Chart Color Issue

Is it possible to change the color of a pieseries data row
depending on a value? For example if the value is greater than 90
the color should be always red. If it is less than 90 and greater
than 70, the color is yellow.. Something like this.
Thanks.

Thanks for your reply. I was able to see the field only after I added it to the report as specified by Deepa. I configured the Highlight Expert to use the new Flag field. Basically if the field was 1 then the bar should be red.
However the the color of the bar in the chart did not change color. I checked the data being passed to the report and the Flag field was set to 1 for the output however the color of the bar did not change.
Do you have any suggestions?

Similar Messages

  • PIE Chart color assignment

    I have a Pie chart where the actual data values are Green, Red and Yellow and the user wants the chart colors to be same as the data values.
    Is there any way I can do that?
    Currently using APEX 4.0.1.00.03
    Any help would be much appreciated.
    Thanks, Greg
    Edited by: Greg McEachern on Dec 4, 2012 10:38 AM

    Thank you Matthew. That worked kind of.
    The issue is the query returns Yellow, Red, Green, Black in that order. So when I do the custom colours in that order everything is fine when all those 4 values are returned. But if no data comes back for Red. The data values for Green show up as the color Red and the Black shows up as Green. Any way I can resolve that?
    Thanks, Greg

  • Chart color palette , where can I change it?

    Hi
    I would like to change the colors on the charts, in other tools there are usually color palette for this kind of issues. Where can I find OBIEEs chart color palette ?
    Kind Regards

    Hi ketori86,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are looking for more information about Restrictions or Parental Controls, you may find the following article helpful:
    iOS: Understanding Restrictions (parental controls) - Apple Support
    Regards,
    - Brenden

  • Getting the default pie chart colors

    Hello,
    I have a pie and a bar chart that display the same
    information... Pie charts colors are filled automatically, and I
    would like to use those colors for my bar chart as well... is there
    any way to get those colors?
    Tnanks.

    I ran into this issue myself and figured it out here:
    Can I access Flex's default Chart colors? Or can I access a Series' current color?

  • IGS Pie Graph - colors issue

    Hello all,
    I'm displaying an IGS Pie graph in a Web-Dynpro application.
    Since in a pie graph the different parts of the pie are of the same series in different elements,
    I couldn't find a way to set different colors to them using the chart designer.
    When choosing a specific color, all the parts appear in the same color.
    When choosing an automatic color, they appear in different color,
    but then I don't have control over the color.
    Is there a way to define the pie so that every part is of a different series?
    Otherwise, Is there a way (by using the chart designer or by code)
    To achieve an IGS pie graph with the colors of my choice?
    Thanks ahead for any help,
    Anuj

    Hi
    Use this [thread|IGS Pie Graph - colors issue; for IGS Pie Graph - colors issue problem.
    Best Regards
    Satish Kumar

  • Column Chart Colour issue!

    Hi All
    1.  I am using the column Chart...But my Series count color is not changing..it is coming in default color as green..I have done all the color settings..
    2.How to display chart with negative values???
    Anyone has faced such issues & any solution for this..
    Thanks
    BI Learner

    Hi All
    Alast I resolved the color issue...Due to exceptions it was not dispplaying..
    I think even for negative value, we can set the MIN value with -ve value...
    Hope resolved it on my own...
    Thanks
    BI Learner

  • IPhone 5s screen color issues

    Got a 5s, love, however I was wondering, the color white seems "yellowish". I was able to get one (AT&T) through Best Buy, and ordered one through Apple. Both phones seems to have the white color issue. I went to the Apple store and compared the screens, my phone seems "yellowish", even confirmed by the Apple employee. Anyone else having issues?

    Thank you for your help, Shipping cost is a issue. I will contact the apple soon
    Thank you

  • I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

    I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

    Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
    When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
    I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
    The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either.

  • Camera Raw 8.7.1 color issues

    After the recent camera raw update to 8.7.1 I have noticed some pretty bad color shifts between camera raw and photoshop cs6. The colors in camera raw look very saturated and then when moving into photoshop the saturation shift is pretty dramatic. I never had these issues before the update. I have attached a screenshot illustrating the color issue. I am working on a very good monitor ( NEC PA 242W ) and it is color calibrated using NEC Spectraview calibration system. I have double checked my color setting in photoshop and camera raw to make sure I was viewing the same color space. I am just wondering if this is maybe a bug in the update and others are experiencing the same issues or if I am just missing something.
    I would also add that I am using the Creative Suite CS6 and not CC. If that makes a difference.

    Thanks ssprengel for the suggestions and running a side by side yourself. I went through all my settings and applied your suggestions and did a side by side each time. I even uninstalled the entire creative suite on my system then reinstalled and updated and I still get the same outcome. It was fine yesterday with the previous version of ACR. It seems like the updated version is not showing the image preview in any color space. When I switch the color space in the workflow options the histogram changes but it doesn't seem to affect the preview window. And yes the preview button was checked on it was just when I was using the screen grab tool in windows it took focus away from the application so that is why the settings appear grayed out. I have attached more screen grabs below illustrating all my settings. Also here is some system info if anyone out there has a similar setup and would be willing to test.
    Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1

  • Photoshop CC Color Issues

    When I updated my Photoshop program two updates ago I began having color issues in Photoshop as the rest of the Adobe Suite.  Regardless of whether the color mode is RGB or CMYK the colors appear washed out on the program.  This image http://i.imgur.com/BWVwbx2.jpg  is an example. The image on the right is a screen shot of the original image of the shoes copied from the website, the image on the left is the same image copied into photoshop. When I try to save the RGB file as a jpeg or a PDF it looks the same as it did in the program, washed out.  However,  when the file is CMYK color mode and I try to save it as a jpeg or PDF it looks like this http://i.imgur.com/TAUyeOf.jpg. Both my coworker and I started having this issue on our seperate computers around the same time so I don't believe that it is a graphics card issue or something along those lines. How can I fix this?  I have tried calling Adobe support, but unfortunately the person on the phone was not very experienced in the program and unable to help.
    Some Info about my computer:
    Currently I have Photoshop CC with the 14.2.1 update.  I have Windows 7 Professional SP1, 64-bit OS,  8 GB of RAM (7.87 GB Usable) and 360 GB free space on the (C:) drive.

    Illustrator and Windows Photo Viewer agree. They should, because they're both fully color managed. I assume Photoshop shows the same.
    Picasa is not color managed. All bets are off there, it can display like anything under the sun, depending on what color space the file was created in, and how your monitor displays color.
    There is a basic checklist for color management issues:
    1 - is the application color managed at all?
    2 - is there an embedded document profile, and what is it?
    3 - what is the monitor profile?
    We've established #1. For #2, see in the lower left corner of the Photoshop image window. Click the little arrow and check "document profile". What does it say?
    #3 is often the critical one. This is where your calibrated monitor profile should be - but if you don't do that, it's often a manufacturer supplied profile. These are often worse than worthless. The best option here is to use sRGB if you have a standard gamut monitor (like the U2412) - or Adobe RGB if you have a wide gamut monitor (like your co-worker's U3011). Yes, there is a significant difference between these two.
    Anyway:
    Go to Control Panel > Color Management > Devices. Set sRGB IEC61966-2.1 as your default monitor profile there and relaunch Photoshop:
    With this setting, Photoshop, Illustrator and Windows Photo Viewer will display  (more or less) correctly. It could still be that the file had the wrong document profile, or none at all, but the file will display correctly as it is.

  • HP 7260: Photo tray = color issues (pink photos)

    Hi,
    I have a 7260 and it's working fine, as long as you don't use the photo tray.
    Today I tried to print a couple of photos on advanced hp photo paper.
    No problems at all, except that the picture is completely... pink.
    So I tried to mangle with the color settings (in windows) and eventually ended up with 6 pink pictures.
    Since I thought this was a settings error, I tried printing straight from the SD memory card.
    I figured that if there was no computer involved, there wouldn't be any setting issues either.
    And thus I ended up with 7 pink pictures.
    I finally decided this would probably be an ink issue, but to make sure I tried to print the same photo on a regular A4 sheet.
    And... no color issues there! Printing on regular A4 sheets works just fine!
    Any idea how I could make the printer print the right colors on the right paper?

    I suggest opening the Print & Scan System Preferences, then highlight your HP Photosmart printer in the printers list and delete it by pressing the minus sign. Now, re-add the printer by clicking on the plus sign and select the printer. Make sure that the 'Print Using:' pull down aut selects the correct driver for your printer. If it doesn't, pull down the list and manually select the correct driver using the 'Select Printer Software' option. Hopefully that will resolve your issue.
    HP Printer Support for Mac OS X

  • Color issues

    Hi, I recently installed Creative Suite Web Premium, and have
    weird color issues. If I open a jpeg in fireworks it looks correct,
    but if I open it PhotoShop CS3 or Windows Photo Gallery the colors
    look REALLY bright, not even close.
    Any Ideas on how to fix this?
    Thanks

    In Photoshop, try turning off View > Proof Colors.
    If that doesn't work, try Edit > Assign Profile and choose
    "Don't Color Manage This Document."
    If that doesn't work, try Edit > Color Settings and set
    the "Settings" to "Monitor RGB."

  • Illustrator CS6 color issues when saving JPG

    I have recently gotten rid of the Pantone+ color books and replaced them with the old color books, using the "Workaround 1: Replace Pantone Plus with older Pantone color books" help from Adobe. Followed all of the instrauctions and had no issues until two weeks ago. Then suddenly when saving PDFs I had to start changing the output Color Conversion to ' convert to destination'. I never had to take this extra step before. Now if I do not do this it saves some colors as black. Whatever, I got over that and take the extra step.
    TODAY, now I can't even save JPGs without color issues. Some JPGs save correctly. Then I use the same color in a different file, and it saves completely different. Same color profiles, swatch options, blah blah blah.
    Someone help me. I am extremely fed up with these issues. Like everyone else, this is my job and now it is making a huge impact on my work...

    What program are you using to view the PDFs?

  • Setting chart colors in palette.cxml

    I've modified the chart colors in two palette.xml files:
    /OracleBI/web/app/res/s_PeerApp/chartsupport
    /home/padmin/OracleBI/oc4j_bi/j2ee/home/applications/analytics/analytics/res/s_PeerApp/chartsupport
    Not working well at all – for both new and old charts, for any type (bars, line, pie) – sometimes display the new colors and sometimes the old ones. When I see the new colors and refresh the page, it sometimes return to defaults.
    Any ideas?

    In keynote you have a slide with a chart in it. I will use a bar chart for this example. Now that you have the slide with the chart you want to edit the colors of open, click on the "Colors" button at the top right of the Keynote window. Click on the wheel Until the box above the wheel displays the color you desire. Once you have that color chosen, click in that color box and drag it to the bar you want to have that color in your chart. Tada! You have now changed the color. I am on my iPhone or would have done some screen shots for you.
    Enjoy!

  • Bizzare Color Issue With JPEGs In RGB

    Recently when I've imported any jpegs from either the web or from my Thinkstock account I get strange color issues when it opens the image. Mostly the distortion happens in the whites. By default it opens in RGB mode (figure 1) and the issue goes away if I convert to CMYK mode (figure 2) but the image needs to be in RGB for me to use in an After Effects comp. Is there some step I'm missing in my color management? Thanks!

    Make sure you install the 10.9.1 update.
    Another test you can do is disable GPU drawing in Photoshop's preferences, then relaunch Photoshop.
    If the problem goes away, then it was caused by the video card driver (or, possibly by a defect in the GPU, but those aren't as common).

Maybe you are looking for