Chart display - pen limitations

I am trying to plot the percentage of occurences of certain Reasons in a chart. To explain I have a set of values as listed below in two columns:
Reason1   10%
Reason2   20%
Reason3   40%
Reason4   30%
So when I use a Pie chart I get the graphical representation, where each reason is shown in a different color(pen color) inside the circle.
My question is suppose the no. of Reasons exceed 32 (the maximum possible pens in xMII), how can I show them in a graph? Appreciate your help.

Srinivasan,
As a suggestion for a work around, display a Pareto chart with the Top 9 reasons and then for the tenth show 'Other' and have that as the sum of the rest of your 23+ reasons. If the user then needs further detail capture a selection event on the chart and popup and additional chart that displays a breakdown of the values for other, or simply display them in a grid below. Hope this helps.
-Sam

Similar Messages

Problem with chart displaying data correctly

I have created a bar chart that displays data for each day of the month. The majority of the time this chart displays the information corrrectly. However now and again the bars of the chart appear much larger than they should meaning that instead of showing 30 or 31 seperate bars it can only display half that amount due to the increased size of the bars. If you display the same chart again then the problem will often disappear.
I am using Coldfusion MX 7 version 7.0.2 Enterprise Edition. Ihave installed all the latest updates up to Cumulative Hot Fix 3.

Hi,,
I have checked that the data being passed is correct and it seems to be. Chart code below.
Thanks
<cfchart chartwidth="700"
   chartheight="300"
   pieslicestyle="solid"
   show3d="no"
   showlegend="no"
   fontsize="12"
   xoffset="0.0"
         yoffset=".0">
<cfchartseries type="bar"
   query="chartquery"
   serieslabel="Date_Accessed"
   valuecolumn="namecount"
            itemcolumn="date_created">
    </cfchart>

Problem with Chart display in WAD

Hi All,
We have a Web Report in which we want to display the data in <b>table</b> format and also in <b>chart</b> format. We have two tabs : Data display and Chart display.
In Data display tab we want the data in table format and in the Chart display tab we want the data in Chart format.
Problem we are facing is that we are getting both table and chart displayed in the Data display tab. We want only the table in this tab and want to hide the chart which is coming there.
Please help me on this.
Thanks in advance,
Prakash

Try to use hide an unhide commands:
<a href="<SAP_BW_URL ITEM='GR' MULTI='X' HIDDEN='X' CMD_1='ITEM=GR1&MULTI=X&HIDDEN=''>
In this example, all Items containing GR are hidden and in a second step, all Items containig GR1 are displayed.
Regards,
Beat

Pie chart display error

Hi
I created pie chart using CFCHART tag. In the chart display,
data values overlap on one another in the display. How to rectify
this error.
Kindly help me in this regard.
Advance thanks

I am using ColdFusion Report Builder 9 to generate a PDF, so there is no code to provide, but here is an example of my data:
fruit
count
apples
112
oranges
304
bananas
0
pears
0
grapes
16
strawberries
80
plums
48
pineapples
32
blueberries
16
raspberries
32
apricots
256
tangerines
705
cherries
1
peaches
0
With 'label column: fruit' and 'value column: count', when I select 'data label: pattern', for my pie chart, the labels overlap.

Chart displays real quick

I am using buffered data acquisition and i acquire at the rate of 20,000 samples per second and i write my data to a binary file. The problem is I view my data in a chart when recording the data. The chart is too fast, I want to reduce the speed of the chart say at around 2000 samples per second but i want to record data at 20,000 samples per second. Is there a way so that the chart displays my data at a slower pace?
Thanks,
Oxygen

see attached vi.
just pass the data array to the decimate function as illustrated.
Attachments:
Decimate array.vi ‏79 KB

0PUBLISHING_TEMPLATE chart display

Hi,
We have BW3.10. I set up a web template with a ROLE MENU item as the navigation frame, and the result gets loaded in the 0PUBLISHING_TEMPLATE in another frame. When a query is selected, in the application toolbar, there are chart options - bar, pie, line, etc. However, it does not work correctly because, for example, bar chart and pie chart displays exactly the same graphic.
Does anyone know what I need to do in order for the chart to display correctly?
Thank you very much.
Hsiao-Chun

Hi,
Usually 0QUERY_TEMPLATE is the default template for any query you run from BEX query designer whcn you use 'Display in web' option.
But you can create a new web template and use your query.
Insert this code into your web template for the correct toolbar,

<table>
<tr><td style="padding:5px;">
<table cellspacing="0" cellpadding="1" border="0" class="SAPBEXNavLineBorder" width="450"><tr><td width="100%">
<table border=0 cellspacing=0 cellpadding=5 width="100%"><tr>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=*GR1*&MULTI=X&HIDDEN=''>"><img src="Mime/BEx/Icons/S_B_TVAR.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="622">"></a></td>
<td class="SAPBEXNavLine"> |</td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=GR1GR2NavBlock&HIDDEN=' CMD_2='CMD=RESET_ITEM&ITEM=GR2Chart&WIDTH=600&HEIGHT=400&HIDDEN=&ITEM_ID=0QUERY_TEMPLATE_COLUMNSTACKED&GENERATE_CAPTION='>"><img src="Mime/BEx/Icons/S_GISBAR.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="657">"></a></td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=GR1GR2NavBlock&HIDDEN=' CMD_2='CMD=RESET_ITEM&ITEM=GR2Chart&WIDTH=600&HEIGHT=400&HIDDEN=&ITEM_ID=0QUERY_TEMPLATE_PIES&GENERATE_CAPTION='>"><img src="Mime/BEx/Icons/S_GISPIE.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="658">"></a></td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=GR1GR2NavBlock&HIDDEN=' CMD_2='CMD=RESET_ITEM&ITEM=GR2Chart&WIDTH=600&HEIGHT=400&HIDDEN=&ITEM_ID=0QUERY_TEMPLATE_LINES&GENERATE_CAPTION='>"><img src="Mime/BEx/Icons/lines.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="659">"></a></td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=GR1GR2NavBlock&HIDDEN=' CMD_2='CMD=RESET_ITEM&ITEM=GR2Chart&WIDTH=600&HEIGHT=400&HIDDEN=&ITEM_ID=0QUERY_TEMPLATE_3DCOLUMNS&GENERATE_CAPTION='>"><img src="Mime/BEx/Icons/columns_3D.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="660">"></a></td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL CMD='SWITCH_AXES' DATA_PROVIDER='DP'>"><img src="Mime/BEx/Icons/S_B_RESH.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="312">"></a></td>
<td class="SAPBEXNavLine"> |</td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=*GR3*&MULTI=X&HIDDEN='>"><img src="Mime/BEx/Icons/S_B_TXDP.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="T70">"></a></td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=*GR4*&MULTI=X&HIDDEN='>"><img src="Mime/BEx/Icons/S_BWEXMO.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="281">"></a></td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='*GR*' MULTI='X' HIDDEN='X' CMD_1='ITEM=*GR5*&MULTI=X&HIDDEN='>"><img src="Mime/BEx/Icons/S_SUMMAR.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="282">"></a></td>
<td class="SAPBEXNavLine"> |</td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL CMD='PROCESS_VARIABLES' VARIABLE_SCREEN='X'>"><img src="Mime/BEx/Icons/S_B_VARB.gif" valign="middle" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="T76">"></a></td>
<td class="SAPBEXNavLine"> |</td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL ITEM='QueryDesigner' HIDDEN=' '>"><img src="Mime/BEx/Icons/adhoc_querydesign.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="320">"></a></td>
<td class="SAPBEXNavLine"> |</td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL CMD='BOOKMARK'>"><img src="Mime/BEx/Icons/bookmark.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="309">"></a></td>
<td class="SAPBEXNavLine"> |</td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL CMD='EXPORT' FORMAT='XLS' DATA_PROVIDER='DP'>"><img src="Mime/BEx/Icons/S_X_XLS.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="T77"> <SAP_BW_TEXT program="SAPLRRSV" key="T72">"></a></td>

<td class="SAPBEXNavLine"><a href="<SAP_BW_URL CMD='EXPORT' FORMAT='CSV' DATA_PROVIDER='DP'>"><img src="Mime/BEx/Icons/csv.gif" border="0" alt="<SAP_BW_TEXT program="SAPLRRSV" key="T77"> <SAP_BW_TEXT program="SAPLRRSV" key="T73">"></a></td>


</tr></table>
</td></tr></table></td></tr>
</table>
Thank you
Arun

MTA - CNMT Chart display issue

hi All,
I am having issue displaying all the 'Milestones' associated to a Network in CNMT.
Milestones created are checked with 'Trend Analysis' checkbox in 'Milestone - Basic Data' tab.
The activities are 100% confirmed and the Actual date of the activity is copied over to 'Actual date' field for the Milestone.
I checked the graph axis to display the 'Date range' which falls within the 'Actual Dates' of Milestones. It is showing only 'One' milestone, but not others (there are 2 more milestones which fall in the same date range and the activity is 100% confirmed).
Please suggest if I am missing something here.
-thnx in advance

Yes, I did create a new project version and Saved it Via CN41. The Data has been refreshed via Edit -> Scope of current data -> All fields in CN41. The chart is still showing only 'ONE' milestone.
Ex: The milestone currently being displayed in the chart is related to an activity which was confirmed on 26 Dec 2011. There are two more milestones related to two different activities which were confirmed on 30 Dec 2011, 10 Jan 2012. These are missing from the chart display.
Moreover, the system displays the following message:
Diagnosis
You have restricted the number of milestones to be displayed by using operative milestone data.
Procedure
To display all the milestones for the project, choose View -> Historical milestones.
SAP Library states:
Historical curve:
This standard view displays those milestones that have the MTA indicator set at the time of the current report.
These milestones are displayed across the entire reporting period, also when the indicator was not set for them at an earlier reporting time.
The Historical Curve is what I am assuming is needed to display all the Milestones on a particular reporting date. I checked in CNMT -> View -> Choose Dates, which shows the Milestones & Reporting times. I guess I am missing something else.
Please advise.
Edited by: sdn sap on Jan 13, 2012 8:40 AM
Edited by: sdn sap on Jan 13, 2012 8:41 AM

[WPSL]Shell toast notification displaying only limited contents in push notification windows phone

Hi, I have implement push notification services for my Windows app . I used shell toast to display the notification on my app. The notification does come through but is cut-off - displaying only limited contents, I need the whole
set of contents to be displayed on the notification. I don't have much idea of windows app 's push services , can any one help please ?
Nikitha

Hi Nikitha,
This is by design, ShellToast will only show the limited content, this is consistent with the design principle of notification, see
https://msdn.microsoft.com/en-us/library/windows/apps/hh465391.aspx
Present information in the simplest possible form. If your content doesn't require a headline, omit it. A message such as "Your download is complete." is entirely complete and needs no additional presentation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Shell toast notification displaying only limited contents in push notification windows phone

Hi, I have implement push notification services for my Windows app . I used shell toast to display the notification on my app. The notification does come through but is cut-off - displaying only limited contents, I need the whole
set of contents to be displayed on the notification. I don't have much idea of windows app 's push services , can any one help please ?
Nikitha

Hi Nikitha,
This is by design, ShellToast will only show the limited content, this is consistent with the design principle of notification, see
https://msdn.microsoft.com/en-us/library/windows/apps/hh465391.aspx
Present information in the simplest possible form. If your content doesn't require a headline, omit it. A message such as "Your download is complete." is entirely complete and needs no additional presentation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Display Template limitation of 50 items

Hi,
is there a way to get over the Display Template limitation of 50 items?
keren tsur

I found a workaround to this limitation and have blogged about it here:
http://www.scottewing.net/Blog/Post/2/Getting-Around-the-Content-Search-Web-Part%27s-50-Results-Limit
It requires writing server-side code using reflection and deploying a farm solution, so if you don't have that option then you may be stuck. There's also a client-side solution here but it doesn't work for anonymous access:
http://sharepoint-community.net/forum/topics/how-to-override-content-by-search-web-part-s-limit-of-50-results
In most cases I'd agree that you shouldn't show more than 50 results on a page. However, I believe there are almost always exceptions to every rule. In my case, I needed to go over this limit because we were porting a WordPress site
over that had a page that needed this, and we needed it to behave the same way.
- Scott

Access 2010 Charts - Query runs but Chart displays black screen

Hi,
I developed a db in MS Access 2007 on my old PC and everything worked perfectly. After trying to open it on my new PC using Access 2010 the db works except the charts display as a black area.
After a bit of playing around I can say for certain that the queries for the charts are running correctly, (and of course the colouring of the chart is correct).
I tried deleting the charts but I got an error message saying "cant find the OLE library".
As I'm relatively new to creating exe files for transferring db's I'm thinking I need to bring the ole library with the db?? but I cant seem to find it on my old pc (maybe being stupid)
Please could you tell me if I'm barking up the wrong tree with this, or if there is a simple fix that I'm overlooking?
Many thanks
Tom.

I was having this exact same problem, then it just stopped. I am using the nouveau driver and I have a tnt2 card.
IIRC, I was having an unrelated problem with xorg or udev or something was having problems detecting my monitor, it claimed I had two monitors connected, I wrote an xorg.conf file and that fixed the problem. IDK if its is related or not because I don't recall exactly when things started working when I would switch ttys.
Try using the nouveau driver and see if it does the same thing, it has a kernel module so it might make difference,
Last edited by RiceKills (2010-07-06 23:39:27)

XY chart display(multiple plots) --help required

Hi All,
I have problem in showing data(scale on y-axis)..on the xy-chart display...
Chart contains 2 plots...
1.length vs 1st Speed
2.length vs 2nd Speed..
my problem is with the scale on y-axis and plotting 1st speed and 2nd speed(on y-axis..) with respect to length(on x-axis)....
I attached my front panel window diagram for ur kind help....
I can able to view the plot on the chart....but the plot's are not like plots...they are plotting like in straight lines
One more Doubt ....in some chart if we right click it ..we can able to view the chart history length....
but in some chart ...why it's not appearing when we right click it ..
In that cases how we can set chart history size length...or how to enable the option.....
Regards
Rajasekar
Attachments:
speed251.vi ‏433 KB
Front-panel2.PNG ‏110 KB

Dear friend,
First i misunderstood the concept...now i am clear with the graph and chart concept..Since i am new user to Labview....
I need the xy-graph behaving like chart..with history length..(data acquistion type by serial)..
Now i am completed the task...with the examples comes from NI example finder..but i need clarification.....
I attached my vi...could u please see through it....
if u see the attached front panel diagram named front-panel.png file...in that the xy-chart is showing a straight line...
This is where i am facing problem...It should be continous instead of straight line....
Latter i find that this problem is because of history length problem of xy-graph.
so i added buffer.vi..(sub-vi) available in variable-time xy-chart example to overcome this issue..
Please say ur suggestion...
Attachments:
Front-panel2.PNG ‏110 KB
speedhistorylength26.vi ‏434 KB

Chart display and camera trigger

Hello,
I’m new to Labview and using it for my thesis to acquire data and initiate the image capturing of a camera. But I came across some problems with the data display and camera trigger, if anyone could offer some advice
My Hardware consists of a MC-USB-2404-UI DAQ-device (including MCCdaq-Drivers with Ulx-Libary and an extra LV vi pallet), a thermocouple type K and a TEMATEC pressure sensor MAP350-S / F (0-10V/0(4)-20mA). Since the DAQ-device supplies itself through USB with just 5V Power, I connected the pressure sensor in series with an additional 10V power supply unit.
The VI that I am constructing should read the measured values (pressure and temperature) and display them in a chart and on a numerical indicator. Above 200°C and 200bar the data logging should be manually started and a high-speed camera simultaneously triggered. Apart from the camera trigger, the VI is almost complete except for a few problems with measuring the value display.
Here are my problems:
1) How can I initiate the camera simultaneously with the data logging? Since the hs camera will capture more than 1000fps, I would restrict the image acquisition to a simple trigger that initiates the capturing. The appropriate VI’s IMAQ and IMAQdmx are already available. Should I create a new loop and connect it to my case-structure through a Rendezvous? And what kind of vi’s do I need for a simple trigger?
2) Also I couldn’t figure out how to convert 1D-Array of Waveform to DBL or at least how to connect the data wire with a numerical indicator. The indicator is crucial for the manual start of the data logging.
3) Another problem is with the chart display. As soon as I start the data logging, the graph disappears and the chart displays only n-samples of the currant loop pass. The enlargement of the chart length history brings no improvement. Before the data logging is started the charts are showing the all points from the start. So what changes when I Press “Aufnahme starten” (start acquisition)?
Any ideas would be much appreciated.
Attachments:
Blockdiagramm.png ‏153 KB
Frontpenal.png ‏172 KB
Temp+Druck_daqmx.vi ‏595 KB

Hello annaei,
thanks for your quik help... the numeric indicator is now implemented. thanks to you.
Explaination:
1) I have construkted an experimental vessel, which builds up pressure through a stamp. There is a heating jacket around it and on the bottom is a sight glass to capture the intirior with a highspeed camera. The starting conditions for the experiment are 200bar and 200°C. So I will need to monitor the current state of the intirior to know when i can start the actual data logging. With the data logging i want to start my image acquisition silmutaneasly.
3) For the Chart problem i attachted two pictures... After experimenting with the sample clock, reading vi and timing of the loop, i figured out that the greatest influence is the loop timing.
At 250ms (wait Xms multiple for loop pass) there is all data displayed even if i press the data logging button. At 100ms i was logging the data from 5s on and as one can see in the picture below the graph disappears after 28s. At 20ms loop pass interval the graph disappears randomly and with the data logging activated it is just a single point displayed.
In general the 250ms loop pass interval is a totally suitable solution for me, but i just can't help the feeling that the problem is not resolved. And i would like to know what i am doing wrong or what i could do better.
Thanks, Tobi.
Attachments:
mit 250ms multiple loop pass.png ‏171 KB
with 100ms multiple loop pass.png ‏160 KB
Temp+Druck_daqmx.vi ‏600 KB

My App Store is showing white screen on features and charts display

My App Store is showing white screen on features and charts display. Any ideas what I should do?

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Crystal 2008 Pie Chart Display Issues

Hello all,
I am having some problems with the Crystal Viewer displaying charts and legends. Basically, what is going on is, I have a report that displays a pie chart and legend containing data on departments within a store. I have 39 departments that need to show in the chart/legend, but only about 33 show up on the chart and 24 show up in the legend. Does anyone have any ideas if this is a limitation of the chart or anything?
TIA
-Coty

There is no limitations for pie chart and legend. maximise the chart through edge draging.it shows all(increase the chart size)...
All the best,
Praveen

Chart display - pen limitations

Similar Messages

Maybe you are looking for