CHARM + WILY Interoscope + qRFC in Solution Manager 4.0

Hi Folks,
Please clear the below mentioned doubts:
1. Can CTS + workflow without CHARM config in solution manager can solve any purpose, if yes then let me know how?
2. How to configure WILY Interocope?
3. How to configure qRFC in solution manager to monitors the qRFC of ECC, XI, SCM system and what are limitation of this.
4. If I have to move the transport request where I am having 4-5 landcape using domain link, so what are the steps.
Document with appropiate reply would be rewarded.
Email: [email protected]
Thanks!!!!!!!

I have a question regarding the organization of Solutions in Solution Manager.
First, I have 3 solution manager boxes
1 Sandbox
2 Dev
3 Prod
In sandbox, I have a sandbox 'solution' that contains all sandboxes
In dev, I have no 'solution'
In production, I have all dev through production boxes lumped into one 'solution'.
I was thinking that maybe I should break up the solution in Production to have only prod boxes, and then build one in dev that contains dev and qa boxes.
My question is that when I configure CHARM to manager transports, will that work to separate DEV/QA from Prod OR will I need all the dev, qa, prod boxes in one 'solution' since that is how transports flow??

Similar Messages

Wily Introscope Version for Solution Manager 7 SPS 17

Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.

Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.

CHARM Tab does not appears -- solution manager

Hi Experts,
I want to configured CHARM but in tx SOLAR_PROJECT_ADMIN in System Landscape -- Change Request Tab does not appear
Also tx solar01 is locked! the project doc for example . But in scope a have not checked the link.
Any clue?

Hello,
In SOLAR_PROJECT_ADMIN are you creating a project or runing an analysis?
The Analysis screen is not tabbed, it is a tree.
Change request management apears under Solution.
When you create a project, there is not a Change Management Tab.
So are you refering to creating the project or performing the Analysis?
Regards,
Paul

Solution Manager 7.1 SP11 Functionality

Dear SAP specialists;
Our company is currently using Solution Manager for the following purposes:
Solution Manager 7.0 - to be decommisioned soon
Document repository for SAP systems.
Solution Manager 7.1 SP6
SAP Banking Services and SAP BW Upgrade Projects documentation.
Business Process Monitoring (BPMon) or Banking End-of-day (EOD) jobs, PI/XI interface queues, tRFC queues, Banking Services PCO/ PPO/CpD worklists, DBA Backup monitoring.
SAP Data Volume Management (DVM) for production systems.
Technical SAP system monitoring.
Non-SAP Technical system monitoring.
Intake Request Tool (custom-developed tool to log the request tickets through froms in SAP Portal).
SAP Maintenance (MOPZ).
SAP Early Watch Alert / SAP Ad-Hoc Reporting.
Root Cause Analysis.
Change Request Management (ChaRM) - *Under Development*.
We are planning to get Solution Manager 7.1 SP11 soon and I am wondering about the following:
Is there a comprehesive source of functional and technical information (presentations, white papers, guides, overviews) about Solution Manager SP11?
How much does the SP11 upgrade changes the Solution Manager usage for purposes listed above?
As of SP10 there is a new experimental MAI Alert functionality for Business Process Monitoring and Technical Monitoring. It is limited and does not support most of BPMon tools we use. This includes Application log Monitors, Notification BADI's, Monitoring Objects Lists, BW storage and reporting, monitoring templates and migration of current solutions)
How does CO Wily Introscope work with Solution Manager SP11?

Hi Viacheslav,
Here is the location for the info you are asking; Changes and New Features in SAP Solution Manager 7.1 SP11 - SAP Solution Manager - SAP Library
Regards,
Vivek

Solution Manager Diagnostics don't display data

Hi,
I'm setting up Solution Manager Diagnostics at Solution Manager SP 22. I've installed Wily Introscope Enterpise Manager at Solution Manager Server, and Wily Introscope Agents at Solution Manager and Satellite systems as well.
Wily Introscope is working properly, I receive statistics from all agents, and also I can see most of the graphics. BUT, after I install SMD Agent, I can't receive any data in Root Cause Analysis Workcenter -> End-To-End Analysis -> system -> Workload Analysis.
Here I can see a plot with all values at 0. If I try Enterprise Portal tab -> Portal Activity Reporting, I don't have any data.
At Aplication Server Java tab -> J2EE Engine, I only can see forms like:
     E2E CV PPMS ID Variable
     E2E Installation Number Variable
     E2E SID Variable       <SID>         <SID>
     E2E Metric Type Variable(multiple values)
               SERVLETS
               WEB DYNPRO APPLICATI ONS
               JCO CALLS
              SQL STATEMENTS
InfoProvider
              0SMD_PE2H
              0SMD_PERH
But if I execute or check this form, I receive this message:
Value "SERVLETS" for variable "E2E Metric Type Variable(multiple values)" is invalid.
I've also followed SAPNote 1435043 - E2E Workload Analysis - No applicable data found, and checked prerequisites, RFC's, Jobs, Extractors and executed SOLMAN_SETUP transaction.
I've followed all guides I've found for Diagnostics, but I don't know how can I solve this.
Please, could you help me?
Thanks in advance and regards.
Tomas.

Hi Tomas,
I have exactly the same problem, I am on Solman SPS22, LMSERVICE SP06 patch2.
and the satellite system pre-requisites and definition in SMSY are correct, also the MDX PARSER RFC is wrking fine.
any idea on why is the Portal activity reporing is blank, while i get data under all the other tabs.
Also, the agent application .log file shows the below warning
"PadcService@1cbd1cbd: file portalActivity_6057051_1278074505498.txt could not be deleted"
but i could not find the file in the satellite system.
Regards,
kaustubh.
Edited by: Kaustubh Krishna on Jul 12, 2010 11:21 AM

Multiple Solution Manager Connectivity to 1 Satellite system

HI..
I have a requirement. There is already an existing landscape with solution manager ECC, BI etc. The solution manager is configured for EWA, Maintenance optimizer etc. I now have to install a new solution manager and connect it to the same set of satellite systems so that I receive the EWA, configure MOPZ again. Will this create any kind of a problem and technically how can we do it? I have two ideas for this scenario
1. Connect the new solution manager to the same satellite systems and do configuration as normal. Got this idea from the below link but not sure how it will work.
Re: send EWA report to more than one solution manager
2. Is it possible to push data from the existing solution manager to the new solution manager?
Would highly appreciate technical suggestions. Thx in advance for your help.

Hello,
You need the SMD Agent in order to have ABAP data going to the Solution Manager. Some RFCs are established directly from Managed System to the Solution Manager to extract E2E Change Analysis, Exception Analysis. The Workload Analysis and Host Information (SAPOSCOL) is extracted from WIly EM
Having that said, you can imagine that you cannot have only RFCs and you cannot have only data extracted from WIly EM.
I suggest you to take a look at the FWK Administration in the solman_workcenter, choose the Managed System tab, and start looking into the details of each extractor. Some have an RFC destionation, others have SOLMANDIAG. The SOLMANDIAG are coming from the Solution Manager Java stack, which is responsible to poll the Wily EM.
The reason you need two SMD Agents is because the SMD Agent connects to the ABAP stack, retrieves data, and then connects to the Wily Enterprise Manager. The Solution Manager polls data from the Wily EM and persists it in the BW.
The SMD Agent doesn't support connecting to two Wily EMs at the same time.
So it is required to have TWO SMD agents polling data from the ABAP stack, at the same time, one of them reporting to one Wily EM, and the other reporting to the other Wily EM.
Each solution manager has it's own Wily EM, and it will pull the ABAP data from the Wily EM.
It is not possible to make the two Solution Manager's connect to one Wily EM, since the setup framework needs to see a SMD Agent available to run the setup wizard and to create the destinations. So each Solution Manager needs a SMD Agent running in the physical host.
I hope it is clear for you.
Best regards,
Guilherme
Edited by: Guilherme Balbinot on Feb 6, 2012 9:44 PM
Edited by: Guilherme Balbinot on Feb 6, 2012 9:49 PM

CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer

Hi Folks,
I am in urgent need of the configuration guide of SolMan 4.0.
as I want to implement CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer.
Also clearify the below mention doubts.
Scenario:
SAP is already implemented and Sol Man 4.0 is also installed.
We have 6 landscape of XI, BI, APO, CRM, SRM, HR, EP.
Also TMS is configured already for each and every system.
Doubts:
1. Can we do transport managment by using SolMan while we dont want to implement CHaRM.
2. Do we have to define the TMS again in the SolMan including routes and TDC or just we have to add the satellite systems with Sol Man.
3. What would be the detail steps for this.
Mail me docs at [email protected]
Thanks in advance.
Regards,
Akshay

Akshay Shail wrote:>
> I am from SAP Partener company. Do we have to pay any thing to get RKT PDFs.
>
> I would be very thankful of u if u will forward me PDFs at [email protected]
Hi Akshay,
as a registered SAP Partner, you should have access to
[SAP Support Portal - http://www.service.sap.com/support |http://www.service.sap.com/support]
Here you find all learning material from Ramp-Up Knowledge Transfer (RKT) for SAP Solution Manager 4.0.
[Ramp-Up Knowledge Transfer - SAP Solution Manager - http://www.service.sap.com/rkt-solman|http://www.service.sap.com/rkt-solman]
The documents PDFs, SAP Tutor sessions, ... may not be distributed or forwarded to you via E-Mail.
Best regards,
Ruediger

Logical systems while implementing charm in solution manager

Hello Everybody,
I just wanted to know how many logical systems we need while implementing charm in solution manager 7.0. I have 3 clients in development , 3 clients in Quality and 1 client in production.
Thank you,
vikram.

Hi Vikram,
Yes, i1n ChaRM we always work with logical systems, I mean clients.
The standard is:
DEV -> QAS -> PRD
However, you can also use:
- Minimum
DEV -> PRD
- Target groups
DEV -> QAS -> PRD
- > TST
DEV -> QA1 -> QA2 -> PRD
DEV -> QA1 -> PR1
-> QA2 -> PR2
There are a lot of combination possible.
BR
Fernando

Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

Hi Experts,
we are able to log in wily introscope, But metrics(values) are not coming in wily
we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
thanks in advance for you help
Best Reg

Hi Srivastav.
Actually i am new to solution manager, and we have done basic steps of solution manager like
system preparation,basic configuration,managed system configuration and technical monitoring,
in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
Best Regards,
Hanuman

Wily Introscope is not running in Solution Manager 7.1

Hello Experts,
wily Introscope is not running in solution manager system,
below error getting in log, solution manager is running on windows server and how to start wily in windows.
8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
Please assist me on this
Best Regards
Hanuman

Hello Srivastav,
i am getting below problem in wily introscope log
9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
at com.wily.introscope.em.internal.Application.start(Application.java:27)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
at java.lang.Thread.run(Thread.java:662)
9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
Please help me to sort this issue,
Best Regards,
Hanuman Chinthalwar

Solution Manager Service Desk & ChaRM Integration

Hi All,
I have query on integration between Solution Manager Service Desk & ChaRM. As we know u2013 it is possible to create a change request from service desk if the incident requires a change in the satellite system. In this case even we can see the list of all change requests (if we raise more than one) as connected / reference documents.
But we observe that it is possible to close the Service Desk request even if the ChaRM request is not closed / abandoned.
Just want to know if there is any configuration in Service desk, using which we can prevent the user from closing the incident in sevice desk till the time the ChaRM change request has not got closed.
Any pointers in this regard are welcome. Thanks a lot.
Best regards,
vithal

You can control using BADI development. Any Check or Save ( ORDER_SAVE ) badi you can write the condition based on the change document availablity.

SSO from Solution Manager to Wily Enterprise Manager issue

Hi,
We are facing problem in SSO from Solution Manager to Wily Enterprise Manager. We have done the configuration as per the Wily Enterprise Guide- "Introscope Version 8 Installation Guide For SAP" Page 38.
Our Solution Manager system is running on AIX platform and Wily Enterprise Manager is on Windows 2008.
This is what we are trying
SOLMAN Production Client --> SOLMAN_WORKCENTER --> INTROSCOPE WORKSTATION --> this opens a new browser page and from there we click on Start Introscope -->
Result --> SSO doesn't work, still we get login window.
Introscope Enterprise Manager logs says -->
9/12/11 10:47:17 PM BST [WARN] [Manager] Single sign on failed: No SAP single sign on ticket was found in the request header.
Note: Another Solution Manager system in our landscape (on windows 2008 platform) is connected to same Wily Enterprise Manager (windows 2008) and from this solution manager SSO to Wily Enterprise Manager is working.
Please help me with your expertise to solve this problem.
Best Regards
Davinder

Hello Singh,
Could you check if you have maintained these parameters in instacne profile ?
From SCN post -> http://scn.sap.com/thread/969538
Hi Hector,
To configure SSO as per initial setup guide, please check your profile parameters in your Solution Manager as below:
You have set up SSO, see also:
SAP Note 817529: Checking the SSO Configuration
Installation Guide and Security Guide for SAP Solution Manager
Create the following profile parameters in the instance profile:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = fully qualified server name
This parameter must be attributed to the fully qualified server name (for example wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.
Hope this helps,
Regards,
-Rohan
BR,
kamil

Solution Manager Charm configuration

Hi @all,
I´am using SAP Solution Manager 7.0 SP 15. Configurated all Charm Steps successfully.
The SAP Solutoin Manager - Scenario- Specific Settings - Change Management - Extended Configuration -Checks - Execute Check Report is green
I can´t open any hance cycle in solar_project_admin - System Landscape - Change Requests , Create Task List, I get the result "project is not released. hance cycle can not be created".
If i click "check", there are three errors:
Message from function module /TMWFLOW/CALC_SINGLE_TRACK: No source system
(Message no. /TMWFLOW/TRACK_N103)
No track for project DF_WART_01 with log. system A36/200
(Message no. /TMWFLOW/CM_CHECK038)
CTS projects in production systems for project DF_WART_01
(Message no. /TMWFLOW/TASKLIST190)
System change options are empty.
In my authorized Change Requests - related documents (next document). i get "there are no actions in the Worklist"
i´ve no idea where my fault is. I hope you can help me.
Please suggest.
Best Regards
Daniel

Now I have created a new maintenance project, I´ve configured everything, when I check it, I get two errors:
No consolidation system found for A36-200 (project DF_SOLMAN1)
Message no. /TMWFLOW/TRACK_N806
No track for project DF_SOLMAN1 with log. system A36/200
Message no. /TMWFLOW/CM_CHECK038
I noticed that this thread is pretty old already but I bumped into similar error messages and in the end it was caused by a TMS route configuration that didn't match the configuration of the logical component that was in use.
You can pretty easily verify this through SMSY. Navigate to your logical component there, select the line of the system assignment and click on Shipment Routes button. If you get an empty screen back, then your TMS transport route configuration doesn't match your logical component configuration.
For example, you've got DEV 100 - DEV 200 - PRD 100 for a CHARM demo landscape. If your TMS transport route configuration matches this but your logical component has DEV 100 assigned as Quality Assurance, then your configuration check for CHARM will fail because there is a mismatch.
When your configuration is correct, so both your TMS transport route as your Logical Component (system role assignment), then you should get a transport route configuration back (visible) after clicking Shipment Routes.

Problem in CHaRM Configuration - Solution Manager 4.0 SP16

Hi All,
We are in the process of configuring CHaRM in Solution Manager 4.0 with SP16. We have created the project and the activated CHaRM for that project and created the task list as well.
We are able to create the Change Request transaction and also approve the transaction successfully.
ISSUE
The popup of selecting a maintenance cycle while approving the Change Request is not appearing.
When we go to the document flow and select the next document it says
No maintenance cycle is open for the current system
Message no. SOCM_ACTION_LOG011
Maintenance Cycle is very much active when we check from transaction /tmwflow/cmsconf --> Environment --> Scheduling --> Display maintenance cycles.
We are not able to see any maintenance cycle from transaction code crm_dno_monitor
Any help would be highly appreciated.
Thanks and Regards
Siddarth

I have a question regarding the organization of Solutions in Solution Manager.
First, I have 3 solution manager boxes
1 Sandbox
2 Dev
3 Prod
In sandbox, I have a sandbox 'solution' that contains all sandboxes
In dev, I have no 'solution'
In production, I have all dev through production boxes lumped into one 'solution'.
I was thinking that maybe I should break up the solution in Production to have only prod boxes, and then build one in dev that contains dev and qa boxes.
My question is that when I configure CHARM to manager transports, will that work to separate DEV/QA from Prod OR will I need all the dev, qa, prod boxes in one 'solution' since that is how transports flow??

Error message in solution manager while importing transport using CHARM.

Hi All,
I am gettting below message while i am trying to import a change request using CHARM from solution manager
"You are not allowed to work on a CR for UNITEOPS"
"Data type-specifc customizing missinge for a data type"
But other user in our team able to do the import of change request. I checked all roles and authorization are same for both the user but still it is not working for my user-id and it is working for my team member user-id
Can you please guide? Is there any customizing missing for my userid?
Thanks

Hi,
Perhaps the info in this thread could be useful:
ChaRM roles or profile missing for Developer and Change Manager
Regards,
Srikishan

CHARM + WILY Interoscope + qRFC in Solution Manager 4.0

Similar Messages

Maybe you are looking for