Chart are not supported in crystal report - on top of SAP R/3

Hi All,
I have made one crystal report on top of SAP R/3 system. I have included some graphs on it.
But when i uploaded that report on infoview portal, it shows blank page when i try to view it on portal. It works fine in Crystal Report 2008.
I have one other report without graphs, it works fine on infoview portal. This reports works fine with "Enterprise" authentication.
Products:
- Crystal Report 2008
- Business object Enterprise 3.0
- Authentication: Enterprise
Please help as soon as possible.
Regards,
Rishit

Hi..
Ya.. its strange!! Because when i have created a report without Chart.. it works fine on portal. But when i added a chart in same i get blank page.
And have you make that report on top of SAP R/3 (Or ECC).
Even when i have made report on top of SAP BI with chart.. it works fine on portal.
The issue is just with SAP R/3 (Or ECC).
Regards,
Rishit

Similar Messages

Danish character and Symbol are not displaying in crystal report 2008

I am developing a crystal report. The report displays data from database. The data is entered into database from a asp.net web form where a JavaScript Editor is used. Mainly data is saved in Danish character and also there are some emotion symbol. The web page is showing these data reading from database perfectly. But the Crystal Report is missing some Danish character as well as emotion symbol in some cases. The screen print both for web page and crystal report is shown bellow. The database field DataType is “CLOB” and using Crystal Report 2008.
Can anyone help me to get rid of this situation.
Thanks to you all.

Please have a look at the resolution in this thread:
CR 2008 - Oracle 11g - CLOB fields are blank when using command
-Abhilash

Japanese characters are not displayed properly - Crystal Report XI

Hello,
We are upgrading reports from CR8 to CR11.
When I preview the CR8 report I can see the Japanese Characters (Coming from Database).
After saving the CR8 report as CR11 report, When I preview the report I cannot see the Japanese Character which I was able to see in CR8.
Why I am seeing unknown characters in CR11? When CR8 displays Japanese, then CR11 should display right?
Please help.
Thanks in advance.

These are simply community forums - not technical support as such. You may, or may not get an answer. If you do need to contact technical support, you may want to consider obtaining a one case phone support contract from here;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

BEx hierarchies not displayed in Crystal report parameters

Hi All,
I am trying to using a Bex query that has a cost center hierarchy with a variable that allows users to select specific nodes or even cost centers. In BEx reports, this query works fine and gives the users the view of the cost centres in a hierarchial manner. However, in Crystal reports, the query provides a drop down menu displaying a simple list of all the cost centres (not in a hierarchial manner). This confuses the user as to which element is a node and which is a cost centre
Kindly suggest how can we achieve the cost centre hierarchy to appear in the parameters in Crystal.
Thanks

Hi,
this is a duplicate to this entry:
key figures are not displayed in crystal report
Please do not post the same problem multiple times
regards
Ingo Hilgefort

Crystal Reports transport files for SAP APO / SCM

Hi there,
Problem: we want to use Crystal Reports on top of SAP APO / SCM and have some difficulties getting the definitions of BW / OLAP servers right and don't know which transports to import on the SAP to report with Crystal.
System is a SAP SCM system with APO module. There is a cube in this module (because there is some internal BW system) and I can see the cube in Crystal Reports. When I want to report from this cube I get an error:
"/CRYSTAL/MDX_GET_STREAM_INFO" not found.
This means some transport files were not imported and some functions are missing.
The following transports are missing:
====quote from transports_EN.txt included in transports for Crystal Reports=====
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
===========================================================
My SAP BASIS expert refuses to import these transports in SAP SCM, because he thinks it is not an SAP BW system as listed in the above transports_EN.txt file. Just trying is not an option because transports cannot be removed once imported...
In my opinion these transports have to be imported to clearly access the cube and will work on SAP SCM even if it's not a 'dedicated' SAP BW environment. In other words, these transports should be imported and will work on SAP OLAP servers like SAP BW, SAP SCM, SAP SRM (APO) or SAP SEM.
Does anyone of you have some more experience on reporting from SAP SCM / APO cubes and if I can import these transports without getting some nasty errors, because its not an SAP BW system?
Kind regards!
Edited by: J. van de Mheen on Mar 3, 2009 4:21 PM

Thanks for your reply, but this is not helping me much.
Let me explain more.
In the transport_EN.txt file we see this:
If your SAP system is running on a 6.20 *BASIS system* or later, you must use the files listed below:
(These files are Unicode enabled.)
* Open SQL Connectivity transport (K900574.r21 and R900574.r21)
* Info Set Connectivity transport (K900575.r21 and R900575.r21)
* Row-level Security Definition transport (K900576.r21 and R900576.r21)
* Cluster Definition transport (K900585.r21 and R900585.r21)
* Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an *SAP BW system*:
(These files are Unicode enabled.)
* Content Administration transport (K900579.r21 and R900579.r21)
* Personalization transport (K900580.r21 and R900580.r21)
* MDX Query Connectivity transport (K900581.r21 and R900581.r21)
* ODS Connectivity transport (K900582.r21 and R900582.r21)
So I have to import 5 transports in SAP BASIS system and 4 transports in SAP BW system to make full use of the integration kit.
SAP SCM / APO is basically a BASIS system, so the BASIS expert says only those 5 transport have to be installed.
But SAP SCM / APO is also having some reporting capabilities and stores data in OLAP cubes (Infocubes).
In Crystal I can see these cubes when using SAP BW MDX connection.
To make the error go away, I must have some function modules used in transport 'MDX Query Connectivity transport. But the BASIS expert doesn't want to import this transport, because it is listed as a transport for a SAP BW system and he says SAP SCM / APO is NOT a SAP BW system (it's a BASIS system).
And now I have to get some proof that this transport has to be imported in the SAP SCM / APO BASIS system before he installs it...

Failed to export the report \n Crosstabs and OLAP grids are not supported in this export format

Post Author: ajaymoudgil
CA Forum: Other
We are using Crystal Reports (Product Version: 11.0.0.1282). We encountered with a problem while we are going to export report in CSV (Separated Text). The report Contained Cross-Tab. Its Shows the Error Message u201CFailed to export the report \n Crosstabs and OLAP grids are not supported in this export formatu201D. Please find the attachment with this mail having screen shot for the same.
We were able to export CSV (Separated Text) Format in Crystal Report Version 7 for the same report. Please let us know any way(s) so that we will successfully export the report in CSV (Separated Text) format in Crystal Reports version 11.
Thanks,
Ajay Sharma

Hi Ludek ,
Thanks for reply,
I download CR2008 Redistribale & Installed it.
But still I am getting following error on client PC;
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
Please give solution.
Thanks

Reports older than version 9 are not supported

Hello,
I tried to access crystal reports rpt files from java client application:
reportClientDoc.open(filename,0);
and I got the following error meassage as ReportSDKException:
Reports older than version 9 are not supported.
I am using the jar files of the here downloaded JRC pack as runtime libraries (actually in NetBeans IDE 7.2.1).
I tried the followiing packs:
crjava-runtime_12.2.217 : SAP Crystal Reports for Java Runtime Components - Java Reporting Component (JRC)
and
JRC 11.8
giving similar error message.
Is there any older pack available for download prior of Crystal Reports version 9 ? I could not find for very long search.
Or is there any other possibilty to access such RPT files from java? (Actually these file are generated by IBAK-IKAS Sewer Inspection Software).
I suppose VisualStudio is a possibility (which version?), but java would be better for us on our operation system platform.
thanks for any tip
Marcell

Ted,
I am actually using your JSP page code from "Ensuring Report Cleanup" blog.
All my reports have a date stamp of 2006-2009, so they are fairly recently.
And they are 3rd party, not sure I can modify them (technically or legally)
I tried to open several other reports (with more recent datestamp), and got exceptions like:
Error
Error finding JNDI name (CSGSQL_2K5)
What might be causing that and how to fix it?
(I try to open it from file system, not RAS. Running JSP on Tomcat6. maybe some XML config file missing?)
Does it mean that this report is not too old for CRViewer12, so we are one step further ?
Also, how do I pass info to that report via JSP (DB connection, parameters, etc)?
Any good documentation/books on working with CRViewer 12 with JSP ?
I could only find books on how to use CR with .NET.
Sorry for the newbie questions, very new to CR.
TIA,
Oleg.

Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy

I Created a power view in Excel 2013 and uploaded to my Power BI for o365 site.
But when i click on my excel file it opens in browser,After that i click on File tab its showing me two option
1. Save a Copy
2.Download a copy
When i click on save a copy its showing me an warning below
Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy.
Continue with Save?
If i continue saving it only saves an excel files with data only not the power view which i want to save with applied filters.
Please help me for this

Just to clarify, when you hit the option of Save As Copy, the whole experience goes into a "read-write" mode in Excel services, which currently doesn't support authoring, just consumption of PowerView sheets.
Two mitigations that come to mind:
1. Download the copy (as Brad suggests), rename the file and upload.
2. Use the send to option of SharePoint online, give the file the right target document library (can be the same as source) and rename the file:
GALROY

Error Message: "The formula syntax is not supported by the report"

We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
But when I tried to Add FormulaField, it succeeds
Please help me in knowing how to add SQlExpressionFields to ReportDocument.
Regards,
-atul

Thanx Don & Ludek for the reply.
CR provides support for addition/modification of SQLExpressions.
CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
innerReport .SQLExpressionFields.Add(name, strSQLExpression)
CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
Thanx
-atul
Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

Access DB (& .ldb file) does not close after crystal reports

Post Author: mgold
CA Forum: Crystal Reports
Access DB (& .ldb file) does not close after crystal reports
Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
A few key pieces of information:
- The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
- It worked on this client's network until sometime in the last few weeks.
- One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
- It works fine running the application from a Windows Vista PC with a user who is a domain admin.
- The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
- The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
- I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
Thanks!
- Mark

Crystal doesn't support tables in HTML interpretation.
You can probably work your way around this by doing Replace() calls on the relevant tags.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
The supported HTML tags are:
" html
" body
" div (causes a paragraph break)
" tr (causes only a paragraph break; does not
preserve column structure of a table)
" span
" font
" p (causes a paragraph break)
" br (causes a paragraph break)
" h1 (causes a paragraph break, makes the font bold
& twice default size)
" h2 (causes a paragraph break, makes the font bold
& 1.5 times default size)
" h3 (causes a paragraph break, makes the font bold
& 9/8 default size)
" h4 (causes a paragraph break, makes the font bold)
" h5 (causes a paragraph break, makes the font bold
& 5/6 default size)
" h6 (causes a paragraph break, makes the font bold
& 5/8 default size)
" center
" big (increases font size by 2 points)
" small (decreases font size by 2 points if it's 8
points or larger)
" b
" i
" s
" strike
" u
The supported HTML attributes are:
" align
" face
" size
" color
" style
" font-family
" font-size
" font-style
" font-weight

Where is the Tech Support for Crystal Reports

Where is the technical support for Crystal Reports? I have just been through one of the worst technical supports circles in my entire career - this phone# to that phone# and only to be told you cannot talk to a Tech Support person. My dilema for anyone that can help - I am using Crystal Report 2008. I have mapped to a database in MS Access 2002. I copied the database to my desktop and created a test report. I can see the fields in the Field Explorer. I have dragged the fields onto the report and they are visible in Design View. I can see the data in the fields when I browse the fields. In the Preview View I do not see any data what-so-ever. I have not changed any defaults and have not suppressed or hidden information. The $1M question: Why can't I see the data on my report? I never had the problem when I used Crystal Reports v8.

The datasource shows my database. I believe that is what you meant. No data. IT has asked me to ask ? if in the Control Panel DSN if we need some information there. I don't have a clue - I am just a report writer and not an IT person.

VS2010 will support Seagate crystal report 6.0?

Hi All,
This is to inform you that we are currently using the VC++ 6.0 and Seagate Crystal Reports 6.0 in our application and we are successfully upgraded vc++ 6.0 to VS 2010.
but We tried Seagate Crystal report 6.0 to lastest version ,but rewrite application in our side , so we won't possible to rewrite application.
My question is, VS2010 will support Seagate crystal report 6.0?
Thanks & Regards,
Esha Abdullah M
Edited by: Esha Abdullah on Jun 27, 2011 8:41 PM

Hi Esha,
VS supports Managed Code now, using unmanaged C++ code may or may not work. As we've all told you, CR 6 is 12 years old now and it had no concept of Visual Studio 2010 or managed C+. It's still c+ so if you get it working then great, if not there is absolutely nothing we can do for you. There should be no reason it won't work as long as the C++ dependencies included with VS 2010 still supports 1997 VS 5/6 C++ runtime. If those dependencies are not available then Cr likely won't work.
For the last time, upgrade to CR for VS 2010 and move to CR Assemblies, you can still write and use CR in Managed C+, lots of people do, we don't have any samples for you though. Lot's of C# samples which is MS's replacement for unmanaged C+.
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Bottom line is we can't Confirm if it will work, you are mixing 1998 and 2011 technologies so there is absolutely no guarantee from SAP this will ever work and you will never get one from SAP. You are on your own....
There are so many reasons why it likely won't work to list, OS's, DB clients, Windows Dependencies, SECURITY, to name a few that even if it did work does your Company want to sell and support something that if your users have issues there is no way of ever getting it fixed?
Seriously, It's time to talk to your Product team and catch up with current technologies and Crystal Reports.
Don
Senior Support Engineer
AGS Primary Support
Global Support Center Canada
SAP Canada, Inc.

BW Query does not load to Crystal Report

Hi,
I'm trying to create a Crystal Report based on existing SAP BW queries. I followed the steps provided after installing the SAP Integration Kit. Checked 'Use MDX driver with support for multiple structures'.
On SAP menu > Create New Report from a Query.
Managed to login to the SAP server using my Logon credentials. Select the BW query and click OK.
The problem I have here is that the query never loads into Crystal Report with the Field Explorer. The cursor shows that the query is loading. I've tried on two different queries and it never loads unfortunately.
Please let me know if I missed out any steps or there are some issues with the connectivity. Any suggestions or ideas are appreciated. Thank you.

Also you can view
Re: Function module "/CRYSTAL/MDX_GET_STREAM_INFO" not found.
Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found
Hope it helps.
Regards
Lalit k Tyagi

SSRS reports are not fitting properly in Report Viewer Control

Hi All,
We are using Report Viewer Control to render SSRS reports & show it on SharePoint web page. In .aspx page we are putting Report Viewer Control as follows:
The zoom percent of Report we are getting from Report Server is 100%. We are making it as 50% to show it on our page. On one page, we are showing 2 reports.
<rsweb:ReportViewer ID="rpv2Chart1" runat="server" Font-Names="Verdana" Font-Size="8pt" ProcessingMode="Remote" Height="211px" Width="813px" ZoomPercent="50"></rsweb:ReportViewer >
The reports are coming. But the reports which we are getting inside the control are not readable & 25% of Report Viewer Control on our right hand side is blank.
As you can see it's not readable. For readability we want to use that white space also & want to utilize full controls's space. But if we try to increase percentage from our report viewer tag, then the graph is zooming in with both, height & width
so it's going out of control.
Client don't want scroll bars on Report Viewer control. We just want to utilize the entire Report Viewer Control space.
Can anyone suggest us how to do that?
Thanks,
Sanjay

Hi Sanjay,
I'm afraid that it is not the correct forum for this issue.
If it is the SSRS issue, you could post this issue here:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
If it is the VS report control issue, maybe you would get better response here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fonts supported by crystal reports XI

Post Author: kapsi
CA Forum: General
Does Crystal reports XI support postscript fonts?
Does Crystal Reports XI allow postscript fonts to be exported to PDF? (I know that this was not possible in Crystal Reports 9. Has this been resolved in XI?)
Many thanks in advance...

First check is to ensure the Java JVM can see the font. The Java SDK comes with the JFC demo Font2DTest. Do the fonts show up there?
Note that the Java JRE has a lib/fonts directory, where you can place TrueType fonts that the JRE then would use.
Sincerely,
Ted Ueda

Chart are not supported in crystal report - on top of SAP R/3

Similar Messages

Maybe you are looking for