ChaRM: transports to several production systems possible?

Hello,
we are facing following situation and do not know how ChaRM is handling this system landscape:
1 DEV system
1 QAS system
3 PRD systems (regional)
As the IBase Component has to be one PRD system, how can this be done, that all 3 PRD systems will be delivered at the same time?
Thanks in advance!

Hi John,
Refer to below URL, will provide more information.
https://websmp110.sap-ag.de/~sapidb/011000358700002931432006E.sim
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/29884 [original link is broken] [original link is broken] [original link is broken]
https://websmp201.sap-ag.de/~sapidb/011000358700000872582009E/index.htm
https://websmp201.sap-ag.de/~sapidb/011000358700000872612009E/index.htm
http://service.sap.com/~sapidb/011000358700000293582009E.PDF
Cheers
Deepanshu

Similar Messages

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Error message while transporting SapScript to productive system

Hi,
I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
The error message is displayed like this:
R3TRFORMZMEDRUCKN was repaired in this system
Message no. TW 104
Diagnosis
Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
System Response
The object is not imported.
Procedure
If you still want to import the object, release the relevant repair andrepeat the import.
Does anybody know something about that problem?
Cheers

Hi,
maybe somebody has already create your form in the productive system. Now you would like to create something already created.
Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD. (in the DEV)
Rgd
Frédric
Message was edited by: Frédéric Girod

Error while transporting ADDRESS to production system

Hi all,
We are in the process of a new rollout and we have created new plants and company codes. the same have been transported to quality and pre-production systems without any issues. however when we transport the same to Production, we face an error
The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
The object
R3TR TDAT ADDRESS_4.6*
has not yet been imported into client 100 without error.
the objects are getting transported with same address number as in development which in production points to a different address.
as far as i know the system should generate a new address number and assign it to the object during transport.
Any suggestion wud be great

the log is
 Post-import methods for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Post-import method AFTER_IMP_CUST_ADDRESS started for ADDRESS_4.6 T, date and time: 20090714144548
 Post-processing taking place in client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 Post-import method AFTER_IMP_CUST_ADDRESS completed for ADDRESS_4.6 T, date and time: 20090714144548
 Post-import methods of change/transport request MEDK909182 completed
 Start of subsequent processing ... 20090714144547
 End of subsequent processing... 20090714144548
 Execute reports for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Reports for change/transport request MEDK909182 have been executed
 Start of................ 20090714144548
 End of.................. 20090714144548
 Execution of programs after import (XPRA)
 End date and time : 20090714144548
 Ended with return code: ===> 8 <===
regards,
Tarun
Edited by: Tarun Bahal on Jul 16, 2009 9:41 PM

Help needed on movement of transports between two production systems

Hi All,
Our client is implementing SAP in US and Europe and it has separate production systems for both. It already went live in US and now started SAP implementation for Europe. They wanted to leverage the development & configuration done for US in Europe implementation and have taken the copy of US development box and started building on that. For Europe, they identified few changes to the existing custom objects from US, few objects from US which are not required and also brand new objects. Going forward, they also decided to import all the defect fixes and changes from US into Europe system on a regular basis(monthly).
If anybody has experience in an environment like above, please let us know the pros and cons with the approach highlighted above.

Differentiate thru trasports requests and move the correspoding cofiles and Data files in required system and import as suggested earlier.
Thanks

Output Difference in different Production system. Urgent

Hello All,
In the development system we have screen exit in QM02/QM01 with two block b1 and b2.
This is transported to several production systems.
Now the problem is :
In some systems it is working good. But in few only one block is displayed.
Please help.
Thanks,
Kunal

Check for linkages. Is the binding activated betwwen workflow to task container.
Check whether values appear in task container or not.
Then check for binding between task & method container. Is there any event linked with the task. Is the event linkage is activated.
The problem might be resolved if all the linkages are correct.

ChaRM scenario for only one productive system

Hi CHaRM-experts!
I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
Does ChaRM support such case?
Thank you very much!
regards
Thom

Hi Don,
thank you very much for your answer.
No, I do not plan any transport in the productive system.
I would just make any adminstrative changes without transport.
Does ChaRM support such scenarios?
Thank you!
regards
Thom

Transporting role menu and workbook created diurectly in production system

Hi gurus,
We have several workbooks (and queries) that are created directly in production system. thoose workbooks are connected to a role that is created in development system and transported to production system.
Now, we would like modify this role in development then tranport it on production system, but we are afraid that will be wiped out (overwrite) our production system workbooks (because the role not contains this workbook in development).
Could you please explain to us what we have to do in order to not wiped out our production workbooks.
Thank you in advance

thank you, it's more clear for me...
Exactly, to have all my requests and workbook in development, I tried to use "Transport order of copy (it means transport queries from Production system to development system)", then to connect them with the corresponding roles in development, but I have the think that BW considers them as new requests when I re-transport them again on the prod.)
Could you say me if i can transport my production system queries on my development system, and manage them in this system (development) in the future.
Thank you in advance

Issue whilel transporting from production system to quality system

Hi All,
    I am facing issue in process chain when I transport it from production system to quality system. Process chain is related to deleting PSA logs. When transported to quality system object_type and object_name fields in display variant becomes blank. In production system it is showing 8ZXXX_CA, it should become 8ZXXX_HA in quality system.
   Thanks for your help.
Regards,
Shankar

Hi,
    sorry it was frm dev system to quality system, not prod to quality.
Regards,
Shankar

Transaction LS10 - mass creation of WM storage bins - in Production system

Hi,
Does someone know, if it is possible to make the Transaction LS10 open in a production environment where the customizing is
blocked for changes.
In the reality the users need to have this Transaction for Creating new bins in massive way. Up to now it is job of the IT and then
release the change request to production. But also the generation of the new bins is only in production system possible, when
it is open for a short term to create the new bins.
thanks for you help in advance
Michael

Thanks for your question. I know LS05.
I (and the users) want especially use LS10 and create also in Production mew sequences and structures.
do you know a possibility for this?
thanks

Creation of new Plant in productive system

Dear All,
I have to create 3 new plants. the system is already productive from the last one year.
can anybody guide what will be the effects if i create new plants and send the transport to the production system.
what need to be looked for side effects if any?
pl give your valuable suggestions.
Thanks and regards
Ajay

If you create new plants - there is no adverse effect but you have to make sure that the plant you create is copying by the existing.
other things if you have any custom reports based on the plant then the new plant should be included, authorization needs to be consider if any basd on the plant,
etc

Proxy generation Problem in Production system

Hi Experts,
I have consumed WSDL file and created Client Proxy in development system.which is working fine
After testing it is Transported to the Quality system and Production system both.
In Quality system Proxy is generated properly and functioning properly.
But in Production system, Proxy is not generated and even in Tcode SE80 it is not displaying.
How to solve this problem?
Please suggest.
Thanks in advance.
Regards
Jagesh

Hello Experts,
After Transporting Request to Production systems, all Dictionary objects are also created but Only Proxy is not created(Not appearing in SE80 under the respective package name).
Please help me in this.
Regards
Jagesh

Could not Locate Workbook in Production system ?

Hi ,
Can any one explain me the procedure to transport workbook from Dev to Prod.
I have recently transported some queries and workbook . Transportation went fine , I am able to see the queries in Production system . But i failed to locate all my workbooks in Production system . I have searched for the work books with Workbook ID and with description but it is of no use. I can see my transported work book in Meta data Repository.
Your help is appreciated .
Thanks in Advance

Hi Rob,
i am a bit clear now.
I have 30 workbooks in production system , they are not in dev , I mean 30 workbooks are directly created and assigned in production system.
Now i have created 10 new workbooks in development. My devlopment system has only 10 new workbooks.
as per my understanding from your reply is ' If i transport the role i can only have 10 newly created workbooks in production and loose 30 workbooks . Which i don't want .
i want these 10 workbooks to transport in to production system without effecting existing 30 workbooks in production system

ChaRM - Mainenance Cycle in two system landscape - possible?

Hi Experts,
we are trying to create a maintenace cycle with two systems.
We have a system defined as "Evaluation System" and the second is defined as "Production System".
Generally Question
Is it possible to create a maintenace cycle for a two-system-scenario?
Specific Question - Erorrs/Warnings
While checking the project we got several errors/problems:
1 Differences between BC Set SOLMAN40_CHARM_BASICFUNC_001 and database
2 Differences between BC Set SOLMAN40_SDESK_BASICFUNC_000 and database
3 No consolidation system found for EID-800 (project Z_CRM_T)
4 No track for project Z_CRM_T with log. system EID/800
5 Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for CBI-001
CTS
The transport system is configured correct - Check in STMS is OK
Question:
The comparison checks seem to be OK - is it necessary to reactivate the BC Sets?
Kind regards
Tom

Hi,
the system role for your client/systems in the logical component is very important:
- The development system needs to be defined as a Source System.
- If you don't have a QA, leave all target systems empty. If there are one or more consolidation/integration/regression systems, assign them to system role Target System.
- Your production system uses system role Production System.
The defined Development client needs a client dependent (TMS parameter CTC=1) consolidation track to the QA, or in a 2 Tier landscape to the production system. In a 3 Tier landscape you need a delivery track from QAS client to your production client. But as you wrote, TMS has been set up already. I just would like to mention all steps....
Check that all RFC connections have been set up correctly. Especially the Trusted RFC. Don't forget the Trusted RFC to client 000 ot the TMs domain controller.
In tab Systems ( transaction code SOLAR_PROJECT_ADMIN => System Landscape ):
Make sure you see all clients of your logical component. If not hit button System Role Assignment and add your System role.
Then still in the same tab: Hit button Shipment Routes and make sure, you see the complete transport track and only this track here!
After correct setup of TMS, RFCs, logical components and assignment of LC to your project:
First perform a Refresh and a Check in transaction code SOLAR_PROJECT_ADMIN => System Landscape => Change Requests. Then please recreate the maintenance cycle (and task list).
Regards,
Holger

ChaRM transport route, one development, 2 QA, 2 PRD system landscape

Hello,
We have a customer who has an ERP system with a transport route which is the following:
One single Development system which feeds, 2 QA systems and then 2 PRD systems.
We are to implement ChaRM and we want to customize the tickets so that every time you execute the import action of a transport request into QA (and later into PRD) both systems QA1 and QA2 are updated and later on with PR1 and PR2.
We would like to know how to support this scenario in Solution Manager using ChaRM. How do we set up the logical component at SAP, how we define the transport route and layers, and how we define the actions in the SDHF ticket.
I appreciate your help.
Regards
Esteban

Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM

ChaRM: transports to several production systems possible?

Similar Messages

Maybe you are looking for