Chars & kf's related to virtual cube not get updated via multiprovider

Hi Friends,
I've got one multiprovder, which has got two infocubes, one is 0CFM_C10 & ZRATES, in these one is basic infocube and the other one is virtual cube. So i've built the query on multiprovder which gets data from two infocubes basic and virtual, but when i'm trying to restrict in the query, the chars & kf's which are related to virtual infocube are not getting data, but the chars related to basic infocube getting data.
NOTE: i've checked virtual cube by choosing the "display data" option, here it is showing, bt via multiprovder it's getting updated, even i can't see the data for those chars in multiprovder also using "display data" option,
what would be the problem? why virutal cube data isn't getting updated?
any idea's
awaiting for your responce

Hi Siggi,
Thanx for your replay, actually the chars & kf's related to virtualcube are not in basic cube know! and also the query requirement is to get data from two cubes, i think in that case, not required to restrict at infocube level using 0infoprovider,
i can be able to see the data in virtual cube, but it's getting vir multiprovider, the assignment in multiprovider is right,
then what would be the problem?
Regards,
BalajiReddy

Similar Messages

Incorrect data with Virtual Cube 0FIGL_V10 when used in MultiProvider

Hi All,
I am using 0FIGL_V10 in a multiprovider with 0FIGL_O02 to solve a reporting requirment.
My problem is that I am unable to get the same revenue figure from the multiprovider as I am from the virtual cube alone.
In the multiprovider query I have filtered my revenue KYF's by:
value type
version
currency type
I have fiscal period across the top of the columns and filtered for example to 001.2009 - 006.2009
This query returns double the revenue value that I get if I run an indentical query on the base cube 0FIGL_V10.
I have found that if i filter fiscal period directly in the KYF restriction it outputs the correct result which is confusing.
Any ideas ?
help much appreciated.
Mark

Hi ..
Thanks for the suggestion but this note has already been implemented into our system.
Any other thoughts ?
thanks and regards
Mark

Few keyfigures are not getting updated in the backup cube

Hi,
We run the daily backup process chain which extract data from planning
area and store in the cube & ods.
There are infopackages which update cube & ods, the datasource & info
source is same for both ODS & backup cube.
But a few keyfigures do not get updated in backup cube where as we see
ODS getting updated for those keyfigures. Also there exist data in the
planning area for these keyfigures.
There is direct mapping between the keyfigures in cube & planning area.
We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
Need expert opinion on this.
Regards,
Chetana

Hi Chetana,
Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
~Rishi

544 Movement ,Qty & value is not getting updated in MC.9

Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.

Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh.

Service Number is not getting updated in the Purchase Requisition

Hi All,
When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction. I am passing all the services related parameters in the FM.
Please clarify this.
Thanks for the help.
Vinoth

Hi Vinoth,
Are you getting any error in the return table?Can you show your coding?
Regards,
ravi

Service Number is not getting updated in the PR called by BAPI

Hi ,
When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction.
I am passing all the services related parameters in the FM.
Thanks for the help.
F.F

Hi Amar,
need your help. i am facing the same issue.
how did you resolved it . please let us know.
Thanks,
Santosh

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

File does not get updated in document library

I'm encountering weird behavior which I hope you can suggest on how to further troubleshoot. There are some document libraries that whenever I upload a new version of a file, the file's contents do not get updated (when I open the file after check-in,
it still shows the old content) but the Modified By and Modified fields get updated.
Remote Blob Storage is turned on for our site; could it be RBS-related? However, only a few document libraries exhibit this kind of behavior.

Hi Kev,
There's no particular pattern in the differences between libraries exhibiting the behavior and those that do not. If it matters, the Style Library is experiencing this kind of behavior. We also have a document library renamed to "Images" (its URL
is /Images) that also exhibits this behavior. I also tried disabling and enabling versioning, still the same behavior. I even tried deleting the file and reuploading with the same file name, still the same behavior!

Step Container Element not getting updated

Hi,
I have created a step container element for handling comments with the same ABAP dictinary structure & import export parameter of a existing workflow conatiner element & binded with the WF container & step conatiner & i have the saved & activated the WF template sucessfully.but when action is being taken from portal on a Workitem then comments are being passed to the WF container but the step container that i created is not getting updated . i checked in SWI6 , it's showing not set.
can any help me on this regard.?
Thanks & Regards
Rohan Kumar Das

Actually, I believe the problem is related to binding.
When called in the foreground, object references (and data references) are present in memory for all subsequent processing.
You probably need to make the CONTAINER "Persistent".
In your code, call the macro SWC_CONTAINER_TO_PERSISTENT <container name here>. For example:
SWC_CONTAINER local_container.
SWC_CREATE_CONTAINER local_container.
" Set you Container elements
" SWC_SET_ELEMENT local_container 'Element01' lv_element01.
" SWC_SET_TABLE local_container 'Element02' lt_table02.
SWC_CONTAINER_TO_PERSISTENT local_container.
" Start your workflow passing local_container.
Something like this...
Hope this is relevent . . . Apologies if not . . .
Regards,
Tom Carruth

Billing due list not getting updated-deliver realted billing

Hello,
I am carrying out delivery related billing in CRM.
When i make an order in CRM and carry out the Goods movement (Post goods issue) and delivery in ECC,the document flow is getting updated in CRM.However,the billing due list is not getting updated.that is it does not show the delivery document to be billed.
Is there something missing?
Please advice
Thanks
Itty

Hi Naresh,
Can you please try to debug in the badi "CRM_UPLOAD_BEA_FILL " after saving the service order.
(May be i think there may be some custom implementations in this badi where it checks some conditions to be met were getting failed which results in not generating of billing due lists).
Thanks & Regards,
Vishnu.

BEx Query results not getting updated

Hi,
I am using a BEx Query based on a multiprovider which is fetching data from a multiple remote cubes and multiple regular cubes.
Now when data in the source system is getting changed the corresponding remote cubes are getting update but query result are not getting re-fresh for at least 2 hours.
We have already tried doing logging out and and logging into the bex system.
Is there some cache setting which is required?
Default cache mode in query is 'Main memory cache without swapping'.
Kindly advice.
Regards
Vivek

Hi,
Just generate your query once with program RSR_GEN_DIRECT_ALL_QUERIES.
By selecting your multiprovider .
Thanks,
Ranjan

Age not getting updated for past months

Hi all,
I have loaded the cube 0PA_C01 for HR data regarding Personal Administration.
Since I have loaded the cube in April,therefore in the cube when I see I get the correct Age of an employee for April.But for March,Feb and Jan I am not getting the Age as it is not getting updated.I checked the update rule 0HR_PA_0 and 0HR_PA_1,according to me it calculates the age based on system date.
The data in my cube looks as below:
AGE             CALMONTH                   HEADCOUNT
                 012006                         2679
                  022006                         2694
                  032006                         2694
15                042006                            1
20                042006                            1
and so on.
Could you please suggest how to get the Age for past months?
Thanks in advance.
Best Regards,
Yogesh

Is the update rule for age,a customized one?
If so it could happen that routine was setup after the data load of March.So April load is correct while the other older loads are not.
Try deleting and reconstructing the data requests of months older than April,in the cube.See if this corrects the age.
Another thing confused me.
AGE CALMONTH HEADCOUNT
012006 2679
022006 2694
032006 2694
15 042006 1
20 042006 1
Does datasource send 1 record for each employee?Looks so as it has employee age(which must be calculated by difference between date of birth and system-date).Then how come each record has HEADCOUNT field?
cheers,
Vishvesh

FSCM- Credit Exposure Not getting Updated

Hello,
We are implementing FSCM and we dont have XI / PI System . We are implementing BADI ( BADI_SD_CM ) and using implesit enhancement we by pass the XI / PI.
We referred one of the fourum for Direct update method and works fine. BADI is triggering and While creating order message also displaying but its not updating the credit exposure .
I have copied all the example implementation and method FSCM_CREDIT_CHECK_ORDER. but method FSCM_COMMITMENT_UPDATE_ORDER is not getting update in the Credit exposure.
Can anyone help me any config issue or Update i need to activate anything in the code . Please suggest.
Regards
Prabu K

Hi Karai,
Couple of things I will point out here. Try them and lets see where we stand.
1. The configuration:
     a. Liability Categories are defined.
     b. Credit Control Area is assigned to all the company codes.
     c. Sales Area assigned to Credit Control Area
     d. Both of these BADIs are activated: UKM_R3_ACTIVATE and BADI_SD_CM.
     e. The following web services are activated
CreditCommitmentNotification_In - Update credit exposure
CreditManagementAccountByIDQuery_In - Provide credit master data
CreditPaymentBehaviourSummaryNotification_In - Update payment behavior summary
CreditWorthinessQuery_In – Carry out credit check
2. Check if queue is not stuck. t-code SMQ1 and queue: UKM_DOCUMENT_PROCESS. If stuck please get it cleared.
3. To rebuild the credit exposure do following:
     a. Use UKM_COMMITMENTS to clear all the exposure.
     b. Execute UKM_RFDKLI20_AR and UKM_RFDKLI20
     c. Execute UKM_TRANSFER_ITEM
     d. Execute UKM_RVKRED07. Make sure nothing is processing at that time as it will put lock on all Sales related tables.
Please let me know if you have any questions.
Regards,
Prateek.

Master Data is not Getting Updated Properly.

Dear Expert,
I am trying to pull the data by Info package but The text is not getting updated.
The Master data object is 0BPARTNER . To update this Master data , we ghave 2 info packages
0BPARTNER_ATTR and 0BPARTNER_TEXT. But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
What could be the Reason for this and How can I solve this issue ?
Tahnks,
Utpal

Hi,
Could you please check the data in RSA3.
If everything is there in R/3 side.Then,please check are you giving any
condition in the infopackage .
Please run the infopackage without giving any condition.
Thanks,
Saveen Kumar

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Chars & kf's related to virtual cube not get updated via multiprovider

Similar Messages

Maybe you are looking for