Chart Account  Sample for Trading and Service

Hi Experts,
Can you provide me sample of chart of accounts ( segmented) where it is both for trading ( sales of components ) and service ( installation).
Please, your sample is highly appreciated for a new entry like me in SAP.
Cheng

Hi Cheng,
CoA is a huge list. It is not feasible to put it here. Beside, there are so many variables from every accounting department. There is no universal used CoA.
The above suggestions are good start you can follow.
Thanks,
Gordon

Similar Messages

  • Idoc for materials and service for same contract.

    Dear All
       I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01  and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
    Regards
    Somnath

    Hi,
    It is not clear to me if you are working with sapscript or smartforms.
    You have only to find a variable which identifies the kind of invoice
    I do not know that variable so i use an example variable
    for sapscript:
    /: IF &VBDKR-FKTYP& = '1'
    /  INVOICE
    /: ELSE
    /  SERVICE ORDER
    /: ENDIF.
    In a smartform you can also do something like that.
    but There you work with conditions (eq, BOOLEAN)
    You have only to find the right variable
    success,
    Gr., Frank

  • How can I have one "family" Apple ID and two icloud accounts one for me and one for the wife?

    MacVirgin!Just got new Air and iMac (iphones on the way). How can I have one Apple ID but two iCloud accounts (one for me and one for my wife)? I have set up one iCloud account and am attempting to share contacts between iMac, iCloud and Air, however iMac and iCloud are not in sync? I must be missing something very simple.

    ok. I set up the imac and Air with one user account. this was used to activae iCloud on both machines and I have now se up one iCloud account and managed to share calander and contacts between the two. Ultimately both me and my wife will have an iphone and we wish to share calenders and contacts. We both also use the imac and air on one user account. It looks like I need to set another user account then activate iCloud in my wifes Apple ID

  • I have two iTunes accounts, one for music and another for audiobooks.  I want to merge them and maintain only one iTunes account.  How do I do it?

    I have two iTunes accounts, one for music and another for audiobooks.  I want to merge them and maintain only one iTunes account.  How do I do it?

    You cannot.

  • Org model for sales and service

    Hi,
    I have an issue while creating org model, I want to maintain  organization for sales and service differently under a org unit, but in service org element when I have selected service radio button and type also as service in Function tab, it is effecting for all units, even the first org unit is also changing automatically to service.
    Please clarify!
    Thanks and Best Regards,
    Abdul

    Hi Abdul,
    I tried replicating what you have mentioned in your message and it is behaving exactly the same as in your case. So I dont think it will have any impact on your root org unit.
    Dont tick mark any of the options i.e sales organization,Sales office or sales group for your root unit.Just create one org unit and leave as it is by saving.
    When creating sales Org: Double click the the root org unit and click on "Create". Create the required sales organization(by selecting the sales scenario(radio button) and tick mark the sales organization in the funtion tab page.
    Now you have created your sales organization.
    When creating service organization: again double click the root org unit and click on "Create". Create the required service organization by selecting the service scenario(radio button) and tick mark the service organization.
    Now you have created your service organization.
    So when you select your org unit created as sales organization and switch to service scenario(radio button) and select the root org you will see the root unit also in service scenario and also you will not see any tick mark for sales/service/marketingin the root org unit.
    Reward points if helpful.
    Shridhar

  • Costing for Maintenance- and Service Orders

    hi
    Can any one tell me the Configuration steps for Costing for Maintenance- and Service Orders.
    Kindly please guide me.
    regards,
    R.Ramakrishnaraj

    Hi,
    Please go through below mentioned threads.
    Re: Activity Costing
    Re: PM order costing.
    Re: Planned cost not getting displayed in Maintenance Order
    Re: Costs not appearing in service order
    There are many threads available for Costing. Please search in the threads.
    Regards,
    Maheswaran.

  • CATT Test case for  ME41 tcode(Multiple items for inventory and service )

    Hello Gurus,
    Now we are having quotation legacy file for Tcode ME41 for inventory and service items. We are using tcode <b>SCAT</b>
    for CATT. Every thing going fine at recording in test case. i dont know where should i specify my legacy file path. I found there is one download option while before running test case. its not taking the file path.  is there any other file path for running test case?
    advice me.
    regards
    dinesh.a
    <b></b>

    Hi
    I think you should use an abap program and not LSMW, because the problem is you have to create a recording for trx ME41 in the LSMW and after you can't change the abap code created.
    In this way you could insert only a certain number of items by a project of LSMW, and it depends on your recording.
    So if you can't know how many item should be loaded, it's very hard to use LSMW.
    Max

  • Different PPV account required for GR and IR

    Hi Experts,
    I have an issue about the requirement that different PPV account required for GR and IR for the correcording Valuation class.
    Eg: when do the GR,the PPV account should be 3528***, but when do the IR, the PPV account should be 3522***.
    Any body can tell me how to fulfil this requirement? Thanks in advance!
    Regards
    Jimmy

    hi
    please clarify PPV
    gl accounts are maintained in OBYC ,better to aksur Fi person

  • My account names for iCloud and iTunes is different, is this why my Iphone4 is not syncing with my iMac?

    My account names for iCloud and iTunes is different, is this why my Iphone4 is not syncing with my iMac?

    No, perfectly normal to have a separate iTunes account for music/app purchases to the one you use for iCloud syncing of contacts, notes, etc.

  • The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.

    The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.  I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone.  I tried turning contacts for both off and on and rebooting, but it didn't help.  Any ideas?

    Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting.  You would need to check with your employer's IT department to confirm this.  You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.

  • Accounting entry for trading spares and consumables

    Hi All,
    I would like to know the accounting entries  when accounting for trading spares and trading consumables? Need to create 2 new valuation classes for both instances.
    Appreciate all help,
    Thanks,
    Savindi

    Hi,
    To check/ Maintain CO Object for an Account...
    Go to: FS00
    Enter G/L A/c:
    and Company Code:
    and click Tab: Edit Cost Element.
    Maintain Valid from and Valid to
    And Click tab: Master Data.
    In Tab: Basic Data--> CElem category
    Go to Next Tab: Default Acct Assignment-->Cost Center.
    And Save.
    Please revert for futher clarification, if any.
    Best Regards,
    Amit.

  • Regarding change in the account number for an existing service number.

    Hi,
    Here the scenario is as it goes:
    A customer with an account number(20xxx) has a service number(4206xxxxxxx) mapped to it.
    In the month of September. Till 28/09, the account number is mapped to this service number. For the next two days. It has been moved to another account number(22xxx)
    Now in the Billing Summary/Account Summary when I select the month of September, it should show me both the account numbers one contains some data and some contains the other. But it is showing only the old account number in the drop down.
    select * from
    select unique
    'false' checkbox,
    ad.account_key as account_key,
    ad.account_num as account_num,
    ad.contact_name as contact_name
    from
    EDX_RPT_ACCOUNT_DIM ad,
    select
    xr4.*
    from
    select
    xr3.CHILD_KEY,
    xr3.OBJECTURI,
    xr3.OBJECTTYPE
    from
    EDX_RPT_HIERARCHY_XREF_DIM xr3
    where
    xr3.OBJECTTYPE='edx:amf:billingaccount:'
    start with child_key in (?)
    connect by prior child_key = parent_key
    ) xr4
    EDX_RPT_HIERARCHY_NODE_PERIOD np
    where
    xr4.CHILD_KEY=np.XREF_KEY
    and np.PERIOD_KEY=?
    ) xr5
    where
    xr5.OBJECTURI='edx:amf:billingaccount:' || ad.BILLER_ID || '|' || ad.ACCOUNT_NUM
    and ad.ACCOUNT_NUM like '%' || ? || '%'
    and ad.contact_name like '%' || ? || '%'
    order by
    account_num asc
    order by
    account_key asc;
    Please let me know how to edit this query.
    what I have done was: I removed this part " and ad.ACCOUNT_NUM like '%' || ? || '%'" and it was giving me all the account numbers in that month. But it was user specific and it may affect some other users.

    Can you post some example data and expected output in a way we could use it?
    And please edit your post to format the code using {noformat}{noformat} tags.
    You've been a member here for long enough to have an idea how to ask a question and format code.... please read {message:id=9360002}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Need Single Billing Document for Materials and Services in Sales Order

    Hello Friends,
    I am selling FERT items and DIEN items in the Sales Order.
    Document flow as follows:
    Finished goods - Order-Delivery-Billing
    Services - Order-Billing
    In this process 2 seperate billing documents are created
    i.  Delivery Related Billing document for Finished goods.
    ii. Order related Billing document for services.
    I want to create a single billing document for both the items (FG & Services) in the sales order.
    Please suggest.
    Thnx.

    Sorry for the delay friends.
    Somebody suggested me to make services 'relevant for delivery' to ensure single billing document.
    What I did were the following steps:
    1. Copy Item Category TAD to ZTAD and make is 'relevant foir delivery'
    2. Assign Item Category ZTAD to Sales Order type and Item Cat Group 'LEIS'
    3. Go to Deliveries Item Categories and through new Entries add ZTAD. Make ZTAD relevant for Picking.
    4. Go to copy control 'Order to Delivery' and insert ZTAD in Item Categories relevant for this combination.
    Now when I create sales order with materials and services, they pass over to the delivery document and in the Services item, storage location/plant is greyed out. Only the picking quantity is required to be filled.
    PROBLEM :
    I am not getting the price of Services item in the billing document.
    Billing document copies all line items (tangible and intangible) from Delivery Document
    It takes the services item details/quantities etc. to VF01 but the price comes '00.00'
    Any suggestions.
    Is this legally viable? Someone told me its not legally correct.
    Thanks.
    Mohammed

  • Check GL(Bank) account balance for banks and stop payment if sufficient

    Hi Experts
    Requirement is to check GL account balance for bank account and check whether enough balance exists for effecting payments. In the absence of insufficient bank balance, payment should not be effected. Balance needs to be check either manual cheque payment or automatic payment program.
    Please provide best solution.
    Regards

    Hi,
    Requirement is very clear,
    this is critical requirement, normal situation nobady update values in Available amount every day in FBZP
    If you want to impliment this reqirement, discuss with technical person (ABAPer) to impliment BADI functionality.
    As a functional consultant you have to tell the technical person,
    1 - Create Z internal maintanance table. for house bank & Company code againest available amount.
    2 - During payment (FB01,F-53,F-48,F-58 & F110) system need to Compare table Vendor open Item (BSIK) and Z teble balances, if Z table balance is less than table (BSIK) value system stop the process else system process for payment.
    for better clarification discuss with technical expert.
    Regards,
    Viswa

  • Accounting software for mac and iphone

    Hi I am looking for a accounting software which is compatible with my macbook air and iphone.  any suggestions?

    Not sure if you mean personal finance software, but iBank is one good option for that and it has both Mac and mobile versions:
    http://www.iggsoftware.com/ibank/
    http://www.iggsoftware.com/ibankmobile/index.php

Maybe you are looking for