPRO configurations ,the system is not prompting for the Transport request.
Kindly let me know if anybody had gone through similar kind of issue.
Regards,
mmuser
Edited by: mm Keyuser on Dec 30, 2009 5:34 AMHi,
Please check for the configurational table for which you are facing problem, its delivery class should be "C" under delivery & maintenance.
You can get it checked by your ABAP team.
hope this will help.
Regards,
AK -
Transport Request Not getting created automatically
Dear Sir,
We are facing a problem related to , Transport Request not getting created automatically during the SPRO change activities . We have to manually create the Transport Request and then changes need to be included in the request individually on the manual basis .
However earlier , we had no such problem and Transport Request were getting created perfactly .
We request you to kindly help us on this issue pl .
Rgds
Sonia AgarwalHi Sonia,
This is purely because of the client settings. Your client settings are in such a way that the cghanges are not getting captured. As mentioned by Naveed, check to see the client settings and change the settings if needed.
FYI: The SandBox clients will have the client settings as in ur system now.
Regards,
Varadharajan M -
Hi,
I have build a workflow based on "QMSM" at event "COMPLETED". I have done the event linkage correctly and transported the customizing request in the client I want to test it in.
The workflow has been activated without error. Itu2019s working when I test it from development environment, that is, from workflow builder.
When I create a notification and complete the task, the event "COMPLETED" is getting triggered of "QMSM" object. In the event trace I could find out the green indicator against the event which means the workflow was recognized by event manager.
But there is no workitem getting created. Could you please help me finding out the problem behind it?
Why is workitem not getting created?
Event Trace result is:
Event Instance ID 577459
Object Type QMSM
Object Key 0003000046080003
Event COMPLETED
Receiver type WS99900010
Receiver FM SWW_WI_CREATE_VIA_EVENT_IBF
RFC Destination WORKFLOW_LOCAL_201The problem is workflow is not getting triggered.
I had triggered the WF manually by executing the FM SWW_WI_CREATE_VIA_EVENT_IBF (from se 37 directly) which resulted in work item (WF instance) created. The WF error issue (Exception on ZFM) has been removed.
The process that i follow:
(1) I create a notification and add a task & complete the task. <--- This does not trigger WF (and this my problem)
(2) Event trace gives the things in GREEN. I double click the event trace record.
(3) I get the necessary parameters from event trace corresponding to the event (COMPLETED) of object type QMSM and execute the FM SWW_WI_CREATE_VIA_EVENT_IBF. This result in creation of a work item (triggering of work flow), In other word - A instance of WF is created that we can call the work item.
My problem is -> even after correct event linkage, why is workflow not getting triggered?
Could you please point out what would be going wrong? -
Need help: Distribution demand is not getting created when Iu2019m using Purch
Friends,
When Iu2019m running the heurisitic plan distribution demand is not getting created. Iu2019m working on SCM 5.1
I have a transportation lane which are automatically created using the Purchase inforecords. Iu2019m not
facing any issues tranfering this purchase info records (PIR). Iu2019m able to see this as transportation lanes
in APO. When I run the heuristic plan run purchase requsition are getting created but distribution
demand is not getting created. I have tested the same scenario by manually creating transportation
lanes. The manually created transportation lanes are generating distribution demand but purchase info
record transportaton lanes are not generating the distribution demand. What may the cause? I would really appreciate for
your input in advance.
Regards
KRNFriend,
I have maintained the means of transport to the tranportation lane
Regards
KRN -
Excise invoice should not get created without PGI
Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T SaravananDear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi -
Invoice is not getting created in Order related billing
Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi -
File not getting created in a different server
My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
VishTry to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
RFC_DESTINATION =
* FILE_MASK = ' '
* LOCAL_DIRECTORY = ' '
* REMOTE_DIRECTORY = ' '
* OVERWRITE_MODE = ' '
* TEXT_MODE = ' '
* TRANSMISSION_MONITOR = 'X'
* RECORDS_PER_TRANSFER = 10
* MONITOR_TITLE =
* MONITOR_TEXT1 =
* MONITOR_TEXT2 =
* PROGRESS_TEXT =
* IMPORTING
* LOCAL_DIRECTORY =
* REMOTE_DIRECTORY =
* LOCAL_SYSTEM_INFO =
* REMOTE_SYSTEM_INFO =
* TABLES
* FILE_LIST =
* EXCEPTIONS
* CONNECTION_FAILED = 1
* INVALID_VERSION = 2
* INVALID_ARGUMENTS = 3
* GET_DIR_LIST_FAILED = 4
* FILE_TRANSFER_FAILED = 5
* STOPPED_BY_USER = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF. -
Weblogic Domain not getting created in SOA Suite 11g R2
I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
BP not getting created while creating employee
Hi,
When I Hire an employee a BP should be created for it. It used to happen earlier in the system but after we moved to another system this is not working. Can someone please let me know the necessary config for this?
I've the following settings:
HRALX ONUMB = 2
HRALX OSUBG = MD
The MD number range is from 90000000 to 9999999999. Should this number range be internal or external?
When I use the HR_SYNC_PERSON report for an employee I get the error as
"Determination of connections to object 'BP' of 'CP' '50000201' failed"
"Object of type 'US' with ID '1122' does not exist or is inconsistent"
"Determination of connections to object 'BP' of 'O' '50000101' failed" etc
Also I need to upload the employee master data using LSMW and BP does not get created with LSMW also? Is there some specific config while using LSMW?
Please help.Whenever you are uploading employees using LSMW, you need to run program HR_SYNC_PERSON.
Pls refer to the following thread for further info:
Assignment: Business partner for person '50000029' is not unique
Regards,
Dilek -
AUC Asset not getting created when Internal Order is created
Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
SanjaiHi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai -
Accounting doucment not get created for Credit Memo
Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advanceHi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit -
SRM PR is not getting created in ECC backend
Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumaryes, i could see a PR number with all this additional details as below.
Table BBP_PDBEI
CLIENT 453 Client
GUID 4CAEFA58EB9D005CE1008000AC1C2031 Globally Unique identifier
BE_LOG_SYSTEM QA1400 Logical System of Logistics Backend
BE_OBJ_ITEM Follow-On Object Item in Back-End System
BE_OBJECT_TYPE BUS2105 Follow-On Document Object Type in Back-End System
BE_OBJECT_ID 2000000167 Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE Reference Object Type in Back-End System
BE_REFOBJ Reference Object in Back-End System
BE_REFOBJ_ITEM Reference Object Item in Back-End System
BE_REFOBJ_SBITM Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2 Reference Object Type in Back-End System
BE_REFOBJ2 Reference Object in Back-End System
BE_REFOBJ_ITEM2 Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2 0000 Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC Storage location
BE_PLANT 2016 Plant
BE_BATCH Batch Number
BE_VAL_TYPE Valuation type
BE_MOVE_REAS 0000 Reason for Movement
BE_EXPERYDATE 00000000 Shelf Life Expiration Date
BE_PUR_GROUP 206 Purchasing group
BE_PUR_ORG 2000 Purchasing organization
BE_CO_CODE 2000 Company Code
BE_DOC_TYPE CLRQ Purchase Requisition Document Type
BE_ACCREQUIRED Account Assignment for Logical Backend Required
BE_SP_STK_IND Key for Special Stock Section
BE_INFO_REC Number of purchasing info record
BE_MOVE_TYPE 201 Movement type (inventory management)
BE_PACKNO 0000000000 Package number
BE_INTROW 0000000000 Internal line number for limits
BE_ITEM_TEXT Short Text of a Service Purchase Order Item
BE_PO_PRICE 1 Price from Backend
BE_UNLOAD_PT 200 Unloading Point in Backend
BE_DEL_IND Deletion Indicator in Backend Documents
BE_TRACKING_NO Requirement Tracking Number
BE_COND_TYPE Condition Key
BE_COND_STEP 000 Level Number
BE_COND_COUNTER 00 Condition counter -
WBS Elements not getting created in ECC Project System from CRM 7.0
Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1. Set up the RFC connections between the two systems
2. Selected the connection type as Middleware in CRM system.
3. Installed the cProject Add on in CRM box.
4. Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5. The Project Scenario in PS config has the same name as the Project Type in CRM config.
6. Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya ShrivastavaHello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor. -
Attachment not getting created in PI from CRM
Hi Everyone,
I am trying to create attachments in PI from CRM but it is not getting created there. I am executing the following steps:
By default I am getting the attachment data in Binary format so I am using this function module to convert it into XSTRING format.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = lv_input_length
first_line = lv_first_line
last_line = lv_last_line
IMPORTING
buffer = lv_xbuffer
TABLES
binary_tab = file_content_binary.
2. Then I am getting the server context and the protocol.
obj_server_context = cl_proxy_access=>get_server_context( ).
obj_attch_protocol ?= obj_server_context->get_protocol( if_wsprotocol=>attachments ).
* Assign File naame to STRING Variable
lv_name = lv_filename.
* Attach file to the service response.
obj_attachment = obj_attch_protocol->get_attachment_from_binary(
data = lv_xbuffer
type = if_ai_attachment=>c_mimetype_pdf
name = lv_name ).
APPEND obj_attachment TO t_prx_attach.
obj_attch_protocol->set_attachments( t_prx_attach ).
3. Then I am using a proxy class which has Input and Output structures for sending data to PI and getting the response respectively. And then in the end I am calling the proxy and passing the structures.
With this I am unable to see the attachmenmts in sxmb_moni transaction. Please help.Hi Gurus,
Can you please help with some pointers on this.
I have used below links as reference for coding.
Link 1 :
http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
Link 2:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/10/19/abap-proxy-protocols-use-cases-and-examples
After setting attachment(Method SET_ATTACHMENTS) i am not getting any exceptions,but still i am not able to see any attachment created in SXMB_MONI.
Thanks in Advance,
Manil.
Maybe you are looking for
-
ive tried putting in different cards & info it still shows the same message! when i try to edit my billing/payment info there is no option to click 'none' or paypal. ive tried doing this on my ipad, laptop, & android. im getting very frustrated its b
-
Iphoto not working after updating to Maverick
iPhoto says it cannot work with this operating system npw that I have installed Maverick. What do I do?
-
ORACLE 11g win64 installation on Windows 7
Hello, Could anyone help me in knowing whether the ORACLE 11G win64 is the right version to install on Windows 7?
-
I deleted all my information from my old skype account (can't delete the account completely) but my "full name" and "location" still come up when I search to check it.
-
RoboHelp 9 Training for ACE preparation
I am trying to find a RoboHelp 9 training class to take as I prepare for certification exam but so far all I've found are three-day courses across the country for over a thousand dollars. There do not seem to be any more affordable options, at least